Flash wont "register" On XP sp3 using IE7 but works fine on Safari

Hi,
I lost flash a while ago on my desktop I do not even remeber how long ago. I just downloaded safari and used that for things that need flash like youtube and such.
I would really like to fix this so it will work with Internet Explorer again however. I have read several help letters posted and tried to uninstall and reinstall and reboot many times and look for the killbit all sorts of things but no luck. When I go to control panel and click on the flash icon it says flash is installed for the safari but not for IE the version for safari is 10.3.181.34 when I am doing the install for IE it runs to 53 percent and then fails and says "error failed to register". I have ran malwarebytes and avg and ccleaner and avast antivirus thinking it had to be some sort of malware, but no difference.
If someone would take me by the hand and tell me step by step what to do to diagnose and fix this I would be estatic. So thanks in advance for any and all help offered.
Jim III

I will give this a try, I saw this before but did not do it because the "note" says it is in the "uninstaller" so that info led me astray I will post back on my results. Thanks for the quick help.
Solution
Warning! By following the directions below, you will modify the Windows System Registry. A mistake could cause serious system damage, which may require you to reinstall your operating system.
If you are not comfortable editing the registry, get help from your system administrator or another IT professional.
If you choose to proceed, first back up your entire hard drive, and create a Windows System Restore Point.
Adobe Systems cannot be held responsible for damage resulting from your following these instructions.
Note: The following solution is not required for Flash Player 10 and above. These registry changes were included in the Flash Player uninstaller and can be downloaded here.
Make sure you are logged into a Windows Administrator account. If you are not, you will not be able to use SubInACL.
Download SubInACL from the Microsoft Download Center.
Follow the installation instructions. Make sure you install SubInACL (subinacl.exe) to the directory C:\Program Files\Windows Resource Kits\Tools.
Download the reset_fp10.zip file.
Open the fp10.zip file and extract the reset_fp10.cmd file to the directory C:\Program Files\Windows Resource Kits\Tools\.
Both this file and SubInACL (subinacl.exe) must be in this directory.
Double-click reset_fp10.cmd. A command window will open, and SubInACL will run.
Do not use the machine while SubInACL is running.
After SubInACL finishes, you will see a prompt "Press any key to continue".
Install Flash Player from the Flash Player download page.
To confirm that your installation succeeded, visit the About Flash Player page. At the top of the screen, you should see a message that reads "Adobe Flash Player Successfully Installed."

Similar Messages

Why would links or search bars on the top half of the page not work on any site when i use firefox but work fine in IE?

links and search bars on the top half of pages dont work and its not that i click them and they dont work but it wont let me click them its like it doesnt see them

Recently, the Yahoo Toolbar and the Babylon extension have been reported to cause that problem. They seem to overlap invisibly over the top of the web page display. If you have either or both, uninstall or disable them/it, or see if an update is available that solves the problem.
*See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*See --> http://kb.mozillazine.org/Uninstalling_toolbars
If that does not solve the problem:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Lr2 wont edit in pse7 on desk top but works fine on lap top

Hi again
Question I put pse7 and lr2 on at the same time on both machines. My lap top gives me the option to edit in pse7 but my desk top does not. I installed them the same way. Does anyone know why on my desk top does not give me this option or how to turn it on??
Thanks for your help
Randy

You will need to supply details about your system really.
You can also contact Tech Support for this.

Newest version of flash player not playing in newest version of google chrome but works fine in IE

newest version of flash player not playing in newest version of google chrome but works fine in IE

jennifer.jones214 wrote:
In your opinion, should I uninstall Firefox if I am installing Waterfox?
Waterfox can coexist peacefully with Waterfox. I have both installed, but never use Firefox any more.
Not only can Waterfox run in 64-bit address space, it also is better optimized during compile time than Firefox. (For obvious reasons; Firefox is compatible with many old systems, Waterfox only needs to be compatible with new 64-bit systems.)
P.S. regarding Chris' advice above; Firefox and Waterfox use the same profile, so if that is actually the problem, then it will occur in both browsers.

FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ? Any solution * Advance Thanks

FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ?
Any solution * Advance Thanks

FCP X will import into separate clips every time it detects a scene change (as when you stopped and started recording in the camera). There is no option to avoid this, as far as I known.
You may try importing from camera using Quicktime Player X and then bringing the imported file into FCP X.

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

I have a Finger Print Reader on my Laptop and when I go to a logon screen it says this is not a logon screen and will not allow me to use my Finger Print Reader to logon. When I use IE it works fine.

I have a Finger Print Reader on my Laptop and when I go to a logon screen it says this not a logon screen and will not allow me to use my Finger Print Reader to logon. When I use IE it works fine. Can u please help me with this its the only negative I fined with Firefox everything else is AWESOME!! Thanks, Anthony

The driver I have is the most recent version. This is a Firefox problem....fix it!
It works perfectly on Internet Explorer and worked on Firefox before the last update so it's your problem.

I try to log in to password protected sites and nothing happens but works fine on Internet Explorer. Can't get past login page. I even had to use Internet Explorer to login to ask this question!

I try to log in to password protected sites and nothing happens but works fine on Internet Explorer. Can't get past log in page. I even had to use Internet Explorer to login to ask this question!
On the page where you enter username and password after entering and pressing "Log in" the page just stays in place. If you look at the error log you see
"Warning: Unknown property 'border-radius'. Declaration dropped.
Source File: https://support.mozilla.com/media/css/common-min.css?build=3fabbc0
Line: 1"

Make sure that you do not block the referrer.
* http://kb.mozillazine.org/network.http.sendRefererHeader
Also make sure that you do not block cookies in Firefox or the firewall.
* [[Cookies]]
* [[Enabling and disabling cookies]]

HT4759 computer seems to not access icloud. started today. using outlook. email works fine.

PC does not seem to contact icloud. started today. using outlook.email works fine.

Sync of your calendar requires Microsoft of work with internet standards, in this case CALDAV. Microsoft have a 20 year or more inability to work with standards, apparently interoperability is not a goal at Microsoft.
So either use Microsoft products to talk to Microsoft web sites, or Use a procider that can work with web standards. Yahoo and Google are the obvious others.
Make sure to request CALDAV from Microsoft however, they will not learn their customers are unhappy if you do not tell them

Flash won't register for IE8 on xp sp3 home edition, but works in Firefox

Windows XP SP3 fully patched (32bit), IE8.0.6001.18702, Firefox 3.6.3, Eset NOD 4.0.437.0, Comodo Firewall 3.9.95478.509
I've been trying to sort this out on and off for the last three weeks...nothing I do seems to remedy the problem.
I had version 10.0.32.18 installed and running. I tried to install the updated 10e version of flash player and since then haven't been able to get FP working with IE8. The Firefox plugin wouldn't work with the 10e version, but seems to work fine with the later 10h installation.
I've read the articles in the support literature (tn 19166, 19148, 4da116d3, etc.) about installation and followed all the recommendations, numerous times.
I've run the uninstaller, also the special uninstaller for CS5 & pre-release version. I've run the subinacl tool. I've attempted installation using the online download manager, and using the downloaded ax.exe installer. I've attempted to open a new user account and install the FP there.
Always the FP fails to register.
As you know, the default admin account in unavailable in xp home edition, even when you right click on a file and attempt to "run as", you can only access the established user accounts... I am installing from one of those, an administrative account, with full access. I attempted to install from safe mode with networking. (the default admin account). That didn't work either. I've added what were missing registry keys (the D27 clsid and typelib entries, and given them full access), after reading the advice in this post.(http://forums.adobe.com/message/2924210?tstart=0) Still no luck...
I'm out of ideas...
I wonder why the latest installer wouldn't write the missing D27 registry keys on its own, if those are required and were missing...Isn't an installer supposed to write registry keys for the product it's installing?
Anyway, I'd love to work this out, as I prefer to have a fully functional versiion of IE8 on my system, and without a FP, it's missing something...
I am running Eset NOD32 as an AV, and Comodo IS with only the firewall and Defense+ working, but I have attempted installation with them both disabled, as well as actually uninstalling the comodo firewall from the system...
The only other active security measure is Windows Defender, though I have some non-resident anti-malware and anti-spyware scanners installed, they are not running processes. (MBAM & SAS). I had WinPatrol running, but disabled it while I attempt to work through this issue.
I'm about to do a clean install of xp just to get flash working....that seems a little extreme to me...everything else runs flawlessly...but I'm open to ideas...and welcome experienced advice that will lead me to a solution...Thanks in advance for any time you spend with this...
ps the windows/system32/macromed/flash entries after an installation include these files:
The latest installation log is:
=O====== M/10.1.53.64 2010-06-25+17-44-43.125 ========
0000 [I] 00000010 "C:\Documents and Settings\Owner\Desktop\newest_install_flash_player_ax.exe"
0001 [W] 00001036 Software\Macromedia\FlashPlayer\SafeVersions/10.0 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0003 [W] 00001036 Software\Macromedia\FlashPlayer\SafeVersions/10.0 2
0004 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
0005 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash10h.ocx
0006 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10h_ActiveX.exe
0007 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10h_ActiveX.dll
0008 [W] 00001032 C:\WINDOWS\system32\Macromed\Flash\Flash10h.ocx 80070005
0009 [I] 00000018
0010 [E] 00001032 C:\WINDOWS\system32\Macromed\Flash\Flash10h.ocx 80070005
=X====== M/10.1.53.64 2010-06-25+17-44-50.484 ========

Thanks for your response...
I can wait. After all, it was by waiting for the release of the 10h version after the 10e version sabotaged my flash installation, that I was eventually able to at least get Firefox up and running flash again...
It's just frustrating to think that the folks at Adobe can't come up with a better product testing cycle so they are unleashing these problems on end users systems...
I recognize that there may be some sort of issue with my particular system registry. If so, I wish I knew what it was...but flash releases are the only installations I ever have any difficulty with...All of the other software I run updates without failing....sad to say...
Perhaps I will try running a home edition version of secedit (See here)http://support.microsoft.com/kb/313222 instead of the clean or repair install...I'll let you know what I decide and how it works out...
Anyway, thanks for the input..

Images do not load after XP SP3 install. IE works fine :-(

I installed XP SP3 last night and now images do not load in web pages. Not all images do not load but Players photos on PGATOUR.com and item images on Ebay and item images on Amazon.com. You can click the images in Ebay you get a popup window with grey type saying 'Image is not available. I just updated Firefox, Updated Adobe per Firefox recomendation, updated Java per firefox recomendation but still no images.
Hate to go back to IE as I have been very happy with FireFox.

Here is the error i get when i run Debug (ctrl+Shift+Enter)
It works fine inside of flash but outside of flash or the published swf calls an error.
Attempting to launch and connect to Player using URL C:\Users\oussiden\Documents\flash tutorial\imgmove\test3.swf
[SWF] C:\Users\oussiden\Documents\flash tutorial\imgmove\test3.swf - 83667 bytes after decompression
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
when i troubleshoot i found that when i comment the second line out the error disapears.
myLoader.load(new URLRequest("img/pictures.xml"));
myLoader.addEventListener(Event.COMPLETE, image.processXML); // when i comment this out the error disapears

Flash 13.0.0.214 does NOT work on some sites, but works fine on all others

Hi!
I watch several wildlife nest-cams every day running Windows 8 using Firefox 29.0.1, but yesterday morning, (after I'd already watched the 6 cams I view every day), I started getting a solid, black screen with, "Error loading plugin: Plugin file not found", on TWO of these sites.
My attempts to resolve the problem were:
1. Checked all the other web-cam sites I view daily, and there's only a problem on 2 of them.
2. Went to You Tube, Facebook & other similar sites and I can view streaming media.
3. Refreshed pages-when that didn't help, I closed & reopened Firefox & still 2 sites with "plugin loading error"
4. Completely shut-down my laptop & rebooted.
5. Did "System Restore" to earlier in the day when ALL web-cam sites were working.
6. Went to Adobe Flash site & verified that I had the most current version...I do, & I saw the animations on Flash site.
7. Verified my Flash Plugins in Firefox...AGAIN...they're all activated & up-to-date
8. Checked & re-checked ALL the web-cam sites I view every day, (for, at least the 10th time), and the
     same 2 sites are still showing the "Error loading plugin: Plugin file not found" on a black screen. Even
     though the video isn't seen the "chat" area is functioning, (I don't know if that's important, but I
     thought I should mention it).
9. I posted the issue on Firefox's Forum but no one has an answer since Flash works everywhere except
     for 2 sites.
I've tried everything I can think of to troubleshoot this, but as you can see, I've had no success in solving this "mystery".
As for the 2 sites I can't view, they are:
                                    http://www.pixcontroller.com/eagles/    And
                                    http://www.westmorelandconservancy.org/BlueBirdWebcam-1.htm
I've been watching these sites for MONTHS, so why I can't view them all of a sudden, well, I'm clueless, (I guess you already figured that out...ha ha ha). I was watching the 2 sites listed above early yesterday morning, then when I looked at one of the other cams I view and came back to these 2 sites, I got the "error message".
I hope you have a solution for me, as I'm desperate! I'm WAY behind in my documentation for these 2 sites, so hopefully you'll have an easy answer. If it's a technical thing, please use LOTS of details, as I'm not very technically inclined.
Thanks in advance for your help!
Best Regards,
DogPal
P.S. I just checked on another site that offers many different wildlife cams, & I CAN view the "Pittsburgh Bald Eagles" if I go through: http://www.ustream.tv/channel/pittsburgh-bald-eagles    I'm sure this means something, but since I don't understand this technical stuff I don't know what that is! (I told you I'm clueless!)
Message was edited by: Donna ....I had additional information

First, thank you for a very good and detailed description of your problem; so few people provide any information when asking for help.
Trying to reproduce; the first of your links works fine on Firefox, PaleMoon, and Internet Explorer.
The second link only shows a blue screen after the ad (on the same three browsers)
What is your installed Flash Player version? See Flash Player Help | Flash Player Help
Can you also try on a different browser such as Internet Explorer?

My Macbook Pro keeps freezing/crashing after a few seconds of use, but works fine in safe mode.

I've researched this extensively, but I haven't been able to solve my problem yet.
It started completely out of the blue with a kernel panic, where my screen seemed to malfunction and I got the kernel panic message (but I could hardly read it because of distorted graphics). I forced my laptop to shut down, but every time I rebooted and used it again it would completely freeze after a while (the amount of time varied, it has lasted from a few seconds to a couple of hours). What happens essentially is that the cursor and entire OS freezes, and I'm unable to click on anything or use the keyboard. The fans start working full speed and the only thing I can do is force the laptop to shut down.
At first I thought it was a Chrome problem because it only happened after I opened the browser. After uninstalling it, the laptop seemed to work fine for a couple of hours, but then it froze again while I was using Safari. Ever since it has been functioning normally for smaller and smaller time periods before freezing again. I've tried reinstalling Snow Leopard OS from the original disc and then downloading all software updates, but the problem continues. I've also tried doing a hardware test by pressing D as the computer starts up, but for some reason it doesn't work.
The laptop, including Chrome and Safari, works fine in safe mode.
I'm sorry I don't know what specific information to give you about my laptop/OS, but please ask anything you need to know. I'd greatly appreciate any help — I'm panicking because I fly to England tomorrow morning to start university and I really don't want to go without a laptop for 2 weeks while it's getting fixed!

Thanks for your reply! Here are the Etrecheck results.
Hardware Information:
          MacBook Pro (15-inch, Early 2011)
          MacBook Pro - model: MacBookPro8,2
          1 2 GHz Intel Core i7 CPU: 4 cores
          4 GB RAM
Video Information:
          AMD Radeon HD 6490M - VRAM: 256 MB
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:51:36
Disk Information:
          ST9500325ASG disk0 : (465.76 GB)
                    (null) (disk0s1) <not mounted>: 200 MB
                    Macintosh HD (disk0s2) /: 465.44 GB (339.98 GB free)
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple, Inc. MacBook Pro
Kernel Extensions:
Problem System Launch Daemons:
          [not loaded] org.samba.winbindd.plist
Problem System Launch Agents:
          [failed] com.apple.Kerberos.renew.plist
Launch Daemons:
          [not loaded] com.adobe.fpsaud.plist
          [not loaded] com.google.keystone.daemon.plist
          [not loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [not loaded] com.divx.dms.agent.plist
          [not loaded] com.divx.update.agent.plist
          [not loaded] com.google.keystone.agent.plist
          [not loaded] com.hp.devicemonitor.plist
          [not loaded] com.hp.messagecenter.launcher.plist
          [not loaded] com.quark.quarkupdate.agent.plist
          [not loaded] net.culater.SIMBL.Agent.plist
User Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [not loaded] com.facebook.videochat.elenicourea.plist
          [not loaded] com.spotify.webhelper.plist
          [not loaded] net.infinite-labs.SIMBLEnablerForSandboxedApps.plist
User Login Items:
          Flux
          GrowlHelperApp
          iTunesHelper
          Flux
          The Lion King Circle of Life.mp3
          Dropbox
3rd Party Preference Panes:
          Flash Player
          Flip4Mac WMV
          Perian
Internet Plug-ins:
          AdobeAAMDetect.plugin
          DirectorShockwave.plugin
          DivX Web Player.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          googletalkbrowserplugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          npgtpo3dautoplugin.plugin
          o1dbrowserplugin.plugin
          OVSHelper.plugin
          QuickTime Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
          Picasa.plugin
Bad Fonts:
          None
Top Processes by CPU:
              44%          Google Chrome
              28%          WindowServer
              10%          EtreCheck
               7%          syslogd
               2%          hidd
               2%          Bluetooth File Exchange
               1%          fontd
               0%          Finder
               0%          SystemUIServer
               0%          JavaApplicationStub
Top Processes by Memory:
          210 MB             Google Chrome
          111 MB             JavaApplicationStub
          57 MB              Finder
          49 MB              Dock
          42 MB              Google Chrome Helper
          41 MB              SystemUIServer
          41 MB              WindowServer
          41 MB              Bluetooth File Exchange
          41 MB              quicklookd
          41 MB              EtreCheck
Virtual Memory Statistics
          382 MB             Free RAM
          1.01 GB            Active RAM
          518 MB             Inactive RAM
          2.10 GB            Wired RAM
          461 MB             Page-ins
          364 KB             Page-outs

Why does Shockwave Flash "stop responding" only around 1-3 pm? Works fine mornings and evenings.

For the past couple of weeks I've been having this issue. Everything works fine all morning, and then mid-afternoon, Mozilla goes haywire and I get an "unresponsive plugin" error message, telling me Shockwave Flash "has stopped responding". It derails my entire computer system, everything ends up "not responding" (every single window, tab, program, even pictures and Word documents) then after I spend half an hour moving at the speed of molasses to save, close, and restart things, then it continues working just fine for the rest of the evening. It ONLY happens around 1 to 3 pm.
It's aggravating to say the least. And I can't figure out why. Everything I have from Adobe is up to date, all of my plugins in general are up to date, and I've been using the same exact websites for work for years but this has only cropped up recently.
Any ideas? Should I just take a long lunch and avoid my computer from 1 to 3?
PS: I'm the only person home, and my wifi requires a password, so it's my internet service fighting a crowd or anything.

I'm not paying for Norton for the toolbar, I like the Internet Security options in general.
It has this "Vault" that stores all your website passwords, and "Identity Cards" to store financial information, addresses, etc. I feel safer having this information stored in Norton (which I gave the most unique and secure password I could think of) rather than storing these details on individual websites.
Heaven forbid anyone ever steal my computer, they won't be able to access ANYTHING unless they can hack into Norton, which is the only password I hand-type. Before I got it, I used to have Firefox save it for me, but there was no security in that. Anybody could open up, say, Amazon.com, and log right into my account, and instantly have access to my credit card and change the mailing address. Using Norton Internet Security, they can't get into any of my accounts (shopping, banking, email, etc), and even if they do, they won't find any sensitive info available.
As for Firefox 22, I just clicked "update" the other day (before then canceling) because it specifically said the plugin wasn't available, and I need it for the options I just mentioned. The next time it prompts me, I'll look again and see if it's ready yet.

Adobe flash doesn't work for streaming music on Firefox 10.2 but worked fine on 10.0

I listen to streaming radio. It uses flash. Worked fine on Firefox 10.0. I just updated to 10.1.2 and now no streaming radio.

Hi dolejast,
We have a [https://support.mozilla.org/en-US/kb/firefox-crashes-or-flash-plugin-crashes troubleshooting section for Flash] that might help. It provides a lot of good information for the most common flash related issues.
Hopefully this helps!

Flash wont "register" On XP sp3 using IE7 but works fine on Safari

Similar Messages

Maybe you are looking for