"Firefox doesnot respond" is not the same as "crashed" When it does not respond the whole system hangs , qonsequently it is impossible to send a krasch report. The only wayto get the system working is to shut it down and restart it

During browsing for 3-6 pages F-fox hangs the system with a error message "Firefox doesnot respond" and dimming the screen.
Nothing else but switch of the computer and restart it.
After browsing for 3-6 pages it is the sam procedure.
No possibility to send a crasch report

Ask symantec why their prodcut won't allow you to run
other software and is freezing when you try to add
new rules?
Is your Norton subscription up to date?
I don't have Norton on my PC. I am of no further help
to you in configuring Norton.
You can use MSCONFIG to shut Norton off temporarily.
Using MSCONFIG to troubleshoot conflicts in
Windows
wouldn't that make me more vulnerable to viruses and kind of make my computer messed up?

Similar Messages

  • TS1591 i just got an ihome system and had trouble with it connecting to my iPhone.  I finally got it to work and now my itunes doesn't recognize my phone.  My software is up to date on both my Mac and my iPhone and I have shut everything down and restarte

    i just got an ihome system and had trouble with it connecting to my iPhone.  I finally got it to work and now my itunes doesn't recognize my phone.  My software is up to date on both my Mac and my iPhone and I have shut everything down and restarted.  Does anyone have any other suggestions?

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • When I close the lid on my retina MacBook Pro with Thunderbolt and it goes to sleep, I cannot wake it without shutting it down and restarting it.  Called Apple tech and they did not have a solution.  Any ideas?

    When I close the lid on my retina MacBook Pro with Thunderbolt and it goes to sleep, I cannot wake it without shutting it down and restarting it.  Called Apple tech and they did not have a solution.  Any ideas?

    Try these places:
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro
    Mac OS X Help 
    Isolating Issues in Mac OS
    http://support.apple.com/kb/TS1388
    https://www.apple.com/support/osx/
    https://www.apple.com/support/quickassist/
    http://www.apple.com/support/mac101/help/
    http://www.apple.com/support/mac101/tour/
    Get Help with your Product
    http://docs.info.apple.com/article.html?artnum=304725
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    Mac OS X & Mountain Lion Community
    https://discussions.apple.com/community/mac_os
    https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
    Recovery Mode
    http://support.apple.com/kb/HT4718 

  • HT3986 I got a plain macbook (not a pro) that I got on 2010 and I've lost the CD's that came with it, can I still download Windows7? If yes, can someone please send me a link where I can get the windows? Thanks

    I got a plain macbook (not a pro) that I got on 2010 and I've lost the CD's that came with it, can I still download Windows7? If yes, can someone please send me a link where I can get the windows? Thanks

    Thanks stevejobsfan0123 for the reply, I know I have to buy a disk but when I searched for it on amazon I read many reviews about saying that either it is inadequate or that it's a scam. Do you know any website where I can get a legitimate disk of windows7?

  • Mac mini (intel) frequently shutting itself down and restarting.

    My mac mini has started to immediately power down and restart on its own. I have been using different apps and even just while in the finder deleting old files and reorganizing. I tried a safe boot (holding down shift) and after that I had no audio!? after another restart (regular) it crashed again...I fear that i wont even be able to finish typing this... These crashes are really just the computer shutting down with no notice and resarting on its own... What else can I do here?

    Here is what you inquired about my system.
    1.25gb 667mhz DDR2 SDRAM (self installed)
    I run basic mac apps plus Adobe creative suite 2, quicktime pro, and recently downloaded the 30 day trial of Aperture...
    most of the files I have from the older PPC I used to have are on an external HD pictures and my music library.
    The Mac mini was new when purchased
    devices connected are: linksys 4-port router, D-Link cable modem, Klipsch speakers, a Lexar multi-card reader, Lacie 250GB external firewire drive, 20" Apple cinema display, apple wireless keyboard but a usb mouse (wireless mouse is a battery sucker!), occasionally I attach a panasonic PV-GS300 camcorder - but this has not been attached for weeks and the problem is newer than that.
    here is the entire panic.log:
    Mon Oct 9 06:15:20 2006
    panic(cpu 0 caller 0x0014141D): zalloc: "kalloc.64" (1360832 elements) retry fail 3
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x181e37a4 : 0x128b5e (0x3bc46c 0x181e37c8 0x131bbc 0x0)
    0x181e37e4 : 0x14141d (0x3bd178 0x3bc6fc 0x14c3c0 0x3)
    0x181e3844 : 0x12d780 (0x1730c10 0x1 0x181e3874 0x197101)
    0x181e3874 : 0x12d7a1 (0x30 0x1 0x0 0x17e6ea)
    0x181e3894 : 0x17944f (0x30 0x0 0x181e38e4 0x44d588)
    0x181e38b4 : 0x179bbc (0x44d588 0x4693000 0x0 0x0)
    0x181e3994 : 0x17c09b (0x44d580 0x4693000 0x0 0x1000)
    0x181e3aa4 : 0x17bdc9 (0x157ced8 0x4694000 0x0 0x181e3c40)
    0x181e3bb4 : 0x3957c2 (0x157cf3c 0x4694000 0x0 0x181e3c40)
    0x181e3c64 : 0x395a66 (0x165d1c00 0x0 0xde 0x1)
    0x181e3c84 : 0x3946a3 (0x165d1c00 0x0 0x8 0x1415c5)
    0x181e3d04 : 0x394204 (0x165d1c00 0x165d1c34 0x1 0x0)
    0x181e3d34 : 0x3940f5 (0x165d1c00 0x165d1c34 0x1 0x2)
    0x181e3d64 : 0x393c20 (0x165d1c00 0x4694af8 0x1f 0x2)
    0x181e3d94 : 0x393c60 (0x4694af8 0x1f 0x2 0x2b5de18)
    0x181e3db4 : 0x2ed56a5d (0x4694af8 0x1f 0x2 0x198ce5) Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.iokit.IOUSBMassStorageClass(1.4.5)@0x2ed54000
    dependency: com.apple.iokit.IOUSBFamily(2.5.6)@0x518000
    dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(1.4.9)@0x606000
    dependency: com.apple.iokit.IOStorageFamily(1.5)@0x4fd000
    Kernel version:
    Darwin Kernel Version 8.7.1: Wed Jun 7 16:19:56 PDT 2006; root:xnu-792.9.72.obj~2/RELEASE_I386
    Thanks to your idea to look in the console I noticed that somethings in the console.log referenced VersionCue CS2 and I have had problems with this before so I have uninstalled VersionCue completely. Hopefully that helps but I really dont know anything at all about the console or how to interpret anything in it....the word "kernel" appears frequently in the system.log...
    does this mean anything?
    Thanks for your help
    Pete
    Mac mini 1.66 core duo   Mac OS X (10.4.8)  
    Mac mini 1.66 core duo   Mac OS X (10.4.8)  

  • My mba won't restart.  it freezes up.  i would have to push the on/off button to shut it down and restart up. please help

    my macbook air works fine but i can't restart it. it freezes up and displays the thinking circle.  after i push the on/off button it shuts down fine and restarts fine.  please help

    Ops I replied to myself in error.....
    Tom:
    I performed the steps indicated but this morning when I clicked the mouse and hit the space key and clicked the track pad again as before nothing happens.
    I hold the power button for a few seconds and the screen fills as if the computer was normally awakened but it is locked up.
    Then I have to shut it down with the power button  and then power it up as a reboot.
    Not good...SMC reset didn't work....Throughout the day yesterday I put the computer to sleep and woke it up normally.  It seems to be a overnight problem.
    Am I going to have to shut it down everynight?
    Jim

  • My iPad will not connect to my wifi even though it recognizes it.  I have to shut it down and restart it to get it to work.  Any suggestions?

    It will work one time and the next nothing internet related will load.  I have to actually shut the iPad down and then restart it.  It works then but the next time I have the same problem.  It sees my wifi connection.  It like it won't use it.  What's going on?

    Your mistake was entering your WiFi address. Forget the network, then let the phone find it on its own. Your router should then assign an IP address. It's a good idea to reboot the router before doing this to assure that all services in it are working.

  • Using Win 7 64 bit. Problems w/ Firefox 3.6.6: (1) When I close it, it sometimes closes the window but does not stop operating. Yet, I cannot restart it. Only solution is to use Task Manager to shut it down, then restart it. (2) Will not open certain

    Using Win 7, 64 bit. (1) Firefox fails to stop when I close window; only solution is closing it thru Task Manager. (2) Firefox does not allow me to access certain corollary items such as opening emails I receive in online Groupwise and certain videos at websites, such as demonstrations.
    == I purchased new computer w/ Win 7 64 bit

    '''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s'''.<BR>
    This is not a cure but will make it easier if Firefox locks up.

  • Pages are not loading after using for 20 min so i have to use task maneger to shut it down and restart

    i can download for about 20 min then i try to go to another page by opening a new tab or using a bookmark Firefox totally freeze's up so i have to close down and go into the task mngr and shut down the process for firefox and restart because if i do not do that it will not open back up i am using vista home pro on a 64 bit system please help this very bothersome

    This issue can be caused by an extension or plugin that isn't working properly.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • Firefox 27, XP SP3. On this new version sometimes I open it and there's no bookmarks showing. I have to shut it down and restart it. This is 27.0b1

    In addition to the question above, I've never had a problem with previous versions of FF locking up, but now it locks up a lot. I believe this is a beta? I have FF 26 .exe still in a folder. Should I just go back to that version and will these problems clear up? thanks.

    You can check for problems with the places.sqlite database file in the Firefox profile folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file

  • HT201210 I was doing an update on my iphone and it stopped short of getting it all the way done. Now my phone is stuck with an itunes icon on the screen, and will not allow me to do anything with it. I tried shutting it down and restarting it...same icon

    I tried to update my phone. The update didnt go all the way through, and ended up freezing the screen on my iphone with an itunes icon on it. I tried to reboot phone with no success...the icon stays on there with no other function of the phone available. Anybody know of a fix?

    Put your iphone in dfu mode by doing this. Turn your iphone off. When its off, hold home and power button together for exactly 10 seconds, then release the power button and keep holding home button for another 10 seconds. Then open up itunes on your pc and plug your iphone to your pc. Itunes should recognize your iphone in recovery mode and it will tell you to restore it. Click restore, and your iphone will restore. Remember that, if you do this you will lose everything that was on your iphone. You can restore from backup later on. Hope I helped. If you have any questions or problems with this tutarial, you can contact me personaly on my email [email protected]   . Hope I helped. Cheers

  • MacBookPro 10.7.5 shuts itself down and restarts after around 5 minutes of non use.

    This started after my last security update last week. Is there a setting I need to change? or is this a quirk?
    It's infuriating.

    From the menu bar, select
     ▹ System Preferences... ▹ Security & Privacy ▹ Advanced... ▹ Log out after … minutes of inactivity: Off
    If there's a closed padlock icon in the lower left corner of the preference pane, you may need to click it to unlock the settings. Enter your login password when prompted.

  • Email has been running in background for a long time and I need to shut it down and restart empty.

    With hundreds of thousands of emails and 30+ files the program is updating each and taking days. This eats a lot of resources.
    Is it possible to close and delete the entire program and start fresh?

    Look at https://support.mozilla.org/en-US/kb/using-multiple-profiles and create a new profile; DON'T delete your old one yet. The new profile will be 'empty', so you will need to re-enter your email accounts.
    As an additional or alternate step, you can store your old emails in a separate directory or media and then delete them from your active TB folders. See http://barryduggan.info/exportMail.php

  • Ipod camera function not working unless I shut down and Restart

    Ipod Touch has problem opening the camera function. When I shut it down and restart it it works for a little while but eventually stops

    Have you tried reset?
    Restore?

  • Asking the Bridge Team:  Bridge "working color space" setting when one does not have the Suite?

    Common sense tells me there is really no such thing as a
    "working color space" in Bridge, because
    Bridge is not an image editor, just a browser
    Therefore, this may turn out to be a purely academic question; but that doesn't keep my curiosity from forcing me to ask it anyway. ;)
    Is there a way to set the Bridge
    "color settings" when one does not have the suite?
    The only Adobe program I keep up to date is Photoshop, so I've never had the suite. My version of Photoshop is 11 (CS4) and I run updated
    (not upgraded) versions of Adobe Acrobat 7.x, Illustrator 10.x and InDesign 2.x. Consequently, the Synchronize color settings command is not available to me.
    It seems to me that Bridge is behaving like a proper color-managed browser (e.g. Firefox with color management enabled), in that it displays tagged image files correctly and assumes sRGB for untagged image files. This normally works fine.
    But what if I wanted Bridge to assume my
    Photoshop color working space for untagged images
    so that it behaves the same as Photoshop? I'm just curious, as I deal with a minuscule, practically negligible amount of untagged files.
    My reason for bringing it up now is that I don't recall this being explicitly mentioned in forum replies when users inquire about color settings in Bridge. A recent post regarding Version Cue in the Photoshop Macintosh forum got me thinking about this. Just wanting to make sure that I'm right in my assumption that
    there is really no such thing as a
    "working color space" in Bridge, because Bridge is not an image editor, just a browser.
    Thanks in advance.

    Hi Ramón,
    Thanks for sharing the outcome of your tests. However, I may have found a bug/exception to Bridge's colour management policy!
    It appears that CMYK EPS photoshop files are not colour managed in Adobe Bridge, even if they contain an embedded ICC profile.
    I've tried every combination in the EPS 'Save As' dialogue box, so it doesn't seem to be an issue with file encoding. Also, Bridge doesn't rely on the low-res preview that is held within the EPS itself.
    My guess is that Bridge is previewing the CMYK EPS with a Bridge-generated RGB image, but it's being displayed as monitor RGB (assigned) rather than colour managed (converted to monitor RGB). For most users the difference will be barely perceptible, but the problem became very noticeable when using Bridge to preview Newsprint CMYK images on a wide-gamut monitor (images that should have appeared muted really leapt off the screen!).
    How do I report this to the Colour Police at Adobe?!?

Maybe you are looking for