Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed latest version of Tuxera NTFS for Mac.

I purchased a 3TB HDD (WD USB 3.0 $100) to replace the 2TB Seagate for a new Time Machine HDD. The 2B was full and backups were deleting older files. The 3TB was formatted NTFS and I want to "recover" the included SW before I reformatted the HDD for the iMac. I discovered that MacFuse was out of date and unsupported and my NTFS-32 was also out of date so I uninstalled both and then installed the most recent version of Tuxera NTFS for Mac. I rebooted and discovered that the FW800 port was unresponsive. Below is the EtreCheck report:
Problem description:
Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed Tuxera NTFS for Mac.
EtreCheck version: 2.0.8 (95)
Report generated October 30, 2014 7:11:17 PM EDT
Hardware Information: ℹ️
iMac (24-inch Mid 2007) (Verified)
iMac - model: iMac7,1
1 2.8 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI,RadeonHD2600 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 0:17:34
Disk Information: ℹ️
WDC WD5000AAKS-40TMA0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
ML 10.8 (disk0s2) / [Startup]: 499.25 GB (20.92 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Logitech USB Receiver
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Hardware Monitor ƒ/HardwareMonitor.app
[loaded] com.bresink.driver.BRESINKx86Monitoring (7.0) Support
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (8.0 18615.948847) Support
[not loaded] com.parallels.kext.hypervisor (8.0 18615.948847) Support
[not loaded] com.parallels.kext.netbridge (8.0 18615.948847) Support
[not loaded] com.parallels.kext.usbconnect (8.0 18615.948847) Support
[not loaded] com.parallels.kext.vnic (8.0 18615.948847) Support
/Applications/Toast Titanium v11.1/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/Applications/Toast Titanium/Toast Titanium v11.1 (1072).app
[not loaded] com.roxio.TDIXController (2.0) Support
/Library/Application Support/Symantec/AntiVirus
[loaded] com.symantec.kext.SymAPComm (12.2f1 - SDK 10.6) Support
/System/Library/Extensions
[loaded] com.Logitech.Control Center.HID Driver (3.9.0 - SDK 10.6) Support
[loaded] com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) Support
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) Support
[not loaded] com.increw.kext.speedit (0.32) Support
[loaded] com.logitech.manager.kernel.driver (4.10.0 - SDK 10.8) Support
[not loaded] com.olympus.CamBlockCommandsDevice (2.0.0) Support
[not loaded] com.olympus.CamBlockCommandsDeviceUP (2.0.0) Support
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
[loaded] com.symantec.kext.internetSecurity (5.2f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ips (3.5f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ndcengine (1.0f1 - SDK 10.6) Support
[loaded] com.taoeffect.ispy.kext (2.0.2 - SDK 10.2) Support
/System/Library/Extensions/OlympusDSCDriver.kext/Contents/PlugIns
[not loaded] com.olympus.CamFWSerialBusProtocolTransport (2.0.0) Support
[not loaded] com.olympus.CamUSBMassStorageClass (2.0.0) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
/Users/[redacted]/Downloads/LCC Installer.app
[not loaded] com.Logitech.Unifying.HID Driver (1.3.1 - SDK 10.8) Support
Startup Items: ℹ️
TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] com.canon.MFManager.plist Support
[not loaded] com.cooliris.SetLaunchArch.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[running] com.logitech.manager.daemon.plist Support
[running] com.micromat.TechToolProAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[running] com.symantec.uiagent.application.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[running] com.eltima.ElmediaPlayer.daemon.plist Support
[loaded] com.embraceware.awaken.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.micromat.TechToolProDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.prosofteng.DriveGenius.locum.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
[loaded] com.symantec.liveupdate.daemon.ondemand.plist Support
[failed] com.symantec.liveupdate.daemon.plist Support
[not loaded] com.symantec.sep.migratesettings.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
[running] com.taoeffect.ispyd.plist Support
[running] com.wdc.drivemanagerservice.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.prosofteng.DGMonitor.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.taoeffect.EspionageHelper.plist Support
User Login Items: ℹ️
Speedy Mac Application (/Applications/Speedy Mac/Speedy Mac.app)
AwakenHelper Application (/Users/[redacted]/Library/Application Support/Awaken/AwakenHelper.app)
GetBackupAgent Application (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
WDDriveUtilityHelper Application (/Users/[redacted]/Downloads/WD/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
ClustersHelper Application (/Library/PreferencePanes/Clusters.prefPane/Contents/Resources/ClustersHelper.a pp)
RealPlayer Downloader Agent Application (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
SAVDiskMountNotify UNKNOWN (missing value)
ScanNotification UNKNOWN (missing value)
Launch Nikon Message Center 2 Application (/Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app)
Internet Plug-ins: ℹ️
EPPEX Plugin: Version: 10.0 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 9.4.6 Support
Unity Web Player: Version: UnityPlayer version 3.5.3f3 - SDK 10.6 Support
NPVirtools: Version: 4.0 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.6.8r638 Support
QuickTime Plugin: Version: 7.7.1
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
GarminGpsControl: Version: 2.9.3.0 Release Support
ToontownBundleManager: Version: (null) Support
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
OVSHelper: Version: 1.0 Support
CoolirisWebKitPlugin: Version: (null) Support
Google Earth Web Plug-in: Version: 6.1 Support
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
User Internet Plug-ins: ℹ️
BrowserPlus_2.9.2: Version: 2.9.2 Support
Picasa: Version: 1.0 Support
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video>
Open in Internet Explorer
DivX HiQ
Aimersoft Video Converter
3rd Party Preference Panes: ℹ️
BrowserPlus Support
Clusters Support
Déjà Vu Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Logitech Control Center Support
Logi Preference Manager Support
MenuMeters Support
Perian Support
Symantec QuickMenu Support
TechTool Protection Support
Tuxera NTFS Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
iMac TimeMachine [Local]
Total size: 2 TB
Total number of backups: 80
Oldest backup: 2011-09-18 05:21:33 +0000
Last backup: 2014-10-05 20:18:55 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 0 B X 3)
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Top Processes by CPU: ℹ️
      2% WindowServer
      0% Speedy
      0% SystemUIServer
      0% RealPlayer Downloader Agent
      0% ps
Top Processes by Memory: ℹ️
288 MB SymDaemon
150 MB Speedy
137 MB Safari
82 MB WebProcess
82 MB coreservicesd
Virtual Memory Information: ℹ️
2.17 GB Free RAM
1.46 GB Active RAM
148 MB Inactive RAM
518 MB Wired RAM
388 MB Page-ins
0 B Page-outs
I hope someone has some ideas! TIA.

Do you have another cable you can test with? Do you have access to another computer with Firewire you can test with?
FireWire Device not Working
FireWire/USB - Quick Assist

Similar Messages

I have a mac, In"Design CS 5.5, a design gave me a file said it was CS 6, does not open in CS 5.5..Message says "Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign." I think I need to buy upgrade fro

I have a mac, In"Design CS 5.5, a design gave me a file said it was CS 6, does not open in CS 5.5..Message says "Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign." I think I need to buy upgrade from 5.5 to 6. I found one on NextTechDirect for $150 to download. they are not a scam according to "scamadvisor.com."
When I drag the InDesign file that that was supplied by another designer who said it was CS 6 onto my desktop it says CS 5.5. Is that because I only have CS 5.5?
Should I buy this
Adobe InDesign CS6 Upgrade from CS5.5 WIN/MAC [Download] from Next tech....it is obviosly higher on the adobe site and alot of other places?

No one is likely to recommend where you buy your software from other than Adobe in these forums... not so much because of support for Adobe, but mostly because of lack of support/knowledge of any third party vendors. I only know from experience that when you invest in bargain pricing you usually get what you pay for.

Is it wise/ok to use and external hard drive that requires Tuxera NTFS for Mac.dmg to be installed?

I had a white screen issue twice recently and freaked out. I got everything back but worried now that my imac will crash and I will lose
all my files/pictures. I purchased an external hard drive, a Toshiba Canvio 3.0 Plus with 1TB to install to backup my files. I went to
install it and it says that for Mac you must install Tuxera NTFS for Mac.dmg, which says it enables read/write support for the NTFS
partition on your Mac. Is this a good way to back of files on a Mac? If not what is better? Is there an Apple product for back up?
Please help I am clueless and worried about the dreaded white screen!

sketchgirl wrote:
I purchased an external hard drive, a Toshiba Canvio 3.0 Plus with 1TB to install to backup my files. I went to
install it and it says that for Mac you must install Tuxera NTFS for Mac.dmg, which says it enables read/write support for the NTFS
partition on your Mac.
Depending on whether you need to use this as a boot drive and what model iMac you have (PPC or Intel) you will need to reformat the drive as a GUID or APS drive with Disk Utility. OSX Tips: Using Disk Utility: Format, Erase, or Reformat a Drive

"Finder" does not function after installing Leopard on Mac G5

After successfully installing Leopard on my (new) MacBook Pro and on my (old:2003) iMac PowerMac 6,1 I tried installing Leopard on my 2005 iMac G5.
The installation seemed successful, but after restarting the computer I was asked to choose the wireless network from a list. This was not possible. I do not use the Airport on this computer so tried to press "cancel". Could not do this and got the turning rainbow circle which never stopped.
*The Finder does not function and cannot be restarted. This seems to be the main problem.
I cannot log off or shut down and have to use the powerbutton to shut down.
When starting up I do not get the Startup sound. Do get login and can login. But, all my desktop buttons have disappeared and I immediately get a notice that OS X shut down unexpectedly, asking me to cancel or send a report. Neither of these options are possible and the turning rainbow reappears. It's driving me crazy!
I can sometimes open programs but no longer "system preferences".
Is there anybody out there who can help me??
I am especially frustrated since the other two installations on an older and on a newer Mac went well. I use the exact same programs on all three computers.
HELP!

After successfully installing Leopard on my (new) MacBook Pro and on my (old:2003) iMac PowerMac 6,1 I tried installing Leopard on my 2005 iMac G5.
The installation seemed successful, but after restarting the computer I was asked to choose the wireless network from a list. This was not possible. I do not use the Airport on this computer so tried to press "cancel". Could not do this and got the turning rainbow circle which never stopped.
*The Finder does not function and cannot be restarted. This seems to be the main problem.
I cannot log off or shut down and have to use the powerbutton to shut down.
When starting up I do not get the Startup sound. Do get login and can login. But, all my desktop buttons have disappeared and I immediately get a notice that OS X shut down unexpectedly, asking me to cancel or send a report. Neither of these options are possible and the turning rainbow reappears. It's driving me crazy!
I can sometimes open programs but no longer "system preferences".
Is there anybody out there who can help me??
I am especially frustrated since the other two installations on an older and on a newer Mac went well. I use the exact same programs on all three computers.
HELP!

ASA5505 L2L VPN does not function after move and reconfiguration

                   I have an ASA5505 that had multiple VPNs to both Cisco5505's and other Vendor security appliances. The one in question that moved to a new IP address checks out on isa sa, ipsec sa and nat, yet there is no communication accross the tunnel. This behavior is consistent accross all remote sites. The remote sites function normally. Below is the output with some show commands.
ASA Version 8.4(4)
hostname RitterBars
names
name 67.231.37.42 RitterLAB-ASA
name 67.231.37.45 RitterLAB-LB-WAN1
name 64.233.131.94 RitterLAB-LB-WAN3
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport access vlan 3
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
description Port 7 on 9108
nameif outside
security-level 0
ip address dhcp setroute
interface Vlan3
no forward interface Vlan2
nameif CoreNetwork
security-level 0
ip address 172.20.10.22 255.255.255.128
boot system disk0:/asa844-k8.bin
ftp mode passive
clock timezone CST -6
clock summer-time CST recurring
object network obj-192.168.1.0
subnet 192.168.1.0 255.255.255.0
object network obj-192.168.9.0
subnet 192.168.9.0 255.255.255.0
object network obj-192.168.85.0
subnet 192.168.85.0 255.255.255.0
object network obj-10.200.1.0
subnet 10.200.1.0 255.255.255.0
object network obj-192.168.3.0
subnet 192.168.3.0 255.255.255.0
object network obj-192.168.1.2
host 192.168.1.2
object service obj-tcp-source-eq-22
service tcp source eq ssh
object service obj-tcp-source-eq-5922
service tcp source eq 5922
object network obj-192.168.1.10
host 192.168.1.10
object service obj-tcp-source-eq-5125
service tcp source eq 5125
object service obj-tcp-source-eq-80
service tcp source eq www
object network obj-192.168.1.119
host 192.168.1.119
object service obj-udp-source-eq-69
service udp source eq tftp
object network obj-192.168.1.51
host 192.168.1.51
object service obj-tcp-source-eq-443
service tcp source eq https
object service obj-tcp-source-eq-5980
service tcp source eq 5980
object network obj-192.168.1.114
host 192.168.1.114
object network obj-96.43.39.27
host 96.43.39.27
object network obj-xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object-group network Inside
network-object 192.168.1.0 255.255.255.0
access-list split-tunnel extended permit ip 192.168.1.0 255.255.255.0 192.168.9.0 255.255.255.0
access-list no_nat extended permit ip 192.168.1.0 255.255.255.0 192.168.9.0 255.255.255.0
access-list no_nat extended permit ip 192.168.1.0 255.255.255.0 192.168.85.0 255.255.255.0
access-list no_nat extended permit ip 192.168.1.0 255.255.255.0 10.200.1.0 255.255.255.0
access-list no_nat extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list VPN2LAB extended permit ip 192.168.1.0 255.255.255.0 192.168.85.0 255.255.255.0
access-list VPN2LAB extended permit ip 192.168.1.0 255.255.255.0 10.200.1.0 255.255.255.0
access-list Barracudalab extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list inat extended permit ip 192.168.1.0 255.255.255.0 any
access-list vnat extended permit ip 192.168.1.0 255.255.255.0 host 216.163.29.244
access-list out2in extended permit tcp host 64.233.128.6 host 192.168.1.2 eq ssh
access-list out2in extended permit tcp 64.233.128.0 255.255.255.0 host 192.168.1.2 eq ssh
access-list out2in extended permit tcp 64.233.128.0 255.255.255.0 host 192.168.1.10 eq 5125
access-list out2in extended permit tcp 64.233.128.0 255.255.255.0 host 192.168.1.10 eq www
access-list out2in extended permit udp 64.233.128.0 255.255.255.0 host 192.168.1.119 eq tftp
access-list out2in extended permit tcp 64.233.128.0 255.255.255.0 host 192.168.1.51 eq https
access-list out2in extended permit ip 64.233.128.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list out2in extended permit tcp any host 192.168.1.10 eq 5125
access-list out2in extended permit tcp any host 192.168.1.10 eq www
access-list out2in extended permit tcp any 192.168.1.0 255.255.255.0 eq ftp
access-list out2in extended permit tcp any 192.168.1.0 255.255.255.0 eq ftp-data
access-list out2in extended permit udp any host 192.168.1.119 eq tftp
access-list out2in extended permit tcp any host 192.168.1.51 eq https
access-list out2in extended permit icmp any any
pager lines 24
logging console alerts
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu CoreNetwork 1500
ip local pool vpn-pool 192.168.9.10-192.168.9.250
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-649.bin
no asdm history enable
arp timeout 14400
nat (inside,any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-192.168.9.0 obj-192.168.9.0 no-proxy-arp
nat (inside,any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-192.168.85.0 obj-192.168.85.0 no-proxy-arp
nat (inside,any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-10.200.1.0 obj-10.200.1.0 no-proxy-arp
nat (inside,any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
nat (inside,outside) source static obj-192.168.1.2 interface service obj-tcp-source-eq-22 obj-tcp-source-eq-5922
nat (inside,outside) source static obj-192.168.1.10 interface service obj-tcp-source-eq-5125 obj-tcp-source-eq-5125
nat (inside,outside) source static obj-192.168.1.10 interface service obj-tcp-source-eq-80 obj-tcp-source-eq-80
nat (inside,outside) source static obj-192.168.1.119 interface service obj-udp-source-eq-69 obj-udp-source-eq-69
nat (inside,outside) source static obj-192.168.1.51 interface service obj-tcp-source-eq-443 obj-tcp-source-eq-5980
nat (inside,outside) source static obj-192.168.1.114 obj-96.43.39.27
nat (inside,CoreNetwork) source dynamic obj-192.168.1.0 interface destination static obj-xxx.xxx.xxx.xxx obj-xxx.xxx.xxx.xxx
nat (inside,outside) source dynamic Inside interface
nat (inside,outside) after-auto source dynamic any interface
access-group out2in in interface outside
route CoreNetwork 172.20.30.0 255.255.255.248 172.20.10.1 1
route CoreNetwork 216.163.29.244 255.255.255.255 172.20.10.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 0:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set psset esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto map samap 1 match address VPN2LAB
crypto map samap 1 set peer RitterLAB-ASA
crypto map samap 1 set ikev1 transform-set ESP-AES-256-SHA
crypto map samap 2 match address Barracudalab
crypto map samap 2 set peer RitterLAB-LB-WAN1 RitterLAB-LB-WAN3
crypto map samap 2 set ikev1 transform-set ESP-3DES-SHA
crypto map samap interface outside
crypto isakmp identity address
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 11
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access inside
dhcpd dns 64.233.128.10 64.233.128.11
dhcpd auto_config outside
dhcpd address 192.168.1.100-192.168.1.150 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 66.187.233.4 source outside
ntp server 64.99.80.30 source outside
webvpn
username xxx.xxx.xxx.xxx password xxx.xxx.xxx.xxx encrypted privilege 15
username xxx.xxx.xxx.xxx attributes
vpn-group-policy WebVPNpolicy
username xxx.xxx.xxx.xxx password xxx.xxx.xxx.xxx encrypted privilege 15
username xxx.xxx.xxx.xxx attributes
vpn-group-policy WebVPNpolicy
tunnel-group 67.231.37.42 type ipsec-l2l
tunnel-group 67.231.37.42 ipsec-attributes
ikev1 pre-shared-key xxx.xxx.xxx.xxx
tunnel-group 67.231.37.45 type ipsec-l2l
tunnel-group 67.231.37.45 ipsec-attributes
ikev1 pre-shared-key xxx.xxx.xxx.xxx
tunnel-group 64.233.131.94 type ipsec-l2l
tunnel-group 64.233.131.94 ipsec-attributes
ikev1 pre-shared-key xxx.xxx.xxx.xxx
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect xdmcp
inspect ip-options
inspect tftp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:bcdf7281cbf323ff6af7457149529a5b
: end
RitterBars# sh isa sa
IKEv1 SAs:
   Active SA: 2
    Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 2
1   IKE Peer: 67.231.37.45
    Type    : L2L             Role    : responder
    Rekey   : no              State   : MM_ACTIVE
2   IKE Peer: 67.231.37.42
    Type    : L2L             Role    : initiator
    Rekey   : no              State   : MM_ACTIVE
There are no IKEv2 SAs
RitterBars# sh ipsec sa
interface: outside
    Crypto map tag: samap, seq num: 1, local addr: 96.43.41.168
      access-list VPN2LAB extended permit ip 192.168.1.0 255.255.255.0 192.168.85.0 255.255.255.0
      local ident (addr/mask/prot/port): (192.168.1.0/255.255.255.0/0/0)
      remote ident (addr/mask/prot/port): (192.168.85.0/255.255.255.0/0/0)
      current_peer: 67.231.37.42
      #pkts encaps: 4, #pkts encrypt: 4, #pkts digest: 4
      #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
      #pkts compressed: 0, #pkts decompressed: 0
      #pkts not compressed: 4, #pkts comp failed: 0, #pkts decomp failed: 0
      #pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
      #PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
      #send errors: 0, #recv errors: 0
      local crypto endpt.: 96.43.41.168/0, remote crypto endpt.: 67.231.37.42/0
      path mtu 1500, ipsec overhead 74, media mtu 1500
      current outbound spi: 6F98A015
      current inbound spi : 6DD466F0
    inbound esp sas:
      spi: 0x6DD466F0 (1842636528)
         transform: esp-aes-256 esp-sha-hmac no compression
         in use settings ={L2L, Tunnel, }
         slot: 0, conn_id: 1122304, crypto-map: samap
         sa timing: remaining key lifetime (kB/sec): (4374000/28182)
         IV size: 16 bytes
         replay detection support: Y
         Anti replay bitmap:
          0x00000000 0x00000001
    outbound esp sas:
      spi: 0x6F98A015 (1872273429)
         transform: esp-aes-256 esp-sha-hmac no compression
         in use settings ={L2L, Tunnel, }
         slot: 0, conn_id: 1122304, crypto-map: samap
         sa timing: remaining key lifetime (kB/sec): (4373999/28182)
         IV size: 16 bytes
         replay detection support: Y
         Anti replay bitmap:
          0x00000000 0x00000001
    Crypto map tag: samap, seq num: 2, local addr: 96.43.41.168
      access-list Barracudalab extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
      local ident (addr/mask/prot/port): (192.168.1.0/255.255.255.0/0/0)
      remote ident (addr/mask/prot/port): (192.168.3.0/255.255.255.0/0/0)
      current_peer: 67.231.37.45
      #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
      #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
      #pkts compressed: 0, #pkts decompressed: 0
      #pkts not compressed: 0, #pkts comp failed: 0, #pkts decomp failed: 0
      #pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
      #PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
      #send errors: 0, #recv errors: 0
      local crypto endpt.: 96.43.41.168/0, remote crypto endpt.: 67.231.37.45/0
      path mtu 1500, ipsec overhead 58, media mtu 1500
      current outbound spi: 51AF17EA
      current inbound spi : 859BC586
    inbound esp sas:
      spi: 0x859BC586 (2241578374)
         transform: esp-3des esp-sha-hmac no compression
         in use settings ={L2L, Tunnel, }
         slot: 0, conn_id: 1118208, crypto-map: samap
         sa timing: remaining key lifetime (sec): 28152
         IV size: 8 bytes
         replay detection support: Y
         Anti replay bitmap:
          0x00000000 0x00000001
    outbound esp sas:
      spi: 0x51AF17EA (1370429418)
         transform: esp-3des esp-sha-hmac no compression
         in use settings ={L2L, Tunnel, }
         slot: 0, conn_id: 1118208, crypto-map: samap
         sa timing: remaining key lifetime (sec): 28152
         IV size: 8 bytes
         replay detection support: Y
         Anti replay bitmap:
          0x00000000 0x00000001
RitterBars# sh nat int inside
Manual NAT Policies (Section 1)
1 (inside) to (any) source static obj-192.168.1.0 obj-192.168.1.0   destination static obj-192.168.9.0 obj-192.168.9.0 no-proxy-arp
    translate_hits = 0, untranslate_hits = 0
2 (inside) to (any) source static obj-192.168.1.0 obj-192.168.1.0   destination static obj-192.168.85.0 obj-192.168.85.0 no-proxy-arp
    translate_hits = 18, untranslate_hits = 0
3 (inside) to (any) source static obj-192.168.1.0 obj-192.168.1.0   destination static obj-10.200.1.0 obj-10.200.1.0 no-proxy-arp
    translate_hits = 0, untranslate_hits = 0
4 (inside) to (any) source static obj-192.168.1.0 obj-192.168.1.0   destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
    translate_hits = 0, untranslate_hits = 0
5 (inside) to (outside) source static obj-192.168.1.2 interface   service obj-tcp-source-eq-22 obj-tcp-source-eq-5922
    translate_hits = 0, untranslate_hits = 0
6 (inside) to (outside) source static obj-192.168.1.10 interface   service obj-tcp-source-eq-5125 obj-tcp-source-eq-5125
    translate_hits = 0, untranslate_hits = 9094
7 (inside) to (outside) source static obj-192.168.1.10 interface   service obj-tcp-source-eq-80 obj-tcp-source-eq-80
    translate_hits = 0, untranslate_hits = 126
8 (inside) to (outside) source static obj-192.168.1.119 interface   service obj-udp-source-eq-69 obj-udp-source-eq-69
    translate_hits = 0, untranslate_hits = 0
9 (inside) to (outside) source static obj-192.168.1.51 interface   service obj-tcp-source-eq-443 obj-tcp-source-eq-5980
    translate_hits = 0, untranslate_hits = 195
10 (inside) to (outside) source static obj-192.168.1.114 obj-96.43.39.27
    translate_hits = 0, untranslate_hits = 0
11 (inside) to (CoreNetwork) source dynamic obj-192.168.1.0 interface   destination static obj-216.163.29.244 obj-216.163.29.244
    translate_hits = 107, untranslate_hits = 0
12 (inside) to (outside) source dynamic Inside interface
    translate_hits = 35387, untranslate_hits = 2940
Manual NAT Policies (Section 3)
1 (inside) to (outside) source dynamic any interface
    translate_hits = 291, untranslate_hits = 78

I just recently got the triple play package from verizon with fios too. And of course the Actiontec is total crap. The very first night it rebooted over and over again. What good is an internet connection you can't use right... Anyways, I have a cisco 831 that i use for a VPN to work, and so, I decided to put that up front.
Anyways, had the same problem. First I setup my router to bridge the connetion from the Actiontec to my router. So it goes Broadband Moca -> Actiontec LAN -(eth cable)-> Cisco WAN port. This worked great, except now my vod didn't work. So then I found this article....
http://www.dslreports.com/forum/r19559467-How-To-MI424WR-Network-Bridge-working-FIOS-TV
It was genius, add a second bridge from the Cisco LAN -(eth cable)-> Actiontec WAN -> local Moca.    And then put DHCP relay on the bridge. Everything worked again, hooray. then I added an access list, and there went my vod again.
So then I spent about two hours turning ports on and off and such, finally I figured it out. You'll need to allow inbound established tcp connections that internal hosts create. This will get back your guide and allow the vod menu to work again. then you have to allow inbound connections on udp port 21310. I applied it and lo and behold vod is back. Now my only problem is that the 831 only has a 10 Mb/s ethernet WAN, so I can't get HD VOD but ah well. I'll upgrade one of these days to an 851 or 871.
Here's what the access lists should look like in IOS:
permit tcp any host (your external IP address) established
permit udp any host (your external IP address) eq 21310
probably is going to be a little bit different since you have an ASA but I think you get the idea.

CC does not work after Uninstall and reinstall

Adobe 24/7 help online does not solve the problem. They come up and said to uninstall all, and as the result, I can not access ALL my software. Please help. Error message screen shot attached below.
This is on Home PC, OS: Windows7, 64bit, Core i5, 3.1GHz, 8GB RAM, was working properly more than a year or two. Now, I can not see ALL apps and the only see the "spinning wheel" for 10 minutes and shut down.

The Online chat support team ask me to do these stepts:
1) End all the Adobe related processes from the Task manager like Adobe CEP Helper,AAMupdater, AAMupdater notifier, Adobe Crash demon process, Coresync ,Creative Cloud.
2) Deleting the folders in various locations
3) Install the Creative Cloud Cleaner (.exe file) and run, clean ALL CC things
4) they give me a link to download and reinstall the CC
5) at the end, all the same problem. giving the same message as before "Microsoft Visual C++ Runtime Library - Runtime Error! Program: C:\Program Fi... "This application has requested the runtime to terminate it in an unusual way. Please contact the application's support team...."
Also, the support guy ask me to uninstall ALL CC Apps and I did it. NOW I have nothing left on my computer and I can not work. HELP

Keyboard does not function after mac mini goes idle

Hi. Interesting issue. New keyboard on my mac mini. Identification of keyboard (cheap Dynex) works fine. If I let mini go idle/screensaver, when it wakes up, it does not recognize the keyboard at all. Cannot manually force it to recognize either. Restart works like a charm and all is good until it goes idle again.
Anyone seen this? Any ideas?
Thanks.

I used a couple of cheapo PC oriented USB keyboards when I got my first Mac mini. They had issues where they would stop working after sleep, screen saver activation, or would start doing double key strokes, and other glitches. Honestly, if it's not an Apple keyboard or specifically made for the Mac, I've always had the keyboard develop issues at some point. I strongly suggest getting a proper Apple or made for Mac keyboard. It has solved all of my keyboard issues.

Using GPO to uninstall flash and then install latest version

Hello,
I wonder if someone could help me please. Please bare with me as I am new to Group Policy, Scripting and Command Line usage.
Given the recent security vulnerabilities in any Flash Player prior to 12.0.0.44 we need to get the latest version on all our clients asap. We have about 1000 clients ranging from Windows XP SP3 (95% of computers) and the rest a mix of Windows 7 x32/x64 bit and one Windows 8 machine. We have a very old Server 2003 SP2 tertiary Domain Controller setup and do not have the necessary GPO extensions to do some of the more useful things like computer file placement (for mms.cfg configs etc).
I apologise for my ignorance and lack of understanding with these things however I'm looking to do (what others seem to accomplish so easily over the Web) just two things:
1) Uninstall Flash Player from client machines using a "Computer-based" Group Policy (Note: This could be ANY version from version 10 to 12 so we don't have the luxury of "upgrading" via Group Policy as no previous policies exist for this, and it has to be a computer-based policy because we don't want the software to install for every user that logs on and also because they don't have Admin privileges)
2) Install the latest version of Flash Player (12.0.0.44) once the previous version have been removed (cleanly with no corruption/left-over registry keys etc)
I should point out I have successfully deployed the latest version to a test machine using a computer-based policy using a simple MSI package, however it installs it "alongside" the current version. This is not what we want. We want ALL traces of old version to be removed regardless of version and the LATEST version to be installed in its place.
Here's what I have tried so far:
1) Using a computer-based logon script called 'flash.bat' that contains the following in an attempt to remove existing versions:
start /wait "\\<UNC path to network share>uninstall_flash_player.exe -uninstall" (Note: "Authenticated Users have 'read/execute' permissions to this share)
**This caused issues with an elevated command window being left open indefinately, so I added a /B to the end which solved that, however the script didn't work.
I tried different permutations of adding the double quotes after the "exe", around the "-uninstall" etc to no avail. I even tried introducing a time-delay by pinging localhost at the beginning of the script to see if that made a difference, but it didn't.
2) Using a 3rd-party MSI Packaging Tool (ECMO Enterprise Edition) to "capture" the uninstall process on a clean WinXP SP3 build, which then creates a compiled MSI which you use to deploy via Group Policy as normal - however this didn't work as it just installed other "ECMO package" files in its place and ignores flash completely. I was going to try another MSI tool but haven't had the time to do that as yet.
I'm a bit stuck at the moment..... not sure what to do next and I've been tasked to get this resolved for the whole organisation with little to no knowledge of the processes involved (harsh I know but that's the reality of my job unfortunately; things just "shoehorned" or "slopey shouldered" onto me)
Any advice would be very much appreciated
Kindest Regards
David.

I found a solution in the form of this script, which was customised to meet our needs. http://forums.adobe.com/message/4583529
The only issue is the "check" part is flaky (although this could be due to DC replication intervals [we did force replication however]). We need a way for a flag to be set and checked so that the script doesn't run everytime at startup; because this will undoubtedly cause our Helpdesk to be flooded with calls from disgruntled users complaining that their login time has increased by 13.7 seconds.....

LabPython does not function after being built into an executable application (am i missing DLLs or Paths?)

Greetings!!
I have recently been playing around with the amazing power of Python in Labview and have built some very functional VIs that utilize this tactic. However I now find myself at a bind. Everything runs great in the IDE, but not so great as a standalone application.
i am running:
Windows 7 64bit
Labview 2012 32bit
Python 2.7.3 32bit
My build specifications configuration attempts have all failed to run Python, and the application typically always return a very non descriptive error such as:
PYTHON New Session__ogtk.vi->NameOfMyVIFile.vi
I have tried adding DLLs to the "always include" section of the build spec.
DLLs such as:
Lvpython.dll
pytscript.dll
and I have even tried including them in both the support directory and the caller's directory to no avail. I have even tried placing the entire application + supporting files in my main Labview and python directories just to see their behavior with no apparent differences.
so now I’m left with no options that i can think of. and I'm sure I have crawled around Google so much now that I’ve read all the same posts and websites nearly three times already.
Please help me debug this!! I’m sure it’s something super simple but not very obvious that I’m missing.
I hope everyone has a great day, and thank you!
Grant.
Solved!
Go to Solution.

My python installation folder is "C:\Python27" and python27.dll is located in there.
initially i ran the "PYTHON Set Server Path" with an input string equal to: 'C:\Python27\python27.dll' while in the IDE. i have read however that (as long as the system path in windows is configured correctly) passing a string of just 'python27.dll' would work, but i did not try this.
after that the "PYTHON Script Node" is what i used to test LabPython and all's ok in the IDE but not in applications.
i have also tried this as an executable:
Which porduces this:

Exchange 2010 anti-spam does not work after uninstalling Forefront

I installed Forefront Security for Exchange for testing, and later removed it because I couldn't afford to let Forefront use over 1GB of RAM on my server. After removal, the built-in anti-spam wasn't working anymore. I discovered that content filtering had been disabled, so I re-enabled it but spam still sails on through. I reinstalled the hub transport role and enabled anti-spam, but the spam keeps on coming. I checked the headers on incoming email for SCL and PCL stamps, there are none. What else can I check that Forefront may have monkeyed with?

Hi,
Thank you for the post.
Before going any further, I’d like to confirm whether you have installed Forefront Security for Exchange(FSE) on Exchange 2010. In fact, it cannot be installed.
As far as I know, you should install Forefront Protection 2010 for Exchange Server (FPE) on Exchange 2010. When you installing FPE, the opt into antispam will disable Exchange's basic content filtering agent as FPE installs its own content filtering agent. And uninstalling FPE will not re-enable this agent so you will have to do so manually.
Regards,
Nick Gu - MSFT

5112 trig input does not function after selfcalibration ?

After starting the selfcalibration on 5112, the Trig input seems not to function as before.
This occurred after installation of a new driver "NI-SCOPE 2.90"
Driver: NI-SCOPE 2.90, Model: NI PXI-5112, Compiler: MSVC 7.10, Engine: IVI 2.04, Compiler: MSVC 7.10, Components: VISA-Spec 3.00
Can i revert to factory default ?
Thanks in advance, John

Correction !!
This behavior was not caused by the driver installation but the trigger input has an 500mV accuracy.
My signal was smaller then 500mVtt so the self calibration calibrated
the levels of the trigger input somewhat different and my triggering
was lost.
Thats why my conclusion was wrong!!
John

Ir remote does'not function after upgrading from Vista to Windows 7

I just upgraded to Windows 7 Pro from Vista Home Premium. I was able to get most of my drivers to work; however, I was not able to find th edrivers/software for my IR remote control. Has anyone else figured this issue out, or what drivers/software I should get fix the error? Thank you.

ArtAppreciator, I have the same problem. Installed Windows 7 and now my HP USB TV Tuner is not working. Worked fine on Vista. I can get passed the signal setup but get an error when Media Center tries to detect the IR receiver. Any thoughts?

Microphone does not function after installing Windows 7 RC on a HP Mini 1000 (1030NR)

Hi. I recently purchased a HP Mini 1000 (1030NR) and upgraded it to Windows 7 Release Canidate. After install, I added the trackpad drivers, and everything else works fine except for the microphone. The computer recognizes it but when I speak nothing happens. The volume is turned up, and if I turn up the Mic Boost, all I hear is static. I have installed what I think are the correct drivers from another poster, to no avail. Also, there are no errors in the device manager. ANy ideas?
Thank you in advance.

As a tempory measure search for SP40662 this package will enable the mic but there is a catch (isnt there always). The catch is that the mic is going to be recognized as the external one and if you plug in headphones you will have to reboot the mini to use the internal mic again. Im using the same set up right now and it works fairly well. Just hope that HP decides to bestow upon us the proper drivers for the mini soon.

HT4623 I have an iPad 1 (original) and there does not seem to be an update available as the device tells me that I have the latest version iOS 5.1.1

Need to know how to update my iPad 1 to iOS 6.0 or better? I have iOS 5.1.1 and the device shows not updates available as this is supposed to be the latest update.??????

sparker2512 wrote:
Need to know how to update my iPad 1 to iOS 6.0 or better? I have iOS 5.1.1 ...
The iPad 1 can only update as far as iOS 5.1.1

Mozilla sudenly will not launch. There is no error messege it just ignore me. Uninstalled then installed latest version. Same thing happens. Can you advise? Thanks,

I have tried launching from the desktop shortcut, the all programs area (regular and safe mode)and directly from the programs folder. But it won't come up and I do not get an error messege. I have used Mozilla for years without a problem.
Thanks

You've gone thru much trouble even tinkering with registry. Don't you think its time to make a backup of your system & do a clean install of t he os? And without installing any other program install first the pc suite. I assumed you got the correct cable & pc usb are working.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed latest version of Tuxera NTFS for Mac.

Similar Messages

Maybe you are looking for