Flicker footage in Premiere Pro CC 2014.2. Tested on different computers. When waiting for fixes this bug?

Flicker appears solely the fault of Premiere Pro CC 2014.2. Tested on different computers. Used as nVidia Quadro and GeForce GTX770. Drivers were different. Everywhere equally evident flicker. Incidentally, it defies logic and may occur at different film pieces. If re-render that flicker may occur on another spot in the video.
It can occur even in the parts without filters !!! But no all time.
ver 2014.2 - win 7 - intel i7-4770 - gtx 770 - flicker!
ver 2014.2 - win 7 - intel i7-4770 - Intel HD Graphics 4600 - flicker!
ver 2014.2 - win 7 - intel i7-2700K - quadro 2000 - flicker!
MERCURY PLAYBACK ENGINE work fine! But still flickering in preview and render.
When waiting for fixes this bug?

Hi Aleksey,
Flicker appears solely the fault of Premiere Pro CC 2014.2. Tested on different computers. Used as nVidia Quadro and GeForce GTX770. Drivers were different.
Have you tried with the Mercury Playback Engine set to "Software Only?" More info please: FAQ: What information should I provide when asking a question on this forum?
Everywhere equally evident flicker. Incidentally, it defies logic and may occur at different film pieces. If re-render that flicker may occur on another spot in the video.
Is this a brand new project or one you updated from an earlier version? What kind of footage are you exporting? Which preset are you using?
When waiting for fixes this bug?
If I can repeat the case here with the same hardware, GPU, and drivers, that would be easier to fix the bug. Currently, I cannot recreate the bug. If you or anyone else can provide me with steps to recreate the bug, that would help immensely. It sounds like this will be the difficult thing.
Thanks,
Kevin

Similar Messages

Flickering footage in Premiere Pro CC 2014 but not in Premiere Pro CC 2013

Hi guys,
I've been having repeated issues with Premiere Pro CC 2014 on Windows. Basically my footage has a weird strobe/flicker when in the suite and when rendered off even although the footage looks fine, unaltered out of the camera. I rendered off the same footage in the 2013 edition of the software and there is no flicker/strobing going on. I've included one of the worst effected shots in CC 2014 and CC 2013 for comparison.I also experience graphical glitches occasionally when rendering. Please watch below:
Premiere Pro CC 2014 - strobing (300% speed, cropped 15%, RGB curve adjustment, software rendered)
YouTube
Premiere Pro CC 2013 - strobing (300% speed, cropped 15%, RGB curve adjustment, software rendered)
Premiere Pro CC 2013 - no flickering - YouTube
The footage was shot on a Nikon D3200 at 1080p 25fps, aperture 3.5, shutter 1/50, ISO 400.
Editing on a
Dell Optiplex 9020
Intel i5-4570 3.2 Ghz
4 gb Ram
Intel HD Graphics 4600
Windows 7
Has anyone else experienced this issue? My suspicion is an issue with either my graphics card or insufficient RAM.

Thanks for posting that info. This mirrors the issues I'm seeing with DSLR footage.
It's so hit or miss if it's going to flicker. I'll delete renders and re-render and certain clips will be fine, others are now flickering. I tried to make a test project that demonstrated this issue, but couldn't reproduce the effect. RGB Curves and Three Way CC are in my list of effects, as well, where I see the issue.
Just curious, is anyone else working on projects started in other versions/computers? I've seen it on project started in PPro CC and finished in CC'14. Saw it again on a project started on Mac in FCP7, converted to CC'14 Win7. Quite honestly, I haven't been starting projects myself in CC'14 because of the flicker issues.
As a workaround, I was hoping to import the CC'14 project back into CC or Media Encoder CC, but no luck there.
Another issue I've had with CC'14 includes converting a CC project to CC'14, giving it to a CC'14 Mac user and the A/V sync is lost. We abandoned that collaboration all together because of the issues. CC'14 has been incredibly unproductive to my workflow, despite the great interface update and various other features added. I haven't had mystery issues like this since CS4. I'm keeping our post team in CC as much as possible until the issues are resolved.
-JB

Re-interpreted footage metadata is lost when moving Premiere Pro CC 2014 project file to different computer

Hi guys,
I believe this is just a bug in Premiere Pro CC 2014 (and other versions in the past), but I wanted to make sure it was on the PP team's plate for the next update, since it's detrimental to a workflow that include more than one computer or more than one editor on a project.
My team shoots a lot of footage in slow-motion (for instance, 59.94 for 23.976). Premiere's process to conform this footage is great. Modify -> Interpret Footage -> Assume this frame rate: "23.976".
Unfortunately, when we move this project file to another system, even if we are using a hard-drive that is synced to have the exact same source media files with the exact same file structure, we lose the footage interpretation metadata. Premiere Pro CC thinks this footage is 59.94 again, and our sequences are in shambles. All clips where the interpretation metadata is lost have "zebra pin stripes" on them wherever they exist in our sequences.
We have to manually re-interpret the footage, and then sometimes manually re-select in and out points. This is a work-around that enables us to push forward, but it's a barrier that makes collaborative editing extremely challenging and opens up rampant possibility for error. It's hard to locate every clip we need to re-interpret in some of our more complex projects, and even harder to avoid re-interpreting the wrong clips.
Looking forward to a resolution to this problem.
Daniel Lichtenberg
[ad/link removed by moderator]

Guys I solved my own problem - thought I'd share with you how in case anyone else is having this problem -
I came across this thread
Premiere Pro CC error message and crash
which had the suggestion -
"Do tou have after effects installed? If yes, please try to import the main sequence into it and then export it as premier pro project from file/export ootion and then try to open that in premiere pro."
This didn't work for me too but I did try and import my existing project into a new project and copy all the files over. Works fine now.
I don't know if I will have the same issue again tomorrow so I'm going to render out a super high res video before I close premiere just in case

Rendering white flicker on the program monitor and output video file. How to get rid of this flicker in adobe premiere pro cc 2014?

Hello,
I have been working with long sequences in adobe premiere pro cc 2014. All of sudden, I see white flicker in the program monitor and rendered output too. The flicker does not follow any pattern. It is very random.
How to work around on this?
Regards
Naveen Alle

Concurrently working on the same project it requires a specific implementation in all editing programs like Avid's Unity/ ISIS shared storage. That's what you are simply not considering. none of your issues would be any problem if your projects resided on a commonly accessed server or something like that. Check respective hardware solutions.
Mylenium

Premiere Pro CC 2014 (8.0.1.21) crashes when opening or creating a project

I just downloaded the trial for Premiere Pro CC (2014), and the program keeps crashing every time I open or create a new project. I can idle at the "Startup Screen" but as soon as I open a project the program closes without warning. I've re-installed all Adobe products I have, re-installed the Microsoft Visual C++ Redistributable 2012 and 2013 to get new MSVCR110.dll files (which seems to be the file causing the crash) but nothing is helping. I've also looked in every thread I've found on this forum and a lot of people seem to be having the same problem, but no one had got any answers for how to solve the problem.
Anyone have a clue on what to do? According to others formatting the hard drives don't seem to solve the problem either.
Here's the crash log:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 8.0.1.21
Application Timestamp: 53c7b17f
Fault Module Name: MSVCR110.dll
Fault Module Version: 11.0.51106.1
Fault Module Timestamp: 5098826e
Exception Code: 40000015
Exception Offset: 00000000000740da
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1053
Additional Information 1: dac8
Additional Information 2: dac844fabf0ae09d193ac750f70263ad
Additional Information 3: 6e8b
Additional Information 4: 6e8b89b059d1639bd5ba176e9f652c56
I'm running a:
Intel i7-3770K, not overclocked
ATI Radeon 7850, not overclocked
16gb RAM
64-bit Windows 7 Professional with Service Pack 1

Me too with this one have it randomly when just opening the same project and begining to edit
had it happen about 4 times now.
Latest update
Microsoft Visual C++ Runtime Library
Program C:\Program Fi...
R6025
- pure virtual function call
[ok]
Adobe Premiere Pro CC 2014.1 has stopped working
roblem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 8.1.0.81
Application Timestamp: 5426694c
Fault Module Name: MSVCR110.dll
Fault Module Version: 11.0.51106.1
Fault Module Timestamp: 5098826e
Exception Code: 40000015
Exception Offset: 00000000000740da
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057
Additional Information 1: a22a
Additional Information 2: a22a26525c716a6a7fdf0a84944bf385
Additional Information 3: 9245
Additional Information 4: 9245cf38809b383bd6a86e3f052c9114
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Porblems importing Canon C300 footage into Premiere Pro CC 2014: only import 30 seconds

Hi! I'm having problems importing Canon C300 footage into Adobe Premiere Pro 2014. I'm taking the files directly from the media browser to I can only import the first 30 seconds of each clip.
Why can be that? Do I need a specific plugin?
Thaks for your help
Begoña
editor

Since you did not perform the copy process yourself, my thinking is that maybe something went wrong when it was done. Far too many people don't understand or follow the process that works.
My recommendation would be to get your hands on the cards and do it again, making sure to use only Explorer or Finder for the task.

Premiere Pro crashes every time I try to render how can I fix this?

Premiere Pro
I'm pretty worried about this. How can I fix this?
It is also crashing when I try to apply a motion blur to a small clip.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Adobe Premiere Pro CC 2014 compatible with Nvidia 970 GTX?

Good afternoon.
I'm an owner of a GIGABYTE Nvidia 660 GTX Ti OC 2GB. The card is detected by Adobe Premiere Pro CC 2014 (Even though,i think,it said that it's not listed or something but will work under my own risk..Is there a way to check if it's certified/supported via my own program and NOT the typical "This is the list of supported GPUs"?)
Anyways,i was thinking of buying one of the new 970GTX cards to game on better,but also to make full advantage of it's properties to do much more faster encoding/exporting (you know,create a H.264 MP4 720p@29,97FPS file) than my actual 660GTX card with Adobe Premiere Pro CC 2014.
The thing is,any owner of such card (GIGABYTE,MSI,doesn't matter) have tried to launch Adobe Premiere Pro CC 2014 and export stuff by using the GPU's full potential to make everything faster?.. Because i have this fear of "Getting the newest n greatest Nvidia card so far and in the end see/notice it'll not work with Premiere Pro CC 2014"
....Can somebody please help me with this big fear of mine,please?
Thanks in advance
DV

Locked... duplicate discussion... see GTX 970 and Premiere Pro

Porque Premiere Pro CC 2014 antes si reconocia archivos m2ts y ahora no los reconoce

Tengo Premiere Pro CC 2014 desde hace unos meses. El ultimo trabajo lo hice con el con archivos M2T. Llevo trabajando desde la version CS5 sin problemas con este tipo de archivos.
Por un cambio de disco duro de arranque tuve que formatear. Descargue de nuevo de Creative Cloud, Premiere Pro CC 2014 y mi sorpresa fue que al abrir el mismo archivo creado en
el mismo ordenador y con la misma version de Premiere, me dice "Formato de archivo de compresion no admitido". ¿Que puedo hacer para recuperar la posibilidad de seguir editando
este tipo de archivos en Premiere?

Thanks Kevin.
15 days ago undertake a project where work editing a m2t file with other files in Premiere Pro CC 2014. I finished my work and deliver. Use this 150 times m2t file in this project.
7 days ago change my boot disk by one solid state. I had to reformat my hard drive. Then install Premiere Pro CC 2014 and try to open the same project created with Premiere Pro CC 2014 15 days before and tells me that does not support the compression type of this file and no connection appears in red.
This is my problem: if admitted of 15 days before such m2t file after formatting and reinstalling, no longer supported? I have worked with Premiere Pro CS4 and then since I updated to 2014 CC.
I hope this explanation helps you to help me.

Premiere Pro CC 2014 not optimized for iMac 5K graphics card?

I have the new iMac 5k with the AMD Redeon R9 M295X 4 GB GDDR5 graphics card. In Premiere Pro CC 2014 (updated to the latest version), when I go to "project settings" and select "Mercury Playback Engine GPU Acceleration," I get a pop-up window that reads: "the selected renderer hardware has not been certified." Does this mean that Premiere Pro is not optimized for these video cards? If I still choose to select GPU acceleration, will I see any performance boost?
Thanks in advance for any responses.

It means Adobe has not tested the card.
If you can select the card you are OK.

Premiere pro cc 2014 update failed

Couldn't move a project from desktop to laptop. Laptop showed premiere pro cc 2014 up to date. But when I tried opening project it said it was created on a newer version. Chat support said I should downoad an update from a link they provided. Tried installing but says Update Failed. Tried cc cleaner too. No luck.

U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
or
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Multi Cam Flicker Issue - Premiere Pro CC 2014

Multi Cam Flicker Issue - Premiere Pro CC 2014 can any one help me pls

Hi,
This might help :
Go to File > Project Settings > General and change the Video Renderer to Mercury Playback Engine software only. Click OK and select Delete Previews.
Thanks,
Rameez

I am using 4K Footages for editing in Premiere pro CC 2014, but its getting crash in between at every 15 to 20 mins. Kindly suggest how can it be solved, does any plugins or settings needed to edit 4K footages? Also would like to mention that footages fra

I am using 4K Footages for editing in Premiere pro CC 2014, but its getting crash in between at every 15 to 20 mins. Kindly suggest how can it be solved, does any plugins or settings needed to edit 4K footages? Also would like to mention that footages frame rates are 29.97 and i have set timeline to 25 FPS is requirement by client. kindly revert. Thanks

Thanks Richarad ..It has solved the problem but still crashes some times .As the programme has the break (bumper)after every five minutes ,i hope it will not compress bumper time too after export.

Adobe Premiere Pro CC 2014 Crashing very often! Please Help!

Hello,
I am currently editing my first feature on Adobe Premiere Pro CC 2014 and it is currently up to date.
I am editing on a iMac 27in, late 2013 brand new computer.
Processor: 3.5 GHz Intel Core i7
Memory 32GB 1600 MHz DDR3
Graphics: NVIDIA GeForce GTX 780M 4096MB
System: OSX Yosemite V 10.10.1
The project is located on a 8TB G Drive
7200 RPM
High Performance ThunderBolt drive.
Details of the project:
I am currently working on a fine cut of 5K Red Footage that is being cut in the RAW.
I work at 1/2 quality settings and have no lag.
The timeline includes limited stacked video files and various mp3 audio files.
The Problem:
Lately, the program will randomly quit or freeze up 4-5 times during an 5-6 hour edit session.
Many times it is random, however, it seems to happen often if I accidentally click on the end of a clip on the timeline and it goes to switch into trimming mode.
Also, it will randomly go into the "pinwheel of death" out of nowhere followed by "Adobe CC is not responding."
My project file is just about 15MB now.
What is causing this reoccurring problem?
How can I make it happen less? I have scoured the forums and found similar articles but no helpful solutions.
I have recently turned auto save on to save every 2 minutes because there have been more than one occasion where I lost A LOT of work because of this issue.
I am about two weeks out from picture lock delivery and this issue is driving me crazy and loosing me a ton of time.
Please help or let me know if any more additional information can help solve the issue.
I have sent in well over 25 error reports already.
Thanks,
Thomas.

I think I may have found the solution...
I completely removed the Premiere Pro folder under User > Documents > Adobe and so far it seems to have solved the problem.
I of course backed up my projects and than deleted this folder. So far it seems it worked.
I'll know for sure in a day or two, but after constantly crashing, Premiere hasn't crashed for the last 4-5 hours of work.
Goran

Why does Premiere Pro CC 2014 renders incredibly slow?

Dear Premiere Pro experts
I created a movie with Adobe Premiere Pro CC 2014 and I have serious performance issues when it comes to export the movie.
The first 10% renders pretty fast and takes 1 hour. Then it takes for every additional 1% about 4 hours! (never rendered it to finish so far, 14% max so far)
Here are some facts that might help to isolate the problem:
Project:
Length: 24 minutes in total, splitted into several sequences (up to 4 minutes) and arranged on a "main-sequence"
Input: Cineform AVI files, 1080p, 59fps (I converted GoPro 3+ footage (3D!) using GoPro Studio to the Cineform format for further processing)
Desired Output: Same as input, preserving 3D (Render 3D Intermediate)
Effects used: Warp-Stabilizer (default settings) and Auto-Color (smoothing 1-2 sec) on almost every clip.
Hardware / Software:
i7-3770K @3.5 GHZ (Quadcore)
16 GB RAM
NVIDIA Geforce GTX 970 (also tried with a ATI Radeon R9 290X)
Windows 8.1
SSD for OS and programs, RAID 0 for media files and project, separate drive for rendering output.
Then I tried to render using AME using the same settings. The whole video rendered in about 14 hours what is acceptable in my case. There problem here is that the 3D gets lost, even if I selected "Render 3D Intermediate". The picture for the left eye is the same as the one for the right eye. This is not happening when I do a direct export. But the direct export get almost stuck at around 10%.
There is almost no difference in choosing Software-Rendering and GPU. Also, the GPU has almost no load. Premiere Pro uses the CPU for about 45% (total usage 65%) and takes up 5-9 GB of memory (total usage 65%). Disk usage at around 14b/s.
I think there are two problems. One is that AME renders differently (no 3D) and the other is that the direct export takes way too long.
Can someone help me with any of these problems?
Thank you,
Martin

I did some additional research and found out, that the slow rendering happens with this combination:
- Auto-Color using Temporal Smoothing
- Render 3D Intermediate
Without rendering the 3D intermediate, Temporal Smoothing is not a problem. And without temporal smoothing, Rendering 3D Intermediate is not a problem.
Might this be a problem in the codec or in Premiere?

Flicker footage in Premiere Pro CC 2014.2. Tested on different computers. When waiting for fixes this bug?

Similar Messages

Maybe you are looking for