Flexisign pro won't cut/plot .eps

i created a design in illustrator and attempted to export it in parts as .eps so i could cut/plot it using flexisign. 2 of the 4 parts would cut/plot but the other 2 would not. i don't know why or how it happened to cut 2 and not the others since they were from the same original design. i made a cherry with a rebel flag x and a stem w/ leaf for a friend. the stem and leaf both cut but the cherry and rebel flag x didn't. i used illustrator cs4 and saved as .eps illustrator 8 and cut/plot using flexisign pro 6.5
also, where can i go to learn illustrator better. all the sites i find with tutorials only help with non-plotting subjects for illustrator and i am concerned with learning how to use illustrator to plot. for all other things i use photoshop which i have a book on and many years experience.

Well like drop shadows, inner glows, feather any of the photoshop effects anything that has ti be screened that is reproduced in process or halftone etc. gradients, gradient mesh that kind of thing.
I do not think a cutter would understand it and would simply dismiss the art object as not being something that can be plotted.

Similar Messages

Fianl Cut Pro won't open! I trashed prefs and done a clean install severall times. Pls help

Fianl Cut Pro won't open! I trashed prefs and done a clean install severall times. when i open final cut it loads all the plugins then stops responding, i then have to force quit it.

FCP X has only been out for 7 months! Or are you using FCP 7 ?
Anyway it sounds as though you have probably done something recently.
What have you recently updated or what new apps and plugins have you installed?
When you trashed the preferences did you do it correctly using this app
http://www.digitalrebellion.com/prefman/
Before you reinstalled it did you completely uninstall it using
http://www.digitalrebellion.com/fcsremover/

Final Cut Pro won't open

Hi All,
Please bear with me as I'm new to this forum.
Final Cut Pro won't open on my computer and as a message, a window appear and says:
"the waver form cache files folder does not have read/write access. Please select a new folder in the system setting dialogue or correct the problem on disk".
I don't have access to the dialogue box at anytime because when I turn on FCP and this message appears, when I click "OK", FCP turns off. I have tried to open it through the icone but the same message comes back again.
Can someone help me?
Thanks a lot!

I never suggested repairing the boot disk.
I should have been more specific in my suggestions.
In my experience the best way to repair permissions via Disk Utility is to restart the computer in safe boot mode/repair permissions/restart.
It is my understanding that running Disk Utility without a safe boot is less than effective.
I do think this process is better than running DU from the OS disk but there are worst case scenarios where it must be done. The original posting probably doesn't apply to this situation.

Help! My final cut pro won't export or share

My final cut pro won't export or share just keeps saying 'The operation could not be completed. (com.apple.compressor.compressorkit.errordomain error -1)
Anyone got any ideas how to fix this?
Thanks

Is App Nap disabled for FCP X? In finder, select FCP X, get info, uncheck the app nap box.
We need to knwo alot more in order to be abvle to help you - What ver. FCP X? What ver. OS X? Your hardware?
Look at these links:
http://www.larryjordan.biz/fcp-x-advanced-trouble-shooting/
http://www.lafcpug.org/Tutorials/basic_fcpx_share_export.html
http://fcpx.tv/Pages/shareexport.html
can you post a screen shot of your open app? What are your project settings? What are your export settings?
Good Luck --

Installed a ATI Radeon HD 5770, now Final Cut Pro won't even open - says 0mb Vram?

Installed a ATI Radeon HD 5770, now Final Cut Pro won't even open - says 0mb Vram? Only dvi port work the two mini's not at all. Bad card? Macpro 3,1

I would guess there is a a corrupt media in the project. You could also try to copy a part of it to new project which is shorter and see what happens. 5 Hours is extremely long. Best to divide it to smaller sections.

Macbook Pro won't start properly... keeps restarting without chime!

Macbook Pro won't start properly... keeps restarting without chime!
Late 2007 Macbook pro. OS upgrade worked great for me.
I have had this problem on and off for a month or so. I simply cannot figure out what the issue is. I have tried poerup with and without AC power and with/without battery installed.
Starting in Safe mode does not help.
Trying to start with a disk does not help.
It sort of seems like it might be an internal power issue or GPU issue.
It also feels sort of like a software compatibility issue since my Macbook Pro gets reallly slugish for no apparent reason sometimes and IU have to restart.
I have three different anti-virus programs so I doubt it is a virus issue.
I noticed all this start after I did a Mountain Lion upgrade and then tried to start up VMware Fusion. Fusion seemed to just bog down the computer horribly but did not cause a system crash.
I need to edit an important sequence on Final Cut Pro and don't want it to freeze me out!
Anyone who has had this problem and resolved it please let me know
God bless

Systematically run through this list of fixes.
..Step by Step to fix your Mac
If it doesnt chine it doesn't mean much, the mute could be on or you installed a anti-chime software.

Sketchbook Pro won't color in scanned images?

Sketchbook Pro won't color in scanned images, even though it said it could. I'm making an animated movie, and this is a huge obstacle. We've tried calling autodesk, but they just won't give us a clear cut answer. If any one knows any info on it, it would help a lot

well, most of my scanned images are imported as JPG's, and exported as .tiffs, and they're put in final cut express. The problem is that when I put it in sketchbook pro, and make a layer beneath to color, it doesn't color it...
Thank you for your help

2008 Mac Pro random power cut+boot issues

Hello everyone,
I'd like to describe a problem I've been having and see if it tweaks any ideas as to what the issue might be.
In 2008, I purchased a Mac Pro 2x2.8. It's got 4gb ram (2x 1gb Hynix and 2x 1gb Kingston), 320gb, 1tb and 160gb sata's and a ATI 4870 graphics card. Up until about 3 months ago, everything has been dandy - it's the best computer I've ever had, however recently I've been having some intermittent problems that may be related, or separate.
Problem 1: In the morning when I turn it on, on some occasions it will power on for 5 or so seconds, then power right back off again. Sometimes this happens after 5, 10 or even 20 seconds (right in the middle of OS X or Windows boot). The only thing I note is that if it can get as far as the boot selector (hold alt at boot) screen, it won't cut out at that point, only sometimes after I wait a moment then select a boot option. This can sometimes happen 10 or 20 times in a row before it will eventually turn on and function normally.
Problem 2: Random power cut off, sometimes at idle, sometimes while browsing, or using any other app. I can't pin it on any one particular function. I know it's not a temperature problem, I have temp monitors on my menu bar and as far as I can see it's been fairly stable in that regard. Most of the time, I can power up the computer again but very occasionally it will revert to what I described in problem 1.
I have run the apple hardware test, with no errors being produced, and have had the local apple reseller/service centre take a look, with their tech reporting no issues. (He referred to something called ARD being run on a cycle of 20 or 30 times with nothing indicating a problem) I've taken off every non essential piece of hardware, tried with only the stock ram - and the newer ram to no avail of my issues. The only thing that I can still suspect myself is a power issue, however there is another PC in the room that has not had any issues what-so-ever.
Is there anything anyone could suggest I try to pinpoint this issue? It's sending me insane.
Thanks in advance for any help!

I found your post after dropping my G6 off at the Genius Bar - for precisely the same reasons. I've had this issue for the past 6 months on my (early) 2008 dual quad core. A month ago, the power supply entirely died and Apple replaced it. Now the same issue has returned and the computer restarts multiple times on boot up, at different points, sometimes as long as 15-20 minutes after booting up, when everything seems normal. At this point, two people at Apple have given me two different causes. 1) The person on the support phone said it has to be the power controller on the logic board. 2) The person who took in the Mac said it has to be the APS UPS (model ES 750) because the G6 has a 900 watt power supply and the UPS is only rated at 450 watts (750 volt amps). I had already thought of this as a possible cause and had purchased a power consumption indicator called Kill-A-Watt. Guess what? The G6 consumes at most 120 VA. In any case, the UPS fuse would have blown at overload. I don't feel like springing for a 1750 VA UPS unit just on the off chance that this might be the cause. This is also driving me up the wall. Additional info much appreciated if anybody cares to make educated guesses.

My MacBook Pro won't let me mount my external Hard Drive. Just trying to restore my iTunes library.

My MacBook Pro, less than a year old, started acting weird. I backed everything up, took it in to Best Buy, who sent it out to Apple Repair and they put in a new motherboard.
It's running on Mac OS X Version 10.7.4
Now I am trying to put everything back on the computer from my external Maxtor 80GB Hard Drive. MacBook Pro won't recognize the external drive.
I tried Disk Utility. I can see the external drive, and did a repair disk and verify disk. Several times. Each time it says "This partition map seems to be ok."
However, I am not able to mount it, as that option is greyed out and i can't select it.
Also, under the Icon for the external hard drive, it has the Macintosh HD Icon (essentially my computer). I tried to restore this way, didn't work.
I need this to mount, as it has all of my itunes stuff on it; dozens of my sons movies, and my entire iTunes library.
PLEASE HEEEEELP!! HOW CAN I MOUNT THIS EXTERNAL HARD DRIVE? Thank you in advance

Try things in this USB/Firewire faq.
DALE

Acrobat XI Pro Won't Convert 206 Page Word Document into PDF

Hi there
As menetioned above, Acrobat XI Pro Won't Convert my 206 Page Word Document into a PDF. The Word document was originally a PDF file that I converted to Word and it has split all the text into sections.
It sounds like converting a PDF into Word isn't the best way to edit, re-format and then save as a PDF again. I would love to hear your advice on this.
Thanks very much for your help!
Fiona

First before you recreate the PDF from the Word Document.
In word: Open Document
Next open a new Blank docment
switch back to Word click on the ¶ button
scroll to of go to very end of docment.
click just to right of the perion in the last sentence.
now go to very beginning of document
Hold down the Shift and click to the right of first letter in document.
Now choose copy.
Now switch to Blank document
Choose Paste special.
Now choose Text only.
If works all the words will be there spaced correct but with no ¶'s.
Now insert returns as desired.
Now save as a docx file under a different name.
IF you are on a Mac use the following directions:
go to File menu > Print > PDF Hold down PDF button until Context menu pops up.
Choose adobe PDF.
follow steps when the first window opens.
Save as PDF in desired location.
Now open the PDF in Acrobat. Document should be properly formatted and ready to go.
AS you've found The conversion is not seamless. Acrobat doesn't distingish between automatic end of line breaks and Returns and you have to put the pieces back again. I wish Adobe and MS would get over the jealouscy of each other and share howcode works so Thatapplications could work seamlessly together. BUt they never will.

I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

My Premiere Pro won't open and keeps coming up with a 0xc000007b error message!! I have uninstalled

My Premiere Pro won't open and keeps coming up with a 0xc000007b error message!! I have uninstalled and reinstalled it but it will still not open.

It worked for me, any way we have to do following things now, I have seen this happens becasue of the corrupt dll for Visual C++ packages. if the following thing will not work, I am affraid we have to reinstall the windows 7
Good Luck
Try to remove all the Visual C++ 2010 Redistributable and Visual C++ 2008 Redistributable Packages (both x86 and x64) from the Control Panel
Download and install following Visual C++ Redistributable Packages
Microsoft Visual C++ 2008 SP1 Redistributable Package (x86)
Microsoft Visual C++ 2008 SP1 Redistributable Package (x64)
Microsoft Visual C++ 2010 SP1 Redistributable Package (x86)
Microsoft Visual C++ 2010 SP1 Redistributable Package (x64)

My MacBook Pro won't connect to the Internet, but my phone and PC will.

My MacBook Pro won't connect to the Internet. My iPhone has no problem doing so, and neither does my PC. I think it's something to do with my DNS, but I'm not sure. My network connections say that both my Ethernet or FireWire are failed. What's wrong with my MacBook? Is there a simple way to fix this?

Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router.. Any idea how to fix this?

Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

TS1627 iCal on my MacBook Pro won't sync with iCal on the iPhone and visa versa

Just got a new iPhone 5 and now iCal on my MacBook Pro won't sync with iCal on the iPhone and visa versa

Hi Jetjuice!
I have an article that can help you troubleshoot this issue a little further and can provide you with some more steps to take in attempting to resolve this issue:
Sync Services: Advanced troubleshooting for contact and calendar syncing
http://support.apple.com/kb/ts2481
That article has an extensive list of steps to perform in attempting to get the calendar to sync again, and those steps should help you resolve the issue. Thanks for using the Apple Support Communities!
Cheers,
Braden

Flexisign pro won't cut/plot .eps

Similar Messages

Maybe you are looking for