Firefox Embedded Quicktime Video does not seem to be working

Hi,
I am having trouble with Quicktime Videos that run using the Quicktime plug-in in the Firefox browser. I am not having similar problems with Safari and much of what I have been reading seems to talk about the Flash problem (which is not the same). I am on OSX 10.4.11 (852167), kernel Darwin 8.11.1, Firefox version 2.0.0.9, and Quicktime plug-in version 7.3.
The videos I was trying to play are on the startrek.com site (specifically, http://www.startrek.com/startrek/view/series/TOS/episode/68730.html then click on the "Remastered Episode Preview" link -- it is a JavaScript popup from that point). The result is a pop-up with a white box where the video should be and all of the quicktime controls at the bottom. At first it seemed intermittent (maybe one out of three times the video played). Now, it doesn't seem to work at all (could just be that I cleared the cache and it was picking that up).
I did try it with Safari and this video (and the others, of course -- that is just a test case) always works. I dug through the Apple support forum and the mozilla forum for firefox, but couldn't find anything specific to this problem.
Thank you for your help,
Jim

HI and I am perplexed.
I have the newest update for Quicktime on my Powermac Yosemite, 1gb ram and Flip4Mac installed. I have configured the prefernces for both the system prefs part and the QT prefs but I can not see the video...I can hear the music which this makes the 4th time I have installed it and I finally hear it but no pictures.
I don't know what to do. I have OS 10.3.9, updated QT to the latest version, installed Flip4mac, fixed the prefs and even rebooted to the Panther 10.32 cd and used the Disk Utility to repair all hd's and repair permissions to the OS partition.
As I said I can now hear the vid but no images appear. We are trying to use the vids (.wmv) to show off our members chosen each month but the few of us mac users only get moozik...lol
I have tried .avi, .wmv and .swf, the latter I can see and hear but very choppy. In OS 9 I knew there were several codecs that needed to be installed but I thought they were installed with Panther.
The url of the movie is Stormi's Artist of the Month Video ***may contain some nudity but it is not real people it is 3d art***
Message was edited by: MaryW

Similar Messages

  • "Item Help Subscription" does not seem to be working

    Hi All,
    I am on APEX 4.0.1. and trying to use the feature "Item Help Subscription" which does not seem to be working.
    Here is what I have done.
    -> Created a forms page (page 2) that has an item 'P2_NAME'. Define the "Help Text" for that item.
    -> Created another forms page (page 3) that has an item called 'P3_CUST_NAME'.
    -> In Page Definition for Page 3, Clicked on 'Edit All' icon under 'Items'
    -> Clicked 'Utilities' and selected 'Item Help Subscriptions'
    -> For Item 'P3_CUST_NAME', clicked on the LOV under 'Subscribe To' field and selected 'P2_NAME'
    However when I am clicking on 'Apply Changes' to save the changes, it is not getting saved. The 'Subscribe To' field appears blank even after applying changes.
    What I want to know is - is it a bug or have I missed something ? Is anyone using this feature successfully ?
    Any pointers or help will be highly appreciated.
    Thanks & Regards,
    Ashish Agarwal
    http://www.asagarwal.com

    Hi Ashish,
    I had created Item Help Subscription that you had mentioned.
    But I don't have any problem with this. It creates successfully.
    I am using Application Express 4.0.2.00.06
    Regards,
    Kartik Patel
    http://patelkartik.blogspot.com/
    http://apex.oracle.com/pls/apex/f?p=9904351712:1

  • My photo stream does not seem to be working as before with the new PHOTOS update. some of my devices are not getting the uploads/downloads

    My photo stream does not seem to be working as before with the new PHOTOS update. Some of my devices are not getting the uploads/downloads, anyone have this problem?

    Recommend that you post your question in "Photos".
    Remember, Photos is not a replacement for Aperture.

  • My operating system does not seem to be working

    My operating system does not seem to be working properly.  The system preferences cannot be accessed and itunes won't work either.
    My mac is OS X Version 10.4.11 so is quite old.

    Hello,
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Let us know if that helps or not, or any other problems.

  • TS2634 ipad keyboard does not seem to be working.  I have recharged it ---what else should I do?

    My keyboard attachment to the ipad does not seem to be working.  It has been recharged.  Is there anything else I should be doing?

    When you plug in earphones, or anything in the audio output port, it should be reflected in SYSTEM PREFERENCES>SOUND.  If not, try a PRAM reset.
    http://support.apple.com/kb/HT1895
    Ciao.

  • HT1766 My touch screen does not seem to be working. The slide to unlock will not slide

    My touch screen does not seem to be working. I can not slide to open my phone or slide to turn off.

    You have tried restarting, right? Also, try holding the home and sleep/wake buttons together for at least 10 seconds, until the Apple logo appears. See if that helps. If it doesn't and you think this is a hardware problem, taking it into the Apple Store is your best bet.

  • Embedded Quicktime videos will not fully load!

    I've been attempting to watch an embedded Quicktime video on a website but it will only load for a certain portion and stop loading. Everytime I refresh and try again a different amount will load but never the whole thing.

    Hi,
    According to your description, since both IE and Chrome has same problem, it's not browser problem.
    Have you tried to disable firewall and Symantec temporarilly for test?
    If problem persists, firstly start system with Clean boot. Then using Process Monitor to capture the trace of accessing bing.com.
    Clean boot: http://support.microsoft.com/kb/929135
    You can access to the link below to download Process Monitor:
    https://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
    How to capture a Process Monitor trace:
    http://blogs.msdn.com/b/dswl/archive/2010/01/10/how-to-capture-a-process-monitor-trace.aspx
    Learning Example:
    Using Process Monitor to Troubleshoot and Find Registry Hacks:
    http://www.howtogeek.com/school/sysinternals-pro/lesson5/all/
    Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • %@ page import="..." % does not seem to be working correctly

    Hi,
              I am running Weblogic 6.1 sp1 and I am having a problem with import page
              directive. <%@ page import="my.package.*" %> does not appear to be working
              correctly when I try to reference classes in imported packages (my.package,
              etc.) from the useBean tag.
              The following code works with Resin, but not Weblogic:
              <%@ page import="my.package.*" %>
              <jsp:useBean id="errorBean" class="ErrorBean" scope="request"/>
              If, I take out the page directive, and change the useBean tag to:
              <jsp:useBean id="errorBean" class="my.package.ErrorBean"
              scope="request"/>
              then the page compiles and runs just fine.
              Michael
              

    Here's a snippet from Sun's j2ee tutorial
              (http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/JSPBeans4.html):
              <jsp:useBean id="beanName"
              class="fully_qualified_classname" scope="scope"/>
              But I agree with you, the excerpt you posted seems to include the
              useBean tag, which is misleading.
              Nils
              Michael Hill wrote:
              >
              > I don't think this is the way it is "supposed" to be. Here is an excerpt
              > from the JSP Syntax reference on http://developer.java.sun.com
              > on the page directive:
              >
              > import= "{ package.class | package.* }, ..."
              > A comma-separated list of one or more packages that the JSP file should
              > import. The packages (and their classes) are available to scriptlets,
              > expressions, declarations, and tags within the JSP file. You must place the
              > import attribute before the tag that calls the imported class. If you want
              > to import more than one package, you can specify a comma-separated list
              > after import or you can use import more than once in a JSP file.
              >
              > ---
              >
              > It says the packages are available to tags within the JSP file as long as
              > you place the import before the tag that calls the imported class. In my
              > case, I am placing the import before the <jsp:useBean> tag.
              >
              > Michael
              >
              > "Nils Winkler" <[email protected]> wrote in message
              > news:[email protected]...
              > > I'm pretty sure that you have to specify the fully qualified class name
              > > in the useBean tag. import won't help you here.
              > >
              > > Nils
              > >
              > > Michael Hill wrote:
              > > >
              > > > Hi,
              > > >
              > > > I am running Weblogic 6.1 sp1 and I am having a problem with import page
              > > > directive. <%@ page import="my.package.*" %> does not appear to be
              > working
              > > > correctly when I try to reference classes in imported packages
              > (my.package,
              > > > etc.) from the useBean tag.
              > > >
              > > > The following code works with Resin, but not Weblogic:
              > > >
              > > > <%@ page import="my.package.*" %>
              > > > <jsp:useBean id="errorBean" class="ErrorBean" scope="request"/>
              > > >
              > > > If, I take out the page directive, and change the useBean tag to:
              > > >
              > > > <jsp:useBean id="errorBean" class="my.package.ErrorBean"
              > > > scope="request"/>
              > > >
              > > > then the page compiles and runs just fine.
              > > >
              > > > Michael
              > >
              > > --
              > > ============================
              > > [email protected]
              ============================
              [email protected]
              

  • Automated Backup Does Not Seem to be Working

    I tried to set up an automated backup on an Azure Web App. It's on the Standard Plan. It allowed me to configure it and after I did so I got a notification saying it was set up. And I see now that it has a status of "Created". But it does not seem
    to have moved any further -- and it has been about 15 minutes.
    I did successfully get a manual backup of the site to work last night with the same configuration.
    Any ideas as to what I may be doing wrong?
    Thank you.

    Hi,
    I would request you to check under backup options, scheduled backup is on.
    And also please make sure that the Backup and Restore feature requires an Azure storage account and container that must belong to the same subscription as the web app that you are going to back up.
    Do check this and let us know so that we can investigate further.
    Regards,
    Azam khan

  • Quicktime video does not display?

    I have designed several sites that have Quicktime videos but they do not play. Does Quicktime not work on the iPhone? The videos on Apple were the only ones online that we were able to play.

    iPhone uses HS214 video format. See the technical specification. You need to convert any movie format to this format(m4). There are programs available for that, try vailsoft or something..

  • Quicktime 7 does not seem to work properly on my system

    I have juste tried installing the latest Quicktime version on my system (Asus G71Gx, CPU Intel Core2 Quad Q9000 @2GHz, RAM 6 GB, Windows Vista Ultimate 64 bits with SP2), but it never worked properly:
    + I am unable to view Quicktime content on web sites inside my browser (IE 8), getting various error messages or nothing,
    + when I try running the Picture Viewer, I am getting the following error:
    (from system "application" event log)
    Nom du journal :Application
    Source : Application Error
    Date : 24/12/2009 19:31:41
    ID de l'événement :1000
    Catégorie de la tâche :(100)
    Niveau : Erreur
    Mots clés : Classique
    Utilisateur : N/A
    Ordinateur : Appolon
    Description :
    Application défaillante PictureViewer.exe, version 7.65.17.80, horodatage 0x4afa5f57, module défaillant QuickTime.qts_unloaded, version 0.0.0.0, horodatage 0x4afa620b, code d’exception 0xc0000005, décalage d’erreur 0x631abe79, ID du processus 0x25d84, heure de début de l’application 0x01ca84c70b65cde0.
    XML de l’événement :
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-12-24T18:31:41.000Z" />
    <EventRecordID>5557</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Appolon</Computer>
    <Security />
    </System>
    <EventData>
    <Data>PictureViewer.exe</Data>
    <Data>7.65.17.80</Data>
    <Data>4afa5f57</Data>
    <Data>QuickTime.qts_unloaded</Data>
    <Data>0.0.0.0</Data>
    <Data>4afa620b</Data>
    <Data>c0000005</Data>
    <Data>631abe79</Data>
    <Data>25d84</Data>
    <Data>01ca84c70b65cde0</Data>
    </EventData>
    </Event>
    + when I try running the Player, I am getting the following error:
    (from system "application" event log)
    Nom du journal :Application
    Source : SideBySide
    Date : 24/12/2009 19:32:32
    ID de l'événement :33
    Catégorie de la tâche :Aucun
    Niveau : Erreur
    Mots clés : Classique
    Utilisateur : N/A
    Ordinateur : Appolon
    Description :
    La création du contexte d’activation a échoué pour « C:\Program Files (x86)\QuickTime\QuickTimePlayer.exe ». Assembly dépendant Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b ",type="win32",version="8.0.50727.4053" introuvable. Utilisez sxstrace.exe pour un diagnostic détaillé.
    XML de l’événement :
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="SideBySide" />
    <EventID Qualifiers="49409">33</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-12-24T18:32:32.000Z" />
    <EventRecordID>5559</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Appolon</Computer>
    <Security />
    </System>
    <EventData>
    <Data>Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1 e18e3b",type="win32",version="8.0.50727.4053"</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>C:\Program Files (x86)\QuickTime\QuickTimePlayer.exe</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    </EventData>
    </Event>
    Has anyone encountered similar problems?
    Does anyone have any idea about the next steps to take in order to try resolving this issue?
    In advance, thanks for any help you could provide.
    Regards.
    Christophe
    Message was edited by: chris_massucco

    Among the various errors I got trying to access QuickTime content in my browser, I received the "Failed to initialize" message, which apparently other people encountered... Though, the problem descriptions I have read so far in the corresponding threads do not seem to match my case.
    Has anyone got the same errors I received outside of the browser (see previous message)?

  • Im having trouble restoring my MacBook Pro, "Comand" and R does not seem to be working for me.

    Everytime i try to restore it, it opens normaly to log it with a pop up window saying my start up disc is full. When i log in, my desk top is missing along with my personal wallpaper. Cant seem to do anything when i log in and i really need my comouter for work, someone please help. Just want to restore it.

    1. System Preference > Sound > Output
       "Settings for the selected device"
       Is the pointer for "Balance" set in the middle?
    2. Try to push the headphone a bit more into the port.
    3. Reset PRAM. http://support.apple.com/kb/PH4405
    4. Reset SMC.   http://support.apple.com/kb/HT3964
    5. If any of these steps does not help, contact Apple.
    Best.

  • Open with Application... setting does not seem to be working

    Mac OS X 10.6.6, FF 4.0 (RC1), Microsoft Excel 2011 14.0.2. I needed to download several files with .xls suffix.
    Firefox asked what I wanted to do with the file, I indicated Open with Excel, and retain this setting. I then tried the next download, and the "Open With..." button showed no settings. I check the Preferences>Applications area, and Excel is there as the application of choice, but it does not appear as the "Open With" application in the download dialog box. If I just go ahead and download, the file does not open. If I *do* re-select Excel, then the file downloads and opens properly, but the setting is not retained for the next download, even though the "always do this" box is checked. It's a minor issue.

    Has nobody experienced this issue before?

  • The form filling application does not seem to be working

    The automatic form filling does not appear to be working

    You have or had an extension installed (MegaUpload toolbar) that has changed the user agent from Firefox/3.6.4 to Firefox/2.0.0.4.
    You can see the Firefox version at the top and the user agent at bottom of the "Help > About" window (Mac: Firefox > About Mozilla Firefox).
    You can check the '''general.useragent''' prefs on the '''about:config''' page.
    You can open the ''about:config'' page via the location bar, just like you open a website.
    Filter: '''general.useragent'''
    If ''general.useragent'' prefs are bold (user set) then you can right-click that pref and choose ''Reset''.
    See [[Web sites or add-ons incorrectly report incompatible browser]] and [[Finding your Firefox version]]
    See also http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
    To see all the History and Cookie options, select: Firefox > Preferences > Privacy > History: Firefox will: "Use custom settings for history" - See [[Options window - Privacy panel]]
    Firefox > Preferences > Privacy > History: "Remember search and form history"
    See also [[Form autocomplete]]

  • I tried to upgrade by browser as requested by Firefox but the upgrade does not seem to take, as I am asked to do this upgrade over and over.

    For the past week, I get a request every day to upgrade my Firefox browser. I try to comply with this, but the next day I get the same request.

    Because the policy changed earlier this year. However, you either got a rep who really wants an upgrade commission OR you went to a 3rd party reseller and they do not have the options to keep you on your same plan.
    So questions:
    What plan do you have? Full description from bill would be great.
    What plan did they say you have to choose? (Share Everything?)
    Does your son currently have unlimited data (That would have to go if getting a subsidized phone. No way around that unless ya pay full price)
    What was the address of the store you went to?
    Have you tried upgrading online to see if a change is required? (If you are required online, then it must occur for you to get what you want)

Maybe you are looking for