Flash sound setting for internet publishing

Dear Friends,
iam creating elearning lessons and trying to upload in internet. Please advice me what sound setting should i keep. Now iam keeping in publish setting, 24kbps. with "convert stereo to mono". But iam getting disturbance in the swf output. The mp3 sound iam inserting is very clear (format is 16bit, stereo, 44100hz). But iam getting disturbance in output.
Pls advice me what is the correct sound setting for web based swf lessons.
Thanks in advance,
Syed

Dear Mr.kglad,
Thanks for the reply. Native settings means, my mp3 vo is 16 bit, stereo, 44100hz for this what should i keep in publish settings? pls advice me. for ur info, this 16bit stereo, i have made, actually they recorded as 16bit, mono. Now iam importing as stereo.
my issue is same as http://www.newgrounds.com/portal/view/553963 this pls check this link. This is not my lesson. while browcing i foudn this. this same as my problem. when i listen in fla file its good.. after press control enter and made as swf iam geting the distubance and bad quality in vo.
thanks and regards,
syed

Similar Messages

Setting for Internet

HI
I have several 1-3 minute clips of bands playing in clubs and I cannot get a good compression with good sound quality and video that doesn't interlace. Whenever I try to encode it as a mp4 compressor starts up and then with a split second gives me a fail message? I hear that mp4 is the best setting for high quality clips on the internet but I just cannot get compressor to do it. I would like to have the clips to be 5- 10 mb in sixe, does anyone have any settings they could reccomend? Thanks

Hi,
To change proxy server settings.
Click the Tools button, and then click Internet Options.
Click the Connections tab, and then click LAN settings.
uncheck the Use a proxy server for your LAN check box..
Sudheer MCP,MCSA(Server 2012)

Sound Setting for "Silent" or "Vibrate Only"?

I'm new to the iPhone, having bought an iPhone 4 last week. I'm looking for a way to control the sounds with a little more granularity. Or maybe I'm just missing something. Here are some things I'd like to do:
1. Turn off the "outgoing SMS message" sound. Keep the incoming SMS sound on.
2. Be able to easily put the phone into "Vibrate" mode. All sounds turn to vibrate.
3. Be able to put the phone into "Silent" mode. Keep it on, but no sounds at all.
If anyone can point me in the right direction, I'd be very grateful.

See what the manual says about sounds http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf , page 159
Sounds and the Ring/Silent Switch
Switch between ring and silent mode: Flip the Ring/Silent switch on the side of iPhone.
When set to silent, iPhone doesn’t play any ring, alert, or effects sounds. It does, however, play alarms set using Clock.
Note: In some countries or regions, the sound effects for Camera and Voice Memos are played even if the Ring/Silent switch is set to silent.
Set whether iPhone vibrates when you get a call: Choose Sounds. To set whether iPhone vibrates in silent mode, turn Vibrate under Silent on or off. To set whether iPhone vibrates in ring mode, turn Vibrate under Ring on or off.
Adjust the ringer and alerts volume: Choose Sounds and drag the slider. Or, if no song or video is playing and you aren’t on a call, use the volume buttons on the side of iPhone.
Set the ringtone: Choose Sounds > Ringtone.
Set alert and effects sounds: Choose Sounds and turn items on or off under Ring . When the Ring/Silent switch is set to ring, iPhone plays sounds for alerts and effects that are turned on.
You can set iPhone to play a sound whenever you:
Get a call
Get a text message
Get a voicemail message
Get an email message
Send an email message...
So,
1) not possible to have only one sound for SMS out/in
2) use the ring/silent switch
3) Alarms set by your clock will have sound, even in silent mode (ring/silent switch switch active)
Message was edited by: Ingo2711

Export Setting for Internet... Which one?

I am exporting from LiveType. When I import into iMovie, the font looks much lighter, and the shadow more pronounced.
The trailer is going to be published on the internet. Which export settings etc. do I choose? They are all greek to me.
Thanks for your help. (Sorry... I'm an old analog editor!)

Well, Flash is the most obiquitous format, but you can't export it from Apple software, you need third party software to do this... Telestream's Episode Pro, or Sorenson's pro Flash codec works nicely as well.
Next IMHO, would be h.264, but this presumes the viewer will have installed QuickTime 7 (there's one for macs and one for PC's too and it's free). The presets work quite well for this, and what you need to decide is the bit rate. Assuming your viewers will have a fast connection, you can use the higher bit rates. It's a matter of deciding how fat a stream you can deal with ( the fatter the better quality, however the slower it downloads of course)
Most of the world is PC's so if your viewers are likely to be on that platform, then WMF's might make the most sense, but again, you'll need third party software to make them. Flip4Mac seems to be the preferred software here.
Jerry

What need more setting for internet explorer

Hi All,
My application developed in 10g developer suit ,Application server is configured. The url which I am using run in mozila 3 , If i ipen it
in simple internet explore, It did not show. Please let me know which changes required to run this url in internet explorer.
Thanks

Forms 10g supported ONLY by IE 6 OR IE 7 with OS XP This is not exactly correct. Please be careful when making statement such as this. The client certified platform information can be found here:
<blockquote>http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BABGCBHA</blockquote>
Determining exactly which JRE (or Jinitiator) version will be used is partially determined by the following settings in formsweb.cfg. In most cases, if you look at them carefully you should be able to determine what the values you need should be. The following example will show how to use JRE 1.6.0_33. This will require Forms 10.1.2.3 and IE8 or FF3.5
baseHTMLJInitiator=basejpi.htm
jpi_classid=clsid:CAFEEFAC-0016-0000-0033-ABCDEFFEDCBA
jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_33
# The complete list of values for jpi_codebase can be found here:
# http://www.oracle.com/technetwork/java/javase/autodownload-140472.html
jpi_codebase=http://javadl-esd.sun.com/update/1.6.0/jinstall-6u33-windows-i586.cab#Version=1,6,0,33
jpi_download_page=http://www.oracle.com/technetwork/java/javase/downloads.

Proxy setting for Internet Explorer

Recently purchased new CPU with Windows 8.1. I am not able to access Explorer. I get an error message about proxy settings. How do I change this?

Hi,
To change proxy server settings.
Click the Tools button, and then click Internet Options.
Click the Connections tab, and then click LAN settings.
uncheck the Use a proxy server for your LAN check box..
Sudheer MCP,MCSA(Server 2012)

How to make advance setting for internet apple tv

im strugling to connect my apple tv to the hotel wifi i must encode the password but before that i need to encod also the username which is not available from apple tv set up it only lead u to password. `is there any other option to set up the wifi?

You can not use ATV on WiFi networks that require a web signin if that is what is being asked.

Where to find download Flash Player ActiveX 11.7.700.169 for internet explorer 9

Only IE 9 browswers with ActiveX flash Player 11.7.700.169 are working on our company.
I´m working as technical systemadministrator and manage 1000 computers who have problem with flash player.
Where can i find archived version of flash player ActiveX for internet explorer?
Here is what i find:
http://helpx.adobe.com/se/flash-player/kb/archived-flash-player-versions.html
But there is no Flash player 11.7.700.169 ActiveX for Internet Explorer - where can i find that?
- please help me the situtation is horrible, no one can work with their webbased applications.

Thanks!!
These are the unzip files.
-Which one is ActiveX for Internet Explorer?
Please see my screenshot

How can I know if the version of Flash Player installed is the right version for Internet Explorer?

Hello,
I have Windows 7 Starter with Internet Explorer 8 and Adobe Flash Player 10,1,85,3.
I am experiencing problems with one particular web site which uses Flash technology to operate its web site., which is:
gadget-detective.moonfruit.com.
It has been suggested to me that I check I have installed the correct Flash Player for the web browser
I am using which is Internet Explorer 8, that in particular I should check I have not installed in error a Flash Player
for "other browsers". I do not know how to check if the version of Flash Player I have installed is the correct one for
Internet Explorer, but, when I go to the Adobe web site at:
http://www.adobe.com/software/flash/about/
it states that Flash Player is successfully installed.
Here are the problems I have been encountering with accessing the above-mentioned "gadget-detective" web site,
where I have had to use different URLs to attempt to get access to the technical advice areas on their web site:
1)A Welcome page with a link to the Free Technical Advice page located someway down the centre of the Welcome page,
but still with none of the previous links along the left side:
http://www.gadget-detective.moonfruit.com/#/free-tech-advice/4515074362
2)A Welcome page with no links at the left side and in particular no link at all to the Free Technical Advice page:
http://www.gadgetdetective.com/
3)A completely black page:
http://gadget-detective.moonfruit.com/#/free-tech-advice/4537230823
How can I be certain that I have the correct version of Flash Player for my web browser Internet Explorer 8?
Regards.

Hello ʇɐb ɹəuəllıʍ ,
Thanks for your reply. I would appreciate it if you could let me know what the Flash Player setting
called "Hardware Acceleration" does, before I try disabling it.
Regards.

No sound when accessing internet video (i.e. youtube, Skype, flash, etc)

No sound when accessing internet video (i.e. youtube, Skype, flash, etc). It says I am missing a driver but not sure where to get it without paying $30 for something that shouldnt be missing in the first place.

Hi,
Try the following.
Download and install Firefox and then using Firefox, download and install the latest version of Adobe Flash.
Close all browser windows before running the Flash installer.
Launch Firefox and see if the videos play Ok - if they do, close Firefox, open IE and click on the same Adobe Flash link above to get a prompt to install the ActiveX component. When done, restart IE.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

My iPhone 4s no longer has sound for any of the applications but it does have sound for phone functions. Where is the setting for app sound? I have gone to the multitask screen and the volume bar is empty.

I recently found my phone outside in light rain (it had been there about 20 minutes). It had some glitches at first, however after letting it rest overnight it seemed to mostly recover. The one problem I am having is that I no longer have sound for any of my applications. I do have sound for phone fuctions, and I am able to use the speaker for phone functions.
When I am in my applications, including music/videos, the only way I can hear is if I use my earbuds. I am able to make a video and it will record sound just fine.
When I go to the multitask screen, the volume bar is empty and I cannot adjust it using the side buttons (even though in settings I have that feature activated). I completely reset all of my settings tonight and that did not make a difference.
Is there a setting I am missing, or am I just SOL? I am trying to avoid having to get a whole new phone but it is very frustrating to not have sound with my applications.

Hi Baileyfour,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
There are two places where vibrations can be set.
One is the Settings > Sounds
The other area is Settings > Notifications
If you have an app set to Alert, it may have a vibration set for it.
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
I hope this information helps ....
Have a great day!
- Judy

I can not get real audio player to record videos from the internet, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

dont know what to do

Best setting for 3D content for Flash

Hello all. I am a Premiere noob that works in Cinema 4D. I am exporting C4D animations as QuickTime "animation" files. (.mov) These videos are highly detailed pixel-precise renders. I want to bring them into Premier with this level of pixel precision, yet I cant seem to find the correct setting to ensure they import and play back "ice cold." They tend to look slightly blurry in the preview. The renders are for a specific flash size and are set to 874x480.
Can someone help me with the correct setting for the movie? Please... The content is so beautiful, I don't want to sacrifice any quality. I have the latest version of PP. Thank you for any help you can give.

Thanks for the help sir. This is actually for a huge project. I'll post the link here in a week or so. Be sure to check it out. We're all good now. Ice cold. - No blurriness. Its too bad I was able to do this years ago without any issue. Video codec's and technology sure have changed drastically in the past few years. There's a real learning curve for those who are not daily users.
-B
A side note I learned in this process: Cinema 4D users should not export their Quciktime (.mov) files from Premiere Pro as Uncompressed AVI. It just screws up the pixel precision. Not sure why. Just use the old school .avi and the advice above. The renders will be perfect.

How do you change a device's name in the sound setting? For example, Let's say I want to change " logo headset" to "log microphone." Please help it's urgent!

How do you change a device's name in the sound setting? For example, Let's say I want to change " logo headset" to "log microphone." I need to do this in order for Rosetta Stone to recognize my USB Logitech headset. I'm extremely confused. Please, just help.

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
You can also post in your installed os section of the message board.

Flash sound setting for internet publishing

Similar Messages

Maybe you are looking for