Flash Global Security & Links Not Working?

Hi all,
I am absolutely near some sort of breakdown with my Flash website....I really hope someone can help!
I am building my portfolio website; I'm using Dreamweaver CS3 (on Mac) and inserting Flash animations in the centre of a table in each Dreamweaver page. All was working fine until I built the Contact page animation on Flash last night. I linked in some external websites to my Blog, Flickr and Twitter and also need a button to launch the user's default mail client.
When I tested the animation (CMD+ENTR) in Flash the links appeared to be working, if after a few clicks. I then inserted the Contact animation into the Contact.html page on Dreamweaver and tested it in Safari. A dialogue box came up regarding something about security settings and Flash 8 (makes no sense as I am using Flash 9); and I ended up on the Global Security Setttings panel page on the Adobe website. I selected the entire folder the website is in on my hard drive under "Trust Files in these Locations". Now the ENTIRE website's flash animations are not working. There are links to internal pages of the site (i.e. a link to the "Contact" page in the animaiton on the Home page) which are now not working either. No error messages come up when I test the movie in CS3 either. I have refreshed Safari, restarted the Mac and redone the folder on the Global Security Settings panel. Also loaded the entire website onto a PC this morning, all links not working either.
Actionscript 3 on the Contact page looks like this:
import flash.events.MouseEvent;
//---Blog Button---\\
var getBlog: URLRequest = new URLRequest("http://www.myblogsdomain.com");
Blg_Btn.addEventListener(MouseEvent.CLICK, eClick);
function eClick(event:MouseEvent):void{
navigateToURL(getBlog, "_self");
//---Twitter Button---\\
var getTwitter: URLRequest = new URLRequest("http://www.twitter.com/mydomain");
Twt_Btn.addEventListener(MouseEvent.CLICK, eClick1);
function eClick1(event:MouseEvent):void{
navigateToURL(getTwitter, "_self");
//---Flickr Button---\\
var getFlickr: URLRequest = new URLRequest("http://www.flickr.com/photos/mydomain");
Flkr_Btn.addEventListener(MouseEvent.CLICK, eClick2);
function eClick2(event:MouseEvent):void{
navigateToURL(getFlickr, "_self");
//---Email Button---\\
var getMail: URLRequest = new URLRequest("mailto:[email protected]");
Eml_Btn.addEventListener(MouseEvent.CLICK, eClick3);
function eClick3(event:MouseEvent):void{
navigateToURL(getMail, "_self");
I'm not 100% sure if the e-mail AS3 I set up is correct, but as none of the links are working I can't test it. I cannot provide a link to the website as it isn't uploaded yet, and I don't really want to upload it not working properly.
Any help at all would be gratefully received, I'm really, really on the brink of some sort of breakdown. Thanks.

Thanks Samuel.Wong and Ned Murphy for the information.
I'm not actually sure what happened but my website suddenly started working again today, I think possibly by selecting "Always Allow" on the Global Security Page as well as inserting every individual file as well as the folder under "Trusted Locations" has also done the trick.
The external links appear to work when I test the movie in Flash CS3, but the same warning comes up once the movie is inserted into a Dreamweaver html page and tested in Safari. However I think when the links (all except the email ) appear to be working in Flash then it should be just fine once uploaded onto the server. Many thanks for your advice once again.
Maxx

Similar Messages

  • Acrobat Help /  Flash Player needed link not working

    I'm trying to install the flash player addon for Adobe Reader and the links found on the adobe help page are showing error messages. When I try to download the installer, they say "no file found" and are showing
    "Not Found
    The requested URL /pub/flashplayer/current/support/install_flash_player_ax.exe was not found on this server."
    when the link is opened.  Any advice?  I just need to view an audio file that was embedded in a .pdf.
    My computer meets the system requirements, as well.
    Thanks.

    Hi Tonyae32, I thot I'd link to your other thread which may be helpful since it gives a lot of background on what has been checked.
    http://forums.adobe.com/thread/732837
    eidnolb

  • Verizon Access Manager Download link not working

    Hi,
              Verizon Access Manager Download link not working, Following Links
    http://www.vzam.net/download/download.aspx?productid=872
    http://pcdn2-download.vzw.com/win/7.7/VZAM_7.7.1_2727b-AC30-Web.exe
    plz help to download verizon five spot access manager.
    thanks
    karthirocks

        Hi karthirocks! I'm sorry to see you're having any difficulties using these links. I've clicked on both, but had no problems getting pages to launch or in getting the application to download. If this is still a problem for you, please describe the issue you're experiencing. Also, please share the browser version you're using, and if you've enabled any security feature that prevents access to certain secure sites or services. Thanks!
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • External links not work

    Hello,
    I have a word document that has external links. Text that
    links to other page or other url.
    When I convert my doc (word document) into a swf using flash
    paper 2 the links not work. There are still highlighted but no
    linking is taking place.
    please help me.
    Thanks
    Alejandro

    I am having the same problem. At first I thought it was
    because I had converted an excel file but I tried the same
    information from a word document and the links do not work in the
    browser or if I view the SWF file separately. Additionally, when I
    convert the word file to a pdf none of the hyperlinks to pages or
    documents work but the links to email addresses do.

  • Adobe Edge links not working

    Yeah I have also experienced links not working when I import my .oam file from Adobe Edge Animate also. Is there anything the Muse team is doing to fix this issue? I need a response from you guys by the end of the week. my company website is malfunctioning due to issues with your software. If there is some sort of hotfix please let us know.

    When you install the software illegally, using a volume license, there is a script you can run that will enter all of the adobe servers into your local DNS hosts file so the software can be activated. This makes accessing those domains impossible. This scenario fits the description of your issue, not suggesting anything beyond that.
    The hosts file is in /private/etc/hosts and can be accessed through the terminal:
    sudo nano /private/etc/hosts
    If you see a bunch of adobe servers in there, that is your problem.

  • Flash Player 10 does not work in IE or Firefox. What could it conflict with?

    I'm  using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
    For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash.  Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything.  I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
    Yup.  Nothing.  When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option.  I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
    When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
    Flash 10i.ocx (10.1.82.76)
    FlashUtil10i_ActiveX (10.1.82.76)
    FlashUntil10i_Plugin (10.1.82.76)
    genuinst (6.0.2800.1531)
    FlashUtil10i_ActiveX.dll (10.1.82.76)
    NPSWF32.dll (10.1.82.76)
    KB931433
    FlashInstall
    Install
    Flashplayer.xpt
    When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled.  I even enabled the other Adobe add-ons for Acrobat and such just to be sure.  Firefox shows Shockwave Flash and Shockwave for Director both to be enabled.  The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
    Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website.  I have DirectX 9.0c installed and everything else works fine.  I can play audio and video elsewhere with no problems.  It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
    Any ideas?

    Well, great.  I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it.  No such luck.  The video still plays, but no sound.
    All the sound settings are working with everything else from games to media players.  I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
    In the Flash folder, I now have:
    Flash10l.ocx (10.1.102.64)
    Flash Util10l_ActiveX (10.1.102.64)
    FlashUtil10l_Plugin (10.1.102.64)
    Genuinst (6.0.2800.1531)
    FlashUtil10l_ActiveX.dll (10.1.102.64)
    NPSWF32.dll (10.1.102.64)
    And the setup and text files that went with 'em.
    I've also done a system restart since then and zip.
    I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go.  The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
    Now what?  I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
    Date: Sun, 14 Nov 2010 17:37:07 -0700
    From: [email protected]
    To: [email protected]
    Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
    Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
    I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
    Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
    After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
    >

  • Add new document link not working in upgraded sharepoint 2013?

    Hello there,
    Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
    is working fine with environment  Office web apps not configured with Sharepoint.
    Looking resoluion /suggestion, thanks in advance.
    Regards,
    Sushil

    Hi  Sushil,
    According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
    from 2010 to 2013.
    For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
    Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
    files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
    1.In SharePoint 2013 Central Administration, click Manage web applications.
    2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
    The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
    it using claims-based authentication, or you can change the authentication method of the web application.
    Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
    To do this, run the following command on the SharePoint Server:
    Get-SPWopiZone
    The result will be one of the following:.
    internal-https
    internal-http
    external-https
    external-http
    Next, run the following command on the SharePoint Server.
    Get-SPWOPIBinding
    In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
    the WOPI zone to match the result from Get-SPWOPIBinding.
    If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
    For more information, please refer to the article:
    http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Dimension security is not working if user have two roles in SSAS while connecting from Excel

    Hello Genius,
    I am facing the issue when user trying to connect the cube from excel if user have more than one role in ssas db.
    Role 1: Countryuser, I have implemented the dimension security with country
    dimension and  countrycode attribute.
    Role 2: CityUser,   I have implemented the dimension security with
    city dimension and  citycode attribute.
    If user is mapped to any one of above role dimension security is working perfectly according to the logic but mapped to both role, cube is exposing all the data in this case dimension security is not working.
    Please give me the solution to fix this issue or incase I am wrong kindly advice.
    Thanks
    Ganesh

    This is the expected behaviour as allowed sets in roles are unioned together.
    This is not a problem when your roles are restricting across a single attribute.
    eg.
    US_role = {[Geography].[Country].[USA]
    France_role = {[Geography].[Country].[France] }
    as someone in both roles ends up seeing {[Geography].[Country].[USA], [Geography].[Country].[France] }
    But when you have different attributes:
    NY_role = {[Geography].[City].[New York] }
    France_role = {[Geography].[Country].[France] }
    The first role is unrestricted on countries and the second is unrestriced on cities which is effectively:
    NY_role = {[Geography].[Country].AllMembers , [Geography].[City].[New York]  }
    France_role = {[Geography].[Country].[France], [Geography].[City].AllMembers }
    And when you union those two sets together you end up with:
    {[Geography].[Country].AllMembers , [Geography].[City].AllMembers }
    Which means that someone in both roles can see everything.
    So if you want to restrict someone to City = New York and Country = France you have to create a
    single role where both attributes are restricted. So if you have a lot of these combinations you will either have to create a lot of "combination" roles or look at dynamic security.
    The other thing that might work is make sure that you only give some users access to certain cities and others access to certain countries. It's the mixing of the two for a single person that causes the issues.
    http://darren.gosbell.com - please mark correct answers

  • Fresh Install HCM 9.1 but Links not working. Help please

    Dear All,
    I'm trying to make a switch from SAP to PeopleSoft. I tought it easier to install PSFT since the number of source to install is much less than SAP. However, I kept getting same error where the links not working no matter which environment I tried to install.
    I downloaded all software from eDelivery.
    HCM 9.1, PTOOLS 8.52, Oracle 11g 64 bit, Oracle Client 32 bit.
    First Try:
    Install on windows 7 64bit. Everything works fine until first login to the PSFT and all links not working.
    Suggestion from Hakan is to apply the patch and gave me a link to the old FTP site. I downloaded the 85209 patch but got password.
    Finally I managed to get a customer ID from a friend and downloaded Patch 85211 and applied. But got java error so I scrapped it.
    Anyway, Gasparotto said the environment is not certified and will not fix my problem with the patch.
    Second Try:
    Installed Virtual Box.
    Installed Windows 2008 R2 and applied the SP1.
    Installed everything all over again.
    Ensured the PTWEBSERVER password similar the username.
    Everything works fine but when login to PSFT, again..... links not working and see on the bottom left corner there are some javascript error where they cannot find certain peoplesoft objects..
    Just upgraded to IE 9 because I read somewhere IE 8 is not certified.
    Tried to login again, no error message and everything looks fine but... links not working.
    Logs also looks normal to me.
    Does anyone ever encountered similar issues before?
    Does this is a normal behaviour before tools patch 85211 being applied ?
    Thanks,
    aLuNa
    My APPSRV Log:
    PSSAMSRV.12 (0) [11/03/12 09:04:46](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is APPSRV(99)/100
    PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Cache Directory being used: C:\APPSRV_CONFIG\appserv\HCDMO\CACHE\PSSAMSRV_100\
    PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Server started
    PSRENSRV.2808 [11/03/12 09:04:49](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is RENGRP(92)/101
    PSRENSRV.2808 [11/03/12 09:04:49](3) Switching to new log file C:\APPSRV_CONFIG\appserv\HCDMO\LOGS\PSRENSRV_1103.LOG
    PSADMIN.2124 (0) [11/03/12 09:04:52](0) End boot attempt on domain HCDMO
    PSAPPSRV.1488 (3) [11/03/12 09:13:16 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091316_1488.3, Token=PSFT_HR/2012-11-03-02.13.17.193528/PTWEBSERVER/ENG/XxZ3vyJWXF/S1MoQtG2Wox6wGJA=
    PSAPPSRV.1488 (5) [11/03/12 09:13:21 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091321_1488.5, Token=PSFT_HR/2012-11-03-02.13.22.193632/PTWEBSERVER/ENG/pS6ec6pIAJJSYc1oOWcNYiR0UFQ=
    PSAPPSRV.1488 (7) [11/03/12 09:13:29 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091329_1488.7, Token=PSFT_HR/2012-11-03-02.13.30.193285/PS/ENG/3GnOezS6D9PUlzwrjPwqexv4ir0=
    PSAPPSRV.1488 (34) [11/03/12 09:18:47 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091847_1488.34, Token=PSFT_HR/2012-11-03-02.18.48.194158/PS/ENG//oJB5tvSHYNzsmZ2Gs4g2vBLUVs=

    alunwawa wrote:
    Does anyone ever encountered similar issues before? Yes, I did already see the same, that was when installed the same with 8.52.00 (without Peopletools patch) or without applying the patch project...
    Does this is a normal behaviour before tools patch 85211 being applied ?Without patch, you have the error you mentioned. How many time I told that 8.52.03 min. is required, I did not go further, but there was some bugs before which make it not working.
    I understand that's rather frustrating for people who wants to jump to Peoplesoft. I don't know SAP, but here you go, Peoplesoft is not a simple toy.
    Unfortunately, if you have no access to My Oracle Support to get the Peoplesoft patches, you have no way but work on Peoplesoft OVM (free of use), and to use them on VirtualBox, the Jim's articles are worth to follow.
    Nicolas.
    PS: @Jim, thanks for the kind words.
    My last install guide is quite old now (PT8.50/Linux), even though it did not change very much within the last tools 8.52. But seeing the number of time such questions have asked over here (PT8.52 on Windows), I'm thinking to write one more, that time on Windows.

  • Purchased Lightroom 5 and Download link not working. Please advise

    I have Purchased Lightroom 5 followed the download instructions and Download link not working.
    I get a dialog box stating that I have Explorer 4 and I need a later version.
    I am in fact running Explorer 10.
    Please advise.
    Bob Spree
    England

    Please see http://forums.adobe.com/thread/1229333 where this topic has been discussed.

  • Links not working correctly in PCUI for CRM

    Hi All,
    We are implementing mySAP CRM 4.0 through PCUI on Portal
    EP6 SP14.
    I have integrated the CRM Business Package 60.2 in Portal.
    Proper User has been created in the backend and assigned Sales Manager Role both in the portal and in the CRM backend.
    We are facing problem of links not working in the CRM Contents. When we click on the links in the CRM Portal Contents ( BSPs) we don’t get the desired application opening.
    When we click any links in the BSP's ( Activity Links in Opportunity Management BSP ) we get a blank page popped up.
    I have the screen shots with me. Any one responding can get the screen shots from me.
    Thanks in Advance
    Rohit

    Rohit,
    Have you maintained configuration in (transaction CRMC_BLUEPRINT_C --> Navigation (URL Generation) --> Assign Object Method to Role)? Be sure that the role that you are using is present and ID Page/Service field correctly points to the pcd url for your portal.
    When testing, it may be helpful to set parameter CRM_URL_BUFFER_OFF = X on the user profile (SU01) to turn off the url buffer. That way changes made above are immediate.
    Best Regards,
    Bernard

  • Web links not working in iPhone calendar notes. Used to work. Ideas?

    Web links not working in iPhone calendar notes. Used to work. Ideas?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • Why Does Dynamic Link Not Work

    I purchased the CS5 Adobe Production Premium.  I have been working in Premiere and I have been learning about how to use Dynamic Link. I want to be able to alter clips in After Effects and bring them back and forth into Premiere.  When I go to File/ Adobe Dynamic Link/New After Effect Composition, I get this message:
    Adobe Dynamic Link Requires Adobe Production Premium.
    Since I own production premium, I do not know why I am getting this message.  I have reinstalled the CS5 Production Premium Software twice and it still gives me the same message.  What can I do to get Dynamic Link Working.

    Thank you for the tip.  Could you possibly tell me how to deactivate and
    then reactivate the suite.  I am using a Macbook Pro laptop running OS
    10.6.4.  I do not even know where to start.
    From:   Colin Brougham <[email protected]>
    To:     Dan Seanor <[email protected]>
    Date:   03/15/2011 09:55 AM
    Subject:        Why Does Dynamic Link Not Work
    Deactivate the software (not uninstall), and then reactivate the suite.
    This often fixes this. You can opt to leave the serial number on the
    system; no need to clear it and re-enter it.

  • Camera flash of iphone 4s not working

    Camera flash of iphone is not working can not take a picture with flash??
    Please suggest a solution.

    If you bring up the shortcut bar from the button of the screen by swiping upwards, can you switch the torch function on and off?
    Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
    You will not lose data by resetting.
    Did you make sure that the flash is activated in the camera app? Did you try to switch it off, take a photo and switch it back on again?
    To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the camera. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Find an Apple Authorized Service Provider
    iPhone - Contact Support - Apple Support

  • Satellite X200 - flash card slot is not working

    Hi, i got a Toshiba Satellite X200 23P with Vista.
    my flash card slot is not working, i'm using a SD card which i already used some month ago and worked well.
    When i put the card nothing happens.
    Please help.
    Thanks

    Hello Tiger
    Please go to Toshiba support page under http://eu.computers.toshiba-europe.com > Support & Download, choose on drivers download page your notebook model and there you will find this driver. Click on the small red symbol at the right side to pick up info what it is.
    Without many questions try to download and install this driver to see if this will help to make your flash card slot to work properly. You cannot do anything wrong.

Maybe you are looking for

  • Change windows title in Portal 60

    Hi. When we navigate page in porta1, We have page title in browser title for example "Portal Support Desk - Enterprise Portal 6.0 - Microsoft Internet Explorer". In above, "Portal Support Desk"  is a page title and "Enterprise Portal 6.0" is a portal

  • Coalesce free space in blocks

    Hi Assume I insert a row into the block and there are small free spaces inside the block. Does oracle automatically coalesce the free spaces in the block for my new row ?

  • Fetxhin tax conitions in purchase order

    hi all, i am doing medruck.i need to display bacis excise duty,edu.cess ,hr.educess,cst and vat.i found the codition types in konv.but some condition types not found in konv.i used condition no (knumv).but i could not find the conditions(jmop,JMX1,JE

  • Error from appleSyncNotifier.exe : ista pc . how can i solve this problem?

    cannot find procedure xmlTextreaderConst in DDL-bestand libxml2.dll . get this always after i start up mu windows vista pc . how can i solve this problem?

  • New and odd issue with edited photos

    How much do I hate iPhoto, let me count the ways. Another new issue for me. My DSLR has a lot of dust on the lens I cannot shift which means I get a lot of annoying blemishes on my photos that I go through on iPhoto to retouch. Slow but has to be don