Firewall/VPN Model-SG300 Cyberguard after configuration internet working very slow....please help me...
HI FRIENDS,
i have one firewall model number sg300 i configured each and everything
but after configuration internet working very slow.if i want to open any website it is taking 5 min .i connected
my lease ling directly in this device.
please help me....
Thanks,
Madhukar
Hi Madhukar,
It seems that it is not a hyper-v issue .
For troubleshooting this please use your computer to access internet directly (without firewall ).
If it works well , you may go over the configuration of the firewall .
Also you can contact the hardware vendor .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Recently my imac has been running unusually slow when I open/close apps or when loading things, it sometimes would freeze or take about 20 secs to load etc.
So in an attempt to fix it it cleared all unnecessary files from my computer but nothing too technical.
Then yesterday i was told by my brother to go onto disk utilities and verify/repair the disk. Both times it failed and further repeats failed. After the repair disk failed a message along the lines of "back up data you want then restore the disk" something like that.
Now today when I started up my computer in the morning it was fine, then a couple of hours ago I restarted it, and now it won't turn on properly. It goes to the apple icon with a spinning loading wheel and a empty bar underneath and after about 20 secs it shuts down. So then I did the thing where you hold down cmd and r to open osx utilities and went to disk utilities again to try and repair/verify the disk and again the same failure and messages came up suggesting to restore my disk.
Being 16 I only understand so much and understand that I will probably have to put in the installation disk or something and "re do my computer from scratch." But I do have things I want to back up before I do so but due to the load up problem I have no way of backing up photos, music and files and i don't know if the time machine has backed up the data for me (I don't really understand the time machine). I'm currently using my phone to post this, any help would be greatly appreciated because I don't really know what else to do now. My imac is 21.5 inch that I bought around 2years ago late december time. Thank you for your timeSounds like a classic HD failure. Take the machine to your local Apple Store or AASP, if it is still covered by AppleCare they will handle it at no charge. If you have been backing up then once the machine comes back restore from backup. I get you are only 16, so I'd explain to your parents the computer needs to be taken in for service, if they bought it for you they would know if it is covered by AppleCare or not, assuming they originally bought the computer for you.
Good luck. -
after installing mountain lion I lost pictures in iphoto, lost my musisc in itunes, my icluod is not working, internet its very slow and some other issues. There is a way how to fix these issues
Open System Preferences > iCloud
Deselect the box next to Photo Stream then reselect it.
Now for your music. Launch iTunes. From the iTunes menu bar top of your screen click iTunes > Preferences then select the Store tab.
Select: Music. (and Apps and Books) if you want.
Click OK.
iCloud syncs via your Wi-Fi network so give it a minute or two to reset your photos and music.
Slow internet ... try turning off the modem for a few minutes, then turn it back on. -
I installed viber on my iPhone 5s. After entering my number, it says:"
No Service
It seems to be a problem connecting to viber's service.please check your connection and try again"
Nevertheless I have connected to the internet.
Could you please help me?Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM) -
Internet performance very slow using DM-VPN
Internet Speed very slow , when Tunnel establish by DM-VPN.
HUB to Spoke and Spoke to Spoke Internet very slow. also local internet very slow.
for contact: [email protected]
+966-542239758
Posted by WebUser Shahzad Khan from Cisco Support Community AppYou have posted your question in a Contact Center support forum. You may have better success over in the Security forums found here:
https://supportforums.cisco.com/community/netpro/security
Good luck and happy securitying!
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches. -
How to run a cable internet on 877W router, please help.
Hello everyone!
I have made many variants of IOS configuration but nothing seem to work yet and finally I need someone to tell me if this is possible at all.
I was using 877W when I was registered to my ISP as a DSL user, everything was perfect. Now I'm using a cable internet and I just can't believe this device can't handle it. I'm trying to get it done for months with one result - network loop (I guess). Don't want to give up.
Situation is as following:
Because 877W doesn't have a routable port, I'm using a VLAN and a Bridge interface to assign an IP address from ISP.
ISP -> FE0 switchport -> VLAN 1 - BVI 1 (BVI with mac address set so ISP will give it IP from their DHCP)
interface FastEthernet0
interface Vlan1
no ip address
no ip redirects
ip virtual-reassembly
no autostate
bridge-group 1
interface BVI1
mac-address ####.####.####
ip address dhcp
ip nat outside
ip virtual-reassembly
By this configuration, internet works for for a while, then it drops and I have to restart BVI 1 interface to bring internet back again.
If I add this command in main config:
no spanning-tree vlan 1
Internet will never drop but it will became very slow, from say 35Mbps to 1-5mbps.
I think that I need somehow to force my ISP switch to "think" that my FE0 switchport is not a switchport but a single host.
Guys, I need your help!http://download.oracle.com/otn_hosted_doc/forms/forms/A73071_01.pdf
Good luck...
Sim -
Question
Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!! -
my i pod touch is in recovery mode and it keeps saying i cant restore because my internet setting are incorrect please help.
Try disabling the computer's antivirus and firewall during the download and restore. If still problem come back with the exact wording of the error message.
-
Keyboard is working very slow while on internet
My laptop model is G 62 the keyboard is very slow while working in the internet
Hi,
Firstly, it is not recommended to configure a DNS Server on the External Interface of the ISA Server.
I suspect this issue may cause by some worm/virus infected computers from your internal network. Please run antivirus software on both ISA Server and internal clients.
Besides, I recommend you to check in task manager or performance monitor to see if there are Heavy disk load and resource consumption, high CPU load, high memory usage and high network bandwidth consumption issues.
You can also enable logging of traffic blocked by flood mitigation:
In the console tree of ISA Server Management, click General. In the details pane, click Configure Flood Mitigation Settings. On the Flood Mitigation tab, select Log traffic blocked by flood mitigation settings.
More information:
Overview of flood mitigation
http://technet.microsoft.com/en-au/library/cc995196.aspx
Best regards,
Susie -
I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!
I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!
-
I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?
Vere Clarke
Premiere Elements 9.0/9.0.1 and Premiere Elements 13 are standalone products.
So, you can have both on the same computer, but only open one for your work.
The classical recommendation is to finish a project in the version in which it was created since there
is no guarantee that a project from an earlier version will open in the later version. Probably will, but
no guarantees. And, when you do explore this, do it from a copy of the earlier version project. Once you
take the earlier version project into a later version one, you cannot go back to edit the later version edited
project in the earlier version program.
If you have both versions (9 and 13) on the same computer and you have not moved, deleted, renamed any of the version 9's files/folders,
right click the saved closed Premiere Elements 9.0/9.0.1 project file, select Open With, and then Adobe Premiere Elements 13.
(Your 9.0/9.0.1 saved closed project file should be found in Libraries/Documents/Adobe/Premiere Elements/9.0.)
Please review and consider. If any questions or need clarification, please do not hesitate to let me know.
Thank you.
ATR -
InDesign CS5 is not opening after deactivation/activation. How can I fix this? Illustrator and Photoshop open and are working fine. Please help!
First of all, thank you for replying so promptly to my posts this morning!
I can't remember how I got the software on his computer, but I'm pretty sure it wasn't through migration assistant.
I was looking into doing an uninstall of InDesign and a fresh install. However, I initially downloaded the CS5 suite digitally and I can't find out how I am able to perform a fresh install of InDesign. Do you know where I find this info or gain access to download just InDesign again? I can't seem to find anything in my Adobe account that shows where I might do another download. -
My Bluetooth has disappeared and I have tried just about everything on the internet. When I click on Bluetooth file exchange it says hardware not found. I tried resetting everything as well nothing is working for me please help because now my facetime doesn’t work neither does photo booth and now I cannot text people off my laptop unless they have iMessage.
If you followed the instructions in the support article exactly (leaving the machine off for two minutes), then it has a hardware fault. Take it to an Apple Store or other authorized service provider for repair.
-
Internet is very slow but says i have a good connection ?
My internet is very slow but yet i have a good connection please help
Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If the answer is no, do that now and see whether there's any change.
Are any other web browsers installed, and are they the same?
What about other Internet applications, such as iTunes and the App Store?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference? -
hi,my name is kutan.since i updated ios7 on my ipad;internet got very slow,i can not open facetime no more,i can not download or update anything from apple store! so this is just redicilous! please any help?
It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398
Maybe you are looking for
-
How do i downgrade itunes 10.4 to itunes 10.3 in windows vista
How do I downgrade itunes 10.4 to 10.3
-
Problems with Java AQ interface migrating 9i to 10g
Hi! I've got problems with Java AQ Interface migrating from 9i DB, JDBC, AQ to 10g rel.2 DB, JDBC, AQ First, i started to occasionally receive NullPointerException in Oracle JDBC 9.2.0.8 java.lang.NullPointerException at oracle.jdbc.driver.OracleStat
-
Do not save form when the filed is not completed correctly
Hi i was create a form and publish in the Document library. i was create a Repeating Table with two filed(Combo box and text box) and set Action Rule from that filed.This means that the user can not selected same value. when publish it and full this
-
Creating auto-increment field in SharePoint List
In SharePoint, we can create the auto-incremental field by many ways, I am going to discuss two ways of doing it. Calculated field Item Event Receiver 1. Using Calculated field: Using this we can accomplish it without doing any programing and it is a
-
Creating a simple url link in WebDynpro
Hello, I would like to create a simple link in web dynpro. meaning that a text i will have will be linked to an address in my computer, for example: "My Documents" will link to c:\douments and settings\my documents\ I tried to use LinkToUrl but it se