Flash catalyst cs5.5 not working when i run the project
when i ran prodjects in flash catalyst cs5 it came up as a webpage that could scroll, now in cs5.5 when i run the prodject it cannot scroll and it doesn't scroll when you export for web servers, help much apreciated.
Vijetha wrote:
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.
hello vijetha,
window and canvas show scroll bar when it need.
You should show block property
and set block scroll bar
hope this helps..
Hamid
Similar Messages
-
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
In this form , there are 5 canvas namely
CANVAS2 - Stacked Canvas
PASS - Content Canvas
MAT_RATES - Content Canvas
DATE - Content Canvas
PREVIOUS - Content Canvas
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.Vijetha wrote:
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.
hello vijetha,
window and canvas show scroll bar when it need.
You should show block property
and set block scroll bar
hope this helps..
Hamid -
Why spark videodisplay control does not work when i run the application?
Even in the mode design I can not see the video, thks.....
@Jorge,
Try using file:/// instead of file:/.
This seems to work for me:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx">
<s:VideoDisplay x="159" y="96"
source="file:///C:/Documents and Settings/pdehaan/My Documents/My Videos/walking.flv"
loop="true"
width="384" height="267"/>
</s:Application>
But I'd probably recommend copying the .FLV file into your Builder project or putting it online instead of trying to play it back from a hardcoded file:/// path.
Peter -
I have set the Mathscript preferences 'Path' and 'Working Directory' parameters to the folder containing my scripts, and it works when
I run the VI, but I get a -90031 error when I run the executable.
What am I doing wrong?Hi Umars,
I had the same problem. In my case it turned out that it was caused the surrounding code. Plus the error
message was missleading. I got the error message -90031 (unknown symbol CalcWelchCorr2) for the
following piece of code:
ecorr= 1;
if setup & src== 1
for lag= 1:50
rho= CalcWelchCorr2( lag, win );
if rho > 0.001, ecorr= [ecorr; rho]; else, break; end
end
CalcWelchCorr2 is a user defined function located in the MS search path. The problem was caused by the
"break" in line 5. Actually this line was marked by some little warning symbol. Eventualle I modified the code
to get rid of the break
ecorr= 1;
if setup & src== 1
lag= 1; rho= CalcWelchCorr2( lag, win );
while rho > 0.001 && lag <= 50
ecorr= [ecorr; rho];
lag= lag+ 1; rho= CalcWelchCorr2( lag, win );
end
end
and voila, the executable worked fine.
However, I had to check all my VIs ( > 200 !) for similar errors which gave me headaches.
Why does the application builder doesn't produce some appropriate error message ?
E.g. "Line xxx in MathScript node in VI xxx cannot be executed"? Currently you get the
impression that the application was build successfully but eventually you get strange errors
or even erroneous results. Keep in mind that tracking down bugs in the final application is
much more difficult that in LV. Also the error message produced by the executable was not
helpfull at all. -
i have an apple iphone4 im facing the problem that my phone senser is not working when i rotate the phone in videos or music play there is working from the senser can u tell me what can i do for this....
If you double tap the home button, and then swipe your finger to the right, make sure you DO NOT have the Lock Orientation button enabled.
You know it is disabled if there is no padlock in the middle of the icon. -
my i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting >general<reset<reset network setting. but all in vain. tell me the solution
restore your phone as new through itunes. if the issue persists after a factory restore via itunes, it means you've got a hardware issue and the phone needs to be repaired
-
I am new at Captivate 8 and I have created a learning project using an existing power point presentation. I have added a button that will allow my students to view a video on the subject. When I run the project in Preview the button works but when I publish it, it stops working.
I added an Interactions button and in the Actions on Success I open an URL or file. I have placed the video on our web server. In the URL I point to our web server "http://www.wmabhs.org/Media/Add Client 3rd Party Coverage.mp4". If I run this from any browser it works. So what do you think I have done wrong?
-
Flash Catalyst CS5.5 Crashes when importing photoshop document
I am trying to import a photoshop file authored in Photoshop CS5.1 into Flash Catalyst CS5.5, and Flash catalyst crashes every time part way through the import. A few specifics:
Mac OS X 10.6.8
Photoshop CS5.1
Catalyst CS5.5
I have searched this forum for suggestions, and I have tried a number of them:
* Removing layers from the source psd file to find a culprit layer (Removing all but one layer still crashes)
* Running Photoshop in 32 bit mode, dragging the layers to a new document and saving
* Waving chicken bones over my laptop (Nobody really suggested this, for good reason -- it doesn't work)
I have also replicated this crash on other Macintosh computers running the same Catalyst and Photoshop versions.
I have included part of the crash dump below. I've highlighted the section that mentions how many crashes I've had. I am happy to provide .psd files to demonstrate the issue, and troubleshoot any way necessary.
Thank you,
Cameron
Process: Adobe Flash Catalyst CS5.5 [22968]
Path: /Applications/Adobe Flash Catalyst CS5.5/Adobe Flash Catalyst CS5.5.app/Contents/MacOS/Adobe Flash Catalyst CS5.5
Identifier: com.adobe.thermo
Version: 1.5.0 (1.5.0)
Code Type: X86 (Native)
Parent Process: launchd [428]
Date/Time: 2011-11-17 14:26:50.806 -0700
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 130540 sec
Crashes Since Last Report: 52
Per-App Interval Since Last Report: 303281 sec
Per-App Crashes Since Last Report: 11
Anonymous UUID: F902AC97-7ADE-4BA0-80B6-8CCFD2B41396
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Application Specific Information:
Java information:
Exception type: Bus Error (0xa) at pc=0000000093506dd0
Java VM: Java HotSpot(TM) Client VM (20.1-b02-384 mixed mode macosx-x86)
Current thread (0000000013000c00): JavaThread "main" [_thread_in_native, id=-1602804416, stack(00000000bf800000,00000000c0000000)]
Stack: [00000000bf800000,00000000c0000000]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j com.adobe.flexide.nativelibs.NativeImporter.ImportArtworkFileImpl(Ljava/lang/String;Ljava /lang/String;Ljava/lang/String;Ljava/lang/Object;I[I)I+0Hum. Have you tried a new Photoshop file with say one layer in it and just a fill or something very basic, then importing that in?
This might tell us if it is the PSD that has the issue or the import engine in Catalyst.
You said you removed the layers. So you tried importing each of the layers one by one into Catalyst with success? Then that means you have one layer that is troublesome. I would suspect that there is a filter or effect that has been applied that source of the issue.
Have you read this? http://www.adobe.com/devnet/flashcatalyst/articles/best-practices-flashcatalyst-photoshop. html
Chris -
the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.
Did you do a software update?
AppleTV is unable to start properly. You need to connect to a computer running iTunes as detailed here:
Apple TV (2nd and 3rd generation): Restoring your Apple TV -
My flash links are not working when it is www request
Dear Friends,
We have done one application for the mobiles..in that we have used flash xml menu. In my xml menu i have mentioned the urls with www. request.
When its http://www.xyz.com menu links are not working.
If its http://xyz.com my menu links are working fine. Can you please suggest me once how can i achive this.How did you fix it?
-
Flex application not working when deployed run from Server
Hi,
I have Flex application which takes a parameter from user, makes a web-service call and returns the message.
This application is running perfectly when I launch from IDE.
But when I copy the files from bin-release to server and launch it, it gives me no result.
In the crossdomain file on the server which hosts web-service, I have added the my host IP in the
allow-access-from domain tag.
In the initialization method of the application I load crossdomain using following code:
Security.allowDomain("remoteservername");
Security.loadPolicyFile("http://remoteservername/crossdomain.xml");
var request:URLRequest = new URLRequest("http://remoteservername/crossdomain.xml");
var loader:URLLoader = new URLLoader();
loader.load(request);
Is there a way I can debug application when running from server?
Please give me some pointer to solve this problem.
Thank you.
ChintanAlex thanks for reply
The URL for the app is http://<some_IP>/flex_app
<some_IP> is added in crossdomain.
Also we have outbound IP's and of these are also added in the crossdomain file.
This is the current content of crossdomain file:
<cross-domain-policy>
<site-control permitted-cross-domain-policies="master-only"/>
<allow-access-from domain="<some_IP>"/>
<allow-access-from domain="<outbound_IP1>"/>
<allow-access-from domain="<outbound_IP2>"/>
<allow-access-from domain="<outbound_IP3>"/>
<allow-http-request-headers-from domain="<outbound_IP1>" headers="SOAPAction"/>
<allow-http-request-headers-from domain="<outbound_IP2>" headers="SOAPAction"/>
<allow-http-request-headers-from domain="<outbound_IP3>" headers="SOAPAction"/>
</cross-domain-policy>
App runs perfectly fine when launched from Flex Builder. -
Why table getWidth and setWidth is not working when resize column the table
hi all,
i want to know why the setWidth is not working in the following code,
try to uncomment the code in columnMarginChanged method and run it wont resize the table.
i cont set width(using setWidth) of the other table column using getWidth of the main table column.
and i want to resize the right side columns only (you can check when you resize the any column the left and right side columns also resizing)
any suggestions could be helpful.
import java.awt.BorderLayout;
import java.awt.Dimension;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.SwingUtilities;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ListSelectionEvent;
import javax.swing.event.TableColumnModelEvent;
import javax.swing.event.TableColumnModelListener;
import javax.swing.table.TableColumnModel;
public class SynTableResize extends JFrame implements TableColumnModelListener, ActionListener
JTable table1 = new JTable(5, 5);
JTable table2 = new JTable(5, 5);
JTable table3 = new JTable(5, 5);
JButton btn = new JButton("refresh");
JPanel pnlcontainer = new JPanel();
public SynTableResize()
setLayout(new BorderLayout());
pnlcontainer.setLayout(new BoxLayout(pnlcontainer, BoxLayout.Y_AXIS));
pnlcontainer.add(table1.getTableHeader());
pnlcontainer.add(Box.createVerticalStrut(5));
pnlcontainer.add(table2);
pnlcontainer.add(Box.createVerticalStrut(5));
pnlcontainer.add(table3);
table2.setTableHeader(null);
table3.setTableHeader(null);
table1.getColumnModel().addColumnModelListener(this);
table3.setColumnModel(table1.getColumnModel());
table2.setColumnModel(table1.getColumnModel());
table2.getColumnModel().addColumnModelListener(table1);
table3.getColumnModel().addColumnModelListener(table1);
btn.addActionListener(this);
getContentPane().add(pnlcontainer, BorderLayout.CENTER);
getContentPane().add(btn, BorderLayout.SOUTH);
setSize(new Dimension(400, 400));
setVisible(true);
setDefaultCloseOperation(EXIT_ON_CLOSE);
public static void main(String[] args)
new SynTableResize();
public void columnAdded(TableColumnModelEvent e)
public void columnMarginChanged(ChangeEvent e)
TableColumnModel tcm = table1.getColumnModel();
int columns = tcm.getColumnCount();
for (int i = 0; i < columns; i++)
table2.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getWidth());
table3.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getWidth());
// the following commented code wont work.
// table2.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getPreferredWidth());
// table3.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getPreferredWidth());
// table2.getColumnModel().getColumn(i).setWidth(tcm.getColumn(i).getWidth());
// table3.getColumnModel().getColumn(i).setWidth(tcm.getColumn(i).getWidth());
SwingUtilities.invokeLater(new Runnable()
public void run()
table2.revalidate();
table3.revalidate();
public void columnMoved(TableColumnModelEvent e)
public void columnRemoved(TableColumnModelEvent e)
public void columnSelectionChanged(ListSelectionEvent e)
public void actionPerformed(ActionEvent e)
JTable table = new JTable(5, 5);
table.setColumnModel(table1.getColumnModel());
table.getColumnModel().addColumnModelListener(table1);
pnlcontainer.add(Box.createVerticalStrut(5));
pnlcontainer.add(table);
pnlcontainer.validate();
pnlcontainer.repaint();
}thanks
dayananda b vhi,
thanks for your replay,
yes i know that, you can check the following code it works fine.
actually what i want is, when i resize table column it shold not automaticaly reszie when table resized and i dont want horizontal scroll bar, meaning that all table columns should resize with in the table size(say width 300)
if i make table autoresize off than horizontal scroll bar will appear and the other columns moved and i want scroll to view other columns.
please suggest me some way doing it, i tried with doLayout() no help,
doLayout() method only can be used when table resizes. first off all i want to restrict table resizing with in the limited size
import java.awt.BorderLayout;
import java.awt.Dimension;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.event.ChangeEvent;
import javax.swing.table.TableColumnModel;
public class TempSycnTable extends JFrame
JTable table1 = new JTable(5, 5);
MyTable table2 = new MyTable(5, 5);
MyTable table3 = new MyTable(5, 5);
JPanel pnlcontainer = new JPanel();
public TempSycnTable()
JScrollPane src2 = new JScrollPane(table2);
JScrollPane src3 = new JScrollPane(table3);
// table1.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
// table2.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
// table3.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
// src2.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
// src3.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
table2.setTableHeader(null);
table3.setTableHeader(null);
table3.setColumnModel(table1.getColumnModel());
table2.setColumnModel(table1.getColumnModel());
table2.getColumnModel().addColumnModelListener(table1);
table3.getColumnModel().addColumnModelListener(table1);
table2.setTableHeader(null);
table3.setTableHeader(null);
setLayout(new BorderLayout());
pnlcontainer.setLayout(new BoxLayout(pnlcontainer, BoxLayout.Y_AXIS));
pnlcontainer.add(table1.getTableHeader());
pnlcontainer.add(Box.createVerticalStrut(5));
pnlcontainer.add(src2);
pnlcontainer.add(Box.createVerticalStrut(5));
pnlcontainer.add(src3);
getContentPane().add(pnlcontainer, BorderLayout.CENTER);
setSize(new Dimension(300, 300));
setVisible(true);
setDefaultCloseOperation(EXIT_ON_CLOSE);
public static void main(String[] args)
new TempSycnTable();
class MyTable extends JTable
public MyTable()
super();
public MyTable(int numRows, int numColumns)
super(numRows, numColumns);
public void columnMarginChanged(ChangeEvent event)
final TableColumnModel eventModel = table1.getColumnModel();
final TableColumnModel thisModel = getColumnModel();
final int columnCount = eventModel.getColumnCount();
for (int i = 0; i < columnCount; i++)
thisModel.getColumn(i).setWidth(eventModel.getColumn(i).getWidth());
repaint();
}thanks
daya -
In my flash project i am using ActionScript to get FULLScreen and mouse hide action. I hv already used the AS3 in Adobe Flash CC and AS2 in Adobe Flash CS6. All my files are working well, both .SWF and .EXE (projector..) . But the client is saying in his pc the Full SCREEN and Mouse hide is not working. I instructed to update the flash player plugins, still they are getting the same issue. What is the matter pls any one guide us. My code is in the first frame of Flash file which is mention below.
/*AS2 code*/
fscommand("fullscreen","true");
Mouse.hide();
/*AS3 code*/
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
stage.scaleMode = StageScaleMode.SHOW_ALL;
Mouse.hide();Hi all, few days ago the client told , one of the project file (.SWF and .EXE) showing full screen. Again day before yesterday the client again said, all the project files working Full Screen and Mouse hide action. Still i do know such happens ? if any technical issue is behind its problem than anyone pls inform me. However it is running well in their PC now.
-
My itouch is not working when i touch the screen nothing happens it does not respond
my ipod does not respond when i try to slide to unlock it does nothing like if the thouch part does not work y is this happening?????
Try resetting it:
http://support.apple.com/kb/HT1430
Hope that helps. -
My camera will not work when I open the app the screen is blank
When I turn on the camera app the screen is blank, any suggestions
Try closing the Camera app completely and see if the camera works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Maybe you are looking for
-
Empty files are getting created at receiver FTP server
Hi Experts, I have an Idoc to File scenario where I am sending an XML file to receiver FTP server. Scenario is working fine but sometimes an empty file is getting generated at receiver FTP server. I have already selected ignore empty file at receiver
-
Drop calls at our home in The Villages, Fl
Recently relocated from one home to another in the Villages, Fl and seems our cell phone get drop calls and people saying they can't hear us...if we go outside it doesn't seem to happen as often..I called Verizon and they recently told me to hit ###
-
How do you get I tunes to automatically skip songs it can't locate?
I really don't like the latest upgrade. Getting rid of the coverflow is a bad idea. It was one of the things I liked about Itunes, so might not bother with Itunes anymore. However, in the meantime, when playing all my music before the upgrade it wo
-
My Ipod touch cant be identified properly so i cant sync my music
i've tried everything i've found on apple support like reinstalling itunes or the USB cord. nothing is working please i need help
-
HT1473 sync voice messages from iphone to itunes
My iPhone 3GS will not transfer all of my voice messages to my iTunes in my Computer. Could use some help please.