Flex Application showing no errors in Eclipse but not executing either

Hello,
I am trying to develop an application in flex/BlazeDS/Java in eclipse and my problem is since my changes in the code are not reflected anymore during runtime of the application. There is no error received from eclipse when I try to clean the project. It is deployed correctly but it seems to be working with the old code and not reflecting the changes. I tried to put the breakpoint too but it says, 'breakpoint cannot be placed here because there is not executable code in this line'
Please advice.
Best Regards,
Jai Kishan Shah

Hello,
Well, i never re-install the FlexBuilder (stand-alone, or eclipse-plugin) because any error.
Your output folder in Flex Build Path on your Project Properties is correct? Other question, you are working with Java ? Many times the project have a "error" on configuration and the directory to deploy is not listen by web-server.
Exemple:
If i work with Java and my CATALINA_HOME is: C:\tomcat\ - My webapps is localizated on: C:\tomcat\webapps\MYWEBAPP\ but my output folder on FlexProject is: C:\MyProject\Flex\bin-debug, and i run the application, the application dont work...
So.. can you show your configuration? Its more easy to understand your problem and help you.
Regards

Similar Messages

My photoshop application showing the error Your Product licence has expired

My photoshop application showing the error Your Product licence has expired

Without more details, sounds like you need to call Customer Support.

After writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present

after writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present.
My pc is based on asus motherboard. Labview 7 and Windows 2000 sp4 installed.
The error message continue also if i stop the application that generated report on a: .
I've got this problem only on a pc: on other machines i don't have this problem (Labview only continues to access floppy but it doesn't show any window).
Find below an example: first press the button to create a report on a: then remove the floppy, after 30-35 sec i've got the error message
Attachments:
prova.vi ‏55 KB

Hi,
I tried your vi: I don't get any error message after removing the disk but LV7 keeps on accessing the drive at regular intervals even if you stop the vi and close it!!! This is not supposed to happen.
The only way to stop it is exit LV7.
If you don't use the file dialog and you wire a full path, you don't get any problem.
I also created a very simple vi that conditionally writes a text file on a: and I got the same behaviour.
This problem occurs only with LV7, I tried the same examples in LV6.1 and everything was fine.
If anybody wants to try I attach this simple example,
Alberto
Attachments:
salva_testo1.vi ‏22 KB

My ipod shows up on my desktop, but not in itunes 7.

Let me start out by saying I've never had any itunes + ipod probems before. Everything has run smoothly up until now.
Last week I upgraded my OS to 10.4.7 because I had been running on 10.2.8 since 2001 and itunes wouldn't let me download albums containing music videos. So I decided it was time for the upgrade. I also upgraded to itunes 7 and had been previously using itunes 6. This is when the problems started. Now whenever I plug my ipod into my computer with my firewire cord, my ipod shows up on my desktop, but not in itunes and I am completely clueless on what to do. No error messages pop up or anything. My ipod charges and that's about it. I tried doing the 5 R's, but none of that helps. I have a feeling it's itunes's problem and not my ipod's. I was thinking that maybe if I uninstall itunes 7 and re-install 6, everyting would work again; but I don't know how to uninstall itunes and I don't want to risk losing my library. I'd just like for itunes 7 to recognise my ipod and update it. Can anyone help me?

My iPod is a click wheel...I think that's fifth generation?
I've always used my firewire cable to update my iPod. I've tried using USB in the past but for some reason it always says that my iPod has low battery and won't let me update it, so I just use firewire. Can I not use firewire with itunes 7?
I'll try using the USB again. It's laying around here somewhere. Just gotta find it.

Fonts showing up in Font Book, but not in other apps

This morning, while rummaging through Font Book for something new to use, I discovered that some of my (large) collection of fonts did not show up in various programs... meaning I never think of using them unless I'm actually rummaging through Font Book.
I got onto the Apple support forums and looked at why this might be. I discovered that some of my fonts, for various reasons, were only in the "User" folder, while some that were listed in "All Fonts" were NOT showing up in the User folder. Cleaning this up seemed like a good place to start. I quit Font Book and all other programs, went to /Library/Fonts and ~/Library/Fonts, and moved all the fonts in the User folder into the All folder, as suggested on some answers here. (In addition I changed my Font Book prefs so that new additions in the future will not go to the User folder, but to the main folder and be usable to all.)
Then, also following answers here,
—I did a Safe Mode reboot
—rebooted again out of Safe Mode
—removed font cache files through Terminal
—and finally checked Font Book.
The screen shot above shows that all fonts are under "All Fonts" now, instead of some showing up only under All and some, oddly, only under User, as it was before I started the cleanup. Nice and neat. There is no User folder anymore, and I assume that is because it has no contents—User gets what All gets. Seemed like everything worked.
So I opened one of the programs I use to take notes (Microsoft Entourage), just for a quick check...
... and discovered that some fonts which *have* always been usable, are now not showing up. (On the plus side, however, some of those fonts which had been hidden to me—ones that I discovered in my morning rummage—are showing up, so half of what I was aiming for is working.)
I read a few more support forum posts, and saw that some folks have success when they remove the fontbook .plist. So I did this as well, and checked everything again.
Font Book itself is still nice and neat, and appears to be complete, but Entourage and TextEdit, which I chose to be representatives of how this font cleanup is working in real programs, still do not show all my fonts. And stranger still, though most of their problems are the same, each of the programs also has different fonts which are or aren't showing up!! For instance: Aviano Slab, shown highlighted in the screenshot, isn't visible in either program, but Aviano Flare, right above it, is visible/usable in TextEdit but not visible/not usable in Entourage.
Now, to be clear, as far as I know all of my typefaces are currently showing up in Font Book, and about 95% of my fonts are visible in both Entourage and Text Edit, even though the 5% that's problematic is partially the same/ partially different in each. I hope I'm not going to have to open every single program I own to keep checking for variations—hopefully knowing that there *are* variations between programs will help someone to give me a suggestion.
If the 5% that don't work were the exact same, I was going to assume Mac voodoo. My lame workaround was going to be, to manually check my font folder against one program or the other, and copy every font that doesn't show up, back into the User folder. It would take quite a while, and there would be two copies, but at least the ones that are not visible to my programs would (hopefully?) be visible again.
But the ones that don't show up and therefore can't be used are not all the same. So this indicates worse voodoo, some sort of font management issue that I don't get, and it probably means I'd be at this check-and-copy thing forever with each and every program I use. Or, I could waste a lot of disk space, and copy all fonts to User. Ugh.
So I'm hoping that by laying out everything I *have* already tried this morning, someone will be able to spot a step I missed that will help me get Font Book to wrangle these darned typefaces better.
If Font Book *thinks* all fonts are now available to all users, how can I get my programs to agree—and get my programs also to "see" and let me use all of my fonts?
MacBook Pro, Mac OS X (10.7.5)
Font Book version 3

Okay!
So, should anyone else ever find themselves with this weird problem, here's what the rest of my day looked like—and yes, I did at last get the problems solved.
First I printed out a list of all my fonts (in the /Library/Fonts folder). Very long. Then I skimmed through the two programs standing in, hopefully, for every program, to try and see if something the problem fonts have in common would jump out at me.
One thing did: all of the "problem" fonts in TextEdit (the ones that didn't show up, in other words) were from a period when one of the type companies I use was automatically installing to a subfolder within the font folder (named with their company's name). Though TextEdit "sees" all the fonts in the Microsoft subfolder, apparently it can't handle other subfolders. So I removed all of these fonts from the company subfolder to the main /Fonts folder, and solved one problem. This problem, oddly, must have been there all along, but who uses a ton of fonts in TextEdit? So I didn't notice the problem until I was troubleshooting today, and thinking that was a nice neutral program to test things in.
But it did nothing for the problem in Entourage, which is where I began my day—even though *some* of Entourage's problem fonts were also in that subfolder, most were not, and the ones that were in that subfolder were still not made visible to Entourage by moving them out of it. So then I scrubbed the long, long list of fonts, looking for all the ones that were not visible in Entourage. Blech. That took a while.
When I got my complete list of missing fonts, I went back to Font Book and validated all of those fonts. I discovered that all but one, share one tiny problem: the "'name' table structure" error. (The final font did have a minor error in validation, but not that error.)
Now I didn't make a list early this morning, so I can't be sure that every one of these fonts was among the ones that started my attempt to clean up and make things right, but I'm assuming they are. I suppose it's possible that during the things I tried to fix the mess today, that one or two fonts actually started working on their own, but probably this list would be the same as one I could have made in the morning, back when I was young and innocent and thought I wouldn't need lists because it was all going to work with ease.
Before I got too excited, I then stopped and validated all the fonts I have. I wanted to make sure that this wasn't an error tons of fonts of mine have, in which case I had not located the problem. But in fact, only the typefaces I couldn't see in Entourage had this error. So I went back to the www to search for what to do about this error.
And in case anyone else needs to replicate my success, this is the site with the fix that worked for me on it:
http://www.iwebss.com/tech/540-fixing-fonts-with-validation-errors-on-mac
Skip down to where it says "Quick Instructions." Download the program suggested there, and do *exactly* what it says under Quick Instructions and no more (and please, make a folder with copies of any otfs or ttfs you need to do this with before you try the fix, in case it doesn't work for you as it did for me and you need to back up to the old versions).
One note: in those instructions, he doesn't mention that after "Save As," the program may hang up and give you a nasty message about access—just go to the Finder and do a Force Quit, no need to report, open the program again, and carry on. You haven't harmed the font or the program, and it does save before hanging up, so you can just go on to the next font in your list. For some miraculous reason, doing this does repair the "'name' table structure" error (and the error that the one odd font had as well!), and when I reopened Font Book, Entourage, and just for good measure, TextEdit, all of the fonts which had been plaguing me were perfectly visible and absolutely functional.
Thank you, Kurt, for your good ideas here and elsewhere on these forums. You were of great help to me today even before your answered this question. Though I was so deep in troubleshooting that I didn't get back to see your latest reply, I appreciate your taking the time to try to guess at this very odd hiccup.
Why this error bothers some programs and not others... why it's so easy to fix, with a simple program that you purposely use to make absolutely no changes... who knows. But check your subfolders first, and if that's not the problem, try validating fonts and see if the "'name' table structure" error is at the root of your problems. Perhaps this will work for others.

I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
thanks
john

Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
tt2

5th gen ipod shows up in my computer but not itunes

my 30gb 5th gen ipod shows up in my computer but not in itunes. ive seen the stuff about this but im positive the problem is with the ipod and not my computer.
i run several other ipod through my computer with no trouble and i had my freind try to run it on his with no luck.
any help would be greatly appreciated.

One possible reason...
iPod shows up in Windows but not in iTunes
http://docs.info.apple.com/article.html?artnum=93716
Patrick

IPod Classic shows up in My Computer, but not in iTunes

My iPod Classic shows up in My Computer, but not in iTunes. I've gone through the troubleshooting guide, reset it 3 times and put it in disk mode, reinstalled and updated iTunes and still nothing.

Hey there april_lee!
I have a website for you that can walk you through the troubleshooting steps on your iPod classic. This will help you determine the source of your issue and hopefully get the iPod working for you consistently again. The website can be found right here:
Apple - Support - iPod - iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Thanks for using the Apple Support Communities!
Cheers,
Braden

I purchased a text tone from Itunes. It shows up in my library, but not as a text tone. Is there a way for me to set it as a text tone for all texts? Or I am stuck with factory settings?

I purchased a text tone from Itunes. It shows up in my library, but not as a text tone. Is there a way for me to set it as a text tone for all texts? Or I am stuck with factory settings?

So it is conseidered a customized text tones even if it was purchased through iTunes? Confusing. Since I bought it through itunes as a text tone I assumed it would work. OOOPS
Thanks so much

HT201302 When i open up itunes on my computer, it says that i have 2 videos but when i sync it and check my ipod touch, it says i have no videos so it only shows up on my computer but not on my iPod touch and its a 4th Generation.

When i open up itunes on my computer, it says that i have 2 videos but when i sync it and check my ipod touch, it says i have no videos so it only shows up on my computer but not on my iPod touch and its a 4th Generation.

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

HT201272 Hi guys...I have just got a new computer and want to get my library back up and running on it. However I seem to be missing some of my iTunes music purchases. Any ideas on how to get them back? They show up on my ipad but not my actual itunes acc

Hi guys...I have just got a new computer and want to get my library back up and running on it. However I seem to be missing some of my iTunes music purchases. Any ideas on how to get them back? They show up on my ipad but not my actual itunes account.

Hello there, Capricious13.
There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

How do you know what the data usage was for and why? It shows you date and usage but not the reason.

How can you see what data usage was for on the bill? It only shows the date and usage but not the reason for the usage.

You can not see this info on VZW's site. There are apps for smartphones that will break down the info though, but by site or what was downloaded

SpryHiddenRegion error in IE7 but not FireFox

Here is a copy of the code and the errors I get. Does anyone
have any ideas why this would happen in IE only?
<div spry:region='dsPages' class="SpryHiddenRegion"
style="height:350px; overflow:auto;">
<div spry:state='loading'>Loading data...</div>
<div spry:state='error'>Failed to load
data.</div>
<table spry:state='ready' class="mylist">
<tr id="top">
<th onClick="dsPages.sort('id');">ID</th>
<th onClick="dsPages.sort('name');">NAME</th>
</tr>
<tbody spry:repeatchildren='dsPages'
spry:choose="choose">
<tr spry:when="{id} == selectedID"
class="SelectedLastClass" id="{ds_RowID}"
onClick="dsPages.setCurrentRow('{ds_RowID}');pagesSelect({id});"
spry:hover='HoverClass' spry:select='SelectedClass'>
<td>{id} </td>
<td>{name} </td>
</tr>
<tr spry:default="default" id="{ds_RowID}"
onClick="dsPages.setCurrentRow('{ds_RowID}');pagesSelect({id});"
spry:hover='HoverClass' spry:select='SelectedClass'>
<td>{id} </td>
<td>{name} </td>
</tr>
</tbody>
</table>
</div>
ERROR:
expected ':'
and
Spry.Data.updateRegion(spryregion1) caught an exception:
[object Error]
Thanks for your help.
Jim

i have reduced the code to the following:
<script type="text/javascript">
dsPages = new
Spry.Data.XMLDataSet('views/pages/getdata_pages.cfm',
'/dataset/row', {useCache: false});
</script>
<div spry:region='dsPages' class="SpryHiddenRegion"
style="height:350px; overflow:auto;">
<div spry:state='loading'>Loading data...</div>
<div spry:state='error'>Failed to load
data.</div>
<table spry:state='ready' class="mylist">
</table>
</div>
and i get the following error in IE but not FireFox:
Spry.Data.updateRegion(spryregion1) caught an exception:
[object Error]

Applet Works in Eclipse but not Online?

I've got everything working in eclipse but now when I uploaded it to unix it wouldn't run. Any ideas? I chmod 664 all the java and class files. It won't print to the TextArea for some reason when I uploaded it.
Here is my source
http://www2.hawaii.edu/~akinsey/CD.java
http://www2.hawaii.edu/~akinsey/CDStorage.java
http://www2.hawaii.edu/~akinsey/CDStorage.html
That will all compile and run in eclipse but doesn't work online :(

If it runs in Eclipse, but not when deployed, the problem is probably classpath or security related. This is why those of us who use Eclipse in real production work, rarely use its builds. I always build with ANT and never run from within Eclipse. I alway use what Eclipse calls an "Externally Launched Server".

My iphone apps shows price in indian rupees but not in dollars. My selected region and address is USA? How can i change it to dollar again

my iphone apps shows price in indian rupees but not in dollars. My selected region and address is USA? How can i change it to dollar again

my iphone apps shows price in indian rupees but not in dollars. My selected region and address is USA? How can i change it to dollar again

Flex Application showing no errors in Eclipse but not executing either

Similar Messages

Maybe you are looking for