Flash performance updating large area of the screen

Hi folks,
I'm developing a Flash slide show component with several transition effects. The problem is that when the size of the component is large enough (but it is not in the Full Screen mode) CPU usage gets as high as 60-80% on a modern processor and with a more or less modern video card. How can I decrease processor utilization? I have tried all rendering modes (GPU and the like) but it doesn't really provide any improvement.
See the sample here http://seetheproperty.com/presentation_v2/presentation.php?order_id=65578&mode=branded&ws= 1 (click on the WalkThru Video)

Try Window > Application Frame
Some people love hiding the desktop Windows-style. Others loathe it.

Similar Messages

  • HT1551 just updated my apple TV and whit light is flashing continuously and nothing is on the screen anymore.

    Can anyone help with this please?
    Just updated the Apple TV and the white light is now flashing quickly and nothing is on the screen.  Can't access it with the remote from the Ipad.

    Same problem here.  Long time Apple fan, own lots of their products... Greatly disappointed.
    Bought a brand new Apple TV, worked fine for 3 days but then the picture went blank (possibly after an auto update?) and I observed a quickly flashing white light on the Apple TV.  Manual indicates this means it is "having problems" (no kidding) and recommends restoring the software via a micro-USB cable (cable not provided).
    Acquired a cable and attempted this fix but after following the procedure the Apple TV never showed up in iTunes, so I'm unable to perform the restore.  Returning the device today, not sure if we want to get another or just give up and save the $100.

  • Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black.  Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in, any ideas?

    Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black.  Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything.  Looks like the screen is on it's just unresponsive and black obviously.  Has anyone had this problem?  I was updating via wifi right in front of my router and my computer.

    Spoke to a "senior advisor" in the Apple TV department.  Her suggestions:  change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers.  So she confirms that the problem is one of connection to router suddenly dropping out.
    My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue.  It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more.  Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
    My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department.  Make them aware of this problem!

  • Wired Mighty Mouse isn't clicking some areas of the screen

    I'm having some trouble with my Mighty Mouse since yesterday. The system started not responding to some clicks in most areas of the screen, such as the top menu, window titles, finder windows, desktop. The weird thing is that clicking in Dock icons works fine, as well as clicking inside a web page in Safari.
    I've rebooted several times, ran the Snow Leopard 10.6.2 update, but none of these helped. :/
    Do you guys know how to get around this? Next Monday I'll test this Mighty Mouse with my Mac Pro at work, I hope it's not a problem of the mouse itself, but a system problem.

    I had exactly the same problem after giving my ball a super long scrub to clean it. Only the secondary click sometimes worked. Checked to cable iside, but no luck.
    Then went to System Preferences as I figured the middle button was working a bit and set all buttons to Primary by selecting them with the Tab key, scrolling to my option with the up and down arrows, and confirming by pressing the Space key.
    Now my mouse works as a simple one-button device, but that it OK for me. Must have damaged its brain with my ball cleaning. See how you go.

  • Non clickable area on the screen.

    I have a mid 2007 20" iMac that untill now didn't give me any problems. But yesterday I I notice a wierd bug. It's basically a small area of the screen where if I click nothing happens. Here is a video with the bug. http://droplr.com/xK8v Any suggestions?

    Hi
    Well, your problem description sounds strange but of course, it could be a screen problem.
    How about warranty?? Is it valid?
    The warranty covers only the hardware problems and malfunctions.
    For me it does not sound like a software issue and therefore the warranty should cover the notebook check, reparation or display replacement.
    I read about a strange color problems on a Satellite A100 series. Some pixels were light and some pixels were dark.
    The BIOS update has solved this issue.
    But you know, it does not mean that the Bios update will help you.

  • After iOS 5 update two thirds of the screen is black

    A few hours after my iOS 5 update two thirds of the screen is wiped out (black). The touch gestures work fine on all the screen, I just cant see two thirds of it.  Picture of the screen attached:
    Has anyone seen this before?
    I restored the iPad to its defaults but this did not resolve the problem.
    Many thanks!

    Does it stay black in the same area whichever way up you hold the iPad ? Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. But you may need to contact Apple

  • My ipad is locked and it tells me to update my icloud but the screen is not responding to my touch?

    How do I get my screen unlocked so that I can update my ipad.  The screen is not responding to my touch, instead it is telling me... " This ipad hasnt been backed up in  12 weeks. Backups happen when this ipad is plugged in, locked and connnected to wi-fi".  Does this mean that I cant use this untill it is all done backing everything up? And how do I begin to use it since it says its locked?

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    After it boots up again, you will be able to use the iPad. You should backup the iPad like the message is telling you to do.

  • Cannot click on certain area of the screen

    I'm not sure if this is a display or a mouse issue. I have had my 24" iMac since June and have just started having this issue. I cannot click (left or right mouse button) on one specific part of the screen. I can click on links and buttons, form boxes, bring up the contextual menu (right click) or do pretty much anything you do with the mouse on most of the screen. However in this approximately half inch high and a few inches long area just above the middle of the screen on the left hand side there is no response from computer when clicking with the mouse. I can click on a link in the browser above this space and below it but not on the link in it. If I move the browser window so that same link appears in a different part of the screen I can click on it fine and cannot click on the link now in the affected area.
    This is the same for any clickable item placed in this area of the screen. Is this a display or a mouse issue?

    If you have an external drive that can be erased, you could try installing a new system there and setting the Mac to boot from it. That will determine if it is related to the current system installation, or if it is more likely to be a hardware problem. You can obviously also back up your data, erase your internal drive, and reinstall a new system there.
    Alternately, as a test, you can just startup from your Mac OS X installation disc. At the first installer screen, go up to the menu bar. Under Utilities, run Disk Utility. Move the Disk Utility window around the screen as needed to see of the same problem exists while booted from a different system. If it happens there, then it is more likely to be some odd hardware-related issue. If it does not, it is possible a fresh system installation will resolve the problem.

  • I dropped my ipod touch in the street and there is a large crack in the screen can i take it to the apple store and pay to have it fixed there or do i have to send it out?

    i dropped my ipod touch in the street and there is a large crack in the screen can i take it to the apple store and pay to have it fixed there or do i have to send it out?

    They can fix it at the Apple Store. I wish you could get it fixed for free, but the warranty doesn't cover accidents like this . It sounds like you understand this, I just want to make sure you know.

  • All of a sudded, my firefox browser isnt allowing my to click links and open pages, or open anything on the top area of the screen.

    All of a sudded, my firefox browser isnt allowing my to click links and open pages, or open anything on the top area of the screen. For example i go to my email and i cant click on inbox, send, create, folders, mark as unread. It is like this on every website?? Its really annoying i cant do anything becasue most sites have login at the top of the screen and i cant login to anything.

    That problem can be caused by the Yahoo! Toolbar that extents too much downwards and covers the top part of the browser window and thus makes links in that part of the screen not clickable.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    You can keep an eye on this thread:
    *[[/forums/contributors/707748]]

  • I need to update my InDesign but the screen just keeps on saying InDesign downloading now but nothing happens, HELP PLEASE

    I need to update my InDesign but the screen just keeps on saying InDesign downloading now but nothing happens, HELP PLEASE

    Nobody can tell you anything without proper system info or other technical details.
    Mylenium

  • Overlaying area in the screen

    Hi,
    I'd like to do following:
    In a rectangular area in the screen, I'd have two displays, one is a NSCustomView, another is NSTableView, the two will be on top of the other, only one is seen at given time, any hints on how to do this? Thanks.

    using tabless NSTabView seems working

  • How can I show viewers of my projected iPad screen where my fingers are touching the screen?

    So Keynote shows a cool "laser pointer" when you hold your finger against the screen in presentaiton mode....
    I'd like to use a similar "laser pointer" effect to show where my fingers are touching the screen in any application -- and, yes, where there are simultaneous multiple finger contacts.
    This would be so helpful in demo-ing the "new" iPad to a group of 30+ professors this coming August. Hold an iPhone over the screen as a camera just doesn't "cut it."
    - Brian

    You can add extra empty toolbars if you want to see more of the persona.
    You can create extra toolbars to get extra space via "View > Toolbars > Customize" or "Firefox > Options > Toolbar Layout"
    You have to put something on a toolbar (drag a Space item onto it) before closing the Customize window because empty toolbars are automatically removed.

  • In IMovie 11 the viewable area of the screen shrinks when placed in project editing. How do I keep this from happening?

    In IMovie 11the viewable area of the screen shrinks when placed in the project editing area.  How do I keep this from happening?  Thanks

    Mine doesn't show anything in the CSS Designer panel when I make a selection in Code Vew. It will only pop up the css set for a given element if I select that element in Design View first. If I drill down using the Sources and Selectors sub windows in the CSS Designer panel itself, it works the same in both. I pretty much never use it, but it doesn't do what you're explaining in my version of DWCC, so I'd guess you may have some slight corruption in the program.
    Unless, does it make a difference if you have Live View turned on or not?
    You could try clearing the program cache/personal config folder: Deleting a corrupted cache file
    Or restoring preferences if the cache doesn't do the trick: Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html

  • Selecting objects or ares of the screen, copy, and paste are missing

    Hi,
    Why such a standard and important functionality like selecting objects or areas of the screen, then copy and paste them are missing in the product?
    A

    Hi,
    You can't select objects in Ideas, you can copy/paste the whole layer's contents by duplicating it, there is an icon in the layers panel, next to flip and merge down icons.
    Emi

Maybe you are looking for