Flash CC doesn't start up after last update

Flash CC doesn't start up after last update. It said "Training en zelfstudie" (Training and self-stufy in Dutch) for the update.
Everything was working fine before the update, now if I try to start-up Flash solo,
it says: "Flash werkt niet meer" (Flash has stopped working), and quits.
As you can probably tell from the message, I'm on Windows 7.
Now here is interesting info: if I double click a previous movie, then Flash starts up fine and loads the previous movie.
However when I close it and the screen that should appear is the "new movie" dialog, flash hangs again.
So obviously something went wrong installing the new update, or the update doesn't work properly.
I'm now working with my pre-cc flash5.5 version, which I re-installed to avoid crashing flash every time I close a file.
My questions:
1- Where do I log this problem? (Or am I in the right place?)
2- Can I re-install the previous version, which worked fine? (I can live without tutorials etc.)
3- Can I try to re-install this version if the above is not possible and how do I go about doing that?

What fixed the problem for me was just reinstalling Flash CC. I thought I'd give it a try, because I couldn't find a message of anyone experiencing the same problem.
So I used the control panel to uninstall Flash, then I tried reinstalling.
Creative Cloud kept saying Flash is up to date, so you can't reinstall. If you click on the gear and choose Exit and then restart Creative Cloud it will take a few seconds, but the it will see the situation as it is and you can reinstall Flash.
After the reinstall the issue was gone.
Thanks for the other solutions, I think this is a handy resource for rolling back Flash if I ever do need it
and gives me more confidence in the creative cloud product.
Maybe Adobe will pick it up and make it easier for us 'normal' creative-cloud users to
pick which version we want. Like you can do in CVS systems.

Similar Messages

[SOLVED] UEFI-System doesn't start anymore after rEFInd update

Hi there,
got some problem with my UEFI system after todays update of refind-efi: Arch doesn't boot anymore
What have I done:
At first I did a
$ sudo pacman -Syu
During the update I was presented with the usual information concerning copying some files from /usr/lib/refind/*. So I did this:
$ sudo cp /usr/lib/refind/refind_x64.efi /boot/efi/EFI/refind/refind_x64.efi
Than I did:
$ sudo cp /usr/lib/refind/config/refind.conf /boot/efi/EFI/refind/refind.conf
$ sudo cp -r /usr/share/refind/icons /boot/efi/EFI/refind/icons
After that I rebooted my computer and was presented with an "Asrock" writing that doesn't change to the rEFInd-screen as it should.
Question: What can I do now? (And what did I wrong?)
Last edited by swordfish (2013-01-11 17:01:54)

Hi Rod,
thanks for your quick answer !
Ok, you write:
srs5694 wrote:
The 0.6.3 package changes the name of the rEFInd binary from refindx64.efi to refind_x64.efi. This is done because the official rEFInd release uses the latter name, and it includes support scripts that work correctly only if that name is used. Thus, if you deleted your old binary and copied the new one in place without renaming it to the old name, it would stop working, since the NVRAM entry would still point to the old name. There are two solutions:
Rename the new binary to the old name (refindx64.efi). If you do this, you'll need to keep doing it in the future or eventually do the next thing. Also, this might not work if your firmware has "helpfully" removed the existing entry. Thus, the next option is probably better...
Use efibootmgr to add a new entry for the new name. The Arch wiki has details on this here and probably elsewhere, too.
Jepp, I've seen the new name "refind_x64.efi". During my attempt to perform a proper install I did what you assume in your first solution - renaming the new binary to the old name (refindx64.efi).
After that my system didn't reboot ...
After that I booted from my USB stick with which I've installed my Arch system. I mounted my system partitions to /mnt, loaded the efivars module and arch-chrooted into the system. From there I copied the new binary from /usr/lib/refind/refind_x64.efi to /boot/efi/EFI/refind/refind_x64.efi and did this:
# efibootmgr -c -g -d /dev/sda -p 1 -w -L "rEFInd" -l '\EFI\refind\refind_x64.efi'
/boot/efi is mounted to /dev/sda1
But even after I did this a reboot only led to the well known green "Asrock" writing - no rEFInd appeared
Using the efi shell I can see that the boot entries seem to be okay.
srs5694 wrote:rEFInd 0.6.3 has a known bug that causes it to crash on some systems. Upgrading to 0.6.4 may be necessary if you're affected by this bug. The usual symptom is a system hang, though, not a return to the firmware menu, so I suspect this isn't the problem. If it is, you can grab the official non-Arch rEFInd package and copy the refind_x64.efi file from it over the one on your ESP.
Hm, seems as if I have to try this ...

Eclipse started hanging after last update

Hi, folks, a couple days ago I updated and today I tried to use eclipse but it is hardly usable since it hang every minute or less for about 15 secs. The cpu usage goes about 80%, nothing else hangs, the system is still usable. Do u have any idea what package might have done this? Before this update I last updated about 2 months ago I know this is way too much time without update, but I had to be sure my system is working cause I was working on a project, and couldn't afford downtimes. I am working on php project now, not using it for java if this is in some way relevant info. Eclipse is not installed through pacman, just downloaded. I am also using a -ck kernel if this is relevant also. Thanks.

Have you tried using the version from the repos?
If it needs to be compiled with php support, there's likely a version in the AUR.

My iTunes doesn't start since the last update

I am using mac os x 10.7.4 and itunes 1.6.3. since this update itunes does not start anymore. What can I do ?

On Vista Home premium, uninstalling and reinstalling buth iTunes and Apple Applicatioon Support did NOT work for me.
What did work for me was manually copyting CoreVideo.dll from the Apple Application Support folder into my iTunes folders (actually, to both of them - under Program Files and Program Files (x86)) as per advice posted in a Windows forum, found after an hour or more of frustration and failure.
This appears to be a bug in the 10.1 installation scriptimng - what's going on?

Itunes doesn't recognize iphone after last update

HELP!!!!!!!!!!!
last week i updated last version of itunes, after that itunes won't recognize iphone, doesnt charge, i dont see iphone connected, cant transfer or delete music.....this is a pain in the a**.... i love this phone but this is my second one and i keep having problems....i have more problems with it but this is the urgent one one....can anybody help me please?????????????? oh, and i have windows (does it make any difference?)

Hello again, GiannisFromAthens.
At this point, considering that the primary issue is with getting the Windows update resolved, we need to get that taken care of first. To do so you may need to consult Microsoft, or whoever supports the installation of Windows on your computer, for more troubleshooting to resolve it.
Once that is resolved, if you are still experiencing the issue, you may find better information by using another of Apple's Support resources at https://expresslane.apple.com/GetProductGroupList.action for a more hands on response.
Cheers,
Pedro D.

Cannot start Fiefox after last update, on windows XP, tried uninstall and install- still nothing.

OPerating system Windows XP
Anti-virus- McAfee
Updated to Firefox 7.0.1 -- have not been able to start/launch since. Tried uninstall and new install and still nothing. Tried to reboot-- nothing-- I double click and the hour glsss appears for a second or 2 and nothing happens.

Thanks JRSPNW I will have to give that a try. At the moment I just have not tried doing anything else it, but a system restore will probably be the route I will need to take eventually, or I will just carry on with out iTunes on my computer. The program has become such a pain the a$$. This version is the most user unfriendly it has ever been.

HTML animation effects doesn't work after last update

After last update my html animation that have different effects with different time: fade, translate, rotation, scale, ecc... plays but some effects doesn't play.
Various animated png in html project appears immediatly without shows transitions or deformations.
I have made html animation with Motion Composer that have time curve for each effect.. and all work fine with previous dps desktop tools...
I don't use Hedge because folios with hedge animation is mooooooooore large than folios with motion composer animation.
A single complex animation (10 .png(1024x768) with multipe effects fo each) made with composer produce a 1MB folio...
The same animation made with Hedge produce more the 100MB folio.
why new version of dps don't show my html anim correctly ? I hope adobe correct this proble.

We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
Neil

My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?

My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?

If your MBP is under warranty, bring it to an Apple store and have the technicians fix it. If not, try the steps in this support article:
http://support.apple.com/kb/ts2570
Ciao.

Adobe PDF printer and "Start printing after last page is spooled"

Hi,
After calling the Belgian Support for Adobe Product, I'm trying to have some information here.
Hope to get some help.
We use acrobat pro XI on windows 7 client and when we print a test page with the "adobe pdf" print queue on network share, we get a printing error when the "start printing after last page is spooled" is selected in the advanced tab of the printer queue. (document is not generated, and stay in the spooler with an error).
This problem is not present if printed localy or when we use the "start printing immediately" or "print directly to the printer".
The support agent from adobe Belgium told me that the reason is generating adobe pdf on network share is not a supported operation. We have to save the document localy all the time.
Is it really an answer from Adobe ?
Do you have an other explanation ?
Thanks for your help,

Thanks for your very good explanation Dov.
We use Adobe livecycle for this kind of purpose.
The situation described is diffrent, but you completely repond and I will be able to have some element to find a solution.
In fact, I'm implementing a softwate called DeviceLock, used to control connected devices (usb, network, drive). But this software, once installed, change the local printer parameters from "print directly to the printer" to ""start printing after last page is spooled".
As we use redirected folder in our environment and users cannot use local drive (for user's data backup) you will understand the problem.
Of course, we should be able to force the correct settings back, But Devicelock seem to change this settings after policy refresh.
I have contact with Devicelock about this problem of course as their software modify the settings, but was looking for a reason why we were not able to use the "start printing after last page is spooled" parameters with adobe Printer.
Thanks for your explanation,
PS:The driver's dialog won't prevent you from setting “Start printing after last page is spooled” or “Print directly to the printer” but setting either of those options will cause the operations to fail as you note.
note that only "Start printing after last page is spooled" cause an error and this, only for network share location. The "print directly to the printer" or the "start printing immediately" work fine either on a local drive and a network share

Issues during start-up after last system update

After last update (what a coincidence, isn't it? ) I've begun to notice some "failed" messages during start-up. Here's a part of mu /var/log/messages.log file
Dec 15 20:39:41 felipe load-modules.sh: 'dmi:bvnAmericanMegatrendsInc.:bvrV1.0X:bd05/14/2008:svn:pn:pvr:rvnTobefilledbyO.E.M.:rnTobefilledbyO.E.M.:rvrTobefilledbyO.E.M.:cvn:ct3:cvr:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:LNXSYSTM:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0C01:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0C01:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0C01:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0100:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0800:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0303:PNP030B:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0000:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0200:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0C04:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0B00:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:ENE0100:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0F03:PNP0F13:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'pci:v00008086d00002448sv00000000sd00000000bc06sc04i01' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'usb:v0C45p62C0d0100dcEFdsc02dp01ic0Eisc02ip00' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'pnp:dPNP0800' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'pnp:dPNP0a08' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'pnp:dPNP0200' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'pci:v00001180d00000592sv00001462sd00003FADbc08sc80i00' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'pnp:dENE0100' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:cPNP0200' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:dPNP0c04' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:cENE0100' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:cPNP0800' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: Not loading module alias 'pcspkr' because it is blacklisted
Dec 15 20:39:43 felipe load-modules.sh: Not loading module 'snd_pcsp' for alias 'platform:pcspkr' because it is blacklisted
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:cPNP0a08' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: 'platform:iTCO_wdt' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: Not loading module 'pcspkr' for alias 'platform:pcspkr' because it is blacklisted
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:dPNP0a03' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:cPNP0c04' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:cPNP0a03' is not a valid module or alias name
Dec 15 20:39:44 felipe ntfs-3g[4727]: Version 1.5130 integrated FUSE 27 <29>Dec 15 20:39:44 ntfs-3g[4727]: Mounted /dev/sda2 (Read-Write, label "OS_Install", NTFS 3.1)
Dec 15 20:39:45 felipe ntfs-3g[4731]: Version 1.5130 integrated FUSE 27 <29>Dec 15 20:39:45 ntfs-3g[4731]: Mounted /dev/sda3 (Read-Write, label "Data", NTFS 3.1)
Dec 15 20:39:48 felipe init: Entering runlevel: 5
Dec 15 20:39:55 felipe dhcpcd[6118]: eth0: acknowledged 172.16.6.127 from 195.117.116.4
Dec 15 20:39:55 felipe dhcpcd[6118]: eth0: leased 172.16.6.127 for 604800 seconds
Dec 15 20:40:01 felipe load-modules.sh: 'platform:coretemp' is not a valid module or alias name
Dec 15 20:40:01 felipe load-modules.sh: 'platform:coretemp' is not a valid module or alias name
Dec 15 20:40:36 felipe atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
Dec 15 20:40:36 felipe atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
Dec 15 20:40:36 felipe atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
Dec 15 20:40:36 felipe atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
Dec 15 20:41:57 felipe hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Never seen such things before. What's going on?

Well, the last kernel-headers installation broke the whole system for me :S Let's hope a chroot from Live-CD will do.

After last update imac (2011) does't start.

After last update imac (2011) does't start. I press power button behind and its start screen with apple logo and gray progress bar, when progress bar is full its just turn off iMac. I Press button behind again and its come the same, over and over.

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2)

Phostoshop 64bit not working after last update 13.1.2

After the update phtotoshop 64bits is not working any more, I can use the 32bits.
Any quick fix?
this is my system info:
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x32
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 16262 MB
Free memory: 8749 MB
Memory available to Photoshop: 3255 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Unavailable
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 1023 MB
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 630M/PCIe/SSE2
Display: 2
Display Bounds: top=0, left=1920, bottom=1080, right=3840
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 2
Video Card: Intel(R) HD Graphics 4000
Driver Version: 9.17.10.2875
Driver Date: 20121017000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd32
Video Mode:
Video Card Caption: Intel(R) HD Graphics 4000
Video Card Memory: 2112 MB
Video Card Number: 1
Video Card: NVIDIA GeForce GT 630M
Driver Version: 9.18.13.697
Driver Date: 20121002000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: NVIDIA GeForce GT 630M
Video Card Memory: 1024 MB
Serial number: 90970547045799239564
Application folder: C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\
Temporary file path: C:\Users\juanpa\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 452.3G, 337.0G free
Required Plug-ins folder: C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Required\
Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/09/10-12:31:21   5.0.4   79.517869
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1686
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
   BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.1.0.20577   2.1.0.20577
   CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libeay32.dll   The OpenSSL Toolkit   0.9.8g
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   2.1.2.1681
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp71.dll   Microsoft® Visual Studio .NET   7.10.3077.0
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr71.dll   Microsoft® Visual Studio .NET   7.10.3052.4
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (32 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300
   ssleay32.dll   The OpenSSL Toolkit   0.9.8g
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
Required plug-ins:
   3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   Angled Strokes 13.0
   Average 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.3
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Collada 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Embed Watermark 4.0
   Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Extrude 13.0
   FastCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Maximum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mean 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Measurement Core 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Median 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mezzotint 13.0
   Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Picture Package Filter 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Pinch 13.0
   Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Range 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.1.2
   Shear 13.0
   Skewness 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   STL 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Sumi-e 13.0
   Summation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Variations 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   WIA Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Wind 13.0
   Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   ZigZag 13.0
Optional and third party plug-ins:
   Photoshop Touch 10.0
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Extensis
   Kuler
   Adobe Exchange
Installed TWAIN devices: NONE

I hope someone out here can help me as I'm having a similar problem upgrading to 13.1.2. I posted this under the wrong section about a week ago, so I'm reposting my issues here for convenience. I'm a Creative Cloud user. I have been using the 64-bit version of Photoshop 13.0.x on my system successfully for several months now. I have Windows 7, 3rd gen (Ivy Bridge) core i7 processor, 32GB of RAM, a 1TB Hard Drive, and am using an NVIDIA GeForce 670 video card.... so my system has plenty of processing power. Several nights ago, my Adobe application manager pops up on start up (as normal whenever there's app updates to be done) and says there's an update available for Photoshop (version 13.1.2, I think.. or something close to it, anyway) and Bridge. So, as normal, I apply the updates... Everything completely successfully according to the Applicatino Manager. However, when I try to start photoshop after the update, I get this window that pops up immediately upon double-clicking the Photoshop 64-bit icon on my desktop: "Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later." All I can do is "X" out the box to make it go away, so I did. Weird because obviously I have Windows 7 and all of my other software works great on my system, and I have Lightroom 4.3, other Adobe stuff, Serif software, ACDSee, etc... and I get no problems out of ANY of them running on my officially licensed version of Windows 7. So just for the heck of it, I uninstalled Photoshop completely and then reinstalled it using the Adobe Application Manager. It installs version 13.0, which then allows me to open and use Photoshop as normal. I proceed to "check for updates" from within the program, and it takes me to 13.0.2 I believe. I can use Photoshop as normal after that.   Here's what I think is funny... I can check for updates to my heart's content after updating to 13.0.x. The program thinks there's no updates available after 13.0.x. The only way my system knows there's a later version out there is if I power down my system and restart it. Then and only then will Adobe Application Manager come up and tell me there's an update available (13.1.2) which, if I chooose to install (and I did), takes me back to the error that I mentioned earlier: "Adobe Photoshop cannot run on this computer becuse this version of Photoshop requires Windows 7 or later". Soooo with all of this said... DOES ANYONE know how the updated version of Photoshop (13.1.2) for Creative Cloud Subscribers checks to see if it's running on a Windows 7 system? For whatever reason, it doesn't think I have Windows 7 after updating to it, and I'm stuck! I know if I contact Adobe Support, they're going to want to uninstall ALL of my Adobe software of which I have alot, and then reinstall everything... and quite frankly, I think all that is a bunch of crap! It's plain and simple... Photoshop works BEFORE the update, and will not open due to this error AFTER the update, so there's some issue with the updating procedure that causes Photoshop to not recognize my Windows 7 system, and I just pray that SOMEBODY out there might be able to help me change some setting on my system that will cause Photoshop 13.1.2 to actually work!
UPDATE: I decided to check the 32-bit version of 13.1.2, and it works! So it looks like this error is limited to the 64-bit version. That just makes no sense at all to me.
UPDATE # 2:
I followed Jeff Wright's advice about checking the installation error log. I had no errors... An error log doesn't even exist in my case. The funny thing is that the 32-bit version works beautifully! After reading this thread, I thought that the problem might be related to my video card driver. Although I don't see any logic to that, I decided to go out to the NVIDIA website and update my driver. The driver I had was only 3 months old. Anyway, I did it. I then uninstalled Photoshop using the Windows 7 uninstall program utility and reinstalled Photoshop. I get the same error message when I try to run the 64-bit version of 13.1.2.. something to the effect of "this computer must be running Windows 7 to run this program." However, the 32-bit version loads and works perfectly. Since I'm now at my wit's end, I decided to uninstall Photoshop again, but this time using the REVO uninstaller utility hoping that somehow that the Windows uninstaller wasn't working correctly. I completely uninstalled it, reinstalled it using Adobe Application Manager and get the same results. As long as I stay at 13.0.x, Photoshop works fine in both the 32-bit AND 64-bit editions, but as soon as I using Adobe Application Manager to update to 13.1.2, the 64-bit program won't run. I just don't understand how the 32-bit version will run perfectly, but the 64-bit version won't. THIS IS DRIVING ME CRAZY !!!

T510 ThinkVantage button and updates software broken after last update 12/1/2010

After last updates I ran on Dec 1, 2010, the ThinkVantage button does nothing. Running the updates and drivers from the control panel flashes the GUI splash screen then closes.
Lenovo really screwed this one up! Now you can't even get the updates to work to fix other issues.
In the event logs I show PC-Doctor errors
The description for Event ID 1 from source PC-Doctor cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(1972) Asapi: (13:00:09:5300)(1972) DEFECT.LOCALIZATION - Error -- Missing String: scriptlets : button1 locale: PCDLocale: language = en, customer = lenovo, variant = ltt
Log Name:      Application
Source:        ThinkVantage Registry Monitor Service
Date:          12/1/2010 12:29:40 PM
Event ID:      0
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      jmw-77
Description:
The description for Event ID 0 from source ThinkVantage Registry Monitor Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Service started
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="ThinkVantage Registry Monitor Service" />
    <EventID Qualifiers="0">0</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-01T17:29:40.000000000Z" />
    <EventRecordID>42737</EventRecordID>
    <Channel>Application</Channel>
    <Computer>jmw-77</Computer>
    <Security />
</System>
<EventData>
    <Data>Service started</Data>
</EventData>
</Event>

Hi and welcome to the forum!
Try uninstalling the PC-Doctor / Lenovo ThinkVantage Toolbox and System Update from Add/Remove programs, do a mandatory restart, thereafter download and run CCleaner, scan for registry issues with it and fix them. Subsequently, manually install both Toolbox and System Update.
Keep us posted with the results.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
  Lenovo Deutsche Community     Lenovo Comunidad en Español
Visit my YouTube Channel

ITunes no longer opening after last update.

ITunes not opening after last update on my main user. Second user is fine however accesses different library.
Computer freezes when attempting to open ITunes. Have also searched for the sync services file but is not located under reveal in folder or go to options.
Apologies I am not the best tech savy person and have read other posts trying to solve the problem. Other posts asked for the following reports.
Any assistance would be greatly appreciated - we are an apple household and this is effecting everything!
Log List ITunes
8/06/2014 2:39:28.757 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunesHelper.27664[421]) Spawned and waiting for the debugger to attach before continuing...
8/06/2014 8:51:05.999 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunes.49488[3827]) Exited: Terminated: 15
8/06/2014 9:04:40.000 pm kernel[0]: hfs: mounted iTunes on device disk3s2
8/06/2014 9:04:40.513 pm mds[40]: (Normal) Volume: volume:0x7fd43483dc00 ********** Bootstrapped Creating a default store:1 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/iTunes
8/06/2014 9:06:34.278 pm sudo[3918]:     root : TTY=unknown ; PWD=/private/tmp/PKInstallSandbox.yTVHam/Scripts/com.apple.pkg.iTunesX.tO4vG4 ; USER=mel ; COMMAND=./Tools/AlertAll.app/Contents/MacOS/AlertAll /
8/06/2014 9:06:46.629 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunesHelper.27664[421]) Exited with code: 1
8/06/2014 9:06:49.536 pm iTunesHelper[240]: _SubscribeForMuxNotifications (thread 0x7fff7ef70310): USBMuxListenerCreate: Connection refused
8/06/2014 9:06:49.536 pm iTunesHelper[240]: _SubscribeForMuxNotifications (thread 0x7fff7ef70310): USBMuxListenerCreate: Connection refused
8/06/2014 9:08:05.643 pm iTunesHelper[4058]: _SubscribeForMuxNotifications (thread 0x7fff7ef70310): USBMuxListenerCreate: Connection refused
8/06/2014 9:11:05.077 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunes.49488[4118]) Exited: Terminated: 15
I was unable to find anything starting with iTunes under User Diagnostic Reports however located several starting with CFPREFSD, this was the latest one
Process:         cfprefsd [4137]
Path:            /usr/sbin/cfprefsd
Identifier:      cfprefsd
Version:         855.16
Code Type:       X86-64 (Native)
Parent Process: launchd [281]
Responsible:     cfprefsd [4137]
User ID:         502
Date/Time:       2014-06-08 21:11:04.973 +1000
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 11
Crashed Thread: 2 Dispatch queue: com.apple.root.default-priority
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: 0x000000000000000a, 0x000000010e0c3000
VM Regions Near 0x10e0c3000:
    Dispatch continuations 000000010d800000-000000010e000000 [ 8192K] rw-/rwx SM=PRV
--> mapped file            000000010e083000-000000010e1be000 [ 1260K] r--/rwx SM=COW /Users/USER/Library/Preferences/*/*.plist
    MALLOC_LARGE           000000010e1be000-000000010e2f9000 [ 1260K] rw-/rwx SM=PRV
Thread 0:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib                  0x00007fff8f0bc662 kevent64 + 10
1   libdispatch.dylib                       0x00007fff963fc421 _dispatch_mgr_invoke + 239
2   libdispatch.dylib                       0x00007fff963fc136 _dispatch_mgr_thread + 52
Thread 1:: Dispatch queue: com.apple.root.default-overcommit-priority
0   libsystem_kernel.dylib                  0x00007fff8f0bbcaa __sigsuspend_nocancel + 10
1   libdispatch.dylib                       0x00007fff964047da _dispatch_sigsuspend + 21
2   libdispatch.dylib                       0x00007fff964047c5 _dispatch_sig_thread + 45
Thread 2 Crashed:: Dispatch queue: com.apple.root.default-priority
0   libsystem_platform.dylib                0x00007fff982c80de _platform_memmove$VARIANT$Nehalem + 254
1   libxpc.dylib                            0x00007fff907cf81e xpc_data_create + 82
2   com.apple.CoreFoundation                0x00007fff90641386 -[CFPDSource acceptMessage:] + 806
3   com.apple.CoreFoundation                0x00007fff90648d67 __handle_synchronize_message_block_invoke + 215
4   com.apple.CoreFoundation                0x00007fff9063fc1a __90+[CFPDSource withSourceForDomain:forRemoteClient:inContainer:user:byHost:managed:perform:]_b lock_invoke_2 + 42
5   libdispatch.dylib                       0x00007fff963fd1bb _dispatch_call_block_and_release + 12
6   libdispatch.dylib                       0x00007fff963fa28d _dispatch_client_callout + 8
7   libdispatch.dylib                       0x00007fff963fc082 _dispatch_root_queue_drain + 326
8   libdispatch.dylib                       0x00007fff963fd177 _dispatch_worker_thread2 + 40
9   libsystem_pthread.dylib                 0x00007fff998cfef8 _pthread_wqthread + 314
10 libsystem_pthread.dylib                 0x00007fff998d2fb9 start_wqthread + 13
Thread 2 crashed with X86 Thread State (64-bit):
rax: 0x000000010e1be040 rbx: 0x00007f9bb24043d0 rcx: 0x0000000000000010 rdx: 0x00000000000fa5fc
rdi: 0x000000010e1fe010 rsi: 0x000000010e0c2fd0 rbp: 0x000000010d7294b0 rsp: 0x000000010d7294b0
   r8: 0x0000000000000003   r9: 0xfffffffef1e41fff r10: 0x00007f9bb2404210 r11: 0x000000000013b040
r12: 0x000000010e1be000 r13: 0x00007f9bb2504b40 r14: 0x000000010e083000 r15: 0x000000000013a60c
rip: 0x00007fff982c80de rfl: 0x0000000000010202 cr2: 0x000000010e0c3000
Logical CPU:     1
Error Code:      0x00000004
Trap Number:     14
Binary Images:
       0x10d5d9000 -        0x10d5d9fff cfprefsd (855.16) <4342939E-DB15-3A1A-BCDE-6B3EF244CAAB> /usr/sbin/cfprefsd
    0x7fff6eedc000 -     0x7fff6ef0f817 dyld (239.4) <042C4CED-6FB2-3B1C-948B-CAF2EE3B9F7A> /usr/lib/dyld
    0x7fff8cc03000 -     0x7fff8cc2cff7 libc++abi.dylib (49.1) <21A807D3-6732-3455-B77F-743E9F916DF0> /usr/lib/libc++abi.dylib
    0x7fff8ee44000 -     0x7fff8ee4bfff libcompiler_rt.dylib (35) <4CD916B2-1B17-362A-B403-EF24A1DAC141> /usr/lib/system/libcompiler_rt.dylib
    0x7fff8ef27000 -     0x7fff8ef2bff7 libcache.dylib (62) <BDC1E65B-72A1-3DA3-A57C-B23159CAAD0B> /usr/lib/system/libcache.dylib
    0x7fff8f0a1000 -     0x7fff8f0a5ff7 libsystem_stats.dylib (93.90.3) <4E51D5B0-92A0-3D0D-B90E-495A1ED3E391> /usr/lib/system/libsystem_stats.dylib
    0x7fff8f0a6000 -     0x7fff8f0c2ff7 libsystem_kernel.dylib (2422.100.13) <498AEBD7-4194-3CF2-AA16-D5D03FFBD8C0> /usr/lib/system/libsystem_kernel.dylib
    0x7fff8f626000 -     0x7fff8f637ff7 libsystem_asl.dylib (217.1.4) <655FB343-52CF-3E2F-B14D-BEBF5AAEF94D> /usr/lib/system/libsystem_asl.dylib
    0x7fff8f638000 -     0x7fff8f686fff libcorecrypto.dylib (161.1) <F3973C28-14B6-3006-BB2B-00DD7F09ABC7> /usr/lib/system/libcorecrypto.dylib
    0x7fff8f879000 -     0x7fff8f894ff7 libsystem_malloc.dylib (23.10.1) <A695B4E4-38E9-332E-A772-29D31E3F1385> /usr/lib/system/libsystem_malloc.dylib
    0x7fff8fb06000 -     0x7fff8fb09ff7 libdyld.dylib (239.4) <7C9EC3B7-DDE3-33FF-953F-4067C743951D> /usr/lib/system/libdyld.dylib
    0x7fff8fb0a000 -     0x7fff8fb0bffb libremovefile.dylib (33) <3543F917-928E-3DB2-A2F4-7AB73B4970EF> /usr/lib/system/libremovefile.dylib
    0x7fff8fb2e000 -     0x7fff8fb33ff7 libunwind.dylib (35.3) <78DCC358-2FC1-302E-B395-0155B47CB547> /usr/lib/system/libunwind.dylib
    0x7fff904b0000 -     0x7fff90695fff com.apple.CoreFoundation (6.9 - 855.16) <A63E680E-E4B2-368B-8564-9DBE0D8DDB91> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x7fff907cd000 -     0x7fff907f1fff libxpc.dylib (300.90.2) <AB40CD57-F454-3FD4-B415-63B3C0D5C624> /usr/lib/system/libxpc.dylib
    0x7fff90e2c000 -     0x7fff90e2dff7 libDiagnosticMessagesClient.dylib (100) <4CDB0F7B-C0AF-3424-BC39-495696F0DB1E> /usr/lib/libDiagnosticMessagesClient.dylib
    0x7fff912c0000 -     0x7fff912c1ff7 libsystem_blocks.dylib (63) <FB856CD1-2AEA-3907-8E9B-1E54B6827F82> /usr/lib/system/libsystem_blocks.dylib
    0x7fff928cb000 -     0x7fff928d5fff libcommonCrypto.dylib (60049) <8C4F0CA0-389C-3EDC-B155-E62DD2187E1D> /usr/lib/system/libcommonCrypto.dylib
    0x7fff9342b000 -     0x7fff9343cff7 libz.1.dylib (53) <42E0C8C6-CA38-3CA4-8619-D24ED5DD492E> /usr/lib/libz.1.dylib
    0x7fff935ac000 -     0x7fff935b3ff8 liblaunch.dylib (842.90.1) <38D1AB2C-A476-385F-8EA8-7AB604CA1F89> /usr/lib/system/liblaunch.dylib
    0x7fff94021000 -     0x7fff94048ffb libsystem_info.dylib (449.1.3) <7D41A156-D285-3849-A2C3-C04ADE797D98> /usr/lib/system/libsystem_info.dylib
    0x7fff94904000 -     0x7fff9490bff3 libcopyfile.dylib (103) <5A881779-D0D6-3029-B371-E3021C2DDA5E> /usr/lib/system/libcopyfile.dylib
    0x7fff94d40000 -     0x7fff94eedf27 libobjc.A.dylib (551.1) <AD7FD984-271E-30F4-A361-6B20319EC73B> /usr/lib/libobjc.A.dylib
    0x7fff94eee000 -     0x7fff94ef3fff libmacho.dylib (845) <1D2910DF-C036-3A82-A3FD-44FF73B5FF9B> /usr/lib/system/libmacho.dylib
    0x7fff94f28000 -     0x7fff94fb1ff7 libsystem_c.dylib (997.90.3) <6FD3A400-4BB2-3B95-B90C-BE6E9D0D78FA> /usr/lib/system/libsystem_c.dylib
    0x7fff9510d000 -     0x7fff9510dff7 libkeymgr.dylib (28) <3AA8D85D-CF00-3BD3-A5A0-E28E1A32A6D8> /usr/lib/system/libkeymgr.dylib
    0x7fff95121000 -     0x7fff95122fff libunc.dylib (28) <62682455-1862-36FE-8A04-7A6B91256438> /usr/lib/system/libunc.dylib
    0x7fff9551f000 -     0x7fff95546ff7 libsystem_network.dylib (241.3) <8B1E1F1D-A5CC-3BAE-8B1E-ABC84337A364> /usr/lib/system/libsystem_network.dylib
    0x7fff957eb000 -     0x7fff959a3ffb libicucore.A.dylib (511.32) <A7CE7DAD-D3AD-36A2-BE4F-25C5F21FADBB> /usr/lib/libicucore.A.dylib
    0x7fff95bf4000 -     0x7fff95bf6ff7 libquarantine.dylib (71) <7A1A2BCB-C03D-3A25-BFA4-3E569B2D2C38> /usr/lib/system/libquarantine.dylib
    0x7fff95c26000 -     0x7fff95c68ff7 libauto.dylib (185.5) <F45C36E8-B606-3886-B5B1-B6745E757CA8> /usr/lib/libauto.dylib
    0x7fff96057000 -     0x7fff9605ffff libsystem_dnssd.dylib (522.90.2) <A0B7CF19-D9F2-33D4-8107-A62184C9066E> /usr/lib/system/libsystem_dnssd.dylib
    0x7fff963f9000 -     0x7fff96413fff libdispatch.dylib (339.92.1) <C4E4A18D-3C3B-3C9C-8709-A4270D998DE7> /usr/lib/system/libdispatch.dylib
    0x7fff96414000 -     0x7fff9641dff3 libsystem_notify.dylib (121) <52571EC3-6894-37E4-946E-064B021ED44E> /usr/lib/system/libsystem_notify.dylib
    0x7fff96a20000 -     0x7fff96a21ff7 libSystem.B.dylib (1197.1.1) <E303F2F8-A8CF-3DF3-84B3-F2D0EE41CCF6> /usr/lib/libSystem.B.dylib
    0x7fff982c4000 -     0x7fff982caff7 libsystem_platform.dylib (24.90.1) <3C3D3DA8-32B9-3243-98EC-D89B9A1670B3> /usr/lib/system/libsystem_platform.dylib
    0x7fff99815000 -     0x7fff99867fff libc++.1.dylib (120) <4F68DFC5-2077-39A8-A449-CAC5FDEE7BDE> /usr/lib/libc++.1.dylib
    0x7fff998cd000 -     0x7fff998d4ff7 libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
    0x7fff9996e000 -     0x7fff9996fff7 libsystem_sandbox.dylib (278.11) <B46E4040-A8C6-3EBC-91F8-F1CB01106614> /usr/lib/system/libsystem_sandbox.dylib
    0x7fff99c2c000 -     0x7fff99c5bfd2 libsystem_m.dylib (3047.16) <B7F0E2E4-2777-33FC-A787-D6430B630D54> /usr/lib/system/libsystem_m.dylib
    0x7fff9a11e000 -     0x7fff9a120ff3 libsystem_configuration.dylib (596.15) <4998CB6A-9D54-390A-9F57-5D1AC53C135C> /usr/lib/system/libsystem_configuration.dylib
External Modification Summary:
Calls made by other processes targeting this process:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0
Calls made by this process:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0
Calls made by all processes on this machine:
    task_for_pid: 6540
    thread_create: 0
    thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=74.9M resident=13.6M(18%) swapped_out_or_unallocated=61.2M(82%)
Writable regions: Total=45.8M written=480K(1%) resident=584K(1%) swapped_out=0K(0%) unallocated=45.2M(99%)
REGION TYPE                      VIRTUAL
===========                      =======
Dispatch continuations             8192K
Kernel Alloc Once                     4K
MALLOC                             28.4M
MALLOC (admin)                       16K
STACK GUARD                          12K
Stack                              65.1M
VM_ALLOCATE                          28K
__DATA                             1080K
__LINKEDIT                         66.2M
__TEXT                             8872K
__UNICODE                           544K
mapped file                        1260K
shared memory                         4K
===========                      =======
TOTAL                             179.2M
System Profile:
Model: iMac12,2, BootROM IM121.0047.B1E, 4 processors, Intel Core i5, 3.1 GHz, 4 GB, SMC 1.72f2
Graphics: AMD Radeon HD 6970M, AMD Radeon HD 6970M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3230554638424353302D444A2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3230554638424353302D444A2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.74.0-P2P
Bluetooth: Version 4.2.4f1 13674, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5690H, 277.5 MB
USB Device: Hub
USB Device: 1861
USB Device: Internal Memory Card Reader
USB Device: IR Receiver
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: iPhone
USB Device: MFC-J6910DW
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: iMac, Apple Inc., 25.1
Also located,
Diagnostic Messages
Powerstats for: iTunesHelper
com.apple.iTunesHelper          11.2.2 (11.2.2)          <D9314C39-EAF4-37E6-B8D8-2731175CD7B2>          /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app/Contents/MacOS/iT unesHelper
Powerstats for: iTunes

...now my computer updated it again. It opened, tried to collect information about the copyright, the an error message popped up saying that iTunes does not work correctly due to any mistake...
Please help me!

No autofill after last update

My Ipod no longer appears in the list when plugged into my computer. As a result the autofill button is gone and I cant update songs to my 1st generation Ipod shuffle. This came about after last update. It's as if the system doesn't recognize my Ipod although I continue to get the message that the Ipod is syncing and the system signals me when the syncing is complete.
My main concern is how do I go about autofilling now?

I said to click on the button NEXT TO (to the right of) the Settings button, which should say "On This iPod" in the current version of iTunes. The Settings screen is what iTunes is currently showing so clicking on Settings again will not change the screen.
In previous version of iTunes, you also clicked on the "tab" next to Settings to get a listing of the shuffle's contents, and the Autofill button. It was just called something else instead of On This iPod (I think it was "Contents"). So the procedure itself has not changed in the current version of iTunes.
I have a 1st gen shuffle, and that's how it works...

Flash CC doesn't start up after last update

Similar Messages

Maybe you are looking for