Firefox "hangs" when opened and will not load first page

I am running Firefox on Mac OS X and when I open it it hangs and does not load the first page. The whole application does not respond so I can't open it in safe mode or anything. I have to keep force quitting it.

So no help from any one about this?

Similar Messages

  • Firefox crashes when opening and will not open in safe mode

    Recently FF3 started crashing when opening. It will not open in safe mode as well. I have uninstalled it including deleting the install folder and profile folders as well as registry entries. Upon reinstallation is will still not launch in any mode.
    I have scanned for malware with several scanners and that has not found anything.
    Here is the crash report cause - nsCOMPtr_base::~nsCOMPtr_base() | nsDocShell::SetupNewViewer(nsIContentViewer*)
    Anti-virus is Trend Micro Worry Free for Business. I uninstalled it and Firefox and then reinstalled only Firefox and still get the same thing.
    I do not know what to try next.

    Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.3
    BuildID: 20100401064631
    CrashTime: 1274739594
    EMCheckCompatibility: true
    Email: [email protected]
    FramePoisonBase: 00000000f0dea000
    FramePoisonSize: 4096
    InstallTime: 1274097386
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 525200
    StartupTime: 1274739562
    Theme: classic/1.0
    Throttleable: 1
    URL: http://en-us.start3.mozilla.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official
    Vendor: Mozilla
    Version: 3.6.3
    This report also contains technical information about the state of the application when it crashed.

  • Safari opens but will not load the page after I erased my hard drive and reinstalled yosemite. Anyone have a solution? I have to restart for safari to open and load.

    Hi everyone.
    I recently erased and reinstalled Yosemite on my iMac 27 (model late 2013). After I reinstalled everything i've noticed that when it goes to sleep/nap and when I come back to it and open the browser (safari) it will not load. I have to restart the whole iMac for it to work. I've erased and reinstalled again and I still have the same issues. Can anybody help?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Why does firefox hang when opening and takes several minutes to come up?

    Why does Firefox hang for several minutes before coming up?

    I am also having this problem. When trying to reboot, I get an endless cycle of the BIOS screen, then "MACHINE ERROR", then back. Running the same dmesg command as snoxu results in a similar error message. I am forced to shutdown by holding the power button. Upon rebooting, I get an error message that all extensions have been turned off (using Gnome Shell). Then I have to logout and login.
    Shutting down and then restarting works fine.
    Additional info:
    System76 Gazelle Professional laptop
    syslinux, systemd, GDM, Gnome Shell

  • Firefox crashes on opening and will not open in safe mode either

    firefox crashes as soon as window appears and same in 'safe mode' mac osx 6.2.4
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.3
    BuildID: 20100401064631
    CrashTime: 1274739594
    EMCheckCompatibility: true
    Email: [email protected]
    FramePoisonBase: 00000000f0dea000
    FramePoisonSize: 4096
    InstallTime: 1274097386
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 525200
    StartupTime: 1274739562
    Theme: classic/1.0
    Throttleable: 1
    URL: http://en-us.start3.mozilla.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official
    Vendor: Mozilla
    Version: 3.6.3
    This report also contains technical information about the state of the application when it crashed.

  • Ever since I downloaded the new Firefox, when I right-click on a link to open it in a different tab, the tab will open but will not load anything, no matter what link I try.

    Ever since I downloaded the new Firefox, when I right-click on a link to open it in a different tab, the tab will open but will not load anything, no matter what link I try. The tab will show the website destination in the navigation bar, but will not automatically load it; I have to press the load button in the navigation bar instead of it instantly loading.
    == This happened ==
    Every time Firefox opened
    == The newest version, 3.6.6, of Firefox was downloaded

    It's not specific sites. I can middle-click on the same link 50 times and it will open it in a new tab 45 times and 5 of those times, it will randomly open it in an entirely new window. I don't know what's causing this.
    It happens so randomly that I don't know how to pin-point what it could be.

  • I can not open firefox when I leave the program is tells me that firefox is still running and will not open

    #
    I can not open firefox when I leave the program is tells me that firefox is still running and will not open
    # Details
    BoldItalicInsert a link...

    Because Firefox sucks that way. I have the same problem. Royal pain in the @$$. I have to use the task manager to duck out of it, or you have to w8 & count to 10...lol. Stupid program.

  • Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server.

    Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server. I have to click the link several time before it will load and sometimes when they do load it does not show the page right. It is like the HTML is messed up or something. I have tried everything I can think of. I started in safe mode, still did it., I removed add-ons, still did it., I reset Firefox and still did it., I completely uninstalled Firefox and re-installed Firefox and it still does it. I have tried Malware Bytes Anti-Malware scans and Avast boot-time scans and found no malware or viruses. I have found that those websites open the first time with no problems on my IE9 and they used to do so in Firefox 26.0. I'm at my wit's end. The website links are in my bookmarks and are used all the time so they are trusted and my avast is set to allow them. They range from news websites to gun websites and everything I have read says that Mozilla does not filter those unless something has changed recently.

    Try this as a first step;<BR><BR>
    Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''<BR><BR>
    and<BR><BR>
    Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"'''''<BR><BR>
    If there is still a problem,
    '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
    While you are in safe mode;
    '''''Firefox Options > Advanced > General'''''. Look for and turn off '''Use Hardware Acceleration'''.

  • Firefow will not open at all on one computer and on the other it opens but will not load. I just added a new wireless router, could this have anything to do with it, it had been working fine up until I installed it Tuesday night. Internet explorer won't

    I installed a new wireless router on Tues. (May4) up until that time I had no problems using Firefox. Now I cannot get it to open on one computer, and the other it will open but will not load. Wondering if it has anything to do with the router, my provider or our computers. Again, it had been working fine. I am also unable to open interent explorer now on either computer.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; AOL 9.0; Windows NT 5.1; GTB6.4; AskTB5.6)

    Sounds like a problem with the router installation/configuration (likely) or a DOA router (very unlikely).
    Visit the forums for the router manufacturer (i.e., linksys, d-link, etc.) and ask for assistance there. There is probably a link to help listed in the router manual.

  • I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

    I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
    I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
    help?

    command-option-esc keys and force quit Mail. Then relaunch.

  • Whenever i open my macbook the rainbow spinning wheel continues to spin and will not load PLEASE HELP

    whenever i open my macbook the rainbow spinning wheel continues to spin and will not load PLEASE HELP

    Which os version are you using? 
    Please describe in detail all you have attempted to do in order to resolve the issue. 
    Troubleshoot the spinning beach ball 

  • CR files will no longer show in bridge and will not load into PS

    Hi I had a problem with bridge CS6 dynamic link failing and had tech support finally help with the problem by phone They had me reinstall PSCS6 and Bridge among other things like setting the permissions differenty. It worked ok when I opened it again after those changes and then I closed the apps and opened them again the next day (today) but now the CR files will show no thumbnails nor previews in bridge and will not load into PSCS6.
    I get now the following error messages
    These are files that are on my system and not from a camera plugged into the computer. They had worked just fine before the reinstall and permisisons changes the tech had me do. They open in the preview app and look fine so I know they are not corrupted files and I have tried different saved versions of the same (or any other CR file) and none of them will now open and Camera raw itself seems no where to be found. My prefences in camera raw have not clanged. Any ideas??? thanks and aloha, UP
    I tried image processor in bridge to make them PS files and got the following error message.
    I tried to load one of the CR files from the finder dirretly and got the following error message.
    Any help would be appreciated. If the post goes inanswered I will call tech support  again. aloha UP

    HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

  • Hallelujah, finally disabled OOPP. I use Firefox 9.0.1 and will not upgrade to anything that ignores my settings. Been looking for this info for years!

    As soon as Firefox came out with OOPP, I immediately asked how to permanently disable it and had a Firefox developer straight-up lie to me and say it couldn't be done without downgrading. Thank GOODNESS for the instructions on https://support.mozilla.org/en-US/questions/713600?page=1 Finally, finally I have excised the hated OOPP!
    I run Firefox 9.0.1 and will not upgrade, ever, unless I see signs that Mozilla has radically altered its development direction and discarded most of the boneheaded, broken, anti-user development that has gone into versions more recent than Firefox 1.x. Actually making your mission statement more than an empty promise might be a good place to start.
    Let's see...anything else? Oh yeah, any developer who advocates overriding or ignoring user settings, or taking control away from the user, should be kicked off the team. (and investigated as a possible Government mole, but that's a lot to ask for). I hear Konqueror and Safari are looking for new devs. It gets old fast when you try to get support and instead get haughty "You're doing it wrong, stop doing that" responses. I'm doing exactly what I intend to be doing and if you can't support that, someone else will. If you really gave a damn about your users, you might start by backporting security fixes to previous versions instead of spewing out a cacophony of incompatible new versions so rapidly you end up confusing and alienating users and making them switch updates off entirely. I mean seriously, what happens when Firefox hits triple digits? You could stick a decimal in front of it, and name that build after a historic baseball player who had that batting average. But even then you will run out of players in a few months.
    It's truly sad. I switched to Firefox because it was the best browser. But Firefox has been backsliding horribly since around 2.0, and the other browsers seem to be in about the same boat. Firefox IS still the best browser - but only if you use an ancient, unsupported version. That's a big problem.

    Using an obsolete version released [http://www.mozilla.org/firefox/9.0.1/releasenotes/ December 11th 2011] is the exact definition of downgrading. It exposes your system to all the security vulnerabilities that have been fixed since then.
    * https://www.mozilla.org/security/known-vulnerabilities/firefox.html
    Out-of-process plug-ins was made mandatory on Windows Vista and later because Adobe don't test Flash Player's protected mode with OOPP disabled. This change didn't happen until Firefox 14, so there was no need to go as far back as Firefox 9.0.1.
    If you absolutely have to, you can disable OOPP by creating the ''MOZ_DISABLE_OOP_PLUGINS'' environment variable and setting its value to '''1'''. Firefox must be restarted for the change to take effect. This works in the current version of Firefox, so there's no need to use obsolete insecure versions.<br>
    If you don't know how to create an environment variable, see the following article for instructions (the "Using the Custom Environment Variable" section is not relevant).
    * [http://www.howtogeek.com/51807/how-to-create-and-use-global-system-environment-variables/ How to Use Global System Environment Variables | How-To Geek]

  • My mail will not open and will not let me quit it. Help?

    My mail will not open and will not let me quit it. Ive tried to restart my computer but it wont let me do that because it says the Mail has canceled the restart. It does the same thing when I try to shut it down. Can someone help?

    Welcome to Apple Support Communities
    Press Alt, Command and Esc keys, select Mail and force close it. Finally, restart or turn off your computer

  • My browser will not load a page or update unless I am actively moving my cursor or typing. If I select a page and don't do anything then it doesn't load at all. I have no idea how this happened or how to fix it. Thanks.

    My browser will not load a page or update unless I am actively moving my cursor or typing. If I select a page and don't do anything then it doesn't load at all. I have no idea how this happened or how to fix it. Thanks.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • BI IP Executing planning sequence via process chain not possible

    Hi, we use BI IP and have defined a process chain (RSPC) with value type process planning sequence. When we execute it, we get error message "Inconsistent input parameter (parameter: <unknown>, value <unknown>)" When we execute this planning sequence

  • Deleted Contacts show up when trying to send a Text Message.

    I have deleted contacts that still show when I try to send text messages out.Their name still appears even when they are deleted in my contacts. I've tried countless methods but nothing works. It won't go away. It's a huge problem for me and a lot of

  • Date arithmetic

    has anyone used this code before: SELECT {fn TIMESTAMPDIFF (SQL_TSI_DAY, {fn CURDATE()}, '1998-12-09')} FROM DUAL; i'm getting invalid character when i run it from sqlplus. do i need to run a package to recognize the function or did i miss something.

  • Regarding closing the cursor

    Hi, I've one doubt. If we've opened any cursor in pl/sql session, & did not close it during code run, is there any chance that the cursor will remain open? My problem here is as below: We're calling a pl/sql package through a java based application,

  • Can anyone guide me in Validation Frame Work of Struts

    Hi Guys , can anyone guide me on Validation Framework, Template Framework & tiles.I.e some of the best resources which can guide me there, As I am new to STRUTS Frame work.Better dont insist on google etc engines.Just let me know the best of the best