Flashbuilder 4 how to create custom folders in component explorer

Hi, I was wondering if anyone knew how to create my own folder in the components explorer? I know that when I create a new component it gets added under "custom", but I want to create my own folder and insert an image next to the component. I've searched everywhere and cannot find a solution. Thanks in advance!

I tried that and no go. This was the only tutorial I could find on the subject but it didn't work.
http://groups.adobe.com/posts/aac1e13143

Similar Messages

  • How to create custom(or) user defined component in SAPTAO

    Hi,
       Please provide me some document or steps on how to create custom component in sap tao.
    Thanks a lot in advance.
    Regards,
    Sudha

    Hi,
    If you want create any custom components, you should use SAP QTP to create it.
    Here are the simple steps:
    i) Go to QTP -> Click on New - > Select Scripted Component - > ((Select SAP_Doc) area (i.e. whatever application area you have created for SAP TAO installation)) -> Record or Write a script based on your requirement & save
    ii) Go to QC -> BPT -> open above component and insert the parameters and call these values in QTP script level (either way you can do)
    iii)  Create a datasheet and declare the parameters in datasheet and call this sheet whenever you have required.
    Good luck.
    Ram

  • How to create custom calendar in webdynpro ABAP.....(WDA)

    Hi,
    How to create custom calendar in Webdynpro Abap ?.
    Regards,
    Narasimha

    The best way I see here is to develop your custom calender in any of the UI technologies supported like Flash (flex) or HTML5 (or maybe even SilverLight? not sure) and embed it in your WD view. You can also handle interactions between the embedded component and the WD controller.
    Regards,
    Raghavendra

  • How to create repository folders to various file systems

    Hi
    How to create repository folders for various filesystems,and allow the user to do access those files(checkin/checkout)
    Prasad

    Please explain further.
    You can create a file system repository for each of the file systems.
    The document approval workflow is a functionality which is already available withing the portal.
    However, be aware that the file system repository does not support custom properties and versioning.
    In that case you might want to use a CM respository in the FSDB mode which lets you store metadata on the portal and the actual files on the file server.
    Regards,
    Vibhu

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • How to create custom content placeholder in sharepoint 2013

    Hi, I would like to create custom content placeholder don't know how to and add to my custom master page in sharepoint 2013. I have no luck searching on how to create custom content placeholder, any help?
    Thanks,
    Johnweb

    Hi,
    If you’re not fixed your requirement with the Out of the box SharePoint place holders, you can create as many as you want as long as the ID doesn’t conflict. On the master page add the content place holder 
    <asp:ContentPlaceHolderid="CustomName" runat="server"></asp:ContentPlaceHolder> and add this to your page layout
    <asp:Contentrunat="server" ContentPlaceHolderID="CustomName"></asp:Content>.
    I suggest you provide your basic requirement for further research.
    If you want to customize a master page, the Rajendra's method would be helpful.
    Best Regards,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to create custom adapter for Products and CommerceService

    Hi guys!
    First of all I wanted to say that I did search. Only relevant material I found was this http://dev.day.com/docs/en/cq/5-5/ecommerce/eCommerce-framework.html
    Unfortunately it doesn't go in details enough...
    I'm trying to follow geometrixx-outdoors example to create my shoppingCart. I have a list of of products in /etc/commerce/products.... referenced by productPage in content.
    But I don't know how to create custom CommerceProvider and Adapter to create proper Product objects - it always picks up geoProductImpl.
    As I understand I need to specify cq:commerceProvider to myProvider and then I need to somehow register MyProvider so it gets picked up.
    Also I guess I need to add MyProductAdapter somehow  so when shoppingCart executes following it returns my implementation instead of geoProductImpl.
    Product product = productResource.adaptTo(Product.class);
    I'd really appreciate if anyone could share an example or point me in the right direction for a guide.
    Cheers
    Kostya

    Hi Kostya,
        Look at this presentation recorded at http://dev.day.com/ddc/en/gems/commerce-framework.html
    Thanks,
    Sham

  • How Tou2026 Create Custom Application in E-Commerce 7.0?

    Hi all,
    We want to set up SAP E-Commerce for ERP 7.0. For SAP E-Commerce for ERP 5.0 the following configuration guide is available:
    How Tou2026 Create Custom Application in E-Commerce 5.0
    What about SAP E-Commerce for ERP 7.0? Is this guideline also valid for 7.0?
    If not, where can I find the corresponding configuration guideline for SAP E-Commerce for ERP 7.0 (on the SAP Service Marketplace?)?
    Thanks in advance.
    Regards,
    AV

    Hello Av,
    Please see the Development and extension guide @
    http://service.sap.com/crm-inst
    => Release 7.0
    => Operate
    Regards
    Mark

  • How to create custom report in crm 2013

    Hi,
    I want to create custom report in crm 2013. I want to show Contact information in report. My scenario is that when I select multiple record and run report then contact information show in different pages. I want to show record in textbox in report. Here
    is an example of display record

    Hi Aamir,
    Have a look at below link it shows step by step how to create custom SSRS report.
    http://www.njevity.com/blog/creating-dynamics-crm-2011-reports-sql-reporting-services-pre-filtering-and-default-filters
    It tells using fetchxml, you can use SQL query as well. You need to use pre filtering to run report on selected record.
    Thanks,
    Prasad
    Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.

  • How to create custom report plugin using child region report metadata

    Hi,
    I want to ask for help on how to create custom report plugin using child region report metadata. My idea is to create a child region, a classic report and set the condition to never.
    Then i will query the child report metadata from apex view and use it to create a custom report like using jquery jq-grid. Any idea how i can create a process that will use the child report
    metadata? I dont know how i can create a process just like how apex work, how apex render report, coz i want it to be control using the standard apex report attribute. This plugin will
    render according to the child report attribute.
    Is there anybody here had ever done this?

    Hi Nicolette,
    Thanks for the reply. I know where to find the metadata, just asking for idea on how the rendering process will be.
    Start from determining column heading, column order until finish rendering the report. The same way how apex
    render the classic report.
    Previously this imy my rendering process:
    FUNCTION GETCOLUMN(P_REGION IN APEX_PLUGIN.T_REGION,
                         P_PLUGIN IN APEX_PLUGIN.T_PLUGIN,
                         P_VALUE  IN VARCHAR2) RETURN SYS.DBMS_SQL.DESC_TAB2 IS
        VSQLHANDLER     APEX_PLUGIN_UTIL.T_SQL_HANDLER;
        VCOLCOUNT       NUMBER;
        VCOLNAMES       VARCHAR2(2000);
        VAJAXIDENTIFIER VARCHAR2(100);
        VPAGESIZE       TYPEATTR := P_REGION.ATTRIBUTE_04;
        VJSCODE         VARCHAR2(32767);
      BEGIN
        VSQLHANDLER := APEX_PLUGIN_UTIL.GET_SQL_HANDLER(P_SQL_STATEMENT  => 'select * from s_emp',
                                                        P_MIN_COLUMNS    => 1,
                                                        P_MAX_COLUMNS    => 999,
                                                        P_COMPONENT_NAME => P_REGION.ID);
        VCOLCOUNT := VSQLHANDLER.COLUMN_LIST.COUNT();
        FOR I IN 1 .. VCOLCOUNT LOOP
          VCOLNAMES := VCOLNAMES || '{name: "' ||
                       UPPER(VSQLHANDLER.COLUMN_LIST(I).COL_NAME) || '",';
        END LOOP;
        APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
        RETURN VSQLHANDLER.COLUMN_LIST;
      EXCEPTION
        WHEN OTHERS THEN
          APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
          RAISE;
      END GETCOLUMN;
    So this is how i get the header for my report plugin. The same method is use to get the value / data for each column. This process is work. So now
    i want to extend my plugin so that i will use all attributes from the child report to render my plugin. So the column header, column order, all will depend
    on the child report. And the column display condition is set, it will also check the condition before render the column. Sounds like i want to reinvent
    the normal apex rendering process but this is what i want to achieve.
    I need help to find the correct logic for my render process. Don't want too much for starting, just want to render the plugin correctly, same with child report,
    same columns alias, column ordering and column  conditional display.
    Thanks,
    akulala

  • How we create custom infotype and how to configure with its subtypes.

    hai abap-hr gurus,
    how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
    plz help me for this with an example code.
    thanks..
    kiran kumar

    Hi Kiran,
        Please fallow the below steps to create the custom infotype. If you have any quires let me know.
    For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
    then select the `Employee Infotype' radio button
    after that select the `PS Structure Infotype'
    then click on Create… A separate table maintenance window appears
    then Create a PS structure with all the fields you want on the infotype
    Save and Activate the PS structure
    now Go back to the initial screen of PM01
    Click on `All' push button. It takes a few moments
    Click on `Technical Characteristics’. Infotype list screen appears
    Click on `Change'(pencil) button
    Now select your Infotype and click on `Detail' (magnifying glass) button
    Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
    Give your subtype field as subtype field & Save and come back to PM01 initial screen
    Click on `Infotype Characteristics' … Infotype list screen appears
    Click on `Change' (pencil) button & on New Entries
    and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
    to fill yours). Now save ur entries
    Now the Infotype is created and ready to use.
    If you want to change the layout of the Infotype as per your
    requirement…
    In the PM01 initial screen…Select `Screen' radio button and give
    2000 as the screen name, then click on edit.
    In the next screen.. Select `Layout Editor' and click `Change'.
    Screen default layout appears…here you can design/modify the
    screen..change the attributes of the fields..etc.
    Save and activate. (Don't forget to `Activate at every level)
    Regards,
    Ramakrishna kotha.

  • How to create customized F4 Help of InfoObject in BW

    Hi, buddies
    Does anyone know how to create customized F4 help for an InfoObject?
    What I need to do is when user clicks F4 help on the variable screen of query, only certain master data values should be displayed, not all of them.
    Currently, I can only make setting in InfoObject to restrict the F4 value either in master data or in Cube. I couldn't create a customized F4 value list.
    Thanks,
    Wei

    Hi,
    i have H4 Help problem.
    how can i restrict an attributes of infoobject in H4 Help value.
    Please help me
    Madhu

  • How to create custom reports.

    Hi ,
    Could you please let us know how to create custom reports which are data based and not analytics. Which is the best method , is it to devlop reports in sites or integrate with OBIEE reports. could you please let us know the best practices for this approach.
    Thank you,
    Sashank P.

    Hi Jiri ,
    Thanks a lot for your support. Below are my answers for the request:
    1) what data you want to report on? Is it data from a database? file system? Web service outputs?
    Ans : The Data would be mostly from Database only.
    2) what is the overall purpose of your solution?
    Ans: The overall purpose of this solution is to generate reports with sorting capability and should be able to export in different format documents.
    3) what is your architecture?
    Ans :
    4) why Sites?
    Ans: The customers login into our site and can be able to view the different reports and the present site is already a webcenter site. and the reporting capability is an enhancement .
    Can you please provide the right approach here. We have an option of using ADF or even we can use Webcenter Portals. So which would be the best approach to go. And can you please guide us any approach or examples for integrating Webcenter Portals and Sites and even integrating ADf with Sites.
    Thank you,
    Sashank P.

  • How to create Mail Folders?

    Question
    Does anyone know how to create mail folders for oganizing the inbox? I can't figure it out, but likely, the answer will be "you can't".
    I'm not using an IMAP mail host, I have a pop account with Yahoo!Mail.
    Any help is appreciated...
    Thanks.

    I can't figure it out, but likely, the answer will be "you can't".
    How'd you know?
    No, you cannot create folders on POP mail accounts on the iPhone. Let Apple know you would like to be able to do that.
    http://www.apple.com/feedback/iphone.html

  • How to create customer master data for walking customer in retail

    hi experts !!!!!!
    for retail industry e.g books trading industry
    how to create customer master data for walking customer in retail
    its dummy or one time customer
    if i create one time customer then same customer number can i use for every new order and every new customer how ?????
    thanks

    Dear Hanumant,
    As per my view,,
    You can use one time customer functionality to full fill your requirement.
    When you create sales order with one time customer system take you to the customer data maintanence screen through that you can maintain the one time customer data.
    Same one time customer number you can use for every new order through maintaining different data.
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Dec 19, 2008 6:08 AM

Maybe you are looking for