Firefox 4 is not playing well with Microsoft Office 2010 32-bit on my Windows 7 64-bit laptop.

Since I loaded Office 2010 Firefox 4 has been acting up. Sometimes you can click on a FF4 window and it will not activate. Other times, when you are trying to select an item from a listbox, you can not select it. The listbox closes without anything being selected. FF4 worked fine until I installed Office 2010 32-bit. (from the HUP program so the price was right.) IE9 seems to work fine.

Hi ITBobby85,
If the excel version in the Connection Manager is Microsoft Excel 2010 (.xlsx), we should use Microsoft.ACE.OLEDB provider.
We can't install 32bit and 64bit parts of office on the same machine. We will get an error as you said when we run the installer to install the 64bit version of the Microsoft Access Database Engine 2010 Redistributable in the machine where a 32bit version
of Microsoft Office installed. To fix this issue, please download and install the 32bit version of the Microsoft Access Database Engine 2010 Redistributable with the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Can I get an older release of Firefox? 36.0 does not play well with Windows 7.

Firefox 36.0.4 does not play well with Windows 7. If it opens at all, it freezes within a minute so the screen goes pale and I get the classic spinning circle of death. Then the header says (not responding).
Ideally I would like to drop back to version 32 or 33, but 34 and 35 had fewer problems.
Can I find older versions anywhere?

You can [[Install an older version of Firefox]] any time. But which will cause significant security risk. So If you can't use the latest version of Firefox, we recommend that you use the latest version of another browser.
If the latest version of Firefox is causing problems for you or you just don't like something about it, please give us feedback about it here:
[https://input.mozilla.org/en-US/feedback/ Submit your feedback and suggestions about Firefox]
Anyway head for the ftp for older version but please be careful with these: ftp://ftp.eu.mozilla.org/pub/firefox/releases/

Since my IPOD Touch upgraded to IOS 8.1.2 it will not play well with my 2013 Charger's UConnect entertainment system. It will not build a library so I can not Browse or Shuffle. The only thing Is there a fix for UConnect issue?

Since my IPOD Touch upgraded to IOS 8.1.2 it will not play well with my 2013 Charger's UConnect entertainment system. It will not build a library so I can not Browse or Shuffle. The only thing it does is list all the songs alphabetically when connected via USB.

- Contact the manufacturer/go to their support site.
- Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
Sometimes and ISO update breaks compatibioity and a firmware update the the dock is required or an iOS update is required.
Downgrading the iOS is not supported by Apple.

SmartView 11.1.2.1 x64 compatibility with Microsoft Office 2010 x64

The SmartView 11.1.2.1 x64 is compatible with Microsoft Office 2010 x64?
After installing SmartView, Microsoft Excel does not recognize this supplement

11.1.2.2.300 the latest release of Smart View does support Office 64 bit. You can download the latest version here http://www.oracle.com/technetwork/middleware/smart-view-for-office/downloads/index.html or on My Oracle Support.
Remember SV is backwards compatible so the client version does not need to match the server version.

Compatible smart view version 11.1.2.1 with microsoft office 2010 x64

Hello,
My name's Antonio Marcos and i'm trying install smart view version 11.1.2.1 in version x64 the microsoft office 2010.
The documentation, says its compatible, but when installing an error occurs.
Anyone know how to solve this problem?

I'm confused. There's an Oracle Proactive Support blog entry that says it came in with .300:
https://blogs.oracle.com/proactivesupportEPM/entry/smartview_11_1_2_2
Even Matt Milella 'sorta' says it, here: SmartView 11.1.2.1 x64 compatibility with Microsoft Office 2010 x64
But then the latest New Features (http://docs.oracle.com/cd/E38438_01/epm.111223/sv_new_features/sv_new_features.html#sv_new_features_361) definitely lumps it into the 11.1.2.2 (no dot) bundle. And John Goodwin says it. So I apologize if I'm giving out bad information.
But this doesn't help the OP, who is on 11.1.2.1. :)

When does Oracle plan to certify EBS R11 & R12 with MIcrosoft Office 2010?

When does Oracle plan to certify EBS R11 & R12 with MIcrosoft Office 2010?

Hi,
Keep monitoring Steven Chan blog for such alerts/announcements -- http://blogs.oracle.com/stevenChan/
Interim Update #1: Microsoft Office 2010 and E-Business Suite
http://blogs.oracle.com/stevenChan/2010/05/interim_update_1_office_2010_ebs.html
Thanks,
Hussein

Is Mac Office 2011 compatible with Microsoft Office 2010?

Is Mac Office 2011 compatible with Microsoft Office 2010?

Ask on the Microsoft Mac forums: http://answers.microsoft.com/en-us/mac

Problems with Microsoft Office 2010

To whom it may concern:
I work in a school and we use Microsoft office 2010 here. Earlier this week (2) computers seemed to develop the same problem.
All of a sudden the entire Microsoft Office Suite seems to be taking a very very long time to open anything. For example trying to open a word document stored locally on the machine seems to take a while.
And, when using Outlook it seems that opening an attachment (word, excel, etc) seems to take forever. When you give a double click to the attachment, this red bar seems to start running across the top of the pane and it takes on average 1 minute to open
the attachment. This did not happen before and I am wondering if a recent update has anything to do with this issue.
Please advise.
Mark

Hi
For your issue, we recommend you start Office in safe mode to check the issue:
http://office.microsoft.com/en-us/excel-help/work-with-office-safe-modes-HP010140792.aspx
Scan your computer with antivirus software.
If the issue persists, do a repair for your Office suites in Conrol panel>Program and features>Office>Change>Repair
Regards
Tylor Wang
TechNet Community Support

Compatibility with Microsoft Office 2010 OneNote

Internet Explorer allows me, with one click of the "Send to OneNote" icon on the command bar, to send information from the Internet, along with a link back to the source, to Microsoft Office 2010 OneNote. It would be great if I could do this using Firefox instead, since that is my principal browser.
Is this possible?

Try this extension. <br />
https://addons.mozilla.org/en-US/firefox/addon/clip-to-onenote

Itunes 9.1 not compatible with microsoft office 2010

after installing ms office 2010 i notice itunes 9.1 will not sync the outlook info to any of my idevices
it returns this error message:
either there is no default mail client or the current mail client cannot fulfill the messaging request. please run microsoft outlook and set it as the default mail client.
funny thing is, its already the default mail client.
Message was edited by: ninja_pimp

Yesterday Apple confirmed that the iPhone 3gs will not sync with Outlook 2010 Beta 64 bit. Both the Genius Bar and Apple Care confirmed this after I took my new computer to the Bar. One even said this would not be fixed until the retail release of 2010, not just the enterprise release. This makes the iPhone just about useless for me. The 32 bit did work well before I updated with new hardware and the 64 bit version of 2010. I hope it is fixed very soon. I have Windows 7 Ultimate 64 bit installed.

Audition CS5.5 is not working well with Microsoft Mouse "smooth scrolling" feature

Hi,
I'm testing with the Audition CS5.5 and found that the mouse scrolling (I use it mainly for zoom, zooming in and out to see the waveform) is just not working well and sluggish, and finally I figured out it somewhat related to the "smooth scrolling" of Microsoft Mouse. Anyone with the same problem? In fact the scrolling is working very well for Audition 3.0.1, I don't know why it fail for CS5.5.
Best regards,
Steve

The trial version is the same as the full version except
for the 30 day limitation.
I think on windows xp you need sp3 for cs5 to work as expected.
Anyway that's what is says here:
http://www.adobe.com/products/photoshop/photoshopextended/systemreqs/
That may not be the problem, but it's a good place to start.
Also it's not a good idea to post your email on the forums.
MTSTUNER

ActiveX component could not be created in Windows 7 64bits, with Microsoft Office 2010 Sp132 bits

Good day to everyone:
We are experiencing an issue during the installation of a software for one of our clients. The software is EVSpc 5.0 builded in 32 bits version and provided by the MassHealth department for insurance verifications purposes.
The operative system in most machines is Windows 7 Professional 64 bits (which has C:\Program Files AND C:\Program Files (x86)), the Microsoft Office is 2010 SP1 32 bits. All office applications work perfectly in the system.
We run the installation of the software as the local Administrator (just as the installation instructions manual refers) and the installation it is completed. Then according the manual we have to refer the ODBC data sources to select the Microsoft Access
Driver (*.mdb) and the route of the database file (Access file) in the server. Finally we run the registration file to perform modifications in the registry. This is the registry file instruccions:
Windows Registry Editor Version 5.0
[HKEY_CURRENT_USER\Software\VB and VBA Program Settings]
[HKEY_CURRENT_USER\Software\VB and VBA Program Settings\EVS]
[HKEY_CURRENT_USER\Software\VB and VBA Program Settings\EVS\EVS]
"EquipmentID"="PCX33333"
"InstallPath"="C:\\Program Files \\EVSpc50\\"
When we tried to use the software this error message pops up:
"ActiveX component can't create object Exception in callAIMLoginService Error Handle Error Number=429 Error on LastDllError=0 Error HelpContext=1000429"
We have tried different suggestions found on Internet. Repairing the Office suite, Change the permission for the regedit file, register manually the dao360.dll, etc
We called the IT depaartment of MassHealth and the IT person in charge has left the job, and nobody knows why it isn't working.
Any help will be appreciated. Thanks.

You will have to locate and contact the software engineering team that put this package together. It is impossible to tell you what the problem is without the software engineers' detailed knowledge of the program.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Apple Mail in 10.8.2 not playing nice with MS Office 2011

After upgrading to 10.8 I am having some issues opening MS Office attachments in Apple Mail. When I click on any Word, Excel, or Power Point attachment I dialog box pops up stating "The attachment could not be opened....." I can choose which application to use to open the document, cancel or save. When attempting to choose the application, Office application are not available. The only way to open the attachments are to save them and open from the saved location or through the application itself.
Anyone running in to this issue or have an idea on how to sync up Mail and Office?
Thanks!

One thing springs to mind....
Had you previously moved the folder "Microsoft Office 2011" out of the Apps folder? or moved any of the Apps out of the "MS Office 2011" folder to somewhere else?
If so, try moving them back.
Jerry

Microsoft Excel cannot access the file "-". There are several possible reasons. Windows Server 2008 R2 with Microsoft Office 2010

I have a problem with starting the Excel Application under a particular user (service account).
I try to schedule this C# script through an application X (not Windows Task Scheduler. And this
application will always use a service account to run services on the server). If I run the C# script in
command prompt under the same user, it runs. Under the application X, which uses the exact same
user, to initiate the C# script, it fails to open the Excel application (not sufficient permission?).
This script calls application.Workbooks.Open(<ExcelFileName>,0,false,Type.missing....). At this line
of code, it gives the following error:
Microsoft Excel cannot access the file "...". There are several possible reasons:
-The file name or path does not exist.
-The file is being used by another program.
-The workbook you are trying to save has the same name as a currently open workbook.
I tried all the methods that I found online as follow:
Create directory "C:\Windows\SysWOW64\config\systemprofile\Desktop" (for 64 bit Windows) or "C:\Windows\System32\config\systemprofile\Desktop" (for 32 bit Windows).
Changed the DCOM config for the Microsoft Excel application to include this user for Local/Remote Launch and Access.
Enabled all macros in Excel application and set the Trust Center.
Add the user to have full control on all folders that contain the Excel file.
Under DCOM
config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other users can't run the excel application
on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
Yet, still the same error. I think it's permission but I am not sure where and what to do for this to work.
Now, normally, when I run this excel report, I can double-click on the file and it'd automatically run,
save the new parameters into the current file and generate a new excel file (with date attached to the
file name). That means there is a change (save) to the original file.
Environment: Windows Server 2008 R2 and running Microsoft Excel 2010.
I appreciate all your help!

I am wondering if this has anything to do with having the user log into Excel.
In point #5 above: Under DCOM config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other
users can't run the excel application on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
Because running with the launching user proposes an user to run the Excel application. However, I do not think there is any where that we can pass in the password for this user to Excel. However, this Excel has all the permissions to Excel application as
well as the folders that have the Excel files.
Please help!
Thank you!

My iPad and iPhone do not automatically synch with MS Office 2010 Outlook

My iPhone and iPad should automatically synch with MS Outlook (2010) on my PC. They did before, but now I have to synch manually again and I do not always get all the information synched even then. Help!

Try asking or looking in the dedicated iCloud on my PC forum - this forum is for the iCloud.com website.
Also, try these Apple Support articles:
iCloud: Troubleshooting iCloud Reminders and Tasks
iCloud: Troubleshooting iCloud Contacts
iCloud: Troubleshooting iCloud Calendar
iCloud: Troubleshooting iCloud Mail

Firefox 4 is not playing well with Microsoft Office 2010 32-bit on my Windows 7 64-bit laptop.

Similar Messages

Maybe you are looking for