Flash Player 11.7.700.224 and Total Defense Internet Security Suite

I'm using flash player 11.7.700.224.  I've uninstalled it (there were no old versions) and reinstalled it many times.  Movies won't load in YouTube unless I put https in front of the address.  I've done everything Adobe suggests doing with caches, etc.  Also, Internet Explorer 10 keeps crashing when I try to use it.  I've read in one place that the problem is with Total Defense Internet Security Suite (version 7).  Anyone have any suggestions?

When I did what you suggested, the videos start to load -- I see about 3 seconds or so and then I get a
"video player error" message on a black screen.  I tried 5 different videos with the same result; some played a few seconds longer than the others.  I also upgraded to Firefox 22, but that seemed to have no effect on anything with this.

Similar Messages

  • Is Flash Player 11.7.700.224 really compatable with Windows Vista 64-bit?

    I ask this question because under System Requirements, Window Vista 64-bit isn't listed.  I've inserted the link for the system requirements below...
    http://www.adobe.com/products/flashplayer/tech-specs.html
    I'm trying to figure why my Flash Player disappears from time to time when I'm watching a clip/video and then my Internet Explorer 9 typically stops working, it closes down, and then it opens up and asks me if I want to restore the browsing session.  I'm thinking that this has to do with having both Internet Explorer 9 32-bit and 64-bit.  I read online that Internet Explorer 9 has both and this is why I'm questioning whether Flash Player 11.7.700.224 might be contributing to this issue or was Window Vista 64-bit left off the system requirements in error?
    Thanks!

    Try using the installers from the links in http://forums.adobe.com/thread/909550
    P.S. topic moved to the Installation section of the forum.

  • Flash Player 11.7.700.224 stops working

    Flash Player 11.7.700.224 stops working. Must uninstall to stop pop up notices that it stopped. It takes over my Firefox. I reinstall and in a day or two I again get those endless notices that stop me from using Firefox.  What's up?

    When I did what you suggested, the videos start to load -- I see about 3 seconds or so and then I get a
    "video player error" message on a black screen.  I tried 5 different videos with the same result; some played a few seconds longer than the others.  I also upgraded to Firefox 22, but that seemed to have no effect on anything with this.

  • Computer crash with Adobe Flash Player 11.7.700.224

    I installed Adobe Flash Player 11.7.700.224 (OS Windows 7 (64-bit)) and now, each time I try to see a video, my computer crashes

    I have checked the graphic drivers and they are up to date.
      I install the last version of Flash Player, start to see a video and after few seconds the screen become black and I have to force the restarting of computer

  • Flash player 11.7.700.224 keeps crashing in firefox 21.0

    anybody else having trouble with flash player 11.7.700.224 crashing in firefox 21.0?

    Yes, & it occurs several times a day ! So Aggravating & frustrating !

  • Flash Player 11.7.700.169 and Youtube videos viewing problem

    I have just updated to the latest version of Flash Player 11.7.700.169 I cannot view many of my favorite YouTube as it ask me over and over again to update to the latest version . This is the latest version and I did it 4 times in arow. Always unable to watch many Youtube videos now. Anyone had encounter the same problem? I have Vista and Explorer 9. This just happen this morning. Didn't have any problem yesterday before this morning.Can someone tell me what is wrong and help me fix this annoying issue? Thank you

    I'm having the same issue; non-HTML5 videos won't play. Specifically they start for a couple seconds and then freeze. I'm running Windows XP and Firefox.. I tried de-selecting hardware acceleration, increased the local storage, and I don't know what else to do. XP, Firefox, and Flash are all the latest versions.
    This has only been for the last 2-3 weeks, and the only things that have changed are updated Flash, updated Firefox, and supervisor installed Norton while I was on vacation.
    Please, any suggestions?
    ETA: And just like that, it's working! I think that I probably should have restarted the computer after changing my settings yesterday. Or not; still confused but relieved.

  • Problem with the Flash Player 1,7,700,202 and monitor stand-by

    Hi
    I have installed Flash Player 1,7,700,202 on Windows 7 Ultimate SP1 64-bit with Internet Explorer 10.x and I have a problem on each account:
    When I play back a video or I see a Flash animation on a Web page, the monitor does not go more into stand-by during their visualization. How come?
    Thanks
    Bye

    Are you looking to have your monitor go into standby while video is playing?  I suspect you might get a better response on Microsoft's forums.
    http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

  • Adobe Flash Player 11.7.700.224 not recognized by PC

    My PC does not recognize that I have installed Flash Player 11.7.700.24.

    uninstall it & reinstall the release that used to work.

  • Flash player 11.7.700.224

    Je suis sur PC, Windows 7 Pro, Windows Internet Explorer 9. J'ai téléchargé FlashPlahyer 11.7.700.224 et ne peut ouvrir aucune vidéo ni PDF Calaméo qui me sont transmises dans le cadre de mon bénévolat pour la recherche médicale sur la sclérose en plaques (MS). A chaque fois on me demande de "mettre à jour mon flash player"
    Qelle solution ? quel flash player télécharger ?
    Merci

    Bonjour,
    Je ne sais pas si ça pourra résoudre votre problème mais la version actuelle est la 11.7.700.225 et se télécharge à cette adresse.
    Concernant les PDF il faut avoir installé Adobe reader pour y accéder.

  • Flash Player 11.7.700.169 and 11.7.700.178 Not loading External Audio

    We have a website that uses Action Script 2 (AS2). We load .mp3 files from our server to our flash program on our website.
    Sounds built into the flash library load fine, but .mp3's loaded from our server do not.
    The audio loads a few seconds of the first clip and then cuts off, and then after going a few pages into our flash program the audio begins loading audio files more completely allowing some clips to play. Then it sporatically stops working.
    Video loads fine. images load fine.
    Our company has received about a hundred calls since April 9th when the update occured regarding this issue.
    Our current solution is to uninstall 11.7 and install 11.6 -> which works in every browser except for Google Chrome (as they just released a new auto update yesterday that forces the pepper flash plugin to be 11.7)
    Please release an update that fixes this issue.
    We submitted a bug to the development team on the 10th, but have received no response regarding if/and or when this might be fixed.
    Our thoughts are that the new security updates have messed up some backwards compatability.
    I'd really prefer to not spend months repogramming our website to use html5 instead of flash... so please address this issue imediatley.
    It seems that youtube was having a similar issue as us, so hopefully their cloat encourages a solution.

    Hi,
    For those regarding iSpring user, we spent a lot of time in debugging that too.
    here are the pieces we got and hope it helps.
    The audio would got cut off once you tried to unload as2 swf. According to the SwfLoader doc, it would try to cut off all resources if possible (including audio object...). And it seems that their new flash player 11.7 would try to forcefully clear out stuffs that it shouldn't
    Our hackaround is to call the netstream.seek() to trigger the sound again. Playing sound object doesn't work
    Please adobe!! help us to keep our job here. It would be poor for us by just releasing a player without knowing which part of the backward compatibilities that it is about to break but just post a note on the page to say it may break something old.
    Thanks,
    Venant

  • Webcast problems with Flash Player 11.7.700.169 and IE9

    I recently started to have problems viewing slides during webcasts from TalkPoint/Lightwave.  I have Windows 7 64-bit and IE9 (both 32-bit and 64-bit).  When the webcas starts, the audio is fine, but the slides are not shown.  If I remove Flash Player, I can see the slides.  With Flash Player installed, I can view the webcast fine in Chrome and Firefox, but not IE9.  Looks like another incompatiblity between Flash Player and IE9.  Does anyone have a solution/workaround or should I try to download an earlier version of Flash Player.  Perhpas IE10 is a fix.

    I'm having the same issue; non-HTML5 videos won't play. Specifically they start for a couple seconds and then freeze. I'm running Windows XP and Firefox.. I tried de-selecting hardware acceleration, increased the local storage, and I don't know what else to do. XP, Firefox, and Flash are all the latest versions.
    This has only been for the last 2-3 weeks, and the only things that have changed are updated Flash, updated Firefox, and supervisor installed Norton while I was on vacation.
    Please, any suggestions?
    ETA: And just like that, it's working! I think that I probably should have restarted the computer after changing my settings yesterday. Or not; still confused but relieved.

  • Windows 8 + IE10 + Flash Player 11.7.700.224 = ???

    Hello all.
    I've read uncountable pages so far, but none of them could represent the issue I am facing.
    The investigation goes with the following sequence of installation:
    1. Clean Windows 8 x64 OS
    2. Updated VGA driver
    3. Update for Internet Explorer Flash Player for Windows 8 x64-based systems (KB2847928)
    4. Set IE10 to use "desktop mode" only
    After proceeding this way, when checking Flash Player "about page":
    When opening "Flash Player (32-bit)" in Control Panel:
    In IE10 Add-ons Manager:
    When browsing, it is possible to open Flash content withou problems.
    The only annoyance is the ActiveX control is not recognized by the settings manager at all.
    This is so obvious, since the application looks for the plug-in instead, as if there were no ActiveX in the system.
    Is the ActiveX now "hidden" after the most recent update so that users do not mess around, or is this behaviour somehow awkward?

    When I did what you suggested, the videos start to load -- I see about 3 seconds or so and then I get a
    "video player error" message on a black screen.  I tried 5 different videos with the same result; some played a few seconds longer than the others.  I also upgraded to Firefox 22, but that seemed to have no effect on anything with this.

  • Adobe Flash Player 11.7.700.202 Help!!

    Adobe Flash Player 11.7.700.202
    I have downloaded
    Adobe Flash Player 11.7.700.202 and it came back download successful. NoNoNo next time I wanted to a view a video it says to download FP again. It is listed in my computer. Does anyone have any sugestions or have had the same problem !!

    See
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • I updated to flash 11.7.700.224 and now cannot play DoubleDown Casino Slots while in Facebook.

    Anyone know why I can no longer play DoubleDown Casino Slots while in Facebook after upgrading to Flash 11.7.700.224?

    I did not have any Macromedia file in syetem 32 when I last replied to your question. I had uninstalled FP 11.8, but my embedded FP on Windows 8 was (and is) still showing in Control Panel Items but did not and does not appear when checking version on the Adobe Find Version page.
    Before reading your last reply, I did UNinstall 11.8 and then installed flashplayer_11_7_plugin_debug   (FP 11.7.700.232).
    This NOW shows up as Shockwave Flash ver. 11.7.700.232 in mozilla add-ons manager and is listed in system32 as a folder: C:\Windows\system32\Macromed with many files in the folder.
    The Flash Player 11.7.700.232 worked on Mozilla FF 22.0 for several hours before not being able to play some flash content and then crashed. An odd window kept appearing while trying to use it, I did not copy the test of it, but will try and reproduce the problem, and copy and post the text here in a further discussion box on our discussion.  A subsequent check to Adobe Find Version page shows that FP 11.7.700.232 is CURRENTLY installed and functoning. But it still does not play all Flash content that I encounter on the internet.
    I did NOT use the Adobe Full Installer to install Flash Player 11.7.700.232, I simply downloaded the file to desktop and manually installed it off line.
    If I DO need to uninstall FP 11.7.700.232, and reinstall it using the Adobe Full Installer, please tell me in detail how because I thought that the Full Installer had a different version of FP in it.
    What I mean is, if I download and run the Full Installer, is that also simultaneously installing a different version of FP? Or do I run it and THEN install FP 11.7.700.232?
    Thank you for following along and replying, Pat. I am not very literate with PC's and the problem is likely something that I am doing wrong!

  • I installed Adobe Flash Player 11.7.700.169 onto my Macbook Air (OS 10.7.5) and when I went onto website it still read that I need update. I've tried 3x and still same message.

    I successfully installed Adobe Flash Player 11.7.700.169 onto my Macbook Air 2012 (OS 10.7.5) and when I went onto website (Morrision Planetarium-California Academy of Science) it still read that I need update. I've tried 3x and still same message.  Is there something I am doing wrong?  Quite frustrating!

    If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 4.
    1. If you're getting a "blocked plug-in" error, then from the menu bar select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Check Now. Quit and relaunch your browser.
    2. Triple-click the line below to select it:
    /Library/Internet Plug-Ins
    Right-click or control-click the highlighted text and select
    Services ▹ Open
    from the contextual menu. A folder should open. Delete the following item, or anything with a similar name, if present:
    Flash Player (failing).plugin  
    You may be prompted for your login password.
    3. Re-download and reinstall Flash. Download it from this page:
    Adobe - Install Adobe Flash Player
    Never download a Flash update from anywhere else.
    4. If you get a "missing plug-in" error, select
    Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked Enable plug-ins.
    5. Select
    Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.
    6. In the Safari preference window, select
    Privacy ▹ Remove All Website Data
    Close the window. Then select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.

Maybe you are looking for

  • Errors downloading apps....HELP

    I am trying to download the new rotate me application, but everytime i try there is an error, (online certificate error, contact application supplier) i tried putting the date back to an earlier stage i tried turning online certificate check off i tr

  • Exception on JaxRpc invoking a Siebel web service

    Hi, We've created a web service on Siebel 7.8, activated it, and generated a wsdl. I've imported that wsdl into my BPEL project (10.1.3.1), created a PartnerLink from it, but I'm getting an exception when I attempt to query Siebel. If anyone is famil

  • Refer to a Word document in Excel

    Hello everybody,. I have a big word document and a shorter excel document. My Excel document has the same parts as the word document. What I would like for example, is to have hyperlinks in a column for each row, refering to the corresponding word pa

  • Photo with wrong date and time in icloud

    i tried to upload some old photo on icloud photo via PC (windows 7) however the time of photos shown is 15 hours faster than it was capture. Do anyone can tell me how to solve it? i want to add back all my old photos from my iphone 4 to my new iphone

  • Is there any possibility to see full details about the event?

    ipad calendar:I have no chance to read the event location fully on my ipad. It is cut and finishes with "...", thus very important meeting  number cannot be seen. Is there any possibility to see full details about the event?