Flash in portal page not working correctly

I have two .swf movies. One .swf file is dependant on the other. e.g A.swf is dependent on B.swf. I embed A.swf in the HTML portlet. But B.swf is not being reflected only content specific to A.swf is being shown. I checked the same code deploying it on my midtier app. server and JDev and it works fine. But inside the portal page it doesn't work correctly. I placed both A.swf abd B.swf in htdoc folder and used http://localhost/A.swf and it works fine. It's only that when I use it in the portal page it doesn't work correctly. Any ideas what might be a problem. Thanks

Hi,
I guess, either i did not put my point across correctly or i have not understood your situation completely...
My Understanding:
File A depends on File B, so meaning that File A must be loading up File B internally (via dependency reference). If this is the case, then the dependancy reference is relative .. Not absolute. Meaning...
<root_dir>
|--> File A
|--> File BSo, now A expects B to be available in the same directory as its origin. Translated to the web-page, it expects File B to be available at the same <browser_url> (note, not the url from where File A has originated).
So, the solution is to make A refer to B via a direct URL. I am not sure how you do it in the flash object tags.
thanks,
Harsha

Similar Messages

ITunes Store Pages not working correctly

Since a few days ago iTunes Store (on full page) is not working correctly. The "pictures at the top" do NOT rotate any more (usually every 10 seconds or so before) often with blanks too. Also when clicking on an Lp information the box appears but Blank too. I have tried all the usual methods - permissions and disc checks etc. If I use small page (not full) it seems to work OK. The problem began after Safari 5 arrived. Anyone else having iTunes problems like this? (Similiarly the Dictionary Application with Wikipedia is not working correctly - but thats another issue!). Any answers out there??
Message was edited by: Dave Jelfs

This issue has now been completely resolved with the introduction of iTunes 9.2 Everything up and running again - thank you Apple! (Still an issue with Dictionary app/Wikipedia not functioning correctly, this has not been resolved)

IE11 - Captive Portal Pages Not Working

Recently, I have had several complaints from Windows 7 users that are trying to connect to hotspots at the airports and hotels and they are getting page cannot be displayed error in IE11. They are actually getting two, one is the standard error check connections and whatnot and the other says Turn on TLS1.0, TLS1.1 and TLS1.2 in the Advanced settings and try connecting to https://www.google.com again.I checked the settings and all TLS versions. I do have a GPO that is disabling SSL 3.0 and in the Advanced settings menu, it displays "Some settings are managed by your system administrator." The word settings is a link and when I click it, the captive portal page actually loads and allows me to accept the terms and conditions and access the internet.Anyone else see this?
This topic first appeared in the Spiceworks Community

I have had my TP since July and have connected to the internet via wifi at airports, hotels, coffee shops ect. You should not be waiting for HP to fix the OS. You need to decide if the problem is you or your TP. If it is your TP then get it fixed.

When building an iPad HTML5 app, why does the splash page not work correctly in landscape mode?

I have recently completed an HTML5 web app for the ipad and one of the most challenging things about the process was getting the splash screen to work.
I have now succesfully completed the job and the splash screen works, but only under the bizarre condition that the app is first launched in portrait mode. This seems pretty crazy as most people using the ipad for browsing do so in landscape mode.
Has anyone come across this problem and resolved it?
cheers

yes, bare in mind this is an HTML5 Web App and not a native app. so yes I have included code for both landscape and portrait modes.
I install the web app and open in portrait, it works. then close and open in landscape, it works.
if i install the app and open in landscape FIRST... then no splash screen ever works.
This isn't just my problem. I've read about in several forums over the past few days while investigating.
thanks

Movies on photo album page not working correctly

I have movies on some photo album pages, and only since updating to Snow Leopard, when I click on a movie, the sound begins to play, but the picture sticks on the poster frame. If I go "back to album" and click the movie again, it will usually play normally. What gives? Anyone else have this happening?

I have a similar problem with movies. Put a movie made on the iphone into a space holder place on a Blog page. Got the green plus sign and it played on the page.
After publishing I see the first frame on the main blog page, but when I click read more to see the movie and whole blog entry I get a faded quicktime symbol with a question mark symbol in the middle.

Why is my Microsoft Word document not working correctly with Pages

I have created a new CV (Resume) in Microsoft Word on my work computer, it is using the latest version of Office. When I attempted to open the document in Pages on my home Mac, the formatting was slightly incorrect, but the main issue is it is missing two pages! The exact same document when opened in Word has three pages but in Pages, it only has one! I have had nothing but problems with Pages since I bought it! Can someone please help me get Pages to work correctly with my documents that are created in Word! Than you.

Pages does not allow a single cell in a table to span more than a page and there may be other problems that you also have not told us about.
Redo your CV using the excellent Pages templates, Word's templates are Uuuugly!
Being text based, with good typographical layout, those Pages templates should translate accurately back and forth from Pages to Word.
Frankly CVs don't require anything fancy. You could do an excellent, well laid out and very attractive CV in TextEdit which is no slouch in the word processing department.
Peter
PS Start off by saving your Word CV to .rtf or .txt which will strip off most of the bad formatting. Then reopen it in Pages or drag in the snippets of text into a Pages CV template's placeholders to automatically format the text nicely.

Login action buttons no longer work and some pages not displaying correctly after upgrade.

After recent update, some web pages not displaying correctly and Login buttons on some sites do not work. I've updated my plugins and restarted computer, but problems remains. Is this Java, Javascript or something else? Same pages are working fine in IE.

Please update the firefox to the latest version of firefox 26
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
 To Enable SafeMode 
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Keyboard shortcuts in flash cs6 not working correctly

i bought 3 licences of creative suite cs6, and in every one of them flash cs6 keyboard shortcuts wont work correctly.
specifcly the tools shortcuts such as space bar for hand tool, v' for arrow key and more.
i need to restart flash for them to work again. this happened on 3 of my studio's computers!
please help
i'm on a pc machine, intel i7, 2.8 GH
windows 7, 64 bit, 16gb ram,

Mohanaraj CS schrieb:
Hi torben123,
This issue has been resolved in Flash CC, please take a look at it and let us know if you still face any issues.
Thanks!
Mohan
Mohanaraj CS, I'm still using Flash Pro CS6 on my MacBook Pro and the shortcuts don't all work correctly because Flash (German version with German language keyboard setting in OSX) seems to use an US keyboard setting only for the shortcuts internally (if I type into fields, I've got my German layout, but if I want to set up a shortcut like cmd + + for zoom in oder cmd + - for zoom out, it shows cmd + ] and cmd + / instead).
And the "fix" to an obvious bug (as you said by yourself) now is TO BUY CC??
Come on, Adobe Staff, is that how you treat your customers?
A little -known- bug but you have to get (and buy) the cloud thing, if you want it fixed... did you get the bug into the code THEREFORE in the last update?
I really love the Adobe software but this is the baddest joke since a looong time, Mohanaraj CS.

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
 <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
 </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is NOT going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is NOT initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
 hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

Flash Player 10 does not work in IE or Firefox. What could it conflict with?

I'm using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash. Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything. I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
Yup. Nothing. When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option. I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
Flash 10i.ocx (10.1.82.76)
FlashUtil10i_ActiveX (10.1.82.76)
FlashUntil10i_Plugin (10.1.82.76)
genuinst (6.0.2800.1531)
FlashUtil10i_ActiveX.dll (10.1.82.76)
NPSWF32.dll (10.1.82.76)
KB931433
FlashInstall
Install
Flashplayer.xpt
When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled. I even enabled the other Adobe add-ons for Acrobat and such just to be sure. Firefox shows Shockwave Flash and Shockwave for Director both to be enabled. The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website. I have DirectX 9.0c installed and everything else works fine. I can play audio and video elsewhere with no problems. It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
Any ideas?

Well, great. I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it. No such luck. The video still plays, but no sound.
All the sound settings are working with everything else from games to media players. I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
In the Flash folder, I now have:
Flash10l.ocx (10.1.102.64)
Flash Util10l_ActiveX (10.1.102.64)
FlashUtil10l_Plugin (10.1.102.64)
Genuinst (6.0.2800.1531)
FlashUtil10l_ActiveX.dll (10.1.102.64)
NPSWF32.dll (10.1.102.64)
And the setup and text files that went with 'em.
I've also done a system restart since then and zip.
I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go. The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
Now what? I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
Date: Sun, 14 Nov 2010 17:37:07 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
>

1st Gen iPod touch not working correctly?

I have a 1st generation 8GB iPod Touch. It's not working correctly.
My biggest problem is that, unexplaiably, certain areas of the screen don't seem to register touch anymore. There is a sort of "L" shape on the left and bottom edges of the screen that won't register touch, making it impossible to move applications to the previous page on the home screen and making it hard to use the keyboard/buttons while in portrait mode. It's extremely frustrating to try to change the volume while playing a song, as I now have to either put the iPod in sleep mode then double tap the home button or flip it to cover flow and double tap the home button to do it.
http://i38.photobucket.com/albums/e140/Vipershark/IMG_0001.png
(Highlight the image to see it better.)
This is a screenshot of the working/non-working areas that I made using the Whiteboard application. The white area that you see (excluding the little half circles of black which are extended brush strokes and not actually working areas) is the area that doesn't work. I can't seem to figure out why it happened, as I've never dropped or otherwise damaged it. It just happened one day, and I don't know why.
But I can't fix it. I've tried everything. Upgrading (I'm now running iPhone OS 3.0 which still didn't fix the problem.) didn't work, restoring didn't work, deleting everything and restoring from factory settings didn't work.
I'm also having a few other problems as well, though they're not as bad. My home button seems to stop working sometimes and sometimes the entire screen witll stop registering touch until I put the iPod to sleep and turn it back on. It also seems to go a lot slower than usual.
My iPod is less than a year old. Can you help?

Vipershark,
I had a very similar problem this past weekend with my 1G 8GB iPod touch. But with me, just the left side of the screen wasn't registering my touch. I could still access the bottom section, which you cannot.
The good news for me is that I fixed it and I hope it works for you as well. What fixed it for me was resetting all my settings. To do this, go to the settings icon, then click on general, and then on the very bottom is reset. Choose "reset all settings."
Apparently this is different than a restore through iTunes, which you tried. I also tried that earlier and it did not help.
Of course, the reset solution I used relies on you being able to access all of the correct buttons, so I hope you can!
Please let us know if this works for you. If not, since it is less than a year old, it is still under warranty. Contact Apple and see what they can do.

Smart feed not working correctly

hello,
the smart feed are not working correctly in this course page :
https://deimos.apple.com/WebObjects/Core.woa/BrowsePrivately/upmc.fr.2857894925. 02857894930
Modified=01ca6e794f33e660
I don't understand why...

C, sorry…I read your posts out of order. I see that you have links to your smart groups after all. My apologies.
It's as you say, the course pages load up, but I don't see anything in the smart groups. Just thinking out loud here…maybe the search criteria don't genuinely match anything on your site? Perhaps there are actual matches, but you've hidden content with a new credential?…I accessed both pages using the "Unauthenticated" and "All" credentials. My last/craziest guess is that it has something to do with localization…français versus anglais?

Portal is not working...Please help ASAP

Dear SDN,
Our Portal development server is not working...when I enter the URL in IE, it gives Page cannot be displayed message..I tried giving different values but still it's not working.
I have also taken the remote access of the Development server & tried opening the portal, but not working..what could be the reason?
pls help

Hi harini,
I did this several time but it's still not started. The developer trace info is like this:-
epserver\saploc\J2D\JC00\work\dev_jcontrol
trc file: "F:\usr\sap\J2D\JC00\work\dev_jcontrol", trc level: 1, release: "640"
node name   : jcontrol
pid         : 4748
system name : J2D
system nr. : 00
started at : Thu Feb 07 11:47:04 2008
arguments   :
    arg[00] : F:\usr\sap\J2D\JC00\j2ee\os_libs\jcontrol.exe
    arg[01] : pf=F:\usr\sap\J2D\SYS\profile\J2D_JC00_epserver
[Thr 2708] Thu Feb 07 11:47:04 2008
[Thr 2708] *** ERROR => Invalid property value [box.number/J2DJC00epserver] [jstartxx.c   789]
[Thr 2708] *** ERROR => Invalid property value [en.host/epserver] [jstartxx.c   789]
[Thr 2708] *** ERROR => Invalid property value [en.port/3201] [jstartxx.c   789]
[Thr 2708] *** ERROR => Invalid property value [system.id/0] [jstartxx.c   789]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\J2D\JC00\j2ee\cluster\instance.properties;F:\usr\sap\J2D\JC00\SDM\program\config\sdm_jstartup.properties]
-> ms host    : epserver
-> ms port    : 3601
-> OS libs    : F:\usr\sap\J2D\JC00\j2ee\os_libs
-> Admin URL :
-> run mode   : normal
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : F:\usr\sap\J2D\JC00\j2ee\cluster\instance.properties
-> files [01] : F:\usr\sap\J2D\JC00\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host    : epserver
-> ms port    : 3601
-> os libs    : F:\usr\sap\J2D\JC00\j2ee\os_libs
-> admin URL :
-> run mode   : normal
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : F:\usr\sap\J2D\JC00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID5926700 : F:\usr\sap\J2D\JC00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID5926750 : F:\usr\sap\J2D\JC00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID5926700            : F:\usr\sap\J2D\JC00\j2ee\cluster\instance.properties
-> [01] ID5926750            : F:\usr\sap\J2D\JC00\j2ee\cluster\instance.properties
-> [02] sdm                  : F:\usr\sap\J2D\JC00\SDM\program\config\sdm_jstartup.properties
[Thr 2708] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 2708] [Node: bootstrap] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_06
JStartupIReadSection: read node properties [bootstrap]
-> node name       : bootstrap
-> node type       : bootstrap
-> java path       : C:\j2sdk1.4.2_06
-> java parameters : -Djco.jarm=1 -Djco.jarm=1
-> java vm version : 1.4.2_06-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type    : server
-> java vm cpu     : x86
-> heap size       : 128M
-> root path       : F:\usr\sap\J2D\JC00\j2ee\cluster
-> class path      : .\bootstrap\launcher.jar
-> OS libs path    : F:\usr\sap\J2D\JC00\j2ee\os_libs
-> main class      : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\J2D\JC00\j2ee\os_libs\jstartup.jar
-> parameters      : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0059267
-> debuggable      : yes
-> debug mode      : no
-> debug port      : 60000
-> shutdown timeout: 120000
JStartupStartJLaunch: program = F:\usr\sap\J2D\JC00/j2ee/os_libs/jlaunch.exe
-> arg[00] = F:\usr\sap\J2D\JC00/j2ee/os_libs/jlaunch.exe
-> arg[01] = pf=F:\usr\sap\J2D\SYS\profile\J2D_JC00_epserver
-> arg[02] = -DSAPINFO=J2D_00_bootstrap
-> arg[03] = -file=F:\usr\sap\J2D\JC00\j2ee\cluster\instance.properties
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_4748
-> arg[07] = -jvmOutFile=F:\usr\sap\J2D\JC00\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=F:\usr\sap\J2D\JC00\work\std_bootstrap.out
-> arg[09] = -locOutFile=F:\usr\sap\J2D\JC00\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=F:\usr\sap\J2D\SYS\profile\J2D_JC00_epserver
-> lib path = PATH=C:\j2sdk1.4.2_06\jre\bin\server;C:\j2sdk1.4.2_06\jre\bin;F:\usr\sap\Python\.;F:\oracle\J2D\ora92\jre\1.4.2\bin\client;F:\oracle\J2D\ora92\jre\1.4.2\bin;F:\oracle\J2D\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\HP OpenView\Installed Packages\{790C06B4-844E-11D2-972B-080009EF8C2A}\bin;C:\Program Files\HP OpenView\Installed Packages\{790C06B4-844E-11D2-972B-080009EF8C2A}\bin\OpC;F:\usr\sap\J2D\SCS01\exe;F:\usr\sap\J2D\JC00\exe;F:\usr\sap\J2D\SYS\exe\run
-> exe path = PATH=C:\j2sdk1.4.2_06\bin;F:\usr\sap\J2D\JC00\j2ee\os_libs;F:\usr\sap\Python\.;F:\oracle\J2D\ora92\jre\1.4.2\bin\client;F:\oracle\J2D\ora92\jre\1.4.2\bin;F:\oracle\J2D\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\HP OpenView\Installed Packages\{790C06B4-844E-11D2-972B-080009EF8C2A}\bin;C:\Program Files\HP OpenView\Installed Packages\{790C06B4-844E-11D2-972B-080009EF8C2A}\bin\OpC;F:\usr\sap\J2D\SCS01\exe;F:\usr\sap\J2D\JC00\exe;F:\usr\sap\J2D\SYS\exe\run
[Thr 2708] Thu Feb 07 11:47:12 2008
[Thr 2708] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx.c   1433]
[Thr 2708] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
[Thr 2708] JControlCloseProgram: started (exitcode = 66)
[Thr 2708] JControlCloseProgram: good bye... (exitcode=66)
Pls tell me how to trace this error...

Spry menu formatting not working correctly in DW CS6

Hello,
I've installed a spry menu but the formatting is not working correctly.
The hover colour works correctly but the selected menu item colour does not change. Only the home menu tab remains coloured.
Please can anyone suggest what might be wrong?
Thank you.
Robbieg

Ah. OK. I've found the problem. On the every page I've got a class=current attribute to the <a> tag for the home menu item.
Now, since this menu code is in a template as part of the top part of every page, it means that this is also included on all the other pages of the site. How do I get this attribute to be different on each page that uses the template?
Thank you.
Robbieg

LoginFilter not working correctly

My Login filter is behaving very strangely. Here is the relevant code from the filter.
if (o != null
                || (url != null && (url.indexOf(LOGIN_URL) > 0
                        || url.indexOf(LOGIN_FORM_URL) > 0
                        || url.indexOf(EXTERNAL_LOGIN_URL) > 0
                        || url.indexOf(EXTERNAL_LOGIN_FORM_URL) > 0
                        || url.indexOf("images") > 0 || url.indexOf(services) > 0))) {
            chain.doFilter(request, response);
            return;The problem is we are trying to allow an external application to log into mine. The external application generates a link with an /externalLogin.do as the href. It steps into the above code and the indexOf() correctly finds it and the chain.doFilter is executed. But it never makes it to the externalLoginAction.java.
If I copy the link and put it on my Login.jsp page and click it, it makes it to the chain.doFilter the same but then continues on to the externalLoginAction.java.
So it look like the chain.doFilter is not working correctly if it is not comming from the same context?
Anyone have any ideas?

stupid stupid stupid.
The first url was passing userName and password in the URL the second somehow got changed to userId... so struts was kicking it back.. just changed my struts config to not validate the external login form.

Flash in portal page not working correctly

Similar Messages

Maybe you are looking for