First tab of Lable Based Menu is not visible in Preview Mode

HI Genious,
I have added one Lable Based Menu in my application. If i apply the dynamic visibility to it, in preview mode 1st tab is not visible all other tabs are visible.
Ex. In Lable Based Menu, I have three label :- Distribution Center, Zoo, Bird Park. I have applied dynamic visibility to this component. In preview mode, I am not able to visible the first label (i.e. Distribution Center) while all other labes are working properly.
While i remove the dynamic visibility, All the labes are visible. But my application is not like that so i could not adapt that solution.
Regards,
Rishit

Hi Rishit,
Please let me know if you have applied Fix pacK3 for Xcelsius.
I have seen this issue in FP2, which got fixed in FP3. The workaround you can try is including a blank cell.
Thanks,
Amit.

Similar Messages

Value not visible in preview mode

Hello there,
On my dashboard, between other things, I have a simple grid component which should just show some resulted values.
The problem I have is that when I connect the grid with the range of cells, everything looks fine but in preview mode, one line in the midle of the grid is showing "0.0" on all cells of the line and I do not understand why.
The version I have is 5.3.4.0 with build no: 12.3.4.1038
Any idea what to do?
Thank you,

Hi,
When you are connecting your grid component it only taking static data, but while preview it is taking data from your data source. So I guess there is a possibility that your resulting data set contains a blank row (check your data from data source).
try to create one more data grid with the same data set, but fetch populate the data into different location. See if it is still giving you the same problem.
let us know if you already tried this before.
Good Luck.

3D Menu is not visible

i am using Adobe Photoshop CS5 Extended Edition
When i try to create 3D text or image
i am unable to do that
beacuse my
3D Menu is not visible
as u see picture:
click on the image for large size
what is wrong?
any idea?
Thanks....

Thank you for replying
This is my graphics card info:
some reason i can not update my graphic card
i think it is very old one
Click on image:
Preferences - 3D
as u see in image i am not able to do some changing
Click on image:
OpenGL Drawing in Preferences - Performance
can not enable OpenGL Drawing
it is disable
Click on image:
what do u think?

Placeholder content not visible in Preview

I am a RoboHelp10 newbie with two projects on the go, one inherited and one new. Placeholder content (breadcrumbs and Topic TOCs) is visible in Preview mode (Ctrl+W) in the inherited project, but not in the new project. They don't show in Firefox/IE Preview either. All other content/formatting seems to preview just fine. MS_HTML_Help is the designated primary layout for both projects. Based on a post in this forum, I tried updating DHTML effects, but it didn't help. Any suggestions?
I am assuming if they don't appear in Preview, they won't appear in the generated CHM. Correct?
RESOLUTION: I finally fixed the problem with brut force by starting a new project and importing the HTML pages, etc. Even then, it took a few tries before it worked. Still don't know the underlying cause.
Message was edited by: Steve@SSA on 16Nov2013

Vamsi mailed me offline and I have suggested looking at Using RH7 on my site where this problem is covered.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

Label Based Menu font not changing

When using the label based menu I am changing the font size from 13 to 16, setting it as bold, changing the color and saving the model. However, non of these changes are showing in preview mode or when exporting to pdf. How can I get this to work properly?

Hi Suzanne,
you need to install SP1, as this bug has been fixed there.
You can download SP1 here:
https://smpdl.sap-ag.de/~sapidp/012002523100007532212008E/cx2008_sp1.zip
You can find details on how to install in the message
Please install SP1 before posting!
Best regards,
Margaret

Photo gallery menu button not visible (black on bl...

Lately (I don't know when it changed because before it was not like this) there is some strange behavior on my N8 when viewing photos in the gallery.
If I chose a photo to view and then tap on screen to get the options I don't see the two buttons at the bottom of the screen (Options and Back buttons). I found out that the buttons are present but they are in black - meaning they are not visible if there is no picture covering those parts of the screen (see attached photos). They are only visible if the background is very bright (white).
Is there any settings to change this annoyance?
P.S. The same is true if I open pictures in Photo Editor.
Attachments:
P1050880.JPG ‏1634 KB
P1050881.JPG ‏2361 KB

Okay, I've tried .ac3 audio and I get the same result.
I had a friend of mine try this test. He had two different Progressive scan DVD players. It played perect on one and showed these errors on the other (the audio not playing and the text appearing in a different font). He said it had somthing to do with the progressive scan settings of the player. One player could switch to this type of DVD and the other one could only do it manually in the menu screen. He said that even hollywood DVDs do this on these types of DVD players. Since I have NEVER seen this problem before what could he be talking about? And why would previous versions of DVD's that I have made in DVD Studio Pro 1, 1.5 and 2 work fine on these same DVD players?
This is driving me nuts. Why would one DVD player play the DVD perfect and another one play the video fine, but mess up the audio and text buttons on the menu?
Other people I have talked to stay that it may be the media it is burned to, but I'm using the same DVD media that I have always used?
Please help!

Menu bar not visible

My Final Cut menu bar only appears when I move cursor to top of screen. Then it disappears when I move cursor away from top of screen. I am NOT in full screen mode. This issue began happening after I deleted preferences. Is there a way to have menu bar remain at top of screen without moving cursor there?

Did as you suggested and uninstalled BlackMagic drivers and trashed prefs using Digital Rebellion. Still no menu bar (see screen shot). When I go to Library>preferences, i see no FCP prefs. Is that unusual even after restarting FCPX?

SAP standard Menu : few menu paths not visible in Production but dev

Hi All,
We have a problem where in we can see the following menu path visible in standard menu in developement system; while the same menu path ( and few others also ) not visible in production system for same user ( i.e. having similar authorizations )
the path is : SAP Menu --> Accounting --> Financial Supply Chain Management --> Cash and Liquidity Management
Our system is : ECC 6.0
Every user should be able to view SAP standard menu inspite of the fact that he might have authorization to certain transactions only; hence this should not be an authorization issue ( as per my view ).
So can anybody help/ suggest in this regard?
Thanks.
Regards,
Shamish

Hi Alex,
I had that option in front of me ( we actually tried it also with no result ). But before that I would like to know, why this might have happened. Why there is difference between standard menu on both servers?
Regards,
Shamish

Change on process chain not visible in display mode after transport

All,
We have changed a process chain where message notification was active in development.
We have deleted the notification and created a transport. This has been released and implemented into the QA system without a problem.
When displaying the new process chain in QA the change was not visible. But in change mode it is.
Can anyone tell us what might be a cause/solution for this? Also for future changes.
Gui error??
Thanks in advance.

hi,
Try activating the PC again in the QA.
if still it does reflect the message notification, then try creating the request again
in DEV and transport.
make sure you r out of the Process chains in DEV nad QA when transport happens.
This is just a practice.
Regards,
Dhanya.

Navigation bar not visible in edit mode

Hi,
is there somebody who can help me out of this: in edit mode my navigation bar is not visible, however once the site is uploaded the bar is visible. During edit mode i can only see a big dot which positioned in the navigation bar text box.
I am using the latest version of iweb and OS 10.6.8
looking forward to any good sugestions. Thanks.

That is so unusual. Usually it's the other way around: looks OK in iWeb but not after publication.
Log into another user account on your Mac, launch iWeb, create an new test site and see if the navbar is visible. If it isn't then the application seems to be the culprit and a reinstall of iWeb seems warranted. To do so you'll have to delete the current application and all files with "iWeb" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iWeb from the disk it came on originally and apply all necesary updaters.

Newly created form field does not appear in Preview mode, only edit.

Created two fields on this page. Only this first one shows in Preview mode. I saved the doc before hitting preview.

What happens if you exit forms editing mode? Is the field set to hidden?

Slideshow not visible in preview or when published

Hello, I am trying to add a slideshow to my page and it is visible in design mode but not in preview or when I publish. Page URL is http://thepeculiarpalette.businesscatalyst.com/artplates.html
Here is a screenshot of where it is supposed to be located. The header text isn't visible either. Can you please tell me what I am doing wrong?

Hi
I checked the site , header text shows up on page and the slideshow thumbnails also shows up, but the image on page does not shows up.
Tried to check and can see that image frame which is inserted in head section stretches down the page and thus overlaps with the image on page , try to lower down the size of image frame that is used in header section so that it does no overlaps with the hero image on page.
Thanks,
Sanjit

Crystal Report menu-item not visible on SAP menu of client

SAP 2007A SP:00 PL:38
Crystal Report 2008 (on start menu)
Crystal Report 2.0.0.6
1. Installed CR 2008 on server and it runs fine both from Start menu and from within SAP menu. SAP also shows Crystal Reports menu item and Crystal Admin.
2. Installed Crystal Report on one of the clients and it works fine in same way.
3. On 2nd client, SAP Crystal Runtime installed as follows: SAPCrystalSetup.exe run first, then DotNetFramework3.5 run - it resulted in "Setup error". Then run the CRRuntime_12_0_mlb.exe without errors. Then installed CR designer, On this client, Crystal Reports 2008 opens fine from Start menu. However from within SAP, it does not show Crystal Reports Admin nor the Crystal Reports menu-item.
a) This user has "automatic" start of Crystal Reports 2.0.0.6 in Add-on Administration.
b) However, in Add-on Manager, Crystal Report does not show at all.
c) In Add-Remove programs, I see that Microsoft .Net Framework 3.5 SP1 exists on the client.
d) OS is Microsoft XP.
How could I see Crystal Administration or 'Crystal Reports' menu-item from within SAP on this client?
Thanks, Ajay Audich

Hi,
1) On Add-Remove Programs on the client, I see the following:
Crystal Reports 2008 Runtime
Crystal Reports Basic 2008 for SAP Business One
Microsoft.NET Framework 1
Microsoft.NET Framework 2.0 Service Pack 2
Microsoft.NET Framework 3.0 Service Pack 2
Microsoft.NET Framework 3.5 SP1
SAP Business One Crystal Reports 2.0.0.6
2) The settings are:
Company Preferences for Crystal Reports for SAP Business One / Version 2.0.0.6/ Default Group Automatic/ Active Yes
User Preferences Tab-User RT-Preference is set to Default.
On server, 'Installed Add-ons' tab shows Crystal Status as 'Connected'
However, on the client, Add-on manager, both "Installed Add-ons" as well as "Pending Add-ons" tabs do not show Crystal Reports row at all.
3) The user RT on the client is a super-user.
Thanks.

Spry menu bar not visible in live view

Hi everyone,
I was just working on the css for my spry menu bar and went to check it out in the live view, but it is no longer visible. I checked it out in Safari and Firefox to no avail. It looks totally fine in the design view in Dreamweaver. I'm new to web design and I have no idea what I did, but I'm really hoping someone here does! Below is the CSS.
@charset "UTF-8";
/* SpryMenuBarVertical.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, a fixed width box with no margin or padding */
ul.MenuBarVertical
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
cursor: default;
width: 8em;
color: #333;
background-color: #FFF;
vertical-align: middle;
text-align: left;
white-space: normal;
display: list-item;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1000;
/* Menu item containers, position children relative to this container and are same fixed width as parent */
ul.MenuBarVertical li
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
position: relative;
text-align: left;
cursor: pointer;
width: 8em;
background-color: #FFF;
letter-spacing: normal;
vertical-align: middle;
word-spacing: normal;
white-space: pre;
display: table-column;
height: 70px;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarVertical ul
margin: -5% 0 0 95%;
padding: 0;
list-style-type: none;
font-size: 100%;
position: absolute;
z-index: 1020;
cursor: default;
width: 8.2em;
left: -1000em;
top: 0;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarVertical ul.MenuBarSubmenuVisible
left: 0;
/* Menu item containers are same fixed width as parent */
ul.MenuBarVertical ul li
width: 8.2em;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Outermost menu container has borders on all sides */
ul.MenuBarVertical
border: 0px solid #FFF;
alignment-adjust: central;
background-color: #FFF;
margin-top: 50px;
margin-left: 50px;
/* Submenu containers have borders on all sides */
ul.MenuBarVertical ul
border: 1px solid #CCC;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarVertical a
display: block;
cursor: pointer;
background-color: #FFF;
padding: 0.5em 0.75em;
color: #333;
text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarVertical a:hover, ul.MenuBarVertical a:focus
background-color: #33C;
color: #FFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarVertical a.MenuBarItemHover, ul.MenuBarVertical a.MenuBarItemSubmenuHover, ul.MenuBarVertical a.MenuBarSubmenuVisible
background-color: #33C;
color: #FFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarVertical a.MenuBarItemSubmenu
background-image: url(SpryMenuBarRight.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarVertical a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarRightHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarVertical iframe
position: absolute;
z-index: 1010;
filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarVertical li.MenuBarItemIE
display: inline;
f\loat: left;
background: #FFF;

My guess is that you have a dark background in which case the menu items will not be seen.
I suggest you have a look here first http://www.dwcourse.com/dreamweaver/ten-commandments-spry-menubars.php#one, then resurrect the original SpryMenuBarVertical.css and change as required.
Gramps

OEM - Data Guard Menu is not visible

Hello guys,
at the moment i am trying to install and configure Oracle Dataguard in our test environment.
Because of some easy managing of Data Guard i want to use the OEM Data Guard interface in the OEM. So i configured my local OEM on my test database and started it.
I login with SYSDBA privileges to the local OEM on my test server, but i don't see any Data Guard menu.
I go to Maintenance -> High Availability and the last point that i can see is "File System Backup and Restore" .. but the help of the OEM says:
File System Backup and Restore -- Backup or restore the database file system.
Data Guard -- Use Data Guard to protect critical data by automating the creation, management, and monitoring aspects of standby database environments. I don't see any Data Guard menu point in my OEM.
The documentation of the Data Guard .. says the same:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14230/install.htm#BABFHFEI
To use DGMGRL, the best practice is to install the Oracle Enterprise Edition or Personal Edition database software on each location you expect to include in broker configurations. You must install Oracle Enterprise Manager 10g Grid Control to use the Enterprise Manager Web-based user interface for Data Guard.
The DGMGRL is available. Am i doing something wrong?
UPDATE!!: The problem is solved.. i justed mixed up the ports between database and grid control :-\ .. it is working now
Regards
Stefan

Hi Joshi,
Check ur detailed navigation is open or closed
goto cont adminportal content-- go to ur default frame work page-- desktop innerpage-- open --- see detailed navigation iview is checked for visible or not
hope this helps u
Regards
Krishna.

First tab of Lable Based Menu is not visible in Preview Mode

Similar Messages

Maybe you are looking for