Flash doesn't work - at all. Not even after reboot.

Flash plugin crashes the Plugin-container.exe process, causing Firefox to "hang." Flash and Firefox are up-to-date (as of minutes ago) and hardware acceleration has been enabled/disabled to no avail. There are multiple instances of plugin-container (all of which must be force-quit) and even after reloading a page flash won't work, instead freezing up firefox.
What can I do next to figure out why this is happening and stop it?

That was the first thing I did, but it seems a new update has been released since I first posted. Thank you.

Similar Messages

I recently connected my iPhone 3GS to my computer, for the new update 3.4.5, but it didn't load at all, not even after 3 hours.. so i tried to disconnect to phone, but the loading meter is still there, like it has frozen, what should I do ?

I recently connected my iPhone 3GS to my computer, for the new update 3.4.5, but i didn't load at all. Not even after 3 hours..
so i tried to disconnect the phone, but the loading meter is still there like it's frozen can't push any button or anything at all.. what should i do?

Restart your iPhone by holding down the on/off and home buttons until your see the Apple logo.

I have an ipad wi-fi cellular 32gb. Died in march after 3 month has been replaced now the replacement has died, holding home key and button on top doesnt work at all, not even if left over night and the next day and night, still nothing.

I was given a ipad after xmas 2012. Within a month it was freezing up and returned to apple to replace. It was sent straight back to me saying it was fine. The day I got it back it was faulty again only this time it was worse, it was switching itself off and turning itself back on when it liked. A back up and restore was completed AGAIN. 3 weeks later it was sent straight back to apple to be replaced, this time a higher authority from apple in brisbane said it was to be replaced immediately. Which it was. Then within 6 weeks this ipad the replacemetn ipad has started having issues by turing itself off. Now it has completely shut itself down and off. Charge was at 81%. I put it on charge as maybe the %% was wrong. A few hours later, tried turning it on by holding top button, nothing happened I have also held down top button and home key for 10 sec, nothing so I tried longer nothing happened. Rang apple support and they have suggested holding top button down for 10 sec then add home key for 10 sec both top button and home for 10 sec then they top button off followed by leaving home key for 10 sec by itself. This did not work. I have tried this again this morning and again at lunch at work and again now tonight. Still nothing at all. Even plugging it into the computer doesn't do anything at all. Has anyone else come across this at all with two ipads doing exactly the same thing. My power points are fine, I've had an electrician check them and my computer is fine aswell. I stumped as to what can be going wrong. Thanks

Is your battery dead or alive?
If the battery is dead, we must find out if it is:
1. Charger problem
2. Cable problem
3. Docking port problem
4. Wall socket problem

Flash doesn't work at all in Firefox 3.5 using Ubuntu Linux

Hello and Help,
I have not been able to have any flash capability using Ubuntu Jaunty or now Karmic. I think this started when I upgraded to FF3.5. But I have exhausted all the fixes in Ubuntu and FF and I see in these forums these problems are not rare. I have installed and un installed and reinstalled. Whether I reinstall with it having been uninstalled or not, I get an error message that a newer version is already installed. I get this even after completely uninstalling and rebooting.
I am very frustrated a bout the flash problem and hope there are some suggestions. Thanks.

Can you start in Firefox safe mode? See [[Safe Mode]]

Just updates itunes and now it doesn't open at all, not even an error message

I just updated itunes and now it doesn't open, no error message comes up, it's like i never even clicked it, well for a second the 'in progress' circle spins
tried restarting the computer, that wasn't any help
cleaned up registry with ccleaner
even opened up programs and features and right clicked it instead of uninstalling it i clicked repair, no help either
please anyone have a solution?

try with this one
uninstall all the apple application S/w from your pc,
Reboot it
Now download a fresh itunes from apple and try installing
Reboot it

How come my iMessages aren't sending anymore I have a iPod touch 5th gen. It was working and then like 5 minutes later it would not send any messages it always said not delivered even when I press retry and it doesn't send at all I even updated my iOS.

How come my iMessages aren't sending anymore I have a iPod touch 5th gen. It was working and then like 5 minutes later it would not send any messages it always said not delivered even when I press retry and it doesn't send at all I even updated my iOS to iOS 7.04 to see if it will send my iMessages but it won't. I tried to send a message to anyone but it won't work even when before I would be able to send messages but something weird happened that made my messages not delivered. Is there any way I change fix it?

iOS: Troubleshooting Messages

X-fi Extreme Gamers not in IRQ list, doesn't work at all.

9X-fi Extreme Gamers not in IRQ list, doesn't work at all.O Lo mates,
my specs:
Intel C2D E8500
Gigabyte GA-EP45-DS3R
Club3D ATi 4870 52MB
2GB OCZ
2 WD Raptors connected to onboard raid controller
X-Fi in PCI slot
my problem:
The X-fi isn't working as it should. It's not getting detected in bios / POST so it can ofcourse not be working in any OS (currently running Win7 7068
I used to own a AMD 2500 / Asus A7N8X-E deluxe, and it used to work, but when I upgraded to a C2D E6600 / DFI Infinity it only showed up 3 times in my IRQ list / OS. This ofcourse is to blame to Creative, because they dont care about the PCI standard and didn't implement IRQ resource sharing in the Extreme Gamer card. After upgrading to my current setup (listed above) it's still not working at all, even though I tried disabling all onboard devices I dont use, and manually mapped IRQ channels to the PCI ports so they wouldnt share.
The X-fi is fine, I recently put it in another pc with another brand motherboard, and it was detected instantly. Guess the guy who owns that pc had some luck with his motherboard don't feeling the need to share IRQ's at that particulair moment... its like Russian roulette.
Is there anything i can do to get the soundcard to work even though it doesn't implement the PCI standards and therefore in my opinion failed as a soundcard and as a brand as a whole?
Greats,
eXistenZ
Message Edited by existenZNL on 06-24-2009 02:34 PMMessage Edited by existenZNL on 06-24-2009 02:35 [email protected]

= Hey mate:
Havent seen your exact bios, but if you have a setting in it, called? reset [color="#000080" size="3">Extended System Configuration Data.
Then that might shuffle your bios, per se and then let that card be redetected. I used to use that on my systems when swapping one single part in order to get all the IRQs to shuffle around again, and give one to my card. Do you remember when the magic number to give to your Creative card was IRQ 5, DMA Low of , DMA High of 5, address of 220 and port of 330? Well that is how I used to get my system to shuffle my printer ports and modems in order to bump that sound card to get the correct addresses. Also check to see if the edges of your sound card are blackened. Wipe them with your fingers and see if there is an ashy burned residue. This will tell you if that card has been electrically damaged, or oily/dirty. Also the backlplates on some sound cards are slightly bent and your sound card will fit into its slot, but not all the way. A hair off and that card will be picked by your system every couple of boots.
Try this and let me know how it goes for you.

HT5622 The Game Center used to work with my Apple ID before I updated to iOS 7.4, I used to play multiple player with EA Real Racing 3 game but it doesn't work at all and every time I tried to go to the Game Center it's just blank, even to the settings no

The Game Center used to work with my Apple ID before I updated to iOS 7.4, I used to play multiple player with EA Real Racing 3 game but it doesn't work at all and every time I tried to go to the Game Center it's just blank, even to the settings nothing!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Game Center and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

My iPhone 4s doesn't work. i can not swipe to open it or to even turn it off. what can i do??????

my iPhone 4s doesn't work. i can not swipe to open it or to even turn it off. what can i do??????

I would attempt a reset. This is done by holding both the powerbutton and the home button for about 10 seconds for it to restart.
When it boots back up, test the issue. If the issue persists, I would then recommend a restore through iTunes on a computer, set up as new, and test again. If it's now working, i'd recommend to restore from your last back up see if it resolved your issue.
Hopefully the first reset solves it, in most cases it does.
Regards

Q10 I turn Camera Flash On but it Doesn't work IN ALL MODES

Q10 I turn Camera Flash On but it Doesn't work IN ALL MODES

I know, especially stupid that it doesn't work in stabilisation mode as its often that mode used in lower light situations that would benefit from the flash... have no idea why BB doesn't allow US to chose when we want a certain function.

My new iPhone 4 doesn't work at all

You are definitely not alone with your issues. I'm on my second iPhone 4 unit, and am still having the same problems. I've had proximity sensor insanity, battery draining after 8 hours of stand-by (NO USE, just sleeping) to the point that my phone goes into a coma and has to be plugged in to be revived, the grip of death dropping calls....
But the single most irritating and infuriating problem is the signal strength/reception fluctuation. I share a house with two iPhone 3Gs users, and I had an original silverback iphone until July 2010. They all work fantastically well with no issues when I'm at home (where I am just about 24/7, since I work from home). *_My new iPhone 4 doesn't work at all.*_. Signal strength is all over the place. I did a test where I sat watching the bars showing signal strength for five minutes. In that time, I saw it switch from E (edge?) with full bars to 3G with full bars to 3G with 1 bar to 2 bars to 4 bars to 1 bar to "Searching." Then back to 3G, with degradation of bars from 3 to none, then E network appears again, this time with full strength. This all with the phone sitting on a table, not being touched by human hands.
It seems that my iPhone is constantly switching actual physical networks, and as a result signal strength is all over the place from one 30 second period of time to the next. This drains the battery like crazy, and means that all incoming calls go to voicemail--usually without my phone ever ringing.
The 3G phones in my house work great. The 1st G iPhone I have had since the week it came out worked great (though its battery doesn't hold much of a charge anymore, after three years). On my new IP4, games are awesome. The videos and photos are amazingly clear and high quality, and editing on the phone is out of sight. iPhone Apps rule. MobileMe syncs my contacts quickly and easy. The only thing I love more than the iP4 features is my iPad--it rocks.
Everything works on my IP4 at home BUT THE ACTUAL TELEPHONE FUNCTIONS. This is unacceptable. In late August, after two weeks in which I had 4 minutes of phone use, the nice folks at the Apple store switched me to a new phone, no questions asked. The phone worked so much better, I could send texts and place calls most of the time (this was now the first part of September)...except that now that I was using my IP4 to make phone calls, I started having a problem with the proximity sensor during those calls. I'd be talking and my cheek would mute the phone, turn on speaker, open contacts and edit info (with gobbledygook), and of course, hang up on people.
So around Sept. 18 I was told by Apple phone support to update to iOS 4.2, restore as new, and do two complete power up and drain down cycles. This would fix the proximity sensor and any other issues.
Well, I would love to see if iOS 4.2 actually did fix the PS, but I can't get the signal strength to stabilize long enough to have an actual phone conversation. I'm back to watching the signal strength go up and down at random (with me touching/holding it carefully to avoid grip of death, and also when I leave phone on the table with screen lock off --no touching). It is back to switching between E network and 3G and varying strengths of wi-fi from my home network. This eats up battery from 100% to low enough to turn off in under 10 hours of standby (usually 6-7). Essentially, my IP4 is back to being unusable as a phone.
So I did another long, involved call to Apple tech support on 9/18. They tell me that I have to turn off wi-fi, turn off 3G, turn off push/fetch and notifications, shut all apps (no multi-tasking) and do everything but switch my phone to airplane mode--and see if the battery holds up for 24 hours in standby. If that didn't work, I should restore from new, but not load any contacts or network or data or anything--just leave it as it would be out of the box new.
As a test, I turned everything off as advised: 3G, wi-fi, push, etc. Now my battery life is back to normal, where I can have the IP4 on stand-by for up to two full days before needing a recharge. Fabulous. BUT IT'S NOT A SMART PHONE if I have to turn off 3G, turn off wireless, and not use email push and so forth.
I'm so frustrated I could scream. I'm quickly coming to the conclusion that there is a significant flaw in the new iPhone. Or perhaps it is just an issue for iPhone 4 users in areas where the signal strength is marginal, or where there are two types of overlapping network coverage (E and 3G in my case). I know that the networks themselves are in good condition--though I'm in a semi-rural area, the state capital is 4 miles away, and I know they have a new tower and good coverage for the politicians and power brokers around town. The phone coverage area I live in has Edge network in the south part of the network area and 3G in the north part, which is the state capital. I'm right in between. Could this be the problem? AT&T says no, it's Apple's fault.
Message was edited by: HighSierra

So what to do besides complain? Troubleshoot?
I just wonder if all of us who have had chronic signal strength and "Searching for network" issues that totally drain the battery might have something in common, despite being all over the world? I'm using wi-fi 95% of the time, and live in a semi-rural area with overlapping networks run by same carrier. Apple folks hinted that maybe in my area the network usage is nearing capacity (resulting in getting kicked off of 3G and down to E as new calls are placed that strain capacity). They also hinted there could be interference from mountains or other objects. But here's the thing--3G phones work fine, and my IP4 works fine when I'm away from home, usually in the capital city on strong 3G network. (When I say "works fine I mean the signal is good and calls go through, I haven't tested battery drain away from home yet).
I have to conclude that the problem is the IP4 itself--something about the hardware or the software (namely, the way it connects to the phone network) is horribly wrong. Other folks who live in urban areas or with strong networks that (likely) aren't over-utilized don't seem to have this issue. After reading through these pages, it also seems the wi-fi may be a major culprit in draining the battery and in varying signal strength (this is from Apple phone support, which said that varying signal strength and the constant pinging off the home wi-fi is creating a "power struggle" and keeping the phone constantly looking for the best connection option). Mind you, 3G iphones on the same home network have no problems whatsoever.
So while I'm not a technical expert, it seems like the problem HAS to lie in the differences in the way the IP4 connects to the cellular and/or wi-fi network. And since the connection/signal strength problem was "resolved" on my replacement phone, but then "broken" again by the software update of iOS 4.2, I'm leaning toward this being a software issue. I've offered to help Apple troubleshoot, and I'm trying to be patient--because the IP4 is a work of art and I've never had an issue with an Apple product before. But all they want me to do is restore, restore, reload, restore, and then drive 1 hour to the nearest Apple store (in Reno, NV) and get a new phone...and start the whole process over again. I don't have time for this, I need my phone back.
I'm this close to trading in my beautiful but flawed IP4 for a 3G. Maybe I should just get a new battery for my original iPhone from 2007?
I understand that Apple can't test for every possible variable of use all over the world, but they don't even seem to acknowledge that they have a problem with the IP4 that will not be resolved by replacing it with a new unit. They want me to believe it's a fluke, or it's just me...but I've been combing these threads and see a lot of people reporting the same issues I am--battery drain and wildly fluctuating signal strength issues, wi-fi problems, and dropped calls. Can't someone get on this? Because otherwise Apple is going to have to admit that their IP4 is not a good solution for people who live in areas of less than perfect signal strength or use wifi or whatever demonic combo I have in my home/work setting.
Or people will have to do what I have done--if you who want the cool IP4 non-phone features, you will have to dumb down your IP4 in order to have it be even moderately useful as *a phone.* For $599 I expected better.
My (temporary) workaround?
To spare the battery:
*Turn off wi-fi (which *****, because now I have to burn minutes when I'm at work using the email, downloads, safari, etc--and it's E network, so it's SLLOOOOOOOW)
*turn off push and fetch, have mail get new messages manually
*turn off data roaming
To keep the signal somewhat stable (making it easier to complete calls and spare battery)
*Turn off 3G (this leaves me on E network--fabulous, I had that with my 3 year old iPhone)
*grip IP4 between two fingers placed at the top of the phone, away from death zone. Tough for us lefty phone users.
*pray the free bumper will a) come soon and b) help. I'm not optimistic.
To keep proximity sensor from going nuts and dropping calls, muting, turning on speaker etc:
*use headset or bluetooth (unless you are also having one of the known bluetooth issues!)
*keep phone pressed to one ear and don't move it a millimeter. Don't shift sides, don't hold phone with your shoulder, just keep it to one ear and talk fast).
I'm about out of patience. I understand that lots of folks have and love their IP4s. I'd love to be one of those people. I'm open to suggestions and have spent many hours on phone with tech support, restoring my phone, reloading data and apps--there has to be a better way.
Sorry for the thread-jacking, but someone from Apple has got to be following these threads--help us!
null

Mac Mail Issue: I was having trouble sending to hotmail accounts from my Earthlink account, they had me go into Mac Mail preferences and make changes, now Mac Mail doesn't work AT ALL - any help changing the settings back to correct Mac Mail settings? I c

I was having trouble sending to hotmail accounts from my Earthlink account, they had me go into Mac Mail preferences and make changes (because they claimed it was Mac Mail's fault, even though the hotmail error code said it's because Earthlink is blocked by hotmail), now Mac Mail doesn't work AT ALL - any help changing the settings back to correct Mac Mail settings? I can provide a transcript of the entire tech chat session, if that will help...

both apostrophes are used correctly, thanks
doesn't = does not (this is called a contraction)
it's = it is
Mac Mail's fault = possessive
any help with the actual issue? thanks!

The accelerometer doesn't work at all please need help

Well the problem is that the accelerometer doesn't work at all in my ipod touch 3G it's with the ios4.2.1 and it used to work normally but now just doesn't react to te moves please need help

Thanks for the Welcome. After using macs for such a long time. This is my absolute 1st problem.
Here's whats in the log:
5/15/08 10:52:19 PM Mail[133] Unknown class ASExtendedOutlineView in Interface Builder file.
5/15/08 10:52:19 PM Mail[133] Unknown class EditingTableColumn in Interface Builder file.
5/15/08 10:52:20 PM Mail[133] * -[NSTextFieldCell minimumWidth]: unrecognized selector sent to instance 0x8db670
5/15/08 10:52:20 PM Mail[133] * -[NSTextFieldCell minimumWidth]: unrecognized selector sent to instance 0x8db670
Stack Trace: (
2512178932,
2475804524,
2512208056,
2512201400,
2512202056,
53820,
53492,
51728,
49036,
2512235268,
2517195632,
2517160308,
2517158680,
35100,
34644,
32612,
29152,
18456,
2501752236,
2511731368,
2443453352,
2443452876,
2443452428,
2517377984,
2517376392,
2517350980,
2517156936,
993392
When I go to Window->Message Viewer from the menu bar....This is what i get and I can't even close it. I have to force quit mail app completely. I just installed AmunRaa2.0 (it's a theme to change the look for low light consumption. I didn't realize but I installed a a file called MailFix which is supposed to be the fix not the actual installer. I am including the file as well.
/Users/paulkola/Desktop/screen-capture.png
/Users/paulkola/Downloads/untitled folder/Installers/Mail Fix.zip

My home button doesn't work at all, what should I do to close my apps?

The home button on my iPod doesn't work at all, even wen I press on it really hard. Any suggestions on what I should do?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

IPhone 4s glitches, is cracked, and camera flash doesn't work. What is the cost to exchange for a new one?

Front screen of my iPhone 4s is cracked, it freezes/lags, camera flash doesn't work, and every time you press a bit harder on the front screen red and grey vertical lines appear. I have had it for more than a year now, so how much will it cost for me to replace it?

These prices are for the U.S.
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model          Out-of-Warranty Service
iPhone 5          $229
iPhone 4S          $199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone          $149
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above. This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

Flash doesn't work - at all. Not even after reboot.

Similar Messages

Maybe you are looking for