Firmware Version 4 1 106 1982 of IomegaEZ MAL PERFORMANC​E and improve performanc​e

Firmware Version 4.1.106.31982 of IomegaEZ MAL PERFORMANCE !!! and improve performance?
I upgraded to version 4.1.106.31982 the IomegaEZ and enter SETUP MAL has PERFORMANCE WEB, it is very slow unlike the previous firmware version; as performance improves VERSION of this? You can return to the previous version without losing data?
Thank You
Ruben Arno
ESPAÑOL
Version de Firmware 4.1.106.31982 de  IomegaEZ de MAL RENDIMIENTO !!! como mejorar el rendimiento ?
He actualizado a la version 4.1.106.31982 el IomegaEZ y al ingresar al SETUP WEB tiene MAL RENDIMIENTO,  es muy lento a diferencia de la version de firmware anterior; como se mejora el rendimiento de esta VERSION ? se puede volver a la version anterior sin perder datos ?
Gracias
Ruben Arno

Hello pcyservice
There is NOT a way to downgrade/roll-back/revert to a previous firmware without wiping all data.  This is specifically mentioned on the firmware update page:
" CAUTION!
This update is not data destructive, however, ALWAYS back up your data before performing any firmware update!
Once you have updated the firmware, you will NOT be able to revert to an older firmware version."
I recommend you disable any unnecessary features/protocols such as Media Server and Active Folders, then reboot the unit.
If you are still experiencing performance issues, please contact LenovoEMC support to troubleshoot further.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Similar Messages

  • Did the most recent update and now my TB Display turns off randomly on both my air and mini. I running  TB Firmware Version:     23.6

    did the most recent update and now my TB Display turns off randomly on both my air and mini. I running  TB Firmware Version:
    23.6

    When did you get this firmware version?  My TBD is at 22.2 and the TBD bus is at 23.4.  I thought I had the latest firmware.

  • Air update phone firmware version

    How do you update phone firmware version?
    1. Download Nokia pc suite and use NSU or Nokia ovisuite (For Windows User only)
    2. Try over the Air update (MAC/Windows User)
    If your mobile data rates allow, try doing an over the air update. Support varies by phone, variant and software
    Go to tools >Utilities> Device manager (location may vary by device)
    There should be an updates tab
    This functionality may not be available in your device. Contact your service provider for more information
    To view or update the current software version of your device or to check the date of a possible previous update, select Menu> Tools> Utilities> Device mngr
    To check whether software updates are available select Options> Check for Updates
    First off BACK UP YOUR DEVICE! make sure you have a back up of the memory card and also the device memory and make sure that the battery of your device has enough power or connect the chager before starting update. To start the update select access point. The device starts to download the device data.
    When the data is downloaded the update description is displayed. Select Accept to accept the download of the update package or cancel to cancel the download. IT may take several minutes and you can use your device during the download but not during installation time.
    Server Profile Settings
    Menu> tools> utilities> Device Manager
    to add a new server profile seleat Options> New server profile.
    Contact your service provider for correct settings
    Server name- Enter a name for the configuration server
    Server Id- Enter the unique ID to identify the configuaration server
    Server Password- Enter a password to identify your device to server
    Access point- Select the access point to connect to the server
    Host Address- Enter the url address of server
    Port-Enter the port number of the server
    User name & password- Enter your username and password for the server
    Allow configuration- To allow receiving configuration settings from this server select yes
    Auto Accept all requests-To have your device ask for your confirmation before accepting configuration from this server. Select NO
    Network Authentication- Select if network authentication is used. Enter your Network username and Network password to identify your device to the server.
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

    Like how did nothing happen  >> no connection >> no message ??
    CAN I UPDATE   >>
    http://europe.nokia.com/support/download-software/device-software-update/can-i-update
     jje

  • Update Nokia phone firmware version

    How do you update phone firmware version?
    1. Download Nokia pc suite and use NSU.(For Windows User only)
    2. Try over the Air update (MAC/Windows User)
    If your mobile data rates allow, try doing an over the air update. Support varies by phone, variant and software
    Go to tools >Utilities> Device manager (location may vary by device)
    There should be an updates tab
    This functionality may not be available in your device. Contact your service provider for more information
    To view or update the current software version of your device or to check the date of a possible previous update, select Menu> Tools> Utilities> Device mngr
    To check whether software updates are available select Options> Check for Updates
    First off BACK UP YOUR DEVICE! make sure you have a back up of the memory card and also the device memory and make sure that the battery of your device has enough power or connect the chager before starting update. To start the update select access point. The device starts to download the device data.
    When the data is downloaded the update description is displayed. Select Accept to accept the download of the update package or cancel to cancel the download. IT may take several minutes and you can use your device during the download but not during installation time.
    Server Profile Settings
    Menu> tools> utilities> Device Manager
    to add a new server profile seleat Options> New server profile.
    Contact your service provider for correct settings
    Server name- Enter a name for the configuration server
    Server Id- Enter the unique ID to identify the configuaration server
    Server Password- Enter a password to identify your device to server
    Access point- Select the access point to connect to the server
    Host Address- Enter the url address of server
    Port-Enter the port number of the server
    User name & password- Enter your username and password for the server
    Allow configuration- To allow receiving configuration settings from this server select yes
    Auto Accept all requests-To have your device ask for your confirmation before accepting configuration from this server. Select NO
    Network Authentication- Select if network authentication is used. Enter your Network username and Network password to identify your device to the server.

    Before updating your Nokia's firmware you should check that the newer version does not break Bluetooth and iSync abilities.
    From the many reports on these and other forums, it seems people who have recently updated their Nokia phones firmware have found it impossible to get their phone and Mac to communicate.

  • UPDATE: Lifeline Firmware Version 4.0.4.14600 (7/16/2013)

    Firmware Version 4.0.4.14600 for EZ Media & Backup Center 
    https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/32028 
    Firmware Version 4.0.4.14600 for ix2 and ix2-dl 
    https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/31178 
    Firmware Version 4.0.4.14600 for ix4-300d 
    https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/32096 
    Firmware Version 4.0.4.14600 for px2-300d 
    https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/32094 
    Firmware Version 4.0.4.14600 for px4-300d 
    https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/27363 
    Firmware Version 4.0.4.14600 for px6-300d 
    https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/27366 
    Firmware Version 4.0.4.14600 for px4-300r 
    https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/27368 
    Firmware Version 4.0.4.14600 for px12-350r and ix12-300r 
    https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/23142 
    Firmware Version 4.0.4.14600 for px12-450r and px12-400r 
    https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/32092

    Al,
    I don't understand your anger. In your first message
    you posted that you installed OS 9 and updated it to
    9.2.2. So why don't you do that again on the 700 MHz
    iMac?
    I find it very amusing that somehow you see anger in my post. That is realy very funny! The reason I didn't just simply install OS 9 on the 700MHz Imac is stated in my original post. I would need a special (the original disk that came with this computer) bootable OS 9.1 disk to install 9.1 on this particular computer. However if there are retail 9.2 or greater disks available then that would work to. I own a retail version of 9.1 that I used for the 400MHz Imac. That wont work on the 700MHz Imac. So now I have to buy a another OS 9 disk. Thanks for your input. Al

  • Iomega iConnect Firmware Version 2.5.26.18966

    Hi,I have downloaded the Iomega iConnect Firmware Version 2.5.26.18966, try to install and get the message that there is not enough space on the divice. Has anyone been able to resolve this issue ? How ? thanks,sfp

    Hello schulz
    Double check that Media Sharing is enabled for each of the root share folders under the "shares" page.
    Try turning media server off, restart the unit, then turn media server back on and run a media scan.

  • Problem with restore.I have a 2 gen running firmware version 4.2.1

    Hello there !
    Hopefully some smart persons here will be able to help me. First it has been awhile since i used my itune store because i didnt needed to and did a format of my computer after the last time i used it..so i had to upload my library etc and start from scratch. I downloaded a couple new games,everything was working fine..then when it came the time to sync and put these games on my ipod touch 2 gen the installation failed. I retried again and it keeps failing again and again so i choose to do a restore on it and expecting the problems would be solved. Problem wasnt not solved at all and it said an error (6) occured and i have the image on my ipod of the white cord trying to connect to itune store.
    Restore doesnt work at all and it seems like my ipod is totally useless as i cant use it anymore. I did the diagnostic..it said no ipod were found. I also did the check up thing for the technician so ill paste it here maybe it will give some clues..
    I have this error now as well... No iPod, iPhone, or iPad found. It also said secure link to itune store failed..not sure if these are all related to the same problems or all different at all..im clueless and need a generous soul to help me out.
    Thank you tons for the help !
    @Edit : Even with my other 2gen ipod i cant install these new games,it keeps failing as well..but at leasnt i havent done Restore on it yet and i fear to do it for reason you guys can guess.
    Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
    System manufacturer System Product Name
    iTunes 10.3.1.55
    QuickTime 7.6.9
    FairPlay 1.11.17
    Apple Application Support 1.5.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.1.2
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 2.0.5.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 00AAB2F80F513CD0
    Current user is an administrator.
    The current local date and time is 2011-07-17 18:45:37.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce 9500 GT
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:     {B00FE55A-1662-4EE9-B880-6B076869B9F8}
    Description:     Contrôleur Atheros L2 Fast Ethernet 10/100Base-T
    IP Address:     192.168.2.10
    Subnet Mask:     255.255.255.0
    Default Gateway:     192.168.2.1
    DHCP Enabled:     Yes
    DHCP Server:     192.168.2.1
    Lease Obtained:     Sun Jul 17 17:51:16 2011
    Lease Expires:     Wed Jul 20 17:51:16 2011
    DNS Servers:     192.168.2.1
    Active Connection:     Connexion réseau
    Connected:     Yes
    Online:          Yes
    Using Modem:     No
    Using LAN:     Yes
    Using Proxy:     No
    SSL 3.0 Support:     Enabled
    TLS 1.0 Support:     Enabled
    Firewall Information
    Windows Firewall is off.
    ZoneAlarm Firewall is installed.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was unsuccessful.
    The network connection timed out.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-07-17 18:43:19.
    **** Device Connectivity Tests ****
    iPodService 10.3.1.55 (x64) is currently running.
    iTunesHelper 10.3.1.55 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Contrôleur d'hôte ouvert PCI vers USB NEC.  Device is working properly.
    Contrôleur hôte PCI vers USB standard étendu.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C8.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C9.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CA.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CB.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod touch (2nd generation) running firmware version 4.2.1
    Serial Number:     9E01226F201
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    thats just rubbish ! i bought it secondhand for my daughter to use for music and apps, but its not compatible with anything, any suggestions other then throwing it away?

  • How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

    The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
    I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4).  Everytime I open the airport utility I get the following message: "
    This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
    I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
    One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
    I'm getting the exact same message on my other computer, a Mac Air.
    So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
    Thanks!

    See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

  • Will firmware version 4.1.7 automatically update to 4.1.9?

    I recently upgraded to OS 10.3 from OS 10.0 on my Imac 700MHz G3. The installation documentation said that I would be prompted to upgrade the firmware if I needed to. I was not prompted so I went ahead and did the OS 10.3 installation. The firmware remained version 4.1.7f4 after the install.
    Not too long ago I went through the same procedure on my Imac 400MHz DV. The only difference is that I started the upgraded process from OS 9.I, then to 9.2.2 using the updates (ending at the latest version of 9), then to 10.0, and then to 10.3. And finally updating with 10.3.9 combo to OS 10.3.9. During that whole process I never new about firmware and never checked to see what version I had before starting this process. After all of the above installations were finished I ended up with firmware version 4.1.9f1.
    My concern is with the 700MHz G3 IMac. I'd like to update to 10.3.9 using the combo update but I'm concerned about the firmware. Will firmware 4.1.7f4 be updated automatically to 4.1.9f1 after the combo OS 10.3.9 is installed? Or should I erase the disk again and start over by first installing firmware update 4.1.9? Actually if that were the case I wouldn't be able to update my firmware since I don't have the correct bootable version of OS 9 on disk that is required for that computer. However my previous experience with the installations on the 400MHz DV suggests to me that that the firmware will automatically be updated. But I would like confirmation from the experts. I'd hate to spend all that time downloading and installing all of the latest updates (Combo 10.3.9, etc.) only to find that the firmware version is incorrect.
    Thanks!
    Al

    Al,
    I don't understand your anger. In your first message
    you posted that you installed OS 9 and updated it to
    9.2.2. So why don't you do that again on the 700 MHz
    iMac?
    I find it very amusing that somehow you see anger in my post. That is realy very funny! The reason I didn't just simply install OS 9 on the 700MHz Imac is stated in my original post. I would need a special (the original disk that came with this computer) bootable OS 9.1 disk to install 9.1 on this particular computer. However if there are retail 9.2 or greater disks available then that would work to. I own a retail version of 9.1 that I used for the 400MHz Imac. That wont work on the 700MHz Imac. So now I have to buy a another OS 9 disk. Thanks for your input. Al

  • HP OfficeJet Pro 8600 Plus Firmware version not current on the HP Downloads Page

    My HP OfficeJet Pro 8600 Plus came with Firmware version CKP5CN1334ER which the printer update says is up-to-date. The HP downloads page shows CLP1CN1322CR as the current version. Can you tell me what the differences are in version 1334 from the one (1322) on the web page?
    It would be nice to have the latest version posted for download to prevent confusion.

    Same question here.

  • How do you determine the firmware version for a laptop docking station?

    How do you determine the firmware version of a HP docking station?
    Laptop Model: HP 2740p
    OS: 64bit Windows 7
    Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
    Thank you for any assistance.
    Alvin

    atenpo wrote:
    How do you determine the firmware version of a HP docking station?
    Laptop Model: HP 2740p
    OS: 64bit Windows 7
    Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
    Thank you for any assistance.
    Alvin
    WA995AA#ABA shows to be a hard drive, not a docking station

  • How do I determine current firmware version for WRT54G

    I've been poking around the site a bit, and note that there are mandatory upgrades to various firmware versions. I'd like to upgrade if necessary, but have no idea how to determine what firmware version I have right now.Message Edited by shelmart on 12-17-200605:36 AM

    What is the excact hardware version # of your router? U can find that underneath the router itself, there's a sticker there & its just right below the Linksys Logo. If its version 5 or 6, u can go to this website: www.linksys.com/connect . Download  & save Easylink Firmware Tool & then before u run that file after saving, disable first all your internet security like firewalls & anti- virus coz it will block the connection of this software from running properly. That EFL will automatically upgrade the firmware of your router.

  • Need a Script to Audit Firmware version of HP components​.

    Hi Team,
    I am new to this portal, I am not sure if i have selected the correct board for this issue. If not please redirect thie thread to the correct team or guide me the link to the HP Blade system portal.
    My issue:
    We have 285 HP Servers, Where almost 275 are HP Proliant BL460 G7 & G8 Blades and the rest are HP DL380P and DL380 Standalone servers.
    We recently did a HP SPP Update on all these machines and now for a reason we want to Audit if the component updates were correctly done by our engineers or not.
    How ever for HP OS Components i have a script to Scan the registry and pull the Product version and match it to see if it has the Latest version or not.
    But how do i do an Audit for the ILO'S of these machines and the Onboard Administrators and the HP Virtual connect if the firmware versions are correct or not ?
    Is there any script or any Method to achieve this ? 
    We also have HP SIM tool as well, Can we do it form that? If yes then how ? Can any one please help in this ?

    Frederik, After some tweaking and testing i was able to get it working, I haven't tested it via GPO as a startup script but standalone it is doing what i was after. I cant thank you enough for helping me on this as i had lost hope after days worth of intense
    searching
    Change that i had to apply ( space in a network path
    was causing a "path not found error", Had to rename the "Office365 update" and update the path in Customconfig.xml  or any other location that was pointing to "office365 update" )
     set DeployServer=\\contoso\c2r\Office365 update\
    REM Set ConfigFile to the configuration file to be used for
    deployment (required)
    set ConfigFile=\\contoso\c2r\Office365 update\Customconfig.xml
    REM Set LogLocation to a central directory to collect script
    log files (install log files are set in XML file).
    set LogLocation=C:\AppData\Local\Temp

  • N96 ON OPTUS! FIRMWARE VERSION 11.101 UPDATE AVAIL...

    Ye Gods!!!
    I tried updating this morning and was still told by NSU that 10.065 was still the current version. I phoned Optus to find out how the ticket I lodged three weeks ago about 'approving the release' was going, only to be told there was no resolution and that the ball was in Nokia's court.
    I rang Nokia again to see if there was ANY way this could be done, and lo and behold, as we went through the same process again, it said version 11.101 was available for download!!
    HOO-BLOODY-RAY!!!
    The download is 116MB, and is downloading as I write.
    Time will tell if this solves my problems...
    Stay tuned!
    Message Edited by iannicholson on 11-Dec-2008 03:45 AM
    Ian Nicholson
    Poor Sod/N96 Owner
    Nokia: Connecting People... with iPhones.

    Oh dear...
    Here's my experience with updating the N96 to Firmware 11.101
    So, the phone was plugged in and fully charged as prescribed. The update file downloaded and then proceeded to install. It estimated 15 minutes to go.
    With 2 minutes to go, the phone appeared to reboot, and displayed a plain, white screen, with:-
    11.101
    Test Mode
    Nokia
    displayed in upside-down landscape on the screen. It stayed like this, and about every ten minutes, would disconnect from the PC (hearing the USB disconnect sound), the screen would go white, and reboot again to show the same Test Mode display.
    I called Nokia Tech Support. They had never seen this issue before. They advised I disconnect and reboot the phone, which I did, but had to remove the battery in order to get it out of Test Mode. The NSU program on the PC locked up and I had to delete the app from Windows Task Manager.
    The phone rebooted, apparently trouble-free. The menu and the screen rotate seem ever-so-slightly more responsive, however, there was little improvement on the voice dialling. In fact, trying to dial in this way caused the phone to crash and reboot. I will say, this was a 'soft' reboot, not a complete and utter bomb like before. Is this an improvement? I don't know!
    Trying to fast-forward through a video by holding the 'Next track' button down does not work. It continues to show the last frame displayed, while the sound and time do indeed fast forward and play correctly.
    I can't comment on the battery life as yet, but the upgrade process DID take a lot out of it, so be sure to be fully charged before attempting to upgrade (or have your power charger connected).
    That's all for now...
    Ian Nicholson
    Poor Sod/N96 Owner
    Nokia: Connecting People... with iPhones.

  • Nokia N80 new firmware version 4.0707.0.7

    It's so bad firmware version!
    I have lots of problems with new firmware version 4.0707.0.7 that I haven't with past version 4.0623.0.42 !
    I can't understand what's going on with NOKIA Software Updater!
    >I can't enter to my "Gallery\Images & Video" from "Camera Mode"
    >My OS speed decrease
    >Captured photos don't show in "Images & Video" until I restart my N80
    >For each new files you add, you need to restart your N80 until your N80 find them in memory!!!
    Why past version haven't these PROBLEMS and new version have them!!!
    Does anybody know how can I return to my past firmware version (mean 4.0623.0.42) ? Is it possible?Message Edited by zoologist1 on 03-May-200712:28 PM

    04-May-200710:53 PM
    djassa1 wrote:
    Basically it means that BB5 phones like N-Series including N80 and E-series cannot be downgraded to a previous version once they have been upgraded. Trying that with third party tools, because it's not possible through NSU, will brick (dead) your phone, period.
    That's why I said you'd have to take the phone to a service center.

Maybe you are looking for

  • How to reveal XML tags in InDesign CS5.5?

    I'm trying to tag a business catalog for an XML export. I've never done it before - but our sister company has done the same task with a similar catalog. I can view their catalog in InDesign CS5.5 for Windows over a VPN connection in order to see how

  • IWeb - Can I add a countdown clock ?

    Hello all. Could anyone tell me if its possible to add a clock on my iWeb to countdown the days, hours, minutes to a certain event ? I am publishing to my .mac account. Thanks in advance for any help. Regards, Paul P

  • How to create a transparent animation in cs5?

    Can anyone help with me with creating a transparent animation in cs5? Chirstmas Songs: https://www.youtube.com/watch?v=VGh1jKyPCwU

  • Realm AD groups not working

    Strange issue with realms and AD groups. We can authenticate in a realm with individual AD users, but if those users are added to a AD group they can no longer authenticate. This is after we remove the individual users from the realm. Local users and

  • Error : Default quantity and uom in opportunity.

    Hi, I did default quantity as a 5 and default uom as a CM in getter method after saving opportunity  it's showing error  : item xyz enter the unit of measure ment. and for quatity we did but it's not showing in web ui. this is code below i redefine t