[FIXED]ExternalInterfce.call not being invoked in IE7

My Flex UI is working perfectly in FF3. I am getting a
strange problem in IE7. When I clear out all browsing history and
visit my application, it works fine. When I reload the page
containing the SWF of my flex app, or if I logout and log into my
app again, the ExternalInterface.call invocation does not seem to
be happening.
I have looked for answers on various fora. I am using SWF
embedding code generated by the flex builder and it is correctly
setting the id of the SWF. I am running out of leads on what to try
next.
This has got to be a history-related issue. Anybody else seen
this?
Thanks.
-Raj

My observation was that the ExternalInterface call to my JS
function was vanishing into the ether.
I moved the SWF embedding code to the bottom of the page to
ensure that IE will initialize all other tags in the page before it
started the flash player. This seems to have done the
trick!!

Similar Messages

  • Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

    Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

    We are trying to determine why alert boxes are not modal
    The fix states it's for Firefox 2.0 - 3.7a1pre
    We are using 3.0.6 not the current version of 3.6.13.
    Add-on release notes 2.16.1
    https://addons.mozilla.org/en-US/firefox/addon/foxyproxy-standard/versions/
    Repeating 2.16 release notes since 2.16 was not made available for more than a couple of hours
    Fixed bug whereby some alert boxes weren't properly parented/owned. This led to some alerts not being properly modal
    with respect to the window/dialog that issued the alert.

  • VOIP calls not being forwarded from GW to GK and visa versa

    I have a VOIP network setup in place using 2691 routers. i have a siemens PBX connected to the 2691 routers using an E1 controller (running QSIG), my WAN interface between the two sides is an ATM interface. when i do a csim start from one router to the extension on the other side the call goes through and the phone rings. However, when i actually dial from one extension to the other, the call is not being forwarded. and what happens is that i hear the dial tone again on the phone im dialing from.
    I have taken some debugs but still could pin point the problem, even though in the ccapi inout debug i found that when it tries to look for a node, it doesnt find it.
    I have attached the configuration for both sides. Along with the debug from one of the sites.
    There are a couple of GW's associated with the GK.
    The ones im concerned about are Mussalla_GW & GK-HO.
    Thank You in advance
    Mouhannad

    Try this:
    dial-peer voice 2 pots
    direct-inward-dial
    Without this command the router will not collect the digits coming across the PRI.
    Please rate helpful posts.

  • Calls not being recorded with AQM 8.5

    We have installed AQM 8.5 with UCCX 8.5 and CCM 8.6 but the agent calls (voice & screenshots) are not being recorded on their desktops, AQM is sync with UCCX and have verified with manual sync and found no issue. Clint applications ( calabrio plug ins & desktop agent recording service) has been installed on the agent machine. The agent machine is daisy chained with a 7945 phone. On AQM server configurations done as per administration guide. Is there any service or application which needs to be started along with CAD for recording.

    Actaully it was Java 7 where the page was greyed out, i downgraded it to version 6 update 20 but now when i click on validate pc i have error on page. This was happening with windows 7.
    I installed jre ver 6 update 20 on windows XP, i was able to validate the pc settings successfully and login but now i have recording playing error, the screen shot is given for reference

  • Calls not being forwarded to skype number

    Hello, I have had my Skype number for 2 years now and never had a problem.However since end of November 2012 calls from the USA are no longer being forwarded to my cellphone in Germany.No , I have not changed my settings , why should I , since it has been working perfectly all these years.There is no way to get help from Skype and I am extremely frustrated with their service.It sucks to pay for a product that won´t work.I am a dissatisfied customer and will leave them if they do not straighten out their stuff.

    watsource wrote:
    Hello, I have been a SKYPE user for the past 5 years and everything has been working fine.  Recently, calls from telephones to my skype number are not being forwarded to my designated number.  I've tried to turn off and on forwarding feature but still not working. Calls from other skype contacts using skype calling me are forwarded but not from any landline or mobile contacts calling my skype number.
    What happens when you call your Online Number? 
    If calls directly from other Skype users are being forwarded to your designated number, but not the calls made to your Online Number, call-forwarding appears to be working.  You may have a different issue related to your Online Number. Has it expired?  If you click on "Account" at the top of this page, you can verify that your Online Number is still in effect by clicking on "Online Number" once you log into your Skype account through that link.
    If your Online Number is still in effect, here's something else to check.  From a computer (not the Skype app on a mobile phone or other device), can you verify the Privacy setting for Online Numbers?  It should be set to allow calls from anywhere.  If not, it is possible that this setting was changed, preventing you from getting calls on the Online Number. 
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • CommandLink action not being invoked

    HI:
    I have a page with panelGrid, which has three inputText and one selectOneMenu, all of which have a validator ( a method in the backing bean).
    All these are followed by a commandLink button with a 'action' method in the same backing bean.
    Problem is when the link is submitted the action method does not get invoked. I placed debug messages and can see that the validator methods are entered but the action method never gets invoked. There are no error messages either.
    Any thoughts ?

    I found a work around. At least everything is working now. I have to yet test out the entire functionality of my application but here is what I did.
    Thanks to the example in the book
    JavaServer Faces
    By Hans Bergsten
    In my main layout page
    <%@ taglib prefix="f" uri="/WEB-INF/jsf_core.tld" %>
    <%@ taglib prefix="h" uri="/WEB-INF/html_basic.tld" %>
    <f:view>
    <html>
    <h:form>
    <%@ include file="../../page1.jspf" %>
    </h:form>
    <h:form>
    <%@ include file="../../page2.jspf" %>
    </h:form>
    <h:form>
    <%@ include file="page3.jspf" %>
    </h:form>
    </html>
    </f:view>

  • Authenticator not being invoked - NTLM authentication against IIS 6.0 !!

    Hi Folks,
    I am trying to access Microsoft Reporting Service running on IIS 6.0 through a Web Proxy (a simple application running in an App Server) using the NTLM authentication. This is what i am doing
    Authenticator.setDefault(new ReportAuthenticator());
    HttpURLConnection urlConnection = (HttpURLConnection) url.openConnection();.
    As i understand, the authentication is to magically work with the IIS Server requesting my web proxy for the credentials on connect whcih should involke the Authenticaor class.
    Howver this is not happening at the moment. The authenticator object never gets invoked and even then my web proxy is being able to chat to IIS. The Sun app server hosting my web proxy is somehow passing my windows credentials to IIS and since my account has sufficient previliges on IIS, i am able to get through the initial connection.
    When i debug the urlConnection object, i can see that the connection recognises that this is an NTLM authentication but is obviously not using the Authenticator credentials.
    Is the Authenticator object meant to be invoked automatically or do i need to set some header information in the urlConnection??
    Any help is greatly appreciated.
    P.S: I am using JDK 1.5, IIS 6.0, Sun App Server 9.0 (platform edition)
    best regards
    Dushy

    Hi,
    we had the same problem, but we got support
    from readme.txt
    Bug#: 6789020
    Agent type: All Agents
    Description: In CDSSO mode non enforced POST requests cannot be accessed
    Bug#: 6736820
    Agent type: IIS 6 Agent
    Description: IIS 6 agent doesn't work properly with ASP pages in CDSSO mode
    Both bugs should be fixed in this version:
    Sun Java System Web Agents 2.2-02 hotpatch2

  • Plsql notify procedure not being invoked

    I have defined a persistent queue of RAW with multiple consumer set to false. I have also defined and registered a procedure to be called when a message is enqueued. I have assumed that I only need to call DBMS_AQ.REGISTER to enable the callback to be envoked. i.e. I have not used the subscriber interface to subscript to the queue because I need not do so.
    Am I incorrect in assuming that I need not use the subscriber interface when the behavior I desire is for the notify procedure to be called when a message is enqueued.

    Hi
    If you are using single consumer and registering for notification as anonymous you may face problem but if you use multiple consumer and subscribe using an agent and register for notification using that subscriber it is bound to work. Just try once.
    Regards,
    Sanjeev.

  • Calls not being directed tomy System Call Handler

    I built a small auto attendant for an acquisition group of users moving to our head office, there are two toll free numbers as well as 4 DIDs, the carrier began forwarding these on move day to the pilot number of my AA.
    The issue is that the toll free numbers work but the DIDs do not, they are routing to the UC default opening greeting for some reason rather than my AA call handler.
    It's as though for some reason call manager is sending something different for these DIDs as opposed to the TFs and the UC doesn't know what to do with them so it sends to the default greeting.
    Any ideas as to what may be happening would be greatly appreciated.
    Regards,
    Andrew Bardowell
    Thomson Reuters

    Not to worry everyone problem solved, apologies for this time waster.
    The DIDs were forwarded as redirecting numbers instead of sending without as with the toll free numbers even though I specifically asked the carrier to check this on cut over night.
    Consequently when the toll free numbers come in they work correctly while the DIDs do not. The TFs because the tech who worked on those programmed them to send just the called number (caller ID) and the calling number.
    The tech working the DIDs sent a redirecting number as well (the original DID) which confused Unity Connection.

  • A possible fix to messages not being downloaded from the server?

    there is a previous post about this that has been archived with no solution. i googled this problem and found only a bunch of people saying "yeah, i have this problem too". so i'm posting this to see if my theory helps anyone.
    the error on my new 3g iphone read "the message has now been downloaded from the server" after i set my exchange account to push emails to my phone. so i checked my calendar to see if that synced up. i noticed that my date was all wrong. so i went in to general settings and fixed the date. once i did that i was able to read all my emails from my phone.
    to test that i set the date to be a year from now and i got the same error. i changed the date back to the correct day, restarted my phone and i could download all my messages once again.
    my theory is that typically servers do not like a dissonance like that between it and the device it syncs to. could anyone out there with the same issue confirm or deny this possible fix?

    there is a previous post about this that has been archived with no solution. i googled this problem and found only a bunch of people saying "yeah, i have this problem too". so i'm posting this to see if my theory helps anyone.
    the error on my new 3g iphone read "the message has now been downloaded from the server" after i set my exchange account to push emails to my phone. so i checked my calendar to see if that synced up. i noticed that my date was all wrong. so i went in to general settings and fixed the date. once i did that i was able to read all my emails from my phone.
    to test that i set the date to be a year from now and i got the same error. i changed the date back to the correct day, restarted my phone and i could download all my messages once again.
    my theory is that typically servers do not like a dissonance like that between it and the device it syncs to. could anyone out there with the same issue confirm or deny this possible fix?

  • Anyone know how to fix problem of not being able to import RAW files of Nikon D800 to Lightroom 5.2?

    Hi there, am failing miserably to import NIKON D800 RAW files into Lightroom, have updated to version 5.2 which Adobe website says is compatible, but still no luck. Can import PDF files of Nikon D800, and my RAW files are fully accessible via Nikon proprietary software such as ViewNX2 and Capture NX2. Have Microsoft OS Windows 7 (if that helps..). Anyone any idea how to fix this problem? Grateful for any ideas, Ruud

    Dear Jim, you have set me on the right track, thanks! I have updated my Nikon View NX 2 software (which includes the transfer software from camera to hard disk) and this has done the trick. Many thanks, also to Keith for showing interest in my problem. Downside remains that the files previously loaded with the old software remain 'un-importable', so if anyone still has a good tip how to try and correct that...
    .. all ideas are welcome!!
    But as said, many thanks for helping me solve the issue for future downloads
    Ruud

  • Thought Firefox upgrade would fix problem of not being able to download YouTube videos. It did not. May I suggest that you use Explorer instead. Firefox live chat is not working either.

    Firefox and YouTube do not work well together. USE EXPLORER INSTEAD to download videos.

    Carolyn:
    I just now did exactly as you recommended. Result? No change.
    Even after trashing the files and restarting and everything else, the Activity Window and YouTube behave exactly as they did before.
    (I had actually previously tried something very similar to your recommendation, and it didn't have any effect then either.)
    In case it's helpful, here's an example of what one of the mystery components that load endlessly in the Activity Window is listed as:
    http://s.youtube.com/s?rendering=software&lact=102489&decoding=&rt=112.382&et=11 0.829&tsphab=1&st=69.939&tspne=0&tspfdt=262&nsiabblmin=62945.000&nsidf=2&tabsb=1 &ad_flags=0&h=360&nsiabblmean=72646.865&md=1&docid=zPxFu7taftE&bc=15194849&csipt =watch5ad&ad_event=3&el=detailpage&hasstoryboard=1&vid=72A5TVVpDgRoXDV3HvMeKPjLx BFdU61DC&fmt=34&cr=US&sd=BD075E8E6HH1336502192683396&vtmp=1&nsiabblmax=79054.000 &hl=en_US&ns=yt&nsivbblmax=774478.000&referrer=None&sidx=0&hbd=7790924&w=480&hbt =2.751&cid=6&sendtmp=1&sst=0&cfps=25.974025974025974&screenw=1440&mt=0.6&vq=auto &playerw=640&playerh=390&slots=sst~0;sidx~0;at~2_3&scoville=1&at=2_3&volume=100& art=1.842&mos=0&plid=AAS_iqoqfi0mjNc0&fs=0&nsivbblc=208&nsivbblmin=561638.000&bd =931267&allowed=1_1,1_3,2_1,2_3&bt=7.441&fvid=bNz97ILtwqc&screenh=900&len=127.92 &vw=480&nsivbblmean=668895.024&nsiabblc=208&vh=360&fexp=912001,914050,913539,919 306,907217,901802,906507
    And here's one of the 1.7MB components:
    http://o-o.preferred.comcast-lax1.v11.lscache8.c.youtube.com/videoplayback?range =1781760-3563519&expire=1336524839&id=ccfc45bbbb5a7ed1&burst=40&cm2=0&sver=3&upn =I_VxE0Lmh4Y&keepalive=yes&ipbits=8&algorithm=throttle-factor&itag=34&sparams=al gorithm%2Cburst%2Ccp%2Cfactor%2Cid%2Cip%2Cipbits%2Citag%2Csource%2Cupn%2Cexpire& source=youtube&signature=6F9B5B2CA58ACBA6AFE02FB8A54F1F74EE2B0F16.8E421BC37C3019 E806C22CF3E8866847D033565C&factor=1.25&ip=71.0.0.0&cp=U0hSS1VNUl9IU0NOMl9NR1ZJOm lxNTVmbm1vcDlO&key=yt1&fexp=912001%2C914050%2C901802%2C906507%2C907217%2C919306% 2C913539

  • Plant Maintenance Schedule Calls not creating Maintenance Order

    Hi,
    I have created a maintenance plan that is schduled on a weekly basis. This worked fine initially but now calls are not being generated and therefore no orders are also being generated. The process I used is:
    1. Create Equipment
    2. Create Task List
    3. Create Maintenance Item
    4. Create Maintenance Plan
    5. Schedule Maintenance Plan
    Can you help?
    Also can you tell me which program you use to create orders for an entire maintenance planning plant, I know IP10 can be used for maintenance plans? For example you schedule your maintenance plans but I assume a periodic job must run to actually create the orders

    Hi Gary,
    I had an issue with calls not being generated and was browsing similar issues when I came across yours. I note that you also asked how you could create orders for a whole maintenance planning plant.
    This can be done by using the sort field on a maintenance plan. You need to define sort fields (config) for the maintenance plans for each of the plants required and then insert them on each plan. You can then use the sort field as a selection when scheduling.
    Hope this helps.
    John

  • MethodBinding from commandLink not being called

    Hello,
    I am building a dynamic datatable and everything is being rendered fine. However, now I want to implement row selection on the table and am doing so by rendering a commandLink on each row that the user can click to select the row. I would like to bind this to an action method in my bean and have so far been unable to invoke the action method when I click on the link. Here is my code:
    UICommand comm = new UICommand();
    MethodBinding mbButton = app.createMethodBinding("#{myBB.buildModel}", null);
    comm.setAction(mbButton);
    code]
    And my backing bean is defined in faces-config as myBB.  In that backing bean, I have:      public String buildModel() {
         logger.info("BuildModel invoked");
         return "stay";
    But buildModel is not being called at all when I click the link on the page. What am I missing?

    Figured it out.
    You need to set an ID for each comm, also. Adding a call to comm.setId(<unique ID>) fixed the problem.

  • How do I tell Apple to fix their software like apps that play sound even though the sound is turned off and not being able to disable features you hate like game center

    Apple is suppose to be the pinnacle of usability and, yet, I want to throw my new IPhone 4s as far as I can and watch is smash into a million pieces on concrete. Seriously, I've already got three things that irritate the **** out of me. First, there are Apple apps that insist on playing sound even though the sound is turned off. If I flick a switch to turn the sound off, I want the sound off!!!! Second, if I do not want a totally unnecessary feature like Game Center, I should be able to disable it. I completed most of the Angry Bird levels with 2 or 3 stars and now I have to start over from square one. Maybe, this happened when I upgraded to the 4s but it sure seemed to happen when I joined Game Center. Tomorrow, I am going to reset my 4s to factory defaults to try to get rid of my Game Center account. I don't want Game Center! I do need Game Center! I hate Game Center! Finally, I had an alarm go off to wake me up and there was a Snooze button but no button to turn the alarm off. I flicked the slider to access the main screen expecting to see something to turn the alarm off but there was nothing. The alarm just kept alarming. I had to warm boot my IPhone to shut the alarm off! Really, Apple!!!!

    The sound is turned off. Only, some Apple apps like YouTube and Siri make sound when the sound is turned off. It is very embarrassing when this happens at work. My question was how do I tell Apple to fix this?
    Turning off game center does not work. The games just prompt me to sign in when they are started.I have tried everything I can find online to stop this behavior. It is annoying and should not happen. My question was how do I tell Apple to fix this?
    The alarm went off. There was a green thing that looked like a button but pressing it did nothing. There was a red button that said snooze. I did not want to snooze. I wanted to turn the alarm off. I slid the bar to unlock the phone and there were no running apps with a button to press. The alarm just keep running. I have not had this problem since it first occurred. The alarm now shuts off when I just unlock the phone. It may have happened because I had another alarm app running. The two may have interfered with each other. I would like to tell Apple about it.
    It also annoys me that the button that closes apps leaves the phone app running. If I press on a number at 6:00 AM to get information about who called me, the phone automatically dials the person back and my natural reaction is to press on the button to close the phone app but the phone keeps dialing this person at 6:00 AM. It is a bad design. I would like to tell Apple about it.
    Finally, I looked all over Apple's site to try to find someplace I could send them a polite message to let them know that I was not happy with these "features" but could not find anything. It is extremely frustrating to have issues with a product and not being able to tell the manufacturer about it. So, you grow up!.
    When trying to fix the Game Center issue, I saw a link someone posted to report issues with the IPad to Apple. The answer I am looking for is where is the link to report issues with the IPhone.

Maybe you are looking for