Flash Builder 4.6 differences between debug version and apk release version

I've been struggling for several days now. I have a simple swf file that just says 'hello world' on a green background. It is written in Flash 8 actionscript 2. I've used the Flash Builder actionscript mobile project and flex mobile project in both cases and I can get it to download and display quite happily in the debug version on the desktop emulator and on my ASUS eee Pad Transformer Prime using a USB cable . Thinking that all is ok I then 'export the release build' and the result is a blank white screen on my tablet.
I then did a simple Flex Project as per an adobe 'my first app' tutorial (hellow world!/Success!) and exported the release build with the same certificate I used before and it worked fine.
So after all that my question is - what could be the reason that my tablet is quite able to run a debug version of my embedded swf file but not the apk release version of it?
Any ideas?
thanks
Nick

When I run the tool I dont see flash builder as an option?

Similar Messages

Differences between PT8.51 and PT8.52 versions

Hi,
Can I get some documentation or reference URL for differences between PT8.51 and PT8.52 versions?
Thank You!
Regards
Soundappan

In addition, specially for the YouTube generation, Gray Sparling has created a great webinar on the features of PeopleTools 8.52
http://www.youtube.com/playlist?list=PL9B370AEEF80F8C10&feature=plcp
I have also written a couple of blogs on some feaures of PeopleTools 8.52
http://bloggingaboutoracleapplications.org/bi-publisher-enhancements-peopletools-852/
http://bloggingaboutoracleapplications.org/create-interactive-dashboard-interwindow-communication-iwc/
http://bloggingaboutoracleapplications.org/create-apealing-dashboards-peopletools-852/
http://bloggingaboutoracleapplications.org/peoplesoft-oracle-secure-enterprise-search-ses/
http://bloggingaboutoracleapplications.org/peopletools-852-generally/
That should keep you busy for some wile :)

What are the difference between 4.6c and 4.7 versions?

what are the difference between 4.6c and 4.7 versions?
if any please give me answer
regards
ramanji

Hi,
Upgrade SAP or Installation of SAP R/3 and ECC
What is ECC? Where to find the installation steps of ECC 5/6.0 with SQL as database and on windows platform with the steps including Solution Manager installation?
http://service.sap.com/instguides
ECC means Enterprise Central Component.
There are all the relevant installation guides. You NEED SAPNet access because without a registered and licensed SolMan installation number you will not be able to generate the SolMan key for the ECC installation.
Upgrade to 4.7
Have you gone through an upgrade to 4.7?
What are the difference or changes associated with 4.7.
If you are currently on 4.6C and are inching forward to upgrading to 4.7 then this information might be useful to you.
There is very little difference between 4.6 and 4.7, the only "steps" you should need are steps in SU25 ( skip step 1) Then go through all your role and perform a merge old new to bring in the new authorization objects
Just to forewarn you of a potential problem which have been encounter at the point of writing.
After updating/ modifying roles in step 2C, when going back into 2C to make sure all roles are now green, 70% have gone back to red!
The maintenance done is ok, but there seems to be a problem while trying to go back into the roles again to re-generate.
SAP recognizes them as needing "adjustment", so you cannot pick them up in mass generate in PFCG as they do not come in, even though the authorizations tab is red.
This problem is currently with SAP and it is confirmed that nothing have been done wrongly.
Generally, the work is quite manageable in the upgrade, but don't be surprised at how big the upgrade is when compared to upgrading from 46b to 46c.
If we have full software of 46c and 47E is it possible to upgrade 46c to 47E or there is a seperate 47E upgrade software need to be requested from SAP?
Where I can get the document with upgrade steps on the service market place?
It is of course possible and supported:
http://service.sap.com/inguides
--> SAP Components
--> SAP R/3 Enterprise
--> (choose your version)
at the bottom there is an "Upgrade guide" for Windows and Unix.
For Upgrades it is recommended to read ALL the notes mentioned in the
upgrade guide and to make sure one is using
- the correct version of the "tp" program
- the correct version of the "R3trans" program
- the correct version of the "R3up" program
All that is explained in the upgrade guide and in the corresponding notes.
If this is your first upgrade you should take a person, that has some experience on doing that for the first time.
Installation of SAP R/3
Currently we are going to install SAP on a new IBM server from the existing COMPAQ server. Where can I get the steps for that.
Configuration is :
   OS - windows 2003 server
   DB - Oracle 9i
   SAP 4.7
http://service.sap.com/instguides
--> SAP Components
--> SAP R/3 Enterprise
--> SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)
--> Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
The above url is the SAP Service Marketplace with all the information you need to install, configure and run system. You need to be a valid licensed customer with a user ID and PASSWORD to use that.
Without access you won't be able to successfully run any SAP systems because it has notes, patches etc.

Are there any functional differences between the trial and the paid version?

Are there any functional differences between the trial and the paid version for Labview 2009? Thank you.
Solved!
Go to Solution.

This outlines the limitations of the eval version of Labview: Limitations of the LabVIEW Evaluation Version
Cheers,
Misha

What is the difference between a full and a upgrade version?

When I want to buy photoshop elements 8.0 i can select a full or upgrade version, the price is alsmost thesame.
normally you would think a upgrade is just a upgrade and you can't use it if you don't already have photoshop Elements installed.
but in many online stores they only sell the upgrade version.
so that makes me believe you can buy it even tho you don't have any photoshop elements on your pc.
so what is the difference?

The only difference between the Upgrade and Full version is of the pricing. I believe right now Adobe is already offering PSE at $79 so there is no Upgrade option appearing on the website (although I am not sure about unavailability, I just stating what one of the user on the forum says).
Legally, you should be a previous customer of PSE to buy an upgrade version and I am not sure but I believe when one go for buying the Upgrade version they do need to provide the serial number of the previous verison.(not sure though)
Regards,
Ankush

Difference between 7.0 and ce7.2 versions

Hi Everybody,
Can any body tell me what is the difference between 7.0 and ce7.2
Thanks,
William

Hi William,
SAP Netweaver Portal 7.0 is the part of main release SAP NetWeaver 7.0. it has all the features like portal, Knowledge Management and Collaboration etc plus you can apply built in packages provided by SAP on ESS, MSS etc
CE 7.1 and CE 7.2 are complementary products by SAP. Their main purpose is to enable the design of composition application easier and more effective. They have various new features compared to 7.0 like AJAX, CAF, Service Repository. But CE portal is only a thin portal means it does not obsesses all the full fledged features of portal like KM, Collaboration, TREX etc.
However, using federated portal concept you can use them both together.
Thanks
Sarbjeet Singh,

Difference between the trial and the bought version?

Hi everybody!!
Okay, so I installed the trial and tried it for some days, then decided to buy Flash. It came from Amazon today and it's sitting here in its box in front of me, but I'm wondering, do I have to bother uninstalling the trial and installing the bought version, or should I just put the serial number from the one I bought, in the trial one.
Does the bought version has anything that the trial doesn't have? Or is it really just about owning the serial number, in which case all I need to do is open my box and get the number to put in my trial version?
Thanks in advance, and sorry for the noob question.

You'd probably be better off asking an Adobe customer support person. I would say uninstall the trial version and install the one you bought - event though functionally there should be no difference. In my own experience, I used the trial version and then started a subscription and it was required that I uninstall the trial and download and install the subscription. I do not know if the same applies for purchased copies, but you'll probably save yourself guessing by just unistalling the trial and installing the purchased one. Of course, the trial version provides for entering a serial number, which you could try... but if you run into an issue it might be more complicated to get it resolved, especially if you need to get support involved (best avoided).

Difference between the CD and online downloaded versions of Multisim (student version)?

I want to buy the Multisim student version and noticed that there is a CD version and also a online downloadable one. I believe the CD version cost more money. Is there a difference between the two? Are the installing processes between the two different? What is the usual process for installing the software?
Thanks, any input much appreciated!

Hi,
The version you download and what we send on CD is exactly the same. The only thing you need is a serial number to activate the software and this you should get through email.
Tien P.
National Instruments

Difference between 3.5 and 7.0 versions in BW

hai can anyone of u give the difference between BI 3.5 .and BI 7.0. relating to source system support. answers will be rewarded

Hi ,
See this very nice presentation prepared by Dr Berg on new features of BI 7.0 (these are the differences between BI 7.0 and BW 3.5):
http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
Check the release notes:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
This presentation:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
Web Blog:
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
You can also refer below posts:
Re: BW 7.0 Release
/message/1383908#1383908 [original link is broken]
Upgrade from BW 3.5 to BW 7.0 (BI 7.0)
Some features of BI 7 are
1. In Infosets now you can include Infocubes as well.
2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
3. The BI accelerator (for now only for infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
4. The monitoring has been imprvoed with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal !
5. Search functionality hass improved!! You can search any object. Not like 3.5
6. Transformations are in and routines are passe! Yess, you can always revert to the old transactions too.
this is a good PDF on Upgrade from BW 3.5 to BW 7.0
latest on upgrade tp BI7.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
http://help.sap.com/bp_epv170/EP_US/Documentation/How-to/Planning/Master_Guide_NW2004s.pdf
You can seek more information on BI 7.0 in the SAP NetWeaver2004s Ramp-Up.
/community [original link is broken]
Re: BW 7.0 Release
Re: BW 7.0 Release
Re: BW 7.0
take a look presentation
overview
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
detail
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken]
may useful .....
https://www.sdn.sap.com/irj/sdn/developerareas/bi
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Hope this helps.
Regards,
Ravikanth

Difference between Oracle 7 and later releases

Hi All,
What are the major differences in oracle 7 and lets say oracle 9i?
I have heard that version 7 did not have all the constraints. Is that true?
Naveen

You would have to look at the New Features section of the documentation to get a full list, but among the highlights of what is now available that was not in version 7:
All the object stuff
Analytic Functions
Materialized Views (AKA Snapshots)
Time Zone support
Cost Based Optimizer is hugely improved (In fact the whole SQL Engine seems faster).
Some of these came out in various version 8 releases, but to get the full list you need 9i. There is, or course much more.
In my opinion, the best reason to move off 7.x is support. Version 7 is no longer supported by Oracle. Version 8.1.7 is currently supported, but probably not for too much longer (1 -2 years?). Version 9 should be supported for some time.
If you are going to migrate anyway, you might as well go to the current release.
HTH
John

Where is the difference between Positive Liste and BP Release in SPL?

Hi Folks,
Where is the difference between setting a Business Partner on a
Positive or Negative List and release or block a business partner in SPL?
I thought that should be almost the same. Hope you can clarify it.
Thanks
Regards
Dieter

Hi Dieter,
The difference is the following:
If you put a partner on a negative or positive list it no longer gets screened. so, unless you screen the positive or negative list explicitly, the partner is no longer screened, and of course the one on the positive list is never blocked and the other one always free.
If you release a Partner the Partner then the following happens (depending on the customizing).
1. If you do not have set the memory function in the customizing then the partner stays unblocked until you launch a new screening run and, if it gets hit against a list entry, it will be blocked again
2. If you do have the Memory function ticked in the customizing then the partner gets screened and released when you do a screening run (in contrary to the positive and negative list it does get screened, but automatically released). But if there is a new or changed entry that matches with the released partner, the partner gets blocked.
Regards,
Marc

What are the major differences between hana 2013 and 2014 release

Hi Guys,
I am planning to learn sap hana and write certification exam. As sap release new platform 2014, may I know what are the major deference between 2013 and 2014 release or its just enhancement pack on top of 2013.
Please help me....thank you in advance.
Regards,
Tapas

Hi,
Good morning and greetings,
Please use the following link
http://solutionbrowser.erp.sap.fmpmedia.com
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Scripting option difference between SSMS 2012 and all previous versions

Hi,
I recently started to use SSMS 2012 (11.0.2100.60) and have seen some differences in scripting behavior of this version with previous ones (since V9). In previous versions when I want to modify a stored procedure, I right clicked on it
and selected “Modify”, and had a nice ALTER script. Now, I have a script using sp_executesql which is really not handy for SQL validation checks. After a research, I figured that I can change this behavior in the scripting options by changing the option “check
for object existence”. Great, it makes the deal!! In fact, no, because now, when I ask to script a DROP and CREATE on a table, I do not have the IF EXSIST part before the DROP anymore.
The behavior I try to have is:
When I hit “modify” on a procedure or other programmatic part, I would like to have an alter statement (DROP CREATE is fine too).
When I choose to script out an object as DROP and CREATE, I would like to have an existence check before the drop.
This is basically what SSMS did before the version 11 and was very helpful.
Regards,
Stef, DBA

Hi,
Thanks for your reply.
What do you think about the behavior?
Personally, I checked the links you sent. I cannot agree with sentences like “who cares about the outcome of the DROP when the CREATE
will still work”. When a script runs, it should run without errors, otherwise, how will you detect real issues in the noise? It’s like talking about “normal bug”. Also, “the create procedure must be in its own batch”, that’s what we did with the batch separator
GO.
A proper way to script database modifications (outside the tables itself) is to drop the object if it exists and to create it after.
Why? Because it works in any cases! Also, when I try to modify code, it’s convenient to have validation check against, and that’s why it’s convenient not to have dynamic code. It’s like coding large web sites in notepad. That’s what SSMS 10.50 and below did
perfectly.
I use script DROP CREATE capability when I prepare a migration script. Why should I write code when I have tools doing it for me? As
a DBA, I have to be critic about the script generated and to adapt it if necessary. The MODIFY option is when I debug some code. I expect the tool to validate as much mistakes as possible (yes I do mistakes and I admit it). Like I said before, it’s like working
with notepad as coding tool, it works, but who will do it?
I really would like to know if I’m alone on this position.
Just to make it easier to understand for other people, the following code is what is generated.
With SSMS 10.50.2806.0 (include IF NOT EXISTS clause = true):
Scripting a table as “DROP and CREATE”:
IF
EXISTS
(SELECT
FROM
sys.objects
WHERE
object_id
=
OBJECT_ID(N'[dbo].[ScrapTable]')
AND
type
in
(N'U'))
DROP
TABLE [dbo].[ScrapTable]
GO
CREATE
TABLE [dbo].[ScrapTable](
                [ScrapID] [int]
NOT
NULL
ON [PRIMARY]
GO
Right click on my stored procedure and hit “Modify”:
ALTER
PROCEDURE [dbo].[GetScrap]
AS
BEGIN
SET
NOCOUNT
ON;
SELECT
FROM dbo.ScrapTable
END
With SSMS 11.0.2200.60 (check for object existence = false):
Scripting a table as “DROP and CREATE”:
DROP
TABLE
[dbo].[ScrapTable]
GO
CREATE
TABLE
[dbo].[ScrapTable](
[ScrapID]
[int]
NOT
NULL
ON
[PRIMARY]
GO
Right click on my stored procedure and hit “Modify”:
ALTER
PROCEDURE
[dbo].[GetScrap]
AS
BEGIN
SET
NOCOUNT
ON;
SELECT
FROM
dbo.ScrapTable
END
With SSMS 11.0.2200.60 (check for object existence = true):
Scripting a table as “DROP and CREATE”:
IF
EXISTS
(SELECT
FROM
sys.objects
WHERE
object_id
=
OBJECT_ID(N'[dbo].[ScrapTable]')
AND
type
in
(N'U'))
DROP
TABLE
[dbo].[ScrapTable]
GO
IF
NOT
EXISTS
(SELECT
FROM
sys.objects
WHERE
object_id
=
OBJECT_ID(N'[dbo].[ScrapTable]')
AND
type
in
(N'U'))
BEGIN
CREATE
TABLE
[dbo].[ScrapTable](
[ScrapID]
[int]
NOT
NULL
ON
[PRIMARY]
END
GO
Right click on my stored procedure and hit “Modify”:
IF
EXISTS
(SELECT
FROM
sys.objects
WHERE
object_id
=
OBJECT_ID(N'[dbo].[GetScrap]')
AND
type
in
(N'P',
N'PC'))
BEGIN
EXEC
dbo.sp_executesql
@statement
=
N'ALTER PROCEDURE [dbo].[GetScrap]
AS
BEGIN
                SET NOCOUNT ON;
                SELECT * FROM dbo.ScrapTable
END
END
SSMS 11.0 does it definitely in another way.
Regards,
Stef, DBA

Why is there a difference between LR4 image and PS-CS5 version which is much darker

if i get an image to look great in LR4 (v. 2012) after upgrading the cat from LR3,(version 2010) - and it looks great in the new develop mode, then I open up the image in the latest PS CS5, version 12.0.4 x64, the image then looks much darker in PS and in no way matches the image in LR 4.
NOT ACCEPTABLE! WHY, Adobe??
I'm on a 64 bit Mac, OS 10.6.8 -- my catalogue settings in LR are for the largest monitor, highest preview, don't discard... and it writes changes immediately to xmp
is it because the RAW processor in PS doesn't yet match the one in lightroom? and it won't be the same till CS6 is out, and I upgrade to that? Adobe says all my software is up to date. How do I get things to match? never had this problem with LR3 or any earlier version. What's up? I'm not on the beta - i just downloaded the real thing from Adobe - read all about it online and I've been very comfortable wiuith LR for years, but I should be able to hit command E on my mac and open it up in PS, looking exactly the same in PS as the image in Lightroom. the new develop mode in LR4 is awesome - so much better than LR3 which was so much better than 2. Why is this happening? How do i get the images to match? what am i doing wrong, if anything? any clues anyone? thanks in advance. ( would love to include a sample, but I don't see how i can attach a scressn shot of the two.)
anyone?
owen

thanks for replying, Jeff. You may be a user ( that sounds funny ) but you are certainly one well connected user. thanks for getting back,
I just click command E using the shortcut for "edit in CS5." I never go to the menu, if i know the shortcut. My basic color settings for PS has for years been what i have set up as a ProPhoto /rel. colorimetric color space on both PS... and in LR, my edit in PS-CS5 set up is for a PSD in 16 bit ProPhoto as well - should look the same, right? You'll probably scold me for saving as a layered PSD instead of a layered tiff - I can't remember why - but I do have my PS preference set for ALWAYS maximize PSD and PSB compatability. Could you give me your advice and reason for tiff vs PSD. I hear that PSD can be "less efficient" than tiff with respect to metadata updates. Not sure exactly what less eficient means or what problems may arise with PSDs.
Years ago I got into RAW files with the D65 workshops with Seth Resnick and Jamie,before there ever was a lightroom - in fact i first downloaded the first ACR plug in from adobe before it became a part of PS - ( early 2003? ) - and perhaps you pixel geniuses don't always see eye to eye on certain things but i respect both of your opinions and your work and I'm thankful that you are both out there helping us... and Thomas and all the hard working people at Adobe too.
So... after posting, in the deveop mode in LR4 - I switched process versions from 2010- (there was a slight change)- then i switched it back to 2012 - then reopened the file ( exported it to CS5 ) in PS - and lo and behold - it all looked good. the lightroom and PS versions looked like a match - perhaps I should chalk this up to user error. not sure.
that said, when i take a canon CR2 file and just drop it into PS on my dock and it opens in CS5's ACR - I still see the ACR equivalent of LR3- which is to say - the exposure, recovery, fill light system- not the new development modality of exposure/contrast - highlights, shadows, whites and blacks -- do you know if we have to wait for CS6 to see the new ACR that matches Lightroom4 - or is an update soon forthcoming? what do you say, Big Guy?
and many thanks for your attention, your knowledge , and your sense of humor.
~oc

Difference between 4.6 and 4.7 vesion in MM point of view

Hai,
can any body tell me the difference between 4.6 and 4.7 version. Please treat it as Urgent

SAP BW 7.0 is called SAP BI and is one of the components of SAP NetWeaver 2004s. There are many differences between them in areas like extraction, EDW, reporting, analysis administration and so forth. For a detailed description, please refer to the documentation given on help.sap.com.
1. No Update rules or Transfer rules (Not mandatory in data flow)
2.Instead of update rules and Transfer rules new concept introduced called transformations.
3. New ODS introduced in additional to the Standard and transactional.
4. ODS is renamed as DataStore to meet with the global data warehousing standards.
And lot more changes in the functionalities of BEX query designer and WAD etc.
5. In Infosets now you can include Infocubes as well.
6. The Re-Modeling transaction helps you adding new key figures and characteristics and handles historical data as well without much hassle. This facility is available only for info cube.
7. The BI accelerator (for now only for infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
8. The monitoring has been improved with a new portal based cockpit. Which means you would need to have an EP guy in your project for implementing the portal !
9. Search functionality has improved!! You can search any object. Not like 3.5
10. Transformations are in and routines are passe! Yes, you can always revert to the old transactions too.

Flash Builder 4.6 differences between debug version and apk release version

Similar Messages

Maybe you are looking for