First group of the first sub report begins to be printed on the second page.

Post Author: gdumencu
CA Forum: General
All of the following check boxes are unchecked:
ReportProperties -> Respect Keep Group Together On First Page
Group Options -> Keep Group Together
Section expert - all sections of the report and sub reports -> Keep Group Together
Is there any other thing I missed that will determine Crystal Reports to begin printing the first group on the second page?
Thanks, G

Post Author: zxcvb
CA Forum: General
I did following and it worked for me-
Right click sub report in the main report. In format subreport uncheck Keep Together.

Similar Messages

Blank first page and chart printing on the second page

I have a subreport in my report footer that displays a chart. The detail section is suppressed in the main report. For some reason the chart displays on the second page of the report and the first page is blank except for the report header and page footer. In the section expert the 'new page after' box is checked and grayed out so I can't remove the check to see if that solves the problem. I've never been particularly skilled in regards to reporting and in addition it's been quite a few months since I've even worked on a report. I'm using Crystal XI. Can anyone provide suggestions on where I might look to solve this problem.

Main Report
Report header--suppress blank section
Page header --suppress blank section; supress (no drill down) - page number = 1
Detail--Suppress (no drill down); suppress blank section
Page Footer--suppress blank section
Report Footer--suppress blank section
Sub Report
Report header a--suppress (no drill down) - {?Pm-?Graph Type}<>"Pareto" ; suppress blank section
Report Header b - suppress ( no drill down) - {?Pm-?Graph Type}<>"Pareto-Top 5" ; suppress blank section
Report Header c--Suppress blank section
Group Header #1a--Suppress (no drill down) - If {?Pm-?Graph Type}="Pareto-Top 5" or {?Pm-?Graph Type}="Pie-Top 5" then
{@nIncrement}>5
) ; Suppress blank section
Group Header #1b--Suppress ( no drill down) - {?Pm-?Graph Type}="Pareto" or {?Pm-?Graph Type}="Pie" ; Supress blank section
Detail--Suppress (no drill down); suppress blank section
Group Footer #1--Suppress (no drill down) ; suppress blank section
Report Footer--suppress blank section

On iCloud pages how can you put a header on only the first page and not the second page?

I'm trying the do a visual report and every time I put a header on the first page it goes to the next page and if I try to delete it on the second page it deletes on the first page too.

bump

How do I move an icon from the second page of my home screen to the first page and vice versa?

How do I move an icon from the second page of my home screen to the first page and vice versa?

Hold an icon down until they all wiggle.
Drag it wherever you want it.

How do you number pages but start the numbering on the second page, while omitting the page number from the first page (my title page)

I have recently changed from Word to Pages 5.5. I want to create a document with a title page (no number) and the second page as Page 1. It is quite simple to do in Word, but I cannot find a way to do it in Pages.

Hi Ryanlipp;
Insert a section break
Place cursor in the newly created section (page)
     In the Document panel:
select Insert page number: 1.
Under Numbering, select start at: 1
                 It starts numbering from number 1 in the new page (2nd page).
Now place the cursor in the previous page (Ist page).
Select Hide on first page section.
                 This hides page number in the first page of the document.
I hope, this is what you are after.
Regards,

Getting a field value from the first page on the second page in HTML

I have a 2 page form I'm presenting in HTML to the user. The first page they select an action, enter a USERID and click the next page button. (The button executes "xfa.host.pageDown();" on the click action at the server)
On the initialize of the second page I try to get the value of the USERID field from the first page and create a SQL statement to open my data connection. The issue I have is that I cannot get the value of the USERID field. This code works cause if I hardcode a valid value the query works. I tried to work around this by putting the same field on page 2, but it still did not work but the field was populated with displayed. I only assume the data is not populated at the time the initialize is invoked.
Here is my code on the initialize..
xfa.sourceSet.nodes.item(0).resolveNode("#command.query").commandType = "text"
xfa.sourceSet.nodes.item(0).resolveNode("#command.query").select.nodes.item(0).value = "Select * from TABLE where userid = '" + xfa.form.resolveNode("form1.Page1.txt_EmployeeLogin").rawValue + "'"
xfa.sourceSet.DataConnetion.open()
Any help is greatly appreciated.
THANKS!!

Hi Steve,
If you haven't already done so, I recommend posting this question in the LivCycle Forms forum.
Jared

I want to sign the SECOND page of a pdf document and this system won't let me scroll down past the first page!

I want to sign the SECOND page of a pdf document and this system won't let me scroll down past the first page!

Having the same issue, can someone please enlighten us?

HT2506 Is it possible to print separate pages on the same sheet in preview. I would like to split a set of class power points to display Page 1 and 2 on the first page, page 3 and 4 on the second page etc. Thanks in advance!

Is it possible to print separate pages on the same sheet in preview. I would like to split a set of class power points to display Page 1 and 2 on the first page, page 3 and 4 on the second page etc.
Thanks in advance!

Nevermind everyone!
I got it to work with Print Down/Across...silly me.
Thanks anyway!
-Arin

Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page i.e the reverse side of the page, in the correct direction?in the

Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page.... i.e the reverse side of the page.....in the correct direction?
It worked perfectly last week, now there are problems.
Thanks for any advice.

Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page.... i.e the reverse side of the page.....in the correct direction?
It worked perfectly last week, now there are problems.
Thanks for any advice.

Display Text in the Second page of the Report.

Dear,
I have a Report With Group G_Emp, having Columns Eno, Ename etc. in a Repeating frame R_1 and
I have put A frame below this repeating frame R_1 with a Text Item Just for Displaying Comments, so just i want to display this Text Item in the second page and the Employee details in the first page, the restriction is that the Text item should not print in the first page.
I hope you understand,
pls help.
Stalin Ephraim...

Hi,
if i understand well you could maybe try this :
or ) for your A frame below the repeating frame specify break page before = YES
or ) and if i understand your meaning correctly you want your comment to show once, on a seperate last page -->
in your layout section move the sdesign for your A frame from the main section into the traileer section.
regards, E.

How to let the data appears at the beginning of the second page?

Hi All,
I've created a form-like report and it's layout model is like this:
!http://up1.arb-up.com/files/arb-up-2009-9/Fgm23304.jpg!
You can see parent repeating frame number 1 and child number 2 in red
suppose that the normal frame containing f1 is suffused by fields within repeating frame 1
If I run the report the first page will appear normally, but the second page the field f2 will not appear at the beginning of it. I want the field f2 appearing at the beginning of page 2 because there is a blank space at the beginning of it.

give the property of the fiield f2 --> print object on -- All Pages.
and give the property of field F_2 and child repeating Frame property --> vertical elasticity -- variable

Oracle Reports -- printing 1/3 the way down the second page.

I modifying an Oracle Report that outputs a rtf-formmated word doc. When things go to the second page (because things on the first page have fully occupied the first page), they always appear 1/3 down the page. I would like them to be close to the top of the page as possible. Does anybody have any suggestions or ideas on how this should work?
thanks
Dan

Hi Dan,
I modifying an Oracle Report that outputs a rtf-formmated word doc. I did not get your above point
When things go to the second page (because things on the first page have fully occupied the first page), they always appear 1/3 down the page. I would like them to be close to the top of the page as possible. Does anybody have any suggestions or ideas on how this should work?As for this case there might be frames or Items displayed (Print Object On - First Page) at the top of the page which are not being displayed on the second page for all such frames and Items set the Vertical Elasticity to Variable.
Hope this helps.
Best Regards
Arif Khadas

Report Server 10g - unexpected font change on second page of the report

Hi all,
I'm having a problem with Oracle Report server 10.1.2.3.0.
It's sometimes using an unusual font (It think it looks like a Greek one).
One example would be when a text overflow from page one to the second page it will change from Times New Roman to a "Greek" font and switches from bold to normal font it still happens in the same "Text" type item just on a new page. However when I update the text in the DB to a longer one so it flows through the whole second page to the 3rd page then it's using the correct font again.
When I open the generated PDF file in a text editor I see an unusual value in one of the font settings "/BaseFont /#53#79#6D#62#6F#6C" when I edit it manually to the value taken from another occurrence of the "BaseFont" in the same file it helps and changes the font to the correct one.
When I export the report to the PDF from report builder it's always using the correct font.
The encoded font "/#53#79#6D#62#6F#6C" translates to: "Symbol"
select CHR(TO_NUMBER('53','xx'))||CHR(TO_NUMBER('79','xx'))||CHR(TO_NUMBER('6D','xx'))||CHR(TO_NUMBER('62','xx'))||CHR(TO_NUMBER('6F','xx'))||CHR(TO_NUMBER('6C','xx')) from dual;
The correct font is as expected "Times-Roman"
I noticed that this happens only when HTML code is allowed in the Text/field. When I generate HTML version of the report I see after the page break and new table on the new page the following tag <font face="symbol">. When I set Web Setting->"Contains HTML Tags" set to NO then font stays the same even after the page break.
Did anyone experienced something similar?
Thank you,
Palo

We have had this a few times before and there are 2 ways that most likley will fix this.
If on mac close all adobe apps, do a find for all files with the .lst in their file name. Delete all you .lst files, they are font database files that go corrupt and will regenerate themselves when needed and usually a working copy.
Close any multiple master fonts you have open in fontbook, and other utility such as Suitcase. Multiple master fonts will have a filename like "Kronos mm", and in the adobe illustrator type >> font menu i believe they have a different icon (possibly a mm) than the others {a(type 1), tt(true type), O (opentype)}
Your problem is likely the 1st option, as the mm problem usually happens while editing the file, while the other is after you open the file. If you still have the problem, you then may have 2 different fonts sharing the same FOND ID number. Close as many fonts as you can, especially the one that looks like your wrong font.

I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1"

I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1" How do I do this?

Hi H4S,
Click at the end of the Tile page.
Menu > Insert > Section Break.
Click in the second Section. Insert a page number in the Header or Footer.
Inspector > Layout > Section:
Regards,
Ian.

Print the the data in the second page

Hi.
In my report I have two repeating frames. I my layout editior i have the first one and then the second one. I want to print the second repeating frame from the first line of the second page onwards. I tried the properties of the repeating frame (page break before) and that works but it doesn't print from the begining of the page.
How to print it from the begining. Any Suggestions.
Thanks,
Priyabrata

Sorry, I assumed they were one above the other. If they are nested, then I see two possibilities ...
1. the first repeating frame doesn't normally appear at the top of the page either. in this case, you need to anchor that frame to a frame for all the objects above it so it will move up.
2. the space for the objects inside the first repeating frame is being reserved on subsequent pages. in this case, create a new frame around all the objects inside the first frame that are above the second frame. then anchor the second frame to that new one. alternatively, you could probably set the new frames vertically elasticity to variable.

First group of the first sub report begins to be printed on the second page.

Similar Messages

Maybe you are looking for