Firefox 3.6.3 - ebay pages are centered, do not display full width of screen

Upgraded to Firefox 3.6.3 and my ebay pages are centered and do not display full width of screen as they did in the previous version. Most other pages will automatically adjust to the full width of the screen
== This happened ==
Every time Firefox opened
== Firefox 3.6.3 upgrade

See if anything here helps you. 
https://support.mozilla.com/en-US/kb/Images+or+animations+do+not+show

Similar Messages

In the Firefox browser, when i click button in ADF page, then popup the OAF page in iframe tag,and then when i click the PPR bean in OAF page, then Firefox browser reload to ADF page. This is not the right response,browser should not reload the ADF pa

In the Firefox browser, when i click button in ADF page, then popup the OAF page in iframe tag,and then when i click the PPR bean in OAF page, then Firefox browser reload to ADF page. This is not the right response,browser should not reload the ADF page.It should stays in OAF page or goto another OAF page. and in other browser such ad IE,We get the right response.

hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
[[Fix problems connecting to websites after updating Firefox]]

Acrobat 9 Pro: Message "An error exists on this page. Acrobat may not display page correctly.

Hi everyone,
I posted this in September: "Over the past week, I have received pdfs from 2 different graphic design contractors that do not open correctly in Acrobat 9 Pro. There is an error in the document and when I scroll to the page where the error is, I get: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." I did this, and the contractor remade the pdf 3 times, and I still couldn't open it. This contractor is already using CS5. For the problem today, I haven't asked for it to be remade yet--decided to see if I could find out if anyone else is having the same problem. The second contractor is using CS4. The only thing that I have done differently at my end over the past week is upgrade CS4 to CS5. I already had Acrobat Pro 9 so I didn't update it when I updated my CS5 products. Should I have upgraded Acrobat 9 anyway? Somehow, it doesn't feel right that this is the problem. Any info on this would be appreciated."
I got one response from that posting, suggesting that the pdf was corrupted over email. That wasn't the problem.
What I didn't say above is that whenever I got an error message upon opening the pdf and clicked OK, I got another message: "Insufficient data for an image." I found that one or all of the images in the pdf were missing. Upon further investigation, the contractor and I found that sometimes the error message pointed to a specific font used--that being a Helvetica Bold font. Once we substituted it with a Helvetica Neue LT Std Adobe Opentype font, we no longer had an issue.
However, the problem rose it's ugly head today--what, 6 months later! I'm talking about 2 different pdfs this time.
For PDF#1, I got this error message about the font: "Cannot extract the embedded font 'JNAGNS+HelveticaNeueLTStd-Bd'. Some characters may not display or print correctly." When I click OK, I get another: "Insufficient data for an image." The images don't show up in the pdf. What I don't understand about this pdf is that this is one of those that was fixed in September. The only changes made in the document was to paragraph text--none to the text in the images. When I opened the revised pdf today, I am getting the same message again. This makes no sense.
I returned to my September blog to see if any further advice had been posted, but nada--not even anything from Adobe about it. I goggled until I found where someone suggested running a "Report PDF syntax issues" analysis in Preflight. I did that and even though the analysis showed the pdf passed, I checked the fonts in the list and saw that the one pointed to in the error message showed that a long list of glyphs were missing on both pages of the pdf. I have asked my contractor to replace her font with a new one, in case it has gotten corrupted. Haven't a new pdf to open yet.
Then when I opened PDF#2, I got the message: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." When I ran the "Report PDF syntax issues" analysis in Preflight, I found got this warning: "Invalid operand(s) for operator (1 match on 1 page)". I clicked through and under "Page Description Errors/Invalid operand(s) for operator", it identifies Operator Name, Stream State, Operators Read, and Traversal Path. Under "Trigger Values" is says "Invalid operand(s) for operator: is true". None of this means a thing to me so I can't figure out what the problem is.
Let me say this: Both the contractor and I are using CS5 and Acrobat Pro 9, on Lion. If it helps, the contractor also sent one of the problem pdfs back in September to my boss who is running Acrobat Pro 9 on Windows 7 and she got the same messages.
Does anyone out there have a suggestion for us? PLEASE HELP!!!!

Thanks to all for posting suggestions. As it turned out, the contractor who was having a problem reinstalled Acrobat 9. She works from home and is emailing the pdfs to me. Things were running smoothly until this past week, when the problem started again. Whenever I get a pdf that won't open properly or print, I asked her to zip it and it is no longer a problem. Last week, I had the same problem start with a contractor in Florida and she also zips the pdf when there is a problem. Now I am thinking the problem might be at my end. I wonder if something is happening to them when they come through our firewall at work. I asked IT about it before but they didn't have a clue what the problem might be. Right now, zipping is the answer...who knows how long that will continue to work.

Firefox is not displayed correctly on USB-screen

Firefox 4.0 is not displayed correctly on USB-screen (Samsung SyncMaster LD 190). Firefox 3.6 was displayed correctly.
looks like an incompatibility problem between UbiSync and FF 4.0

You can try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Firefox > Preferences > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Firefox > Preferences > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but to use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You may have zoomed the page(s) by accident.
Reset the page zoom on pages that cause problems.
*View > Zoom > Reset (Ctrl/Command+0 (zero))
*http://kb.mozillazine.org/Zoom_text_of_web_pages

Why are animated gifs not displaying animations in the preview?

Why are animated gifs not displaying animations in the preview?
My coworkers and I are not seeing a animation in the preview pane in Adobe Bridge CS6 even when clicking the play button in the preview window. However, we do see a graphic of the first frame and one person sees 1 frame when clicking play and one other frame and then the animation stops, however, that is not the complete animation.
I'm using Windows 7 32 bit
My coworkers are using a mac.
One coworker has apple OS Mountain Lion with a Intel Quad-Core Xeon – 64 bit system.
Is this fixable or in the works as a patch? Otherwise we have to open these docs in a browser in order to view them properly.

I've just come to the realization that some animated gifs do play fine and others do not. A coworker of mine suggests that if it's an animation made via Adobe Photoshop, it'll work in bridge but will not if it's made using something else.

Print Problem - PDF is OK on Windows 7, but OK on Windows XP with "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."

I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
I have tried Acrobat 9, 10 and 11.
Any advice (apart from use Windows 7! ) would be most welcome.
Many thanks.

If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
Is this a local or online PDF?
If local, is the file really exactly the same?
If online, in what browser?

Acrobat 9 Pro: Message "An error exists on this page. Acrobat may not display page correctly. Please

Over the past week, I have received pdfs from 2 different graphic design contractors that do not open correctly in Acrobat 9 Pro. There is an error in the document and when I scroll to the page where the error is, I get: An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." I did this, and the contractor remade the pdf 3 times, and I still couldn't open it. This contractor is already using CS5. For the problem today, I haven't asked for it to be remade yet--decided to see if I could find out if anyone else is having the same problem. The second contractor is using CS4. The only thing that I have done differently at my end over the past week is upgrade CS4 to CS5. I already had Acrobat Pro 9 so I didn't update it when I updated my CS5 products. Should I have upgraded Acrobat 9 anyway? Somehow, it doesn't feel right that this is the problem. Any info on this would be appreciated.

Thanks for the quick reply. Would zipping the pdf protect it through email...like I said, this is the first time I've had this problem and I've been getting pdfs though email for years.

Error in Acrobat 8: An error exists on this page. Acrobat may not display the page correctly...?

Hi,
We perform the e-signing on any PDF using our custom e-signature plug-in. Once that's done, when we try re-opening the PDF in Acrobat version 8.0.0.0, we get the following error:-
"An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem"
Please note that this error occurs intermittently and is NOT observed in Acrobat 7 or 9. Also, when a plain PDF is opened (i.e. a PDF without any signature on it) then there is NO error.
Could you let me know what could be the issue here? I read it in Acrobat 8.1.3 release notes that such an error was a known bug in version 8.0.0.0 (http://kb2.adobe.com/cps/407/kb407016.html), but I am not sure of its cause.
Let me know your comments/suggestions.
Thanks!

I am getting the same error even in Acrobat version 8.1.3.
Additionally, I noticed that if we click on menu ‘Advanced->Sign&Certify->Preview Document’, then we get a notification as “This document is not PDF/SigQ compliant and may display inconsistently”. On clicking ‘View report’ on that notification, the below dialog pops up. It has errors listed as:-
Code 4000 : Unrecognized PDF content. The document contains PDF content or custom content not supported by the current version of Acrobat.
Code 4002: PDF content contains erros.
However, if we sign the PDF using default adobe signature functionality and reopen that PDF, the error does NOT come and the notification also says ‘This document is PDF/SigQ compliant’.
Can anybody please suggest what could be missing in the custom sign that we apply? Is it because of any of the missing fonts or any other resources?
Awaiting reply!
Regards.

Reader 11.0.0.1 An error exist on this page. Acrobat may not display the page correctly. Please cont

"An error exist on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."
Any ideas how to get rid of this? Realistically its not practical to contact them, nor the other 1,000,000 web site owners whom host pdf's.
I really would like to disable the pop up only.
Seem to get it on quite a few PDF's. This web page seems to have quite a few that produce the problem.
http://www.2010.cannell.co.uk/manuals/manuals_porsche.html
click on the link to the pdf, scroll down a few pages and it pops up.
I do not get the error when using reader 10, only the new 11.0.0.1 version.

Hi Pat,
No problem withthe link you supplied.
This is one that has the problem "948 Cayenne Owners Manual - 2008 - Turbo" http://www.2010.cannell.co.uk/manuals/manuals_porsche.html
Just FYI, I look after 8000 clients, have the same problem on 3 of my test machines.
All windows 7, 64 bit IE9 fully patched.
Using 32 bit IE
Testing prior to upgrade from 10 to 11

Ever since I upgraded to firefox 3.6.15 the pages are loading extremely slowly, why?

I use a MacBook pro - about a year old and I have OS 10.6.6 installed. Ever since you pushed firefox 3.6.15 to me the pages are very slow in loading. Is it a cache problem? A second visit to the same page loads faster. sometimes it is slower than others and I don't know why. I have done a speed check on uploads and downloads and all seems to be fine.

I can get the photos to display in 3 columns if I do this:
orange Firefox button ''or'' classic Tools menu > Options > Content
In the Fonts & Colors section, click the Advanced... button.
Change '''Minimum Font Size''' to '''None''' and OK out of Options.
But most people are not going to do that. I prefer a minimum font size of at least 10.
So... how to fix it. The way the thumbnails are sized is that they are 10em with a base font size of 5px. If the minimum size is set to 10px, the pictures double in height and width.
It would make more sense if the base font size in your stylesheet was larger. Can you edit it? If so, try doubling the font size and halving the relative image size:
In http://languagesofourancestors.spruz.com/dhtml/corestyle/xstyle.css
 /*All Cards Small*/
.SUI-UserPic.small, .SUI-ImageCard.small, .SUI-VideoCard.small { font-size: '''10px''';}
 /* User Pics */
(4 lines down)
.SUI-UserPic .SUI-CardImage { display: block; width: '''5em'''; height: '''5em'''; overflow: hidden; border: 1px solid #aaa; border-radius: 2px; -moz-border-radius: 2px; -webkit-border-radius: 2px;}
.SUI-UserPic .SUI-CardImage img { width: '''5em'''; min-height: '''5em'''; border: 0 none;}
.SUI-UserPic .PopInfo {line-height: normal; display: none; width: 140px; position: absolute; z-index: 2; top: '''4em'''; left: 0; margin: 0 auto;}
I think that will be more broadly compatible. There may well be some details I've missed, but hopefully this helps.
I don't know why the minimum font size wasn't applied this way in Firefox 3.6, but I suspect this is the new normal.

Safari 4.0.3 running OSX 10.6.1 - Pages are loading but NOT thumbnails?

Just upgraded to OSX 10.6.1 running Safari 4.0.3 last week - everything was working BEFORE the upgrade - but now for some reason I have an issue where pages ARE loading including larger banners, text flash animations etc, but if the site contains small thumbnails they are not loading.
The icon in the web bar spins and spins for ages and then suddenly where the thumbnails should be I get the blue question make as if the links are broken - which there not as this is happening to well know sites such as youtube gettyimages and ebay and its just to the thumbnails?????
Take ebay for example, the homepage page loads in fine, and if I search for a product - the page with the listing all loads but not the thumbnail images, yet if I click a listing the full page loads without a problem?
Any advice, I have cleared the cookies and javascript database all to no avail?

HI,
Try Safari Maintenance
Carolyn

Firefox does not display full page

I have an application that is being served from a mainframe HTTPD server. The pages do not display correctly in Firefox. I have a column of icons on the left side of the webpage. Each icon will display information on the rest of the webpage in multiple frames. There is a black bar at the top of the screen. My webpage is above this black bar. I have to pull down the black bar to see my webpage. I also tried this in Firefox safe mode (same results). Every time I click on an icon to open the webpage, I have to pull the black bar down again. How can I get my page to display correctly? I installed the "IE TAB 2 extension" and that didn't help.

I already tested in Firefox safe mode which removed extensions and plugins. I am including 2 files. 1) A screen shot with the black line at the top of the screen. 2) A screen shot when I pull down the black line. When I pull down the black line, the application webpage is visible. Note: I have a dual monitor setup so the captured Paint screens are twice as wide.
The Firefox troubleshooting information is as follows.
Application Basics
Name: Firefox
Version: 28.0
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:28.0) Gecko/20100101 Firefox/28.0
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Symantec Vulnerability Protection
Version: 12.2.0.5 - 1
Enabled: false
ID: {BBDA0591-3099-440a-AA10-41764D9DB4DB}
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
browser.places.smartBookmarksVersion: 6
browser.sessionstore.upgradeBackup.latestBuildID: 20140314220517
browser.startup.homepage_override.buildID: 20140314220517
browser.startup.homepage_override.mstone: 28.0
dom.mozApps.used: true
extensions.lastAppVersion: 28.0
gfx.direct3d.last_used_feature_level_idx: 0
network.cookie.prefsMigrated: true
places.history.expiration.transient_current_max_pages: 103957
plugin.disable_full_page_plugin_for_types: application/pdf
privacy.sanitize.migrateFx3Prefs: true
Graphics
Adapter Description: ATI Radeon HD 3400 Series
Adapter Drivers: aticfx64 aticfx64 aticfx32 aticfx32 atiumd64 atidxx64 atiumdag atidxx32 atiumdva atiumd6a atitmm64
Adapter RAM: 256
Device ID: 0x95c5
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16571)
Driver Date: 1-26-2011
Driver Version: 8.821.0.0
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 10
Vendor ID: 0x1002
WebGL Renderer: Google Inc. -- ANGLE (ATI Radeon HD 3400 Series Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.3
Version in use: 4.10.3
NSS
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSSMIME
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSSSL
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSUTIL
Expected minimum version: 3.15.5
Version in use: 3.15.5

Pages 5.0: Does not display PDF logo in header

Pages 5.0 breaks all my work templates by not displaying the PDF company logo we have in the header.
Logos in imported Pages 09 documents are removed, inserting a PDF logo into the header is impossible.
This is the Pages 09 behaviour.
Until this is fixed, workarounds are appreciated.

Hm... Sorry then, but in my case, my documents had png logo in Pages 09 and were converted to Pages 5 with my logo without any problem:

When I test the web dynpro page, the browser does not display it !

Hi all,
I have (SAP EHP 2 for SAP NetWeaver 7.0) trial version installed in my laptop. Lately, I took course NET310 about web dynpro. I started doing the exercises but when I test my work, the browser (Internet Explorer 8) does not display the page I created but it displays a page has the following message (Internet Explorer cannot display the webpage). When I installed the SAP, one of the requirements was (Domain), so I entered one but the one I entered does not exist. If this is the issue, then I have to create a domain with the same name but how can I do this in my laptop? (my laptop has Windows 7)

Hi Anil
the page shows the following:
Bar Address:
http://tip-pc.ahmed.com:8000/sap/bc/webdynpro/sap/znet310_intr_00?sap-language=EN
Page:
Internet Explorer cannot display the webpage
What you can try:
Diagnose connection Problem (button)
More information
This problem can be caused by a variety of issues, including:
u2022Internet connectivity has been lost.
u2022The website is temporarily unavailable.
u2022The Domain Name Server (DNS) is not reachable.
u2022The Domain Name Server (DNS) does not have a listing for the website's domain.
u2022There might be a typing error in the address.
u2022If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section.
For offline users
You can still view subscribed feeds and some recently viewed webpages.
To view subscribed feeds
1.Click the Favorites Center button , click Feeds, and then click the feed you want to view.
To view recently visited webpages (might not work on all pages)
1.Click Tools , and then click Work Offline.
2.Click the Favorites Center button , click History, and then click the page you want to view.

XML Publisher report output in RTF format does not display full page

Hi,
We have one XML Publisher report, the output of report in RTF format is not getting displayed in Full Page in normal way (MS Word -->View menu --> Print layout) but we can see full page display when we do MS Word -->View menu --> Outline.
Appreciate your valuable inputs on this.
Is this a template issue or any profiles needs to be set.
Thanks
Vijay

Do you have any header and footer on your template?
If you have any header and footer then try to adjust it as of to display full page.
Thanks
Yasar

Firefox 3.6.3 - ebay pages are centered, do not display full width of screen

Similar Messages

Maybe you are looking for