Flash Builder 4.7 : Cannot complete Licensing

Hello,
I'm owner of two Flash Builder 4.7 licenses, they are listed in my Adobe account, under Products and Services sections as
                            Flash Builder Std                   4.7                      multi
                            Flash Builder Prem                4.7                     multi
I recently formated my computer and installed back Flash Builder 4.7.
My problem is, if I click on "License this product" and enter any of my license key, I have the following error :
                          Serial Number you provided is valid, but a qualifying product could not be found on this computer.
I tried to install Flash Builder 4.6 instead, but it launch me the same error.
Could you help me please ?
Thanks a lot.

Hi Atul_Saini,
So I checked your link and all seems correct on my computer.
At the bottom of the link you provided there is "see also" section, about activation / deactivation.
I did not deactivated my licenses before my window re-install, and if now I go to Flash Builder -> Help , desactivation button is greyed out. Could it be the source of my problem that I used my licenses on two computer and did not deactivated them ?
If yes, how could I deactivate thoses products ? I searched on my profile but I can't find a way to do it.

Similar Messages

Cannot apply Flash Builder 4.7 Premium upgrade license

We purchased Flash Builder 4.7 Premium upgrade license. When we entered the new key and then the original 4.0 Premium license key, it said "This serial number is not for a qualifying product. Please try again.". From the License Certificate paperwork we have, it does show the serial number is for Flash Builder 4.0 Premium. Could anyone help?

Hi Jeff, Thanks for your reply. we purchased the upgrade license directly from Adobe web site and I can only see the order of the upgrade license from https://www.adobe.com/account/account-orders.html.
The original Flash builder 4.0 Premium was purchased through a reseller our company normally use back in 2010. The Software license certificate shows TLP 5.0 LICENSE PROGRAM - CORPORATE. We do have either 4 or 6 seat license. We only have 1 developer left for this project so only 1 upgrade license was purchased.
Does our Flash builder 4.0 premium license qualify for the upgrade offer? If not how do we upgrade?

Flash Builder 4.7 -- Cannot resolve ViewNavigatorApplication

Flash Builder 4.7 said my license expired, forced me to reinstall. Put in my credentials, everything is fine there. Except now my mobile project says that it can not resolve ViewNavigatorApplication to a component implementation. Last working build was using Air 3.5. I have tried overlaying various versions, 3.5 ac2, 3.6 ac2, even the old 3.5 doesn't work anymore. What is going on?!

Hi
I am having same issue.
Have followed the instruction at: http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html
When go to compile my mobile flex app I get cant resolve ViewNavigationApplication and new flex mobile projects do not 'finish' when using the wizard.
[Update]
Have AIRSDK 3.5 with ASC 2.0 is working nicely. Also must remember, when updating SDK need to make sure there are not firewall restrictions to the new commands (adt)
This has solved my ios deployment issue with AIR 3.4 (which was only reason invesigating AIR 3.6 in the first place)

Flash builder 4.5 code completion doesn't show public function

Hi,
I am migrating from flex3 to flash builder 4.5 and it shows a question mark at one of my lines.
No errors, and the code works fine when i run it.. only there is no code completion in flash builder.
My code:
//i use a custom component like this:
<generalmenu:menu x="59" y="58" id="mymenu"/>
//this component loads its functions from a separate as(no class just simple as code) file (so i don't have all code in the file with visual components)
<fx:Script source="menusource.as"/>
//inside menusource.as there is a function that takes care of closing my app.
public function closeprogram():void
//closing window goes here
my problem..
when i type inside my function at application level:
mymenu.closeprogram();
i get a question mark in front of it: Call to a possibly undefined method closeprogram
code completion doesn't recognize my public functions inside the mymenu component, it does see mymenu but when i hit .(dot) it doesn't give me a list of functions.
How can i get code completion to work? Are there changes in the way you call as files in flash builder 4.5? Please some help.. code completion makes life much better.

I found why the nasty behavior above was happening ::- D.
I usually design my classes in Enterprise Architect. Since this is a rather large project, started from of about 30 classes, I did the entire architecture in EA, then, generated the code.
But, EA has poor AS3 support. And as a consequence, it has a few issues, such as the way it generates CONSTRUCTORS:
public function G3Widget (name: String, parent: IG3Parent = null): void
Spot the mistake ::- D.

Flash Builder 4.5 cannot run apps

Any idea what to do with that:
Flash Builder cannot locate the required version of Adobe Flash Player. You might need to install the Flash Player or reinstall Flash Builder.
Do you want to try to run your application with the current version?

Try to avoid using MX components in mobile apps.

Flash Builder 4.5 for PHP Licensing with CS5 Subscription

its unclear to me if we subscribe to CS5 Master Collection or Web Premium, but want the PHP edition how you go about that, can the upgrade be part of the subscription, if not can the subscription builder be upgraded?

I also have Flash Builder 4.5 for PHP and the ANT view does not show when going to Window -> Show View --> Other. I could not find it in any of the folders.
However, I was able to add it by hitting Command 3 (CTRL 3 on PC) and typing Ant.

Flash Builder 4.5 iOS Development license for teacing purposes

I teach in an academic institution where we have Flash Builder 4.5 installed.The current set up only allows us to configure apps for the android platform and not for iOS.Is it possible to configure the application for the iOS platform purely for the purpose of developing apps for academic study?

Dear Flexer,
At this time, you can only create an AS project for iOs.
I heard, that whis realease of Flash Builder 4.5 you can create mxml
project for all plateform.
Best regards
Isabelle LOYER
InterSystemes
20 rue de Montubois
95840 Bethemont la Foret
Tel : 33 +1 34 69 22 66
Fax : 33 +1 34 69 26 28
email : [email protected]
www.intersystemes.fr
www.intersystemes.net
Le 20/06/11 10:29, Arun Ganesh a écrit :
me to waiting for the response
>

Integrating Licensing without Flash Builder

Hi,
I posted a question about InMarket SDK for JavaScript developers before:
http://forums.adobe.com/thread/742240?tstart=0
So I checked the answered documentation and tried to integrate licensing into my AIR application I made with only JavaScript.
BUT, according to the document, it seems that Flash Builder is required for the licensing integration.
Do I have to buy Flash Builder just for the licensing? It's very expensive for me. Is there any way to integrate without Flash Builder?
Thanks.

You don't have to buy Flash Builder. You can user Flex and AIR SDK that is available for free. If you use Flash Builder the process is simpler, but its possible for you to use the free tools and achieve the same results.
Here are the steps you can follow:
1) Install the AIR SDK – See http://help.adobe.com/en_US/air/build/WS2d8d13466044a73328ed2239124110d12b3-8000.html
2) Install the Flex SDK - http://help.adobe.com/en_US/air/build/WS2d8d13466044a733190f0432124114d9a19-8000.html
3) Follow this tutorial to learn how to compile and package Flex application - http://help.adobe.com/en_US/air/build/WS144092a96ffef7cc4c0afd1212601c9a36f-8000.html
4) Follow out tutorial on building AJAX apps for InMarket, but use the AIR command line compiler and packager tools as opposed to using Flash Builder.

I need help migrating an existing project from Flash Professional CS6 to Flash Builder 4.6.

I have followed tutorials...instructions on the web...all I get are unsolvable errors.
I have a large Air application that compiles fine and works in Flash. However I would like to take advantage of the as3xls api which does not work in Flash Professional (for no reason in particular the internet just tells me it won't work because Flash Professional cannot access some part of the Flex framework).
So I want to make my project work in Flash Builder. However, when I attempt to reference my document class, flash builder gives me an error telling me the package path com.andrewbefus.ModelMapper no longer works. It does this no matter how I select the folder to reference my document class. If I change the path to nothing...Flash Builder is happy with my document class and unhappy with every other class I have made.
Then I decided to make a new Flash Builder ActionScript file and simply replace the ModelMapper.as document class that Flash Builder created with my completed ModelMapper.as. After some messing around with paths and directories, I got Flash Builder to be happy with my program structure but then all hell broke loose on almost every single Class outside the Flash Builder framework. One by one I attempted to tell Flash Builder where to go to get my components, fl.motion classes, and my custom classes but Flash Builder refused to recognise them unless I reference the folder containing the files, and then proceeded to tell me that the project path of every single class needed to be changed. I imagine if I spend the rest of my day mucking around with this something else will come up.
I went looking for a tutorial explaining how to migrate a Flash Professional project over to Flash Builder. The closest thing I could come up with told me to just select my fla. file by going Project<Flash Professional<Create project using Fla file... which worked great except refused to compile my project as a desktop application for no sane reason - giving no option to select my project when I attempted to create a new Run Configuration.
One frustration after another....

I've also followed all the instructions here:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Still no luck...
L.

Flash Builder 4.7 SWC contents garbled, works in FlashDevelop

I have an all-defaults Action Script - Desktop (Runs in Adobe AIR) project with a single MovieClip on the stage from a SWC file created in newest Flash Pro CC. The MovieClip contains buttons, text, etc, for a menu system.
When I build and run it in my regular IDE (Flash Develop), it looks correct:
http://snag.gy/7UFFN.jpg
When I build and run in Flash Builder, it is a complete mess:
http://snag.gy/7Er2e.jpg
The problem is more than visual; DisplayObjects within GfxMainMenu have been randomly swapped with others from the same SWC. When I try to hook up my buttons, I find some of them are actually missing. The weird upside-down ghost logo MovieClip has actually replaced the orange SimpleButton. Needless to say this makes profiling difficult. I've been having this problem with Flash Builder for 3 years across many versions of FB, AIR, Windows, etc etc. Every year I try again with a new approach, hopeful that they've fixed this and I might be able to use FB's excellent profiler for this project. But the basic issue is the same: FB hates the contents of this SWC and I can't find a way to cleanse the demons from it.
This is the code:
public function Main():void
addChild(new GfxMainMenu());
You can download the project and SWC here - I'd love to know if others can at least recreate this:
https://dl.dropboxusercontent.com/u/11786661/FlashBuilderTest.zip
Anybody have any clues?

Looking into this further, all the garbled symbols appear to be SimpleButtons. Their up, over, and down states are either blank, or they contain random symbols from elsewhere in the file. Many of my buttons contain dynamic TextFields with embedded fonts... but I think the problem may occur in a situation as simple as having 1 shape-filled button and 2 exported symbols in the same swc. I've been taking things out of the swc or copying them to a fresh fla all morning trying to track down a specific simple example of the bug.
But it's gotten hard as FB started crashing and nuking my workspace repeatedly. I remember how much I hate this thing now. FlashDevelop has a great editor and debugger, and Scout is a good profiler, but there are things that only FB can do. Specifically, tell me which references are preventing my objects from being garbage collected.

How do I rebuild a Flex 3.0/SDK 3.2 application in Flash Builder 4.7?

I am trying to rebuild an old Adobe Flex/Air app. The original developer is gone and we don't have the development environment he used available to us to do the rebuild. As best I can see, this is an Adobe Flex SDK 3.2 application rebuilt in Flex Builder 3.0. I've been able to get the project imported to Flash Builder 4.7 and set the SDK to use the 3.2 SDK and get a build, but all of my controls have the "Trial Version" water mark.
How can I get rid of this watermark? Do I need a license for SDK 3.2 in addition to my Flash Builder 4.7 license?
I've tried also to "upgrade" the proejct to 4.6 SDK in 3.0 Compatibility mode, but I am getting lots of errors at runtime for null object.
I found this thread: http://forums.adobe.com/thread/441869
But I don't know if that means I need to have an Adobe Flex 3.2 license key? or will my new Flash Builder 4.7 key work?
I'm new to Flex/Air and I'm just trying to get this old project rebuilt. Any suggestions will be appreciated.

Update - I have updated the license.properties file and added the compiler switch but still no luck. Our Flash Builder 4.7 is fully licensed so I guess I need to know where to buy a Flex Builder 3 license key. Is anyone from Adobe here? Maybe someone can help me out please?

Flash Builder Premium 4.5 Plugin Error: RequiresLicense handler

Hi,
I am using the Flash Builder Premium 4.5 Plugin (licensed copy) with SpringSource ToolSuite (STS) 2.6.1. I am getting this error that stops me building my app:
Unable to resolve a class for RequiresLicense handler: mx.automation:AutomationLicesneHandler.
...yes, the word 'license' is mis-spelled in the error message.
I've tried a fresh install of STS 2.6.1 and re-installing Flash Builder and the Plugin, to no avail.
Please help.
Thanks!

I did a workaround by adding this compiler argument:
${flexlib}/libs/automation/automation_agent.swc
...which points to that file in Flex 4.5. I can now build the app.
Why do I need to do this now when I didn't need to do so before ?

Fujitsu tabet m532 usb driver not work with flash builder

Hi,
I have a fujitsu tabet m532 that is not among the list of certified device but has its own of 32 bit usb driver.
But flash builder 4.5 cannot find the driver.
The hardware id I try also not work:
USB\VID_04C5&PID_133A&REV_9999&MI_01
USB\VID_04C5&PID_133A&MI_01
Can you help?
Thanks
Also, can I just edit the inf file using notepad and make it display line by line or any editor I would need?

Moving this discussion to the Using Flash Builder forum.

I have licensed version of Flash Builder with Master Collection CS5.5 how to upgrade to Flash Builder 4.7

Did not take advantage of the free upgrade awhile back and need to upgrade my Flash Builder 4.6 licensed in Master Collection 5.5 to version 4.7.
My serial is not working from my MC5.5 and my individual license from my Flash Builder is not working.
Any ideas on to solve this issue?
Tried to purchase an upgrade on their site but cannot find one that will let me upgrade from 4.6 to 4.7.

No. You'll either have to pay for CS6 at full price. Or you'll need a subscription to the Creative Cloud. I highly recommend the latter.

Need to purchase license for flash builder without serial number

I downloaded Flash Builder 4.6 from the internet, therefore I don't have the serial number. how I can buy a license for it?

Chances are you cannot purchase a license For version 4.6 since 4.7 is the most current release.

Flash Builder 4.7 : Cannot complete Licensing

Similar Messages

Maybe you are looking for