Flash Error When Combining Files

In Acrobat XI Pro, when combining two or more PDFs in to a single file, i recieve and error to say to view the content i must download flash.  Ive checked and we are running the latest version.
The OS on the device is Windows 8.1 and it is patched for the latest version of flash inside the OS, even when trying to go to the link provided it just says that it is already installed.  Thanks

Hi reddamo,
Adobe Acrobat no longer bundles a Flash Player for the purpose of rendering Flash technology content within the pages.
For this, you need to use a separate Flash Player. Please refer this kb file to download the Flash Player:
Acrobat Help | Flash Player needed | Acrobat, Reader XI
Regards,
Anubha

Similar Messages

  • File conversion error when combining files

    Hello,
    I am using Adobe Create to combine several files (both word and pdf) into a single pdf document.  I have done this several times in the past with no problems.  However today it won't allow me to combine any documents which are already in pdf format.  The system generates an error for each of these documents as: "Conversion Failed".  I am clearly not trying to convert them, but rather to combine them...  Any ideas?

    Hi gina_hall_7848,
    If you're combining both Word and PDF files into PDF, there is some conversion happening (with the Word docs, as they're converted into the combined PDF file). If you're getting the error when combining only PDF files--that's another story. It could be that one or more of the files that you're combining isn't in a supported format, or that Adobe PDF Pack is timing out before it can complete the conversion.
    Does the error occur regardless of what files you try to combine?
    Best,
    Sara

  • Error when Combining Files (Acrobat XI & Office 2010)

    I have a user who is getting an error every time she tries to combine files on her computer.
    Pdfs will combine just fine.
    Pdf + MS Office file types fail.
    Combining two MS Office file types fail.
    A side issue, maybe related, is that the Acrobat tab in her office applications errors when she attempts to "Create PDF".
    I've uninstalled / reinstalled, and rebooted.
    System is Win 7 running Office 2010 w/ Acrobat XI.
    Any help would be greatly appreciated.
    Thanks!

    I get this error.
    The user is logged in as an admin of their machine and I haven't set any restrictions that should cause this.

  • Unable to open the document when combining files.

    We have a user that gets an error when combining files. It says
    Unable to open the document:
    <Filename and path>
    Please check to see if you have read permission for the above file.
    Retry and cancel buttons.
    We get this error on every subsequent file, it works on the first one after the computer starts.
    This computer has Windows Vista Business with SP2, Adobe Acrobat X with the latest patches.
    It doesn't matter if the files are local or on a network drive, the same always occurs. I have cleared
    all user and system temporary files, re-installed, verified the Acrobat Add-In for Word 2010 is active,
    verifed the PDF printer is working fine. It only happens when trying to combine files. I have given the
    user local administrator privilidges, tried with my account that has domain admin priviledges, no luck.
    I really need some suggestions...
    Thanks,
    Tom

    I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed.
    This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok.
    They said an update to correct this issue will be coming within the next quarter.
    TP

  • Error (file skipped) when combining files

    Getting an error message on some files(error file skipped)@ when combining files, the properties of the files with errors are the same as the files which are okay. Anyone got a fix for this?

    No the the files aren’t protected. But I solved the problem by copying the files to another folder.
    Seems like another process was still using the files(strange but that’s data for you)
    Fra: Bernd Alheit
    Sendt: 6. august 2014 18:52
    Til: Douglas McGaw
    Emne:  Error (file skipped) when combining files
    Error (file skipped) when combining files
    created by Bernd Alheit<https://forums.adobe.com/people/Bernd+Alheit> in Creating, Editing & Exporting PDFs - View the full discussion<https://forums.adobe.com/message/6617254#6617254>

  • Error when exporting file from LR5.2 - file created

    After updating to LR5.2, I receive an error when exporting files to another disk drive.  a file is created, but a warning appears "Unable to Export:  "An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute".  I also have CC iunstalled for other applications, but originally installed LR5 as a standalone Adobe application.  I tried removing the program and reinstalling through CC, with no change in this behavior.

    The answer is in the thread:
    http://forums.adobe.com/thread/1303578?tstart=0

  • How to retain numerical order (Of file names) when combining files in Acrobat (9) Standard

    How to retain numerical order (Of file names) when combining files in Acrobat (9) Standard, please see the attached screenshot for a clearer explanation.
    I understand that if we prefix all files with leading zero's this will probably resolve the issue but I just wondered if anyone new the answer. The ironic situation is that version 6 has no problem.
    I have spent over an hour with techincal support who were unable to provide me with an answer

    It is not clear how you are trying to do the order. Have you tried to select a set of files and then use the arrow buttons to move them in the list? If you select the heading, that will typically reorder the files by that heading and undo everything you had done before.
    You should be able to select groups of files and move them up and down in the list. All of those options appear on your view, so what is the real question?

  • LR4.2 - Error when moving files

    I can repeatedly reproduce an error when moving files into folders within LR4.2.
    My current folder structure is setup like:
    F:\pictures\YEAR\Folder name\Sub folder\
    When I'm moving files from "Folder name" to "Sub folder" I will be moving approx 6 - 20 photos at a time when sorting them into sub folders. After a while of moving files, LR will stop allowing you to move files and will show up the O symbol with a line through it. Until you close and re-open LR will it allow you to start moving photos again.
    I've had this happen 3 times on me now and is completely reproducible. As above, move a small amount of files from a parent folder into a child folder repeatedly and eventually it will refuse to move any more photos until you restart LR.
    Windows 7 x64 SP1 Professional
    Intel Core i7 950 3.07Ghz
    24Gb DDR3 Ram
    Nvidia GTX470 Video Card
    Intel 520 Series 240Gb SATA3 SSD
    Lightroom 4.2 x64
    Catalog recently optimised with no issues ever experienced with the catalog.

    Hi,
    I experienced the same problem and error message this morning ...and found that the following steps will resolve the error (at least when using LR 3 on a MAC):
    (1) Open LR and rename all the files that you are trying to move by hitting the F2 button, (MAC shortcut)
    (2) Look for any images that may have a '?' mark next to them and resolve if required.  (The '?' indicates a file 'location' conflict within the catalogue, - ie you may have moved the files around outside of LR)
    (3) While still within LR ....highlight all the files that need to be moved ....and drag and drop them into your preferred new location in the usiual way.
    Hope this helps.
    Cheers
    Simon

  • Error when creating files for transport request SAPK-700BGINPLMWUI

    Hello experts,
    We're upgrading our 46c System to ERP 6.0 EHP4.
    In Phase  EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
    We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems  O.K.
    Any help would be really appreciated!!!
    Complete Error message:
    EhP component PLMWUI, 700                                                                               
    Looking for SAINT package for 'PLMWUI' ...                                                                               
    R3upReadNewPackages:                                                                               
    patchType='U', langVect='DEC'                                                                               
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "spda_read_new_packages" by RFC                                                                     
      ismovesVersion='0'                                                                               
    R3upReadNewPackages: exit: rc=0                                                                               
    ... No matching package found.                                                                               
    R3upReadNewPackages:                                                                               
    patchType='I', langVect='DEC'                                                                               
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "spda_read_new_packages" by RFC                                                                     
      ismovesVersion='0'                                                                               
    R3upReadNewPackages: exit: rc=0                                                                               
    Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'                                  
    ... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'                                                             
    (trc) R3upPatchDisassembleQueue: 1 package queue entries                                                                    
    (trc) R3upPatchDisassembleQueue: force=YES                                                                               
    (trc) R3upPatchDisassembleQueue: 1 packages will be disassembled                                                            
    Starting disassembling package queue                                                                               
    Date & Time: 20100319133139                                                                               
    Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"                                           
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC                                                                     
    Input table IT_PATQ:                                                                               
    "SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"                                                       
    Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded                                                           
    Logging off from SAP system                                                                               
    Date & Time: 20100319133139                                                                               
    Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

    Hello Anthes,
    Please Check the things in following sequence :
    1.Use latest SAPehpi, R3trans and tp versions.
    2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
    Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
    3. Source file corruption can be ruled out by execution
    R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
    Note 2050
    4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
    5. Try to update the kernel if it not helps.
    Best Regards
    Niraj

  • Itunes 9.2.1.5 "Error when writing file C:\program files\apple software....

    Got an error message when installing itues 9.2.1.5 "Error when writing file C:\program files\apple software update\softwareupdate.exe you do not have admin right to read/write the menu." "寫入檔案時發生錯誤 C:\program files\apple software update\softwareupdate.exe 你沒有權限存取目錄"
    There is no "apple software update" folder in my C:\program files\
    I tried to uninstalled all apple related software, restart the computer and reinstall the itunes, I still get this error message.
    It appears that the installation of quicktime was successful.

    After the last update I get "QuickTime was not found" Error I have uninstalled and re-installed itunes 9.2.1.5. several times but the problem persists

  • Error when uploading file : Return code = 6 in LSMW

    Hello All,
    Getting the bleow mentioned error in LSMW.
    Error when uploading file Return code = 6 )
    Is it related to access. please suggest.

    did you define the file in step 7 without any error and allocate in step 8 without any error before? 
    I mean in the same system where you execute the read step.
    Make sure you have the file not open when you execute the read step.

  • I'm trying to download Premier pro and I'm getting an error message saying "Error when extracting files"

    I'm trying to download Premier pro and I'm getting an error message saying "Error when extracting files". I use a PC and have made the purchase of that service. What's the problem?

    Hi ampsanru,
    We would need some information regarding the error, could you please post a screenshot moreover your system information i.e. OS, RAM & Graphics card.
    -Ankit

  • When combining files, conversion keeps failing with red notice that the document if password protected. What does that mean and what do I do?

    When combining files, conversion keeps failing with a red notice that the document is password protected. I was combining all pdf files and had just been successful with some of the same content under a different file name. What is wrong and how do I correct it?

    Hey SUSANO,
    I am sorry but you cannot combine files if they are password protected.
    You can check the same under 'File > Properties> Security
    Regards,
    Anubha

  • Error when uploading file :( Return code = 6 )

    Hello All,
    Getting the bleow mentioned error in LSMW.
    Error when uploading file Return code = 6 )
    Is it related to access. please suggest.

    Hi,
    If the Sy-Subrc is 0 then Success,
             Sy-SUBRC is 4 then failure,
             Sy-SUBRC = 6 then the user might be not access to read the file.
    This is due to authorization issue.

  • Error when combining Visio 2010 files in Acrobat X Pro

    Getting the error message No PDF was created because Acrobat encountered an unidentified error when i try to combine Visio 2010 files into one PDF with Acrobat X Pro.  Ive done this many many times before and it worked fine.  It also works fine on another PC in the office with the same software installed on it.  It just decided one day to quit working.  Ive tried to reinstall both programs without success.  I dont have this issue with any other type of file just Visio 2010 files.  I can go into Visio and convert the file there and then combine it with other files after it has been converted as a seperate PDF file, but that is alot more cumbersome than just drag drop and combine.  How can I fix this?

    Did you updates X or have 10.0.0? The updates are required for use with OFFICE 2010.

Maybe you are looking for

  • Bridge-group 1 in a WLAN environment

    I'm configuring some AP 1130 AG. For customer requirements I cannot use the VLAN 1 but in particular a VLAN 102 for the management and the VLAN 117 for the WiFi users. At this point I configured the switch port in trunk with the vlan 117 and 102 as n

  • Telemetry & Zone Clusters

    Does anyone know a good source for configuring cluster telemetry, specifically with zone clusters? I can't find much in the cluster documentation or by searching oracle's website. The sctelemetry man page wasn't very useful. The sun cluster essential

  • Find won't work in TextEdit

    I opened a file in TextEdit. I saved it as Plain Text, but left it open. When I returned to edit the file again, it had "garbage" characters at the top and at the bottom. Instead of just closing the file without doing another save, I edited out the g

  • Trying to get an album to not identify as seperate when they are the same.

    Hi, I know there is a way to do this, but I can't remeber and everything I have found has not worked or deleted the artist and album artwork. I just want my itunes to be more organized. It doesn't seem like there was a reason for it to split like tha

  • Web Service Not Appearing in navigator after deployment

    have written some EJBs (Entity- and Session-Beans), created a WebService from the Session-Bean. After having deployed the WebService, which finished without error, the Web Service cannot be accessed by Web Service Navigator, nor by Visual Admin or We