Firefox Not Working on Some Websites (Ex: Hotmail, GMX, WoWhead)

Whenever I log into Hotmail, I am unable to open any of my e-mails. When I go to GMX, the page just loads indefinitely. When I search for something on WoWHead, I can't see anything under the "Contribution" or "Related" fields.
It appears that some sort of plug-in is not working correctly, I am assuming JavaScript. I completely uninstalled both firefox and Java, then reinstalled them. It did not correct the problem. I am also having these problems with IE.

When I reinstalled, I tried it without AddOns. I've also ran Firefox in safemode, along with Internet Explorer. It still didn't work.
Hotmail and GMX Mail work with Internet Explorer, except for that I am experiencing the same problems with both Firefox and IE.

Similar Messages

  • Why do the "SHOW THE PREVIOUS PAGE arrows not work on some websites such as when I try to return to the previous page the arrows at the top right of the page are not dark black they are light grey and do nothing---HELPPPP

    why do the "SHOW THE PREVIOUS PAGE arrows not work on some websites such when I try yto return to a previous page the arrows at the top right of the page do not work instead they are light grey instead black and do nothing---this is frustrating to not be able to return to the page before--HELP

    If a page you go to opens in a new tab, there is no 'back' to go to. If that is the case, just close the tab and you'll be at the page you came from.

  • Safari does not work with some websites

    Allthough Safari works fine with most websites, I recently discovered that with a few it does not work properly.
    With one: http://prive.eneco.nl/ the webside does not recognise my user IDE
    With the other:http://prive.eneco.nl/ it does not load the page after a selection is made
    In both cases Mozilla works fine.
    Is there any body who could advise a solution?
    Thanks

    You can get Firefox 3.6.16 here: <br />
    http://www.mozilla.com/en-US/firefox/all-older.html

  • Adobe Flash Player (AFP) not working on some websites. Help please?

    I am trying to view some websites, but the area turns gray where the interactivity is (where Flash Player is needed). I uninstalled everything related to AFP, then went to the sites so they could direct me to install. I installed (I hope) the most recent version of Flash, went back to the sites with no luck. Can someone please help me? Your assistance is appreciated. Thank you.

    Flash Player Help | Installation problems | Mac OS
    Flash Player Help | Installation problems | Flash Player | Windows
    Mylenium

  • Keypad on keyboard not working with some websites.

    After upgrading to windows 7 I have certain internal and external websites that will not allow the numbers on side of keyboard to work.  I found some .net 4 security updates that were blocking those number keys.  After removing updates the problem
    went away for a short time on one computer.  The other computer I had to remove .net 4 completely before I could use the numbers on the side.  Both computers after seeing them work stopped working again without the security updates being reaplied. 
    The .net security updates that I removed from Microsoft said this, "This update resolves vulnerabilities that could allow elevation of privilege if a user goes to a specially crafted website or a website that contains specially crafted web content."
    If I remote into the computer using vnc everything works fine.  I just cannot use the side numbers keys when sitting at the local pc.
    Any ideas that may help with this would be great.

    Hi,
    To test this issue in Clean Boot mode would eliminate the software conflicts.
    If this issue persists, try this way to test:
    Type without using the keyboard (On-Screen Keyboard)
    http://windows.microsoft.com/en-in/windows/type-without-keyboard#type-without-keyboard=windows-7
    if this issue does not occur in this situation, we can reinstall the Keyboard driver.
    If you have any feedback on our support, please click
    here
    Alex Zhao
    TechNet Community Support

  • QT not working with some websites

    My mom is having problems looking at BBCAmerica.com. The opening page is set up by quick time. But on here macbook she gets the QT logo with a question mark. What is causing this. I ran disk utility on here macbook and installed Perian plug in as well. I cant think of any thing else though. The site works fine on my other two macs, But i cant think if I have something installed that she doesn't. Any advice? Thanks.

    QT with a ? usually refers to Flash video.
    She may have to tweak a few settings:
    These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
    Assuming you already run OS 10.4.9 or above and have Quicktime 7.2, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
    RealPlayer from http://uk.real.com/player/
    Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
    Perian from http://perian.org/
    Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
    In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
    In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
    Important: Now repair permissions and restart.
    The world should now be your oyster!
    You should also have the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

  • Mac 10.5.8-Flash Player 10.3.183.90-Firefox 3.6.22-can not see properly some websites, videos or TV

    Mac osx 10.5.8 - Flash Player 10.3.183.90 - Firefox 3.6.22 - can not see properly some websites, videos or live TV-
    I get a message that says do you want to install Flash Player 11.8? I click "yes" and not installed, I think it's because that version is not compatible with my operating system Mac OSX 10.5.8.
    I'm going to flash website and only let me unburden the version that I have Flash Player 10.3.183.90, downloaded previous versions of flash but not running on my computer.
    Can you help me please, what I can do? greetings and thanks!
    En Español:
    Mac osx 10.5.8 - Flash Player 10.3.183.90 - Firefox 3.6.22 – no se pueden ver correctamente algunas webs, vídeos o televisión en directo-
    Me aparece un mensaje que dice ¿desea instalar Flash Player 11.8? hago clic en “si” y no se instala, creo que es por que esa versión no es compatible con mi sistema operativo Mac osx 10.5.8.
    Me voy a la web de flash y sólo me deja descargarme la versión que tengo Flash Player 10.3.183.90, descargo versiones anteriores de flash pero no se ejecutan en mi equipo.
    Me podrían ayudar por favor, ¿qué puedo hacer? un saludo y gracias!

    Probably not! Be patient!

  • Firefox browser not working on Apple websites

    My Firefox browser was having perpetual problems properly loading any apple.com site and I have a sure fix for the problem if anybody else is experiencing the same problems.

    So what's the fix for Firefox not working on Apple's website? Could it be that Apple is becoming the New Microsoft? I'm guessing that has something to do with it.

  • Why does firefox 4 hang in some websites, during browsing on that site ? This never happened with previous editions.

    why does firefox 4 hang in some websites, during browsing on that site ? This never happened with previous editions. edit
    Details

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    Create a new profile as a test to check if your current profile is causing the problems.<br />
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]<br />
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"<br />
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?

    Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?

    Hi Aish
    I wanted to check the following, but the URL is not found, you have another one?
    thanks
    Nicole
        4. Visit http://my-site.com/scripts/form_check.php in a web browser and make sure you see all green checkmarks. If some items do not display green checkmarks that means that the hosting server is not configured correctly to allow the Form widgets to send email messages to the address you've specified.
                    Contact your web-hosting provider about the server configuration problem. Describe the items that are not marked as green in the form check page, so that they can help you set up the servers to use the correct settings.
    Il giorno 9-set-2014, alle ore 16:11, Aishvarya Raj Rastogi <[email protected]> ha scritto:
    Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?
    created by Aishvarya Raj Rastogi in Help with using Adobe Muse CC - View the full discussion
    Hi Nicole,
    What is the "From" email address in your form?
    Also, have you checked the spam folder?
    Please check the following posts as well :
    https://forums.adobe.com/docs/DOC-3581
    Re: PHP mail may be disabled or incorrectly configured on the web server.
    Regards,
    Aish
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6714281#6714281
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Updated to Flash 10 for OSX10.4 but it doesn't work on some websites

    I'm using Firefox but it happens in Safari as well. Some websites are OK. But others with flash appear blank or on myspace the music says i need to update my flash player. I have the newest flash player. I went to the check if flash installed correctly and i see the animation and all is fine. But some websites with flash don't seem to work.
    Is there an easy fix somehow? Why do some work and others left blank?

    there must be a solution. come on guys... i uninstalled using the adobe uninstaller and reinstalled but still no good. works for some websites, doesn't work for others

  • Print function is not working with certain websites, specifically PNC bank

    When trying to print on specific websites, all that is printed is a blank page, no content. This specifically happens on PNC website, but has occurred on others as well.

    Hi vermontgolfer,
    I am sorry to hear that the printing is not working for this website. If you go to about:permissions and look for the website name you can check to see if there are any saved preferences that may be causing this.
    Since they are printing blank pages, please make sure that you have updated to version 29.0.1 as this was a bug in pdf.js that was fixed with this update. If you are not using pdf.js you can reset the printing settings with these references: [[Fix printing problems in Firefox]]

  • Scroll to top in Safari is not working on certain website

    Hi,
    I know that tapping the top status bar bring me to the top of the page on safari, however it seems that on some website I usually visit, the scroll to top function is not working.  The websites that I had this problem are : any wikipedia pages, any wikia pages, some wordpress blogs.
    Are there anything that exist on those websites preventing me from using the scroll top function?

    Thats most likely because the web page is made fr desk top computers and is not for mobile devices. Currently there is nothing you can do about it.

  • Outlook autodiscover is not working for some users in coexistence

    Hi
    We are doing exchnage 2013/2010 coexistence
    Most everything is ok BUT outlook autodiscover is not working for some exchange 2010 users now that 2013 is in the front!!!.  We end up creating the profiles manually.  It has affected some but not all the users.
    I followed the instructions here but it didn't help.
    http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
    Using outlook 2010, 2013, patches, .... didn't make a difference
    Would you please help?
    Thank you

    Hi 
    If it is affecting only few handful of users i could suspect a mailbox corruption and would recommend to move mailbox and see the results.
    Also you can try below
    You need to set the values MaxFieldLength, MaxRequestBytes & MaxTokenSize to below on Exchange 2010 CAS servers as well as Exchange 2013 CAS servers
    Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
    Name: MaxFieldLength
    Type: DWORD
    Value: 65534
    Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
    Name: MaxRequestBytes
    Type: DWORD
    Value: 16777216
    Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters
    Name: MaxTokenSize
    Type: REG_DWORD
    Value: 48000 
    Just reboot the servers once its done and you will be good to go.
     References
    https://social.technet.microsoft.com/Forums/en-US/cc2929ac-4d36-4e84-a567-ce9b3bec1398/http-400-bad-request-on-iis-8-exchange-2013-cu2-on-windows-server-2012-autodiscovery-is-not?forum=exchangesvrgeneral
    http://blogs.technet.com/b/kristinw/archive/2013/03/28/recommended-changes-and-enhancements-to-support-exchange-in-an-enterprise-environment-whew.aspx
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • MAM application is not working for some users

    Hi All,
    Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
    If I use different user on the same device I can see the MAM application and MAM data.
    What could be the wrong in this case. Any help would be highly appreciated.
    Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
    Middleware:SAP NetWeaver 2004s with Patch leve 15
    Backend:SAP ECC 6.0
    Application:MAM 3.0
    Thanks and Regards,
    Ameer.

    Hi,
    from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
    For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
    You need to solve this before you can go any further.
    Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
    Regards,
    Larissa Limarova

Maybe you are looking for

  • Help -- Email no longer appears in Gmail inbox

    As of yesterday, messages no longer appear in my Gmail inbox on my HTC Incredible 2.  I can access new messages at gmail.com and using outlook on my home PC.  When I send myself a message, the phone buzzes and says I have new mail, but nothing appear

  • Purchase Requisition Notification Error

    Hello all, I have created Purchase Requisition in R12.1.3. While approve that requisition I got below error in Notification. Unable to reserve Purchase Requisition 1 Please guide me to resolve this issue. Thanks and Regards, Muthu

  • When to use MDM

    Hi! All, 1.I am in  a doubt when to use MDM? If I am having R/3 at all my centres, Do I still need MDM? 2.Is MDM only meant for integrating different ERP Packages?

  • Hotspot is stuck on

    I have an iphone 6 and iPhone 6 plus both with iOS 8.1.1.  They both show up as having personal hotspots even though the personal hotspot settings on both show up as OFF.   I have tried turning the hotspot on then off. I have also tried resetting the

  • To find whether a date is b/n a date range.

    Hi All,          I want to find  whether the system date  falls between from_date and to_date fields of a table.  Pls help me. Thank you, praveena