Fix Pack 3.3 Question/ Problem
Install Fix Pack 3.3 this week. Built a new model and everything worked fine. I opened a model built in a prior version. The model opened fine.
When I went to preview the model, I the following error:
Microsoft Visual Basic - File Not Found
Then a second error message:
An error occurred during SWF generation. For more information contact the file creator or your system administrator
Any idea on what might be happening and how I can get these to work with Fix Pack 3.3?
Stratos,
I appreciate very much your help here. Since I do not see the Fix Pack 3.3 in the installed programs, it looks like I'll need to take your advice on reinstalling. Could you please confirm for me the following before I go forward:
I'll go to the Downloads page of SAP and re-download the Service Pack 3 ("Xcelsius Enterprise 2008 Service Pack 3"). I'll then uninstall Xcelsius 2008 from my PC and install the Service Pack 3 download.
Please let me know if my above is correct.
Thanks!
Similar Messages
-
I've just loaded Fix Pack 3.3 and when I attempt to open an existing Dashboard file, Excel opens and I receive the following message: "Microsoft Visual Basic File not found". I then get the following message from Xcelsius: "An error occurred while communication with Microsoft Excel. To prevent further data corruption, Xcelsius must close". I'm running Xcelsius Engage on Windows XP.
Anyone else have any ideas or experiencing similar problems?Stratos,
I appreciate very much your help here. Since I do not see the Fix Pack 3.3 in the installed programs, it looks like I'll need to take your advice on reinstalling. Could you please confirm for me the following before I go forward:
I'll go to the Downloads page of SAP and re-download the Service Pack 3 ("Xcelsius Enterprise 2008 Service Pack 3"). I'll then uninstall Xcelsius 2008 from my PC and install the Service Pack 3 download.
Please let me know if my above is correct.
Thanks! -
Help: Problems accessing XML file in WebSphere 3.5 Fix Pack 4 on Solaris
We are having an emergent issue with WebSphere 3. 5 Fix Pack 4 on Solaris 2.6: The WAR file we deployed fails with runtime exception due to the inability
to access a local resource(XML file) in the converted WAR file's web directory.
The way we access this XML file is as follows:
ServletContext theCon = getServletContext();
URL u = theCon.getResource ("/web/test.xml");
String newPath = u.toExternalForm ();
InputStream is = new URL (newPath).openStream();
The InputStream returned from the URL object is NULL.
After checked the URL's externalForm string, we noticed that its protocol part is "classloader", e.g. the whole URL string is like "classloader:/opt/...../web/test.xml". However, if we replaced "classloader" with "file", the problem disappeared and the XML file can be read without error.
Anybody know why "classloader:" in the URL string cause this problem, and what is the solution without changing the URL string?
Thanks a lot!Hi,
Can you try to replace the two last lines with:InputStream is = new FileInputStream (u.getFile());Hope this helps,
Kurt. -
BO XIR 3.1 Edge- Problem installing Fix Pack 1.1
I am trying to install Fix Pack 1.1 for XIR3.1 Edge.
The BO installation is installed on c:\businessobjects
When asked for Server Instance and Service Name:
SERVER INSTANCE = Server name
SERVICE NAME = defaults to TomCat55
However, I get this error. Where am I going wrong?
Application server instance not detected in directory '$/conf/Catalina'.Hi Joe,
try localhost as server name.
Regards,
Stratos -
corrupt files notice when in process of installing the fix pack 3.1?
When you download the file, there will be a file size shown. When you have downloaded the file, check the file size. If they're not identical, then the file isn't downloaded properly.
If your downloads keep finishing prematurely, try using the SAP download manager.
If you download is complete (the file size is right) please post back with the version. -
Problem after installing upgrade to Fix Pack 2
Hi,
I have a formula which is performing differently after installing Fix Pack 2. The formula is being used within the spreadsheet component and I've selected the ignore blank cells in values on the behavior tab.
The formula works correctly with Fix Pack 1, but not with Fix Pack 2.
In Fix Pack 1, the spreadsheet component in design mode correctly displays one row of data (headers).
In Fix Pack 2, the spreadsheet component in design mode incorrectly displays multiple rows (this should still only show the header row).
My formula is:
IF(ISERROR(FIND($A$2,D23,1)),D23,REPLACE(D23,FIND($A$2,D23,1),1," "))
Basically what this formula does is replace a CR/LF in a field with a space.
We backed out Fix Pack 2, and the formula works correctly.
Anyone have any ideas on why Fix Pack 2 is causing this formula to behave differently?
Thanks.Hi Jim,
Could you install FP3 for Xcelsius and see if this works fine?
Also try to create a sample model in FP2 with the similar formula and check if it works.Let me know what happens if you install FP3.
Thanks,
Amit. -
Does any subsequent FP (in a series of FPs) address all previous FPs?
(ie: Will FP 4.7 address 4.6, 4.5, etc? )Yes, all Fix Packs and Service Packs are cumulative.
-
Crystal 2008 Fix Pack 1.2 Changes?
I have 2 questions.
1) What has changed in Crystal Reports Fix Pack 1.2 (Posted 01-13-2009)?
2) Is there a mailing list or RSS feed or something I can sign up to so that I am notified when a new HotFix / Service Pack is released for Crystal Reports 2008?Naveen,
I did as you instructed but my problem is still unresolved...
I downloaded 'cr2008sp1_fp12.exe' from the [Business Objects Download Page|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
I ran the application and browsed to where the files were extracted in my case (C:\Documents and Settings\Administrator\Local Settings\Temp\package)
After investigating all the files I was unable to find a 'ReadMe' file.
Here is a summary of what I did find:
1) CrystalReports.msp
2) license_xx.xxx (License files in many different languages and in TXT, RTF and PDF)
3) What appears to be 'localized' versions of the same 'CrystalReports.msp' file
If anyone can give me a specific list of what is changed I would really appreciate it. -
BOXI 3.1 Fix Pack 1.3
We had BOXI R2 SP2 installed and created a number of web intelligence reports. We then started using Xcelsius 2008 and found that there is a 'refresh' problem with Xcelsius that is apparently resolved by upgrading to BOXI 3.1.Therefore we have attempted to upgrade to BOXI 3.1 and have installed fix pack 1.3.
We are now encountering difficulties with the web intelligence reports we set up using XI R2 as it appears version 3.1 generates the sql in a different way from version 2. So I have two questions :
-Does BOXI 3.1 fix pack 1.3 include the fixes in fix packs 1.1 &1.2 (I cannot find the issues fixed document on the website)?
- Am I able to use web intelligence reports created in BOXI R2 in BOXI R3.1 ? If so, do I have to change some paramenters (previously we had to change the SQLSRV.PRM file to get the outer joins to work in BOXI R2)?
Regards
JasonYes to first question. All Fix Packs and Service packs are commulative.
I'd say yes to the second one. But I guess it'll be dependent on the report design. If your reports no longer works - open an Incident, so it can be investigated. -
Having Error 2902 when installing BO 3.1 fix packs
Hi,
After installing BO 3.1 I started installing fix packs 1.1 - 1.2 and 1.3. However, it is giving a fatal error when installing 1.2 and the install rolls back.
The Error says: "Error 2902. Operation ixfAssemblyCopy called out of sequence"
Any need appreciated
Thank you
MetinYep, I see the FP1.3 there.
I have one last question:
In the link you sent, it says: The 2902 errors generally point to authoring issues. One case has been identified as authoring error wherein the win32 sxs components do not include a key path. For this case, adding a key path corrects the problem."
We always work remotely on the servers. Should I physically go and hook a Keyboard (or keypad) to the server to get rid of this error? Or is there any other solution?
Thank you
Metin -
Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.
Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
KumarWilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar -
I don't know of there is anyone than can fix this age old Apple problem. Does anyone know how to retrieve apps under an old Apple ID when the email used for that account no longer exists & I can't remember the password? After speaking with Apple Acct. Security, I got the security Q right but my birthday was wrong! They wanted the serial number from my phone that was 3 iPhones ago! Seriously??!!
Any updated way to work around this? No Apple people can correct it.
Thanks,
JoeYou need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986) -
Question / problems with the Toshiba TV 40TL938 (40TL938F)
Hi everybody,
I bought the Toshiba TV 40TL938 french version ( 40TL938F ), in an online store.
I have a few question / problem, and i hope you could help me.
- when i play MKV vido files via USB, integrated subtitles works well but for me they are too small, too thin and too white. Can i make them biger, larger and with a black shadow around it ? if yes, how could i do this ?
- when i play MKV vido files via DLNA (with XBMC), there is no subtitles anymore. Whose fault is it ? my TV ? XBMC ? do you how i can fix this ?
- does anybody know if DTS will be supported sooner or later on 2012 toshiba TV models such as my 40TL938
Thank you very much by advance for your help !
Backslash
French user of a beautiful Full HD 3D 40 inches toshiba LED TV :)> {quote:title=TomDexter wrote:}{quote}
> > when i play MKV vido files via USB, integrated subtitles works well but for me they are too small, too thin and too white. Can i make them biger, larger and with a black shadow around it ? if yes, how could i do this ?
>
> User manual page 76:
> http://www.toshiba-om.net/LCD/PDF/English/TL938-4046-English.pdf
> You will need to check the option: +Subtitle Type+
Hi !
Thank you for your answer,
I saw this but there is no way to change the subtitle setting.
In "subtitle type" the only thing i can do is to swich from "normal" to "deaf and hearing impaired" ("sourd et malentendant" in french).
So i guess i will have to get used to it
Anyway, thank you for your help !
> {quote:title=donhe7 wrote:}{quote}
> BACKSLASH ASKS " does anybody know if DTS will be supported sooner or later on 2012 toshiba TV models such as my 40TL938?"
>
> Please excuse my ignorance, but what is "DTS"???
>
> donhe7
DTS is an audio format, such as AC3 or mp4. This TV doesn't support DTS, so when i play movie (such as MKV file) with audio in DTS, there is no sound (but the video is ok). -
We receive the following message when we try to install fix packs 4.1 and 4.2. The fix pack will correct issues identified with the installation of service pack 4. The error message states: "Some installation files are corrupt. Please download a fresh copy and retry the installation".
I did a second download and receive the same error message. Has anyone else run into this problem while downloading the identified fix packs (4.1 & 4.2)?
DooleyAre you downloading from the new SAP site or the older BO ESD site located at http://businessobjects.subscribenet.com?
I know on the ESD site there is a link for "more details". This will bring up a page with the md5 sum of the file.
After downloading to your workstation you need to run a md5sum program against the downloaded file and make certain that the md5 sum matches what is listed on the ESD site. If it does not match, then your downloaded file is corrupted.
If you search the internet there are many free md5sum programs. It is usually already included on most unix and linux platforms with the command md5sum.
Are you downloading windows or unix patches?
If unix, do not use a windows zip utility. Always transfer the files to your unix server via binary mode ftp and then unzip/untar using unix utilities.
--Jack -
Looking for evaluation of BOE XI 3.1 Fix Pack 2.2 Upgrade Experience
Hello,
I have a customer interested in upgrading from BOE XI 3.1 Fix Pack 1.2 to Fix Pack 2.2 which has recently been released and expectedly improves the SAP BW integration. The customer primarily uses Webi and Xcelsius. Prior to upgrading to Fix Pack 2.2, they would like to know of other upgrade experiences in terms of stability, regression testing, issues, new functionality, etc.
If you have any such experience, please let me know your feedback by responding to this thread. Kindly include which Fix Pack you were on prior to the upgrade in your response.
Best regards,
RenatoHi Renato,
Looks like you have posted this question in wrong forum Please post it to "Business Object" forum for quick replies.
Hope this helps.
Regards,
Rashmi
Maybe you are looking for
-
How to add selected values from table(selected using checkbox)to table?
Hi All, i have created simple page with search panel with table in table i have created one column as check box for selecting. here what my requirement is i need to do search multiple times to add some roles to from some different categories.here whe
-
Apple DVI to ADC Adapter - DID NOT WORK !!!!
I have a PowerMac G4 Model M5183 and I wanted to connect it to a 20" Apple Cinema Display that I got. Because the display output on the computer is different than the monitor, I bought the Apple DVI to ADC Adapter that everyone talks about on the sup
-
I bought a brand new mac and follow through setting up process with my apple id but when I open App Store I don't see lion into the purchases list. why?
-
Axis - Premature end of file (Desperate!)
Hello guys, I am developing a simple XMLSignature (using Apache's XML-Sec v1.2.1) web service on a Tomcat v5.5.12 / Axis v1.3 installation (happyaxis.jsp is totally happy). The service performs signing and verification of Documents. The service call
-
in table mintaince generaton when we give values why we click 2 times in local objects?plzz tell