Flash clock and server time

Hi Guys, desperately need help here!
I have created a flash clock using Actionscript 2.0. I have configured it to fetch the server time using a basic ColdFusion time and date script.
At first the clock worked fine, accept for the afternoons where it would add extra hours onto the time. The clock is now completely out of sync and I have been trying to solve the problem for over two weeks! This clock will be used for a major client so it has to be working perfectly.
I would really appreciate someone having a quite look at the actionscript as im sure its nothing major.
Actionscript - http://pastebin.com/3ny6dBt4
Coldfusion - http://pastebin.com/R2QcWtvE
Kind Regards
Jack

-Thanks for the info, I am running an older version of the firmware.
Actaully, now that I think about it Im running the 4305g with the lates firmware upgrad...So would this only be available in the 4400's?

Similar Messages

  • Ticket creation time and server time is not same.

    Dear All,
    When I create ticket from satellite system it takes time 3 hrs ahead for message and for smart form.I checked with server time which is same as current time. What would be the cause of this time miss match?
    Points would be rewarded.
    Regards,
    Nikhil

    Hi,
    Please check your Timezone using STZAC see how much time difference you are getting.
    See to that your OS Level timezone and SAP Server timezone are same.
    Hope this will solve your problem.
    Feel free to revert back.
    --Ragu

  • Time difference between local time and server time

    Hi Guys,
    I am currently experiencing a time difference of 40 minutes between the local time and the current server time.
    The local time seems to be 40 minutes slower than my current time.
    Path for Local Time : CMC -> home -> servers -> input.file repository sever -> metrics tab.  (Under the category of Installed on machine peacok, there is a local time.
    Question is how can i sync the local time with my current server time?
    Let me know if more info is required.
    Rgds
    Collin

    Hi Collin,
    Under  CMC >Home >Input FRS , the local time shown is current time of BO Server.
    Since CMC is web-based, any date, time value will be coming from BO Server box.
    u2022     In case your system and BO server is in same time zone  then update the date-time of BO Server
    u2022     In case your system and BO server is in different time zone then check with IT team to figure out the BO Server will be maintained in which time zone.
    u2022     If current requirement is specific to some report then you can add 40 min in all date value in report to get the desired result.
    Thanks,
    Sushil

  • Live Update Clock using server time?

    Can anyone point me to a set of coding or extension that will
    allow me to put a live (continuosly updating) clock on my webpage,
    that gets it information from the servers time. For Instance,
    Kaosweaver has a great example:
    click
    here .... BUT, it gets the time from the local computer's info.
    In this situation, someone can just change the time on their local
    computer, and it will change the time on the clock.
    Any ideas?
    Thanks,
    Stephen
    Tallahassee, FL

    Hi there Stephen,
    I could well be wrong here but I suspect you'll need to use
    something like
    server side scripting to achieve this. After all JavaScript
    is a client side
    code so I suspect it will not have the necessary to access
    server resources.
    Something like .asp or .aspx.
    I found this:
    http://www.scripts.com/asp-scripts/calendar-scripts/server-side-clock/
    Hope that's of some help,
    Cheers,
    @ndyB
    "sbsmithfl" <[email protected]> wrote in
    message
    news:evhahp$rh2$[email protected]..
    >
    > Boy, there are a lot of clocks on there. But, none of
    them are doing what
    > I need to. Many thanks. Any other ideas???
    >
    > Thanks,
    > Stephen
    > CaduceusWebs Co.

  • HT1338 i keep getting plug in failure.  I have flash player and quictime. what is going on?

    I am getting a plug in failure when trying to do certain things.  My flash player and quic time are up to date.  What is going on?

    What are the "certain things" you are doing, when the problem occurs?  What is the error message, or indication, that the "failure" occurred?

  • Different time in show clock and show calendar

    Hi all,
    I am having problem with figuring out how to adjust time between show calendar and show clock.
    Basically time difference between this commands is roughly 40 minutes.
    Please look on the screenshot:
    Also my router configurations is:
    ! No configuration change since last restart
    ! NVRAM config last updated at 05:26:42 GMT Mon Dec 8 2014
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname RtrPod1
    boot-start-marker
    boot system usbflash0:c2800nm-advipservicesk9-mz.124-24.T1.bin
    boot-end-marker
    logging message-counter syslog
    enable secret 5 $1$kABI$oyiPktODUDz4Ahdz7pCma0
    no aaa new-model
    clock timezone GMT 13
    clock summer-time GMT recurring
    clock calendar-valid
    no network-clock-participate wic 1
    network-clock-participate wic 2
    dot11 syslog
    ip source-route
    ip cef
    no ip dhcp use vrf connected
    ip dhcp excluded-address 10.110.0.1 10.110.0.10
    ip dhcp excluded-address 10.115.0.1 10.115.0.10
    ip dhcp pool Data
       network 10.110.0.0 255.255.255.0
       default-router 10.110.0.1
    ip dhcp pool Voice
       network 10.115.0.0 255.255.255.0
       default-router 10.115.0.1
       option 150 ip 10.115.0.1
    no ip domain lookup
    no ipv6 cef
    ntp server 192.189.54.33
    multilink bundle-name authenticated
    voice-card 0
    crypto pki trustpoint TP-self-signed-1408351535
     enrollment selfsigned
     subject-name cn=IOS-Self-Signed-Certificate-1408351535
     revocation-check none
     rsakeypair TP-self-signed-1408351535
    crypto pki certificate chain TP-self-signed-1408351535
     certificate self-signed 01
      3082023F 308201A8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
      31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 31343038 33353135 3335301E 170D3134 31323037 31363236
      34325A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
      4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 34303833
      35313533 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
      81009EEF ADD1297E 7CD9BE3E 5BD3798D 10831172 0E025CB9 C7E57188 006DA7E1
      E7B1D9A9 73EC5C53 841413DE E3E4AECD BC80C3D1 CC6BA113 B91CC736 16AF1576
      F37F8437 C9577F4A 0AE72460 1E524E06 74E8DD39 E6952E1F 85547E71 1AD3DE5A
      6DCB12E9 BD953716 13B41148 320EC307 9E45B084 80D0591A E49E8AE2 D87C0716
      86430203 010001A3 67306530 0F060355 1D130101 FF040530 030101FF 30120603
      551D1104 0B300982 07527472 506F6431 301F0603 551D2304 18301680 14880D89
      51BCB633 B6F32385 71C9A39E 72149EAF 99301D06 03551D0E 04160414 880D8951
      BCB633B6 F3238571 C9A39E72 149EAF99 300D0609 2A864886 F70D0101 04050003
      8181001C 63A1BE6C BC96B738 05446ABC ACE19FBF 0054F6B5 100BA758 9A48FAF8
      34B65325 3A374B08 2D8919BF 09ED604F 2F1B7A33 C25CFC7E 6DD55DA6 02CD7E78
      4272ADF7 15158EDE 4A1115A9 06BBDA02 E65E5AC8 559103C4 98EF7371 20568663
      ADF16711 60F8C5E0 ECDB5321 B3ABB8D5 2F42F19E 07D65ADF BABCDE63 50B43773 87AD10
          quit
    username student privilege 15 secret 5 $1$o8qC$cxUuwRjEtfvasjtjfNZAv/
    archive
     log config
      hidekeys
    controller E1 0/1/0
    interface GigabitEthernet0/0
     no ip address
     duplex auto
     speed auto
    interface GigabitEthernet0/0.110
     description Data VLAN
     encapsulation dot1Q 110
     ip address 10.110.0.1 255.255.255.0
    interface GigabitEthernet0/0.111
     description Management VLAN
     encapsulation dot1Q 111
     ip address 10.111.0.1 255.255.255.0
    interface GigabitEthernet0/0.115
     description Voice VLAN
     encapsulation dot1Q 115
     ip address 10.115.0.1 255.255.255.0
    interface GigabitEthernet0/1
     ip address dhcp
     duplex auto
     speed auto
    interface Serial0/0/0
     no ip address
     shutdown
     clock rate 2000000
    interface BRI0/2/0
     no ip address
    interface BRI0/2/1
     no ip address
    interface Service-Engine1/0
     no ip address
     shutdown
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 192.168.15.1
    ip http server
    ip http authentication local
    ip http secure-server
    ip http path usbflash0:/gui
    tftp-server usbflash0:phone/7942-7962/apps42.8-4-1-23.sbn alias apps42.8-4-1-23.sbn
    tftp-server usbflash0:phone/7942-7962/cvm42sccp.8-4-1-23.sbn alias cvm42sccp.8-4-1-23.sbn
    tftp-server usbflash0:phone/7942-7962/jar42sccp.8-4-1-23.sbn alias jar42sccp.8-4-1-23.sbn
    tftp-server usbflash0:phone/7942-7962/cnu42.8-4-1-23.sbn alias cnu42.8-4-1-23.sbn
    tftp-server usbflash0:phone/7942-7962/dsp42.8-4-1-23.sbn alias dsp42.8-4-1-23.sbn
    tftp-server usbflash0:phone/7942-7962/term42.default.loads alias term42.default.loads
    tftp-server usbflash0:phone/7942-7962/term62.default.loads alias term62.default.loads
    tftp-server usbflash0:phone/7942-7962/SCCP42.8-4-2S.loads alias SCCP42.8-4-2S.loads
    tftp-server usbflash0:Desktops/320x196x4/big.png
    tftp-server usbflash0:Desktops/320x196x4/small.png
    tftp-server usbflash0:Desktops/320x196x4/List.xml
    tftp-server usbflash0:Ringtones/Analog2.raw
    tftp-server usbflash0:Ringtones/AreYouThere.raw
    tftp-server usbflash0:Ringtones/AreYouTheref.raw
    tftp-server usbflash0:Ringtones/Bass.raw
    tftp-server usbflash0:Ringtones/CallBack.raw
    tftp-server usbflash0:Ringtones/Classic1.raw
    tftp-server usbflash0:Ringtones/Classic2.raw
    tftp-server usbflash0:Ringtones/ClockShop.raw
    tftp-server usbflash0:Ringtones/Drums1.raw
    tftp-server usbflash0:Ringtones/Drums2.raw
    tftp-server usbflash0:Ringtones/FilmScore.raw
    tftp-server usbflash0:Ringtones/HarpSynth.raw
    tftp-server usbflash0:Ringtones/Jamaica.raw
    tftp-server usbflash0:Ringtones/KotoEffect.raw
    tftp-server usbflash0:Ringtones/MusicBox.raw
    tftp-server usbflash0:Ringtones/RingList.xml
    tftp-server usbflash0:Ringtones/DistinctiveRingList.xml
    tftp-server usbflash0:Ringtones/Piano1.raw
    tftp-server usbflash0:Ringtones/Piano2.raw
    tftp-server usbflash0:Ringtones/Pop.raw
    tftp-server usbflash0:Ringtones/Pulse1.raw
    tftp-server usbflash0:Ringtones/Ring1.raw
    tftp-server usbflash0:Ringtones/Ring2.raw
    tftp-server usbflash0:Ringtones/Ring3.raw
    tftp-server usbflash0:Ringtones/Ring4.raw
    tftp-server usbflash0:Ringtones/Ring5.raw
    tftp-server usbflash0:Ringtones/Ring6.raw
    tftp-server usbflash0:Ringtones/Ring7.raw
    tftp-server usbflash0:Ringtones/Sax1.raw
    tftp-server usbflash0:Ringtones/Sax2.raw
    tftp-server usbflash0:Ringtones/Chime.raw
    tftp-server usbflash0:Ringtones/Vibe.raw
    control-plane
    voice-port 0/2/0
    voice-port 0/2/1
    voice-port 0/3/0
    voice-port 0/3/1
    voice-port 2/0/0
    voice-port 2/0/1
    voice-port 2/0/2
    voice-port 2/0/3
    voice-port 2/0/4
    voice-port 2/0/5
    voice-port 2/0/6
    voice-port 2/0/7
     shutdown
    mgcp fax t38 ecm
    mgcp behavior g729-variants static-pt
    telephony-service
     max-ephones 5
     max-dn 10
     ip source-address 10.115.0.1 port 2000
     load 7962 SCCP42.8-4-2S
     max-conferences 8 gain -6
     web admin system name webadmin secret 5 $1$MafG$7vShhmB.Tlfy22rnE88BK1
     transfer-system full-consult
     create cnf-files version-stamp 7960 Dec 08 2014 05:26:39
    line con 0
     exec-timeout 120 0
     password cisco
     logging synchronous
     login
    line aux 0
    line 66
     no activation-character
     no exec
     transport preferred none
     transport input all
     transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
    line vty 0 4
     exec-timeout 120 0
     password cisco
     logging synchronous
     login local
     transport input telnet ssh
    line vty 5 15
     exec-timeout 120 0
     password cisco
     logging synchronous
     login local
     transport input telnet ssh
    scheduler allocate 20000 1000
    end
    And my switch configuration is:
    ! No configuration change since last restart
    version 12.2
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname SwPod1
    boot-start-marker
    boot-end-marker
    enable secret 5 $1$LDXy$1QdQ73kHv.8sQenQNMq19.
    no aaa new-model
    clock timezone GMT 13
    clock summer-time GMT recurring
    system mtu routing 1500
    authentication mac-move permit
    ip subnet-zero
    no ip domain-lookup
    crypto pki trustpoint TP-self-signed-2133227136
     enrollment selfsigned
     subject-name cn=IOS-Self-Signed-Certificate-2133227136
     revocation-check none
     rsakeypair TP-self-signed-2133227136
    crypto pki certificate chain TP-self-signed-2133227136
     certificate self-signed 01
      3082023F 308201A8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
      31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 32313333 32323731 3336301E 170D3933 30333031 30303030
      35385A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
      4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 31333332
      32373133 3630819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
      8100B71D E6CDD16E D6FEDB25 EC976368 7925A2F8 75EE3EF0 D4C371DA 4B5539BB
      E3A9552F DE35F37B 45A2C5C4 30FEF8D7 C3C5C489 C08C8A90 B415D331 F4653100
      DC1E0ECE D93B2BF5 339C7B3A D170B80A AFEE8DA9 A82263F9 6324F8FA 94BB253E
      7B0B45D6 81E39078 1607DED1 85C69650 AB7D7419 96604F65 D9204BC8 1BC259BB
      6D0B0203 010001A3 67306530 0F060355 1D130101 FF040530 030101FF 30120603
      551D1104 0B300982 07537750 6F64312E 301F0603 551D2304 18301680 14C16878
      2994DA55 82E0FAD0 046CED6D 0EBDA0EE AA301D06 03551D0E 04160414 C1687829
      94DA5582 E0FAD004 6CED6D0E BDA0EEAA 300D0609 2A864886 F70D0101 04050003
      81810090 C6829BAE 9B2A3A31 2A32C1FB AC7946E5 287A43B6 EC9F31D5 13296A2E
      1810E5EB 2503617C C4CCDF9D 421E2372 E94A8BFA D73AB361 46BF80E4 B2C3E828
      6DB62E7F DE5E0F6F B93A885E 3A5E13CA 6D95426C 9494C22D 005E8BC9 C6C012D5
      DF186CFB 194BC416 89566F98 0C21CC79 D477022C A4845D94 EE0FC299 7C7710C5 32F314
      quit
    spanning-tree mode pvst
    spanning-tree etherchannel guard misconfig
    spanning-tree extend system-id
    vlan internal allocation policy ascending
    interface FastEthernet0/1
     switchport trunk encapsulation dot1q
     switchport mode trunk
    interface FastEthernet0/2
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/3
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/4
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/5
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/6
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/7
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/8
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/9
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/10
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/11
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/12
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/13
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/14
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/15
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/16
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/17
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/18
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/19
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/20
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/21
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/22
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface FastEthernet0/23
     switchport trunk encapsulation dot1q
     switchport mode trunk
    interface FastEthernet0/24
     switchport access vlan 110
     switchport mode access
     switchport voice vlan 115
     spanning-tree portfast
    interface GigabitEthernet0/1
    interface GigabitEthernet0/2
    interface Vlan1
     no ip address
     shutdown
    interface Vlan111
     ip address 10.111.0.2 255.255.255.0
    ip default-gateway 10.111.0.1
    ip classless
    ip http server
    ip http secure-server
    ip sla enable reaction-alerts
    line con 0
     exec-timeout 120 0
     password cisco
     logging synchronous
     login
    line vty 0 4
     exec-timeout 120 0
     password cisco
     logging synchronous
     login
    line vty 5 15
     exec-timeout 120 0
     password cisco
     logging synchronous
     login
    ntp clock-period 36028575
    ntp server 10.110.0.1
    end
    Any help will be highly appreciated.

    Have you tried using "ntp update-calendar"?

  • Update time and date with server time..?

    Hi.. All
    every login ,flash get server time from php. how can i update  time and date in flash..?

    I'm going to only show the month example, the rest is fairly straightforward:
    <?php $month = date('n'); ?>
    var date:Date = new Date();
    trace(date);
    date.setMonth($month);
    trace(date);

  • Playback of flv using Flash Player 10.1 and Flash Media Interactive Server jerky.

    Greetings:
    Thanks for taking time to read this.
    Here is our problem:
    Playback of flv using Flash Player 10.1 and Flash Media Interactive Server jerky.
    Playback ok if using Flash Player 10.0 with Flash Media Interactive Server.
    1. Record live using Flash Media Interactive Server
    2. Attempt to play back resulting flv using Flash Player 10.1 and Flash Media Interactive Server.
      Video plays ok for a few seconds and then plays faster than as recorded -- very jerky.
    Audio plays at normal rate.
    OS: Windows 7 64bit (two different machines. All updates installed.)
    Web browser: FireFox 3.6.10 and IE8 8.0.7600.16385
    Flash version: 10.1.85.3
    Tried with hardware acceleration on and off.
    Note: Also had another person report the same thing on a Mac.
    We had been using Flex 3, so we tried building with Flash Builder 4 – had the same problem.
    This is a show stopper for us.
    Tried using Wowza and everything worked.
    We’re dropping FMIS and switching to Wowza.
    If someone can suggest something else to try, we would appreciate it.

    Hi Greg,
    So if I understand correctly, your findings are:
    Flash Player 10.1.85.3 + Flash Media Interactive Server = Jerky Video
    Flash Player 10.0.x.x + Flash Media Interactive Server = Smooth Video
    Flash Player 10.1.85.3 + Wowza = Smooth Video
    And what about Flash Player 10.0.x.x + Wowza?
    Also, if you could check the network traffic to confirm if it's Flash Player causing the issue or it is receiving it like that from FMIS.
    Cheers
    --Vikas

  • Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

    Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

    ... when i click go - connect to server, it comes up with connection failed.
    If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that.

  • My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

    My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

    There is nothing wrong with your Dell, it will work fine with any MacbookPro. I have been using Dell displays for over 12 years with many different Mac models. I have two 21" Ultra Sharp displays working side by side to design a Keynote presentation right now.
    The issue your having is with the way Keynote  takes control of the video output to both displays, it sends the presentation signal to one and the presenter display to the other, this is set up in;
    Keynote preferences > Presenter display.
    If you want to show a wesite or another app on  either display,  use application switcher:
    press the the  command key on the keyboard, then the tab key; a row of applications will show what applications are running, choose which one you want to show. Use command  > tab to return to Keynote.

  • Remote access VPN to server from outside and server reach internet on the same time

    Dear,
    I have problem in my ASA 5515-X , when i make Remote access VPN to servers in inside zone the internet connection disconnected in the servers, or when i have internet in servers, the remote access cant reach servers.
    the configuration for server as static NAT for each server, and the connection of VPN is to another public IP but in the same subnet of NAT ip.
    server1 : 10.10.10.2 nat to 5.6.7.8
    server2: 10.10.10.3 nat to 5.6.7.9
    server3: 10.10.10.4 nat to 5.6.7.10
    VPN connection to 5.6.7.12
    is there any solution for this senario, remote vpn to servers and the same time the servers have internet readability for download updates .. etc

    Hi,
    So it seems that the problem is with lacking a NAT0 configuration
    You could modify the below configuration to match your networks/IP addresses used. In the below configuration I presume that you have interfaces "inside" and "outside".
    object network SERVER-NETWORK
     subnet <server network address> <network mask>
    object network VPN-POOL
     subnet <vpn pool network address> <network mask>
    nat (inside,outside) 1 source static SERVER-NETWORK SERVER-NETWORK destination static VPN-POOL VPN-POOL
    Just insert the correct address related information and change the "object" and interface names if required.
    This configuration will tell the ASA that no NAT will be performed for traffic between the VPN-POOL and SERVER-NETWORK. The NAT configuration is bidirectional. With this configuration the Static NAT configurations will continue to work for the servers Internet traffic and this NAT0 configuration will be applied only to the VPN Client traffic.
    Hope this helps :)
    - Jouni

  • Time Capsule flashes amber and loses connection at least once a day

    Hello,
    I got my Time Capsule a month ago. I had an old one from 2008 which I gave to a friend, so it was time to upgrade. I have no idea what's going on, but the Time Capsule flashes amber and I lose my Internet connection at least once a day, sometimes two or three times within a few hours.
    Is anyone else experiencing this? Any idea how to fix it?
    If it matters, I'm on a mid-2010 MBP running OS X 10.8.5.
    Thanks!

    You and everyone else.
    https://discussions.apple.com/thread/5140686?tstart=0
    It is not stable firmware.. or has issues .. with some modems.. or is just faulty.. pick one or two choices.
    There is no fix because this is really a bug.

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

  • Server Time and Local Time (Dreamweaver) Off By 1 Hour

    How can I get Dreamweaver to show me the correct time stamp on my files on the server and my local machine? When I telnet into my server, the date and time stamp on all files is correct. My server time is set properly to ET (GMT-5). My local machine's time is properly set. I asked my sysadmin if PureFTP has any timezone settings and I was told by the sysadmin that all my server times and timezones are accurate. My sysadmin said that Drwamweaver is the culprit.
    I have lived with this for a long time, but it is extremely annoying and I would like to fix it.
    I searched high and low in the Dreamweaver option settings for some sort of timezone setting or offset -- found nothing.
    Has anyone experienced a 1-hour out-of-sync issue between a file's actual time stamp on the server and what Dreamweaver shows it as in the Remote/Local Files View?
    Thanks.

    During Daylight Savings Time.
    http://forums.adobe.com/message/3545349#3545349
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup.

    I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup. (which I now know was wrong). However, when time machine tried to restore it said there was not enough room to do a backup. It seems that it did a half backup because some essential  files such as system profiler are now missing. Can I undo this restore...? What can I do to fix this

    You need to do a full system restore, per Time Machine - Frequently Asked Question #14.
    If that sends a message, please note the exact wording.

Maybe you are looking for

  • SRM 7.13 Web-Dynpro custom configuration is not getting delegated

    Hello Experts please help to solve my issue: SRM 7.13 I created a new configuration of a Wed-dynpro view to replace the original one. But for some unknown reason it is not getting delegated on the SRM web. Technical Help shows the original WDCONFIGUR

  • 10.1.3 on Fedora Core6 - Error

    Hi All, I am installing oracle 10g AS (10.1.3) on Fedora Core 6 but when installation process reaches to 89% (Linking 'oracle Net required support Files 10.1.0.2.0'), one error diolog box apear on installation screen showing the following error. Erro

  • Bridge stopped display labels in thumbnails CS4

    Today, Bridge CS4 stopped displaying labels (coloured ones) in thumbnails. It still keeps track of them, they show up in the large size display on the right and I can filter by label. I checked preferences and I have display labels on thumbnails chec

  • Sun recommended Java EE project directory structure?

    Hello, It's said that there's a Java EE project directory structure recommended by Sun. How to get it? I find a link as following, http://java.sun.com/blueprints/code/projectconventions.html The article is my want? Thanks! a cup of Java, cheers! Sha

  • How to stop running Backup process by BRTOOLS ?

    Dear All, We r using HP-UX -- OS for SAP system. We run backup process by DB13 TC. once the backup started, we can not log in  till backup process ends. If we want to stop this process in between then how to stop BACKUP process safely ? We have to us