First DL Burn - Error Layer 0 exceeds maximun layer size?

The entire DVD size is 6.1G. I have 4 menu's. Don't understnand this message. "Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."

What is happening is that there needs to be a marker in the project located where the layer break should occur.
The first Layer (Layer 0) needs to be larger than the second Layer (Layer 1)
Basically it means DVD SP cannot find a proper break point where it will comply with the above
Take a look at pg 576-580 or so in the PDF, goes into more detail (cannot be larger than 3.9 binary, see pg 578)

Similar Messages

  • I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message.  It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

    I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message.  It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
    Kris

    It means your file is too large to fit on a single layer disk.
    Recompress to keep the overall size (audio,video and menus) below 4.5GB
    x

  • Error Burning Dual layer DVDs

    I can burn single layer dvds and cds just fine however every time i try to burn Dual layer DVDs i get error message that there is a hardware failure. I have tried several DVD manufactures to no avail. I finallly had a hunch there was a corrupt file someplace so i created a new user account and burned the file from using Finder and the dual layer burned just fine with my new user account. I repaired permissions on the bad user account (USing the snow leopard dvd and using the Disk utlity) and still no luck. has anyone had or have heard of this issue? Any ideas on how to find the corrupty file causing Dual layer dvd burns to crash? Btw i have used Toast, Finder and Itunes to try and burn the dual layers. Any info on this would be great

    Yep, I have the same problem. I've re-booted, check all logs, and I get the same error. I was burning the same file, the first two DVD's went well, then I got the Communication error.
    I make a living in Graphics, so my clients have to have the files I've created... This is a MAJOR issue!

  • Dual Layer DVD Burn - Error "Mac OS Error -5001"

    I have a Powermac G5 dual 1.8 (Machine Model PowerMac7,2) - I upgraded the stock DVD burner to a Lacie Dual Layer burner model SH-S162L Internal. Burns single layer discs and CDs just fine... It will not burn dual layer discs, video_Ts, disc copy, nor data DVD DL's...
    I've tried different media, new system install, updating drivers, even contacting Lacie who has sent me a new drive, which I installed today to the same end result of very expensive plastic coasters.
    Lacie seems to be no help, and I can't find anything similar on these groups. I'm using Toast 7.0.2. Anyone have any suggestions? My sanity (and DVD budget) are running out! =)

    Hi Christopher,
    Please check to see if you have file sharing turned on. In the OS9 era, a -5001 error involved accessing or deaccessing a shared volume, I seem to recall. If file sharing is on, try just turning it off.
    Good Luck,
    John

  • HELP!!! layer 0 exceeds the maximum layer size allowed (DVD STUDIO PRO)

    when I try to burn a dual dvd with 7.1 gb on it. The discs are 8.5gb dual dvd's, it says this in the error box.
    Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.
    I have tried to dual layer break point on a chapter half way through and other locations, but it still says it. What do I do???? I need to get this done ASAP!!!!! Can you please help, its kinda a emegency!!!!!!
    please email me back at [email protected]
    Thanks so much
    G5   Mac OS X (10.4.6)  

    Hey timeline
    welcome to the apple boards...
    ill give you the easy fix, although i would recommend the proper fix.
    first, build your project on any of your drives so you can see your audio and video TS folders.
    once you see your build, then click on "Format" and before you click on format (on the lower right hand corner of the Format window, click on the second tab and under "Layer Break" click the drop down box and whatever is NOT greyed out, can be used as a layer break.
    the more proper way do it it would require you to do some calculations based on the amount of video in your project and re-encode your video.
    hope that helps
    Mikey M.

  • Formatting was not successful.  Layer 0 exceeds the maximum layer size

    I am attempting to burn my first dvd w/ dvdstudio pro. I pressed burn. Processing took approximately 25 minutes. Everything seems to be goin well. The I get the following message,
    "Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."
    Can anyone help me out with this?
    The following info was in the build log,
    Starting DVD Build MUSICVIDEOMIXTAPE...
    Compiler Initializing...
    Precompiling Project MUSICVIDEOMIXTAPE
    Compiling VMG Information...
    Created 8 PGCs in VTSM1
    Created 5 PGCs in VTSM2
    Created 8 PGCs in VMG.
    1 Menu(s) will be created...
    Compiling Menu PGCs...
    Compiling Menu#1 (Menu 1)...
    Rendering Menu:Menu 1,Language:1...
    Generating Transition: VTSM #01, VOB #1...
    Writing VIDEO_TS.VOB
    Compiling Menu PGCs...
    Writing VTS020.VOB
    2 VTSs and 2 Titles will be created...
    Compiling VTS#1 (drivin me wild- Common & Lilly Allen)...
    Muxing VTS011.VOB
    Done.
    Compiling VTS#2 (d12 vid mix tape)...
    Writing VTS020.VOB
    Muxing VTS021.VOB
    Done.
    Linking VMG...
    Linking VTS#1...
    Linking VTS#2...
    Writing VTS#1...
    Writing VTS#2...
    Writing VMG...
    Writing Layout Info...
    Compile Completed Successfully
    Note: The file ‘MUSICVIDEOMIXTAPE.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

    It sounds like you are trying to burn a dual layer disc. Do you need a dual layer disc? (i.e., do you have more than 4.3 GB of material?) If you do then there is a tutorial at;
    http://www.kenstone.net/fcphomepage/dual_layer_mediagary.html

  • Please help! why is the DVD burner not burning dual layer media in my G5?

    I have tried, unsuccessully, to burn dual layer DVD's on my G5 using the latest iDVD software (iLife '08) but to no avail. I switch to dual layer in iDVD but invaribly, I always get a multiplexing error at the end of the burn. Any suggestions?
    Rick

    Are there any plans to update OS 10.4.11 to include a firmware update for the DVD drive? Or has it already been changed in Leopard?
    Depending on what model of Superdrive you have, there may be a firmware update from the manufacturer, just not from Apple. Updating to the latest firmware from the manufacturer often provides for better media compatibility, faster burn speeds, and sometimes even features that were disabled by Apple's version of the firmware.
    DVD-R DL discs have one major drawback if you're using them to burn video DVDs - you have no control over where the layer break is placed. The first layer must always be filled completely before any data is written to the second layer. DVD+R DL does not have this limitation. You can place the layer break anywhere you like, just as long as the first layer is more full than the second.

  • W5x0 cannot burn dual layer DVDs

    I bought a W510 as a host for a scanner in late 2010.  My T60p was having fan problems and I liked the W510 so much that I bought a W520.  Originally I was going to use the W520 for the scanner/photo processing but frankly the monitor on the W510 tunes up a little better so I'm staying.
    I've been trying, with no luck whatsoever, to burn dual layer DVDs.  The W520 came with Corel DVD software that does not have verify as an opction (I can't believe it but it appears to be true).  I use the W510 for most of it and it has the old tried and true Roxio.   I installed the Roxio on the W520 so they are equal.
    The two systems came with different DVD writers.  The W510 MAT**bleep**A DVD-RAM UJ8A0A and the W520 a HL-DL-ST DVDRAM GT30N.  Neither drive in neither system can works.  
    I can write about 1 of 10 discs on either system/drive (I've made a lot of coasters over the past month).
    At first I thought it was related to the Memorex media.  Last week before I went out of town I got some other vendors, and started with the Kodak discs but I'm getting hockey pucks at the same failure rate as Memorex, so I conclude the media is not the root cause.
    I also have an external USB drive, Lite On  with a HL-DT-ST DVDRAM GE24LU20 drive in it that also will not work.   The external drive says is it supports up to 8x write speed, but rarely gets above 3-4, but it still makes coasters.
    I've tried limiting the write speed to 2.4x but it still makes coasters.
    I can't believe with a 2 host, 2 drive matrix that there is a drive or system failure involved.  There just has to be something else going on. 
    Does anyone have any suggestions? 
    Thanks!
    Tony

    Another fact set. On the failures, 40% of them fail during the write, another 40% fail during the verify pass with a compare error, and the remaining 20% cannot be read after the burn.
    On my old system the reflectivity of the disc after writing was uniform. On the write failures you can see big gaps in the write band. Sometimes it fails in the first few minutes (before the capacity consumed would switch to the second layer).
    For others even when successful the reflectivity of the disc almost makes it look like the write portion didn't finish the write pad out to finish the disc, and I think some of the read errors are occurring in layer 1 past the transition region. The Roxio software has the option to finish the disc but the Corel burn.now and the included windows DVD ISO burner do not.
    Writing dual layer has never worked on my W510 but my T60p didn't have troubles. What I don't know is whether the difference is T60 to W5x0 or Windows XP to Windows 7.
    Again, any suggestions welcome.

  • Getting Error of Runtime Exceeded while generating OTF for PDF in smartform.

    Hi All,
    I am getting a error of runtime exceeded while generating OTF file for PDF in smartform through FM. The report is taking too much time before giving the output...and most of the time going to dump saying report has exceeded the runtime. All is working well till the Smartform FM reached. I debugged this FM and found that the TABLES parameter is having problem, may be there are too many tables in that parameter.Please help. Below is the code-
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname           = c_form_name
      IMPORTING
        fm_name            = v_fm_name
      EXCEPTIONS
        no_form            = 1
        no_function_module = 2
        OTHERS             = 3.
    CALL FUNCTION   v_fm_name
      EXPORTING
        control_parameters      = wa_control
        output_options             = wa_output
        user_settings                = 'X'
        spl_gl                         = p_spl_gl
        open_dt                      = p_budat
        bukrs                         = p_bukrs
        w_check                    = w_check
        w_check1                   = w_check1
      IMPORTING
    *   document_output_info =
        job_output_info                  = wa_otf
    *   job_output_options     =
      TABLES
        kna1                       = t_kna1
        bsid_p                     = t_bsid_p
        bsid                         = t_bsid
        TEXT                       = t_text
        spl                           = t_spl
        bsid_x                      = t_bsid_x
        bsid_l                       = t_bsid_l
        bsid_h                      = t_bsid_h
        bsid_q                     = t_bsid_q
        bsid_tot                   = t_bsid_tot
      EXCEPTIONS
        formatting_error           = 1
        internal_error             = 2
        send_error                 = 3
        user_canceled              = 4
        OTHERS                     = 5

    Hi
    Yes as Eltan says you need to consider there are two blocks of abap program:
    - the first one is the driver program (but it seems there's no problem here because it called the smartform quickly)
    - the second one is inside the smartform (It's possible to write abap routine in the smartform), and it seems the problem could be here
    The variable c_form_name has the name of the smartform, you can manage it by transaction SMARTFORMS
    but now it's not possible to say you why the print takes too long time, you need to do a trace
    Max

  • Disk Utility: Burn error: 0x80020022 The device failed to respond...

    I've been working on archiving a ton of video to DVD. I'm using Dual-Layer discs to minimize the amount of physical storage space needed for the finished project. I burned several discs in iDVD in July and regularly received errors. Then the drive suddenly stopped loading any type of media. Anything I inserted would spin briefly and then eject. Repaired permissions and followed steps outlined here and here. Took the Mac back to the store where I bought it (sadly, not an Apple Store - nearest one is 12 hrs away) where naturally it performed flawlessly for the store rep.
    So I took it home and resumed burning, now saving as a disc image (ignoring iDVD's warning about the performance of DVDs burned this way) and using Disk Utility, since iDVD didn't seem to be reliable. Burned about 25 discs, error-free, in this fashion, then three days ago, got the error: "Unable to burn “Disc 19.img”. (The device failed to respond properly, unable to recover or retry.)"
    Retried the same image, and it worked. Then burned two more in the same fashion with no errors. Today I got the same error again. Logs are identical for each failed burn, except for the time span between certain lines.
    Price of DL media being what it is, I'd hate to keep ruining discs if there's something I can do to avoid it. I suppose it could be bad media, but it seems odd that I'd get two bum discs that close together after burning so many without issue. Checked the site and the forums, and there doesn't seem to be any answers. Does anyone have any ideas? (Other than "try a different brand of media." I've got a buttload of these discs and it's too late to return them now.) Even if it just helps determine where the issue lies. Warranty will be up soon, so if it's hardware related, I need to get it taken care of quick.
    Media: Philips DVD+R DL 8x
    *Drive info:*
    HL-DT-ST DVDRW GS21N:
    Firmware Revision: SA15
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: Insert media and refresh to show available burn speeds
    DiscUtility.log:
    2009-10-03 08:54:01 -0600: Burning Image “Disc 22.img”
    2009-10-03 08:55:15 -0600: Image name: “Disc 22.img”
    2009-10-03 08:55:15 -0600: Burn disc in: “HL-DT-ST DVDRW GS21N”
    2009-10-03 08:55:15 -0600: Erase disc before burning: No
    2009-10-03 08:55:15 -0600: Leave disc appendable: No
    2009-10-03 08:55:15 -0600: Verify burned data after burning: Yes
    2009-10-03 08:55:15 -0600: Eject disc after burning
    2009-10-03 08:55:15 -0600:
    2009-10-03 08:55:15 -0600: Preparing data for burn
    2009-10-03 08:56:30 -0600: Opening session
    2009-10-03 08:56:35 -0600: Opening track
    2009-10-03 08:56:35 -0600: Writing track
    2009-10-03 09:01:37 -0600: Finishing burn
    2009-10-03 09:02:37 -0600: Closing session
    2009-10-03 09:02:38 -0600: Finishing burn
    2009-10-03 09:38:37 -0600: Burn failed
    2009-10-03 09:38:37 -0600: The device failed to respond properly, unable to recover or retry.
    2009-10-03 09:38:37 -0600: Additional information can be found in the ~/Library/Logs/DiscRecording.log log file.
    2009-10-03 09:38:37 -0600: Unable to burn “Disc 22.img”. (The device failed to respond properly, unable to recover or retry.)
    DiscRecording.log:
    Disk Utility: Burn started, Sat Oct 3 08:55:15 2009
    Disk Utility: Burning to DVD+R DL (CMC MAG D03) media with DAO strategy in HL-DT-ST DVDRW GS21N SA15 via ATAPI.
    Disk Utility: Requested burn speed was 47x, actual burn speed is 4x.
    Disk Utility: Burn failed, Sat Oct 3 09:37:15 2009
    Disk Utility: Burn sense: 4/44/90 Hardware Error,
    Disk Utility: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
    Message was edited by: Weasel42

    I have encountered the same problem. I have a Mac Book Pro from 2007, and it has gone through 3 DVD writers so far, all of which have ruined DVD+R DL disks. I have occasionally been able to burn one, but usually during verify, I get this error message:
    Communication to the disk drive failed: 0x8002022
    And disk utility fails with a "Invalid B-tree node size" error
    Oddly, when I try to burn a disk near capacity (6.5Gb or more) it is more likely to fail than if I burn a smaller disk.
    I've been using Memorex DVD+R DL disks, but I have used other brands in the past but they have failed, too. Out of about 50 disks so far, I have had success with about 5.

  • CD burn error in Waveburner

    I'm trying to do my first CD burn and getting an error: "CD is incompatible, try another brand, etc.", It does the first step of bouncing the session document, and then fails a few seconds into writing the first track. The CD's I'm using are Memorex, and I tried it both at 8x and 24x. Any advice? Thanks

    Good news/bad news. Through trial and error, I found that I can burn the CD if I click "Burn" and then insert the blank CD, rather than inserting the CD first. However, my resulting CD, when played, just goes "click click click" for every song. What's wrong?

  • Burn error 4420

    I can't burn any CDs off of iTunes anymore. I never had a problem til about a month ago. It burns up to 6 songs and then it ejects the CD and says it was unable to burn Error 4420. I ran CD diagnostics and it says all the songs are on the CD, however when I put the CD into a stereo...only a few play. I thought this was just with my purchased songs because that's all it was at first. Now, it won't burn any of the songs I have in iTunes.

  • Runtime error(Time limit exceeds)after executing select query

    Dear experts, whenever i executing the select query in this zprogram i am getting runtime error that time limit exceeds.i am using inner join and into table.after that also i am geetting error. how can i resolve it??
    SELECT LIKP~VBELN LIKP~WADAT_IST LIKP~VEHICLE_NO LIKP~TRNAME
              LIKP~VEHI_TYPE LIKP~LR_NO LIKP~ANZPK LIKP~W_BILL_NO
              LIKP~SEALNO1                                       " Seal NO1
              LIKP~SEALNO2                                       " Seal NO2
              LIPS~LFIMG
              VBRP~VBELN VBRP~VGBEL VBRP~MATNR VBRP~AUBEL VBRP~FKIMG
              VBAK~AUART
              VBRK~FKART VBRK~KNUMV VBRK~FKSTO
              FROM LIKP INNER JOIN LIPS ON LIKP~VBELN EQ LIPS~VBELN
                        INNER JOIN VBRP ON LIKP~VBELN EQ VBRP~VGBEL
                        INNER JOIN VBAK ON VBRP~AUBEL EQ VBAK~VBELN
                        INNER JOIN VBRK ON VBRP~VBELN EQ VBRK~VBELN
              INTO TABLE  I_FINAL_TEMP
              WHERE LIKP~VSTEL = '5100' AND
                 LIKP~WADAT_IST IN S_WADAT  AND
                    VBRP~AUBEL IN S_AUBEL AND
                    VBAK~AUART IN ('ZJOB','ZOR') AND
                    VBRK~FKART IN S_FKART AND
    *               VBRK~FKART IN ('ZF8','ZF2','ZS1') AND
                    VBRK~FKSTO NE 'X'.
    When I am debugging the select query.the cursor will not go to next step.after 15-20 minutes i am getting runtime error(time limit exceeds).
    how can i resolve it for that scenario??

    Looks like whole SD flow you trying to fetch in single query
    First you check the database statistic of these table are upto date in system ( Check with basis team )
    if this query was working fine earlier.
    Most of table involved are huge volume tables which queried with any primary key
    Any secondary index on created for LIKP on VSTEL WADET ?
    My suggestion would be split the selection queries and make use of primary or existing secondary index to fetch the desired result if possible. For testing purpose split the queries and find which is taking more time and which needs index by taking squel trace in ST05.
    Also take ST05 trace of this query in debugger ( New debugger -> special tool -> trace > ST05/SE30)

  • APO jobs cancelled due to error- Time limit Exceed.

    Dear All,
    Three jobs are scheduled daily to transfer data from R/3 to APO,
    These are cancelled due to error -"Time limit exceed".

    Hi Pankaj,
    There is a specific time allocated for each queue to clear and to get transferred across the system. the probable reasons are.
    1. The queue itself is taking more than the allocated time to clear due to system load. Each queue requires specific free memory from server , in case of overload system is unable to allocate desired memory hence the error might appear.
    2. If in a queue the very first entry is stuck due to x,y,z reason the queues following automatically go into "timeout" and then "system fail"
    Proposed solution.
    1. Analyze the first entry functionally. If Ok then ask the basis team to clear that particular entry.
    2. after time out the queue will go to "SYSFAIL". Double clicking on this will reveal the reason. Based on the technical reason I can suggest the relevant OSS notes to be applied.
    For detailed technical analysis check t-code CFG1.
    Regards,
    Ankur
    Edited by: Ankur Shrivastava on Dec 19, 2007 5:58 AM

  • Burn dual layer to 2 dvd5 discs

    according to the manual that when we put in the dvd5 disc to burn dual layer project dsp4 will automatically ask us to put in the 2nd dvd5 after the first layer as if we are burning into dtl tape but I have no luck laterly.
    please help
    thankx
    JP

    I encountered the following article when recently researching the same question however I have not tried it.
    How to format a Dual Layer project to two DVD-Rs
    http://www.rootdvd.com/public/98.cfm

Maybe you are looking for