FLV is different length depending on player

Hi all!
I'm not very experienced with Flash, and I may not know the
proper terms so...please bear with me! I really need some help
figuring this out.
I have an FLV file that I'm streaming from my website (along
with others), but when it streams it doesn't play the whole video.
Here's what I've figured out: when I view it in a player like VLC
or Media Player Classic the whole video appears and plays (3:56),
but when I view it in an actual FLV player it only recognizes and
plays the video as being 3:35.
What...the heck is going on?
Here's
a link to the video if you'd like to download and look at it.
Incidentally, I did not convert this video.
Could someone please explain to me what's going on?
Thanks!

.CR2 is Canon's propitiatory raw file format. A raw file contains the raw information from your camera's sensor, unlike other formats such as .JPG
Since, I gather, you are using the JPEG format, you won't see any benefit from using the ProPhoto colorspace (the camera is already saving as either sRGB or Adobe RGB, and has compressed information).
Pictured in my previous post is Adobe Camera Raw, which is Photoshop's Raw file editor. It's editing functions are nearly the same as Lightroom.
In Lightroom these are the two places you need to change it:
You're very welcome!
Benjamin

Similar Messages

RTorrent: move downloads to different directories depending on tracker

Hi!
I would like rTorrent to move completed downloads to different directories depending on the trackers in the torrent. An ideal setup for me would be something like this:
torrents/completed/tracker_x
torrents/completed/tracker_y
torrents/completed/tracker_z
torrents/completed/unknown_trackers
torrents/incomplete
torrents/torrent_files
torrents/session_data
Any hints/links/etc for me? I think i can make something work if rTorrent could pass the .torrent file path and downloading directory to a bash script

very lazily copied out my .rtorrentrc
32 schedule = watch_directory_1,10,10,"load_start=/home/share/media/torrents/foo/*.torrent,d.set_custom1=/home /share/media/video/foo"
33 schedule = watch_directory_2,10,10,"load_start=/home/share/media/torrents/bar/*.torrent,d.set_custom1=/home/s hare/media/video/bar"
39 on_finished = move_complete,"d.set_directory=$d.get_custom1= ;execute=mv,-u,$d.get_base_path=,$d.get_custom1="
there's also this, but i think it doesn't actually move the files; it makes symlinks.
http://code.google.com/p/pyroscope/wiki … Completion
Last edited by tladuke (2010-12-12 23:31:40)

Is there a way to have different length needles on a gauge?

I am trying to simulate a clock face on a gauge using different length needles. I have tried extensively to change one of the needles, but it doesn't work. When I use the control editor to change the length of 1 needle, it changes the length of both, even when I right click and choose "independent sizes." Am I missing something? I have been trying to find the answer to this on the discussion forum for awhile now. I am using LabVIEW 6.0.2. Thanks,
~Matt
maat
LV2014

Hi Matt,
It is an Interesting Problem. Using Control Editor Can be tricky and Frustrating.
Some times I use a trick for many such problems. What I did is this - Created two Gauges with Identical Scales. One is Smaller than the Other in Size. So we have a Large Gauge with Large Needle and a small one with Small Needle.
Now I color My small Gauge - Border, Face and Center Pivot - Transparent. I leave the needle as is.
Third I Put the Smaller Gauge on top of the Larger Gauge. Make Sure the Large Gauge is Moved Backwards and the smaller Gauge (Transparent) is in Front.
Now You actually are Looking at a Gauge With two Sized Needles!! Purists Might say, hey thats not fair. But I had the clock face ready in 5 Minutes Flat!!
Anyway, I am Attachin
g a Small Illustration vi in ver 6.0 for you to see. Oh Yeah!! You need to put some engine under the hood though!!
Good Luck!!
Good Luck!
Mache
Attachments:
Clock_Face.vi ‏26 KB

Premiere Pro CC and Encoder CC ( 7.1.0 ) produce different outputs dependant on Queue or Export meth

I have used a standard workflow for many months but recently something has changed. If I create a simple 720x576 sequence with video and then send this to Media encoder I get different results dependant on if I queue or export the sequence. If I export directly from the application then the resulting file is perfect ( MPEG2/QT ) , however if I queue the file and then export the resulting file contains small black vertical bands at either side of the image an the resulting image looks squashed.
Testing the same workflow in CS6 does not have the issue.
Has something changed with the latest 7.1.0 release ???
Can anyone make a simple test and let me know ??
If you simply queue to the Media encoder and view the window you can see the added bands ??
I am using MAC OSX 10.7.5 as a platform
Thanks

Here you can download the trial they are all the first build (7.0)
http://prodesigntools.com/adobe-cc-direct-download-links.html
Updates can be found here:
http://www.adobe.com/support/downloads/product.jsp?product=98&platform =Windows
http://www.adobe.com/support/downloads/product.jsp?product=98&platform =Macintosh
Take from http://forums.adobe.com/thread/1357792?tstart=0
Also, take care to track down Adobe Media Encoder 7.0 — the installers above don't downgrade AME, and you'll have issues queing projects if you're sending it from Premiere 7.0 to AME 7.2.

Show report in different currency depending on user parameter

hi all,
i'm trying to show my report in different currency, depending on users given parameter.
i hold my account balance in USD based. User should select one parameter, in which currency they want to see their account balance. (e.g. EURO, GBP ...) and depending on their selection, i want to convert USD based info into chosen currency, by fetching field from currency table and making some calculation.
also i want to include in report currency($, Â£ ...) accordingly ().
how can i achieve this, has somebody any suggestion to me?
thanks in advance.
bogi.

hi,
i think i need to explain my problem more detailed. anyone who has suggestion, please help me.
i have 3 tables account, times and currency.
- times table has time_key, date, day_of_week fields.
- account table has - account_balance and time_key_FK fields.
- currency table has currency_type, amount, time_key_FK fields.
1. i have function decode(:Currency,'USD',account_balance,'EURO',--here i want to replace my calculation CALC1---)
CALC1- this calculation need to some calculation like this: account_balance * (fetched field from this sql)(select amount from currency, account where currency.currency_type='EURO' and account.time_key_FK=currency.time_key_FK)
i tried to do this, but discoverer plus doesn't let me make condition and calc. i'm very confused.
2. after i achieve this query, somehow i want to display on worksheet on which currency is it based. can i get parameter value, and show this value as in column heading?
tnx!!!

Aperture performs adjustments in a different order depending on file type

Aperture performs Adjustments in a different order depending on file type.
Here's an example:
Starting with two copies of an image, one in RAW format (Canon CRW from a D60), the other in TIFF (opened the .crw file in Preview and exported an 8bit tiff file).
{The test image is a photo of my copy of Aperture on the floor of my studio (which, for reference, is a few points of Cyan off of a neutral grey).}
The original Image.
http://members.arstechnica.com/x/adrien/testRAW_originalImage.jpg
Adjustments
http://members.arstechnica.com/x/adrien/adjustments.jpg
The RAW file adjusted
http://members.arstechnica.com/x/adrien/testRAW_adjusted.jpg
The TIFF files adjusted
http://members.arstechnica.com/x/adrien/testTIFF_adjusted.jpg
Import both of these files (testRAW.crw & testTIFF.tiff) into Aperture.
Make adjustments to the RAW and TIFF images:
- Exposure: Saturation -> 0 (lowest possible value).
- White Balance: Temp -> 3500K (from 5000K).
It doesn't matter what order you perform these operations in.
The RAW file is now a neutral greyscale image. With the Saturation set to 0, the White Balance makes no major difference in the image, it stays grey.
The TIFF file, however, is now a blue tinted greyscale image - much like a sepia-tone effect. Moving the White Balance slider changes the color of the image.
It appears that Aperture is performing the Saturation and WB operations in a different order: for the RAW file it first performs the WB, then the saturation; while in the TIFF file it performs the saturation first, then the WB.
The result is the same for a JPEG image.
The RAW behavior is the 'expected' behavior in photography - White Balance should happen 'before' the Saturation setting.
I've filed the bug with Apple (number 4394125 at bugreport.apple.com). hopefully they'll fix this.
Cross posted from this discussion at the MacAch on ArsTechnica forums:
http://episteme.arstechnica.com/groupee/forums/a/tpc/f/8300945231/m/893007866731 /r/832001796731#832001796731

Well, there are different ways of achieving this.
Solution 1:
You can create a new output type which will be triggered and call a same driver program and the new smart form. I am sure you can customize as to what Purchasing document type will trigger which output type. Get in touch with someone in the function team to get this configured.
Solution 2:
No Customizing, let the configuration be the same, but in the driver program change the value of "TNAPR-FONAM" immediately after the form entry_neu to the new form name based on the Purchasing document type.

How to create a front panel display that lights up with different colours depending on its input signal?

I am doing a project where I have this array which has different voltage outputs for each grid. How do I create a front panel object that lights up with different colours depending on the voltage input or is there already such a pre-built function?
In addition, I wish to display these in an array on screen. Is there any pre-built function for this?

Repulse wrote:
I am doing a project where I have this array which has different voltage outputs for each grid. How do I create a front panel object that lights up with different colours depending on the voltage input or is there already such a pre-built function?
The simplest way would be an intensity graph. It gives you a 2D grid where each grid point is colored according to the value of a 2D array. The Z axis color ramp determines the color.
My second choice would be an array of colorboxes. (They could even be made to look like LEDs (see image, if course you can leave them square too), All you need is a scaling function thap maps voltages into a color ramp lookup table with an 8bit index)
(Using booleans and color property nodes is relatively clumsy. Booleans are meant for two states because the value is boolean. Since array elements can only differ in value, and not in properties, it will not even work. Color boxes have a color data type which is much more appropriate for this case)
LabVIEW Champion . Do more with less code and in less time .

Show channels with own time channel and different length in one 3D graph

Hi,
How can i show channels with own time channel and different length in one 3D graph?
My consideration looks like this, but i didn't found a solution with acceptable performance. ( i have many channels to merge and many data in them)
i have 4 Channels 2 with values and 2 with time.
Example:
Pair 1:
1 - 3
2 - 4
3 - 5
4 - 8
5 - 9
Pair 2:
1.5 - 6
2.3 - 7
4.5 - 8
I want than this result:
1 - 3
1.5 - null
2 - 4
2.3 - null
3 - 5
4 - 8
4.5 - null
5 - 9
And
1 - null
1.5 - 6
2 - null
2.3 - 7
3 - null
4 - null
4.5 - 8
5 - null
thanks a lot
by
Stefan

Hi StefanF,
You need to first create the timebase that you want (in this case with a 0.5 increment) using the "Generate Numeric Channel" ANALYSIS function, then use the resulting time channel in the "Linear Mapping" ANALYSIS function for each of the original channel pairs.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

IView that displays different things depending on event

Hi list,
I need to create an iView that will be receiving different events from other iViews. This receiving iView will display different things depending on the event (eg. image maps, data sheet, etc). How should I implement this iView? Should this iView be multi-component and then the events triggers the correct component? Or should this iView be multi JSP pages with one component handling the event and calling the correct JSP page? Or are there any other suggestions/examples out there?
The image map is not simple either. It has several hotspots on one image map.
Thanks in Advance,
Jovanka

Hi list,
I need to create an iView that will be receiving different events from other iViews. This receiving iView will display different things depending on the event (eg. image maps, data sheet, etc). How should I implement this iView? Should this iView be multi-component and then the events triggers the correct component? Or should this iView be multi JSP pages with one component handling the event and calling the correct JSP page? Or are there any other suggestions/examples out there?
The image map is not simple either. It has several hotspots on one image map.
Thanks in Advance,
Jovanka

Read two lvm files with different length

I'm trying to read to same graph two different measurements with same starting point, starting point is OK.
But when the shorter file is coming to the end the VI stops with following message:
"Possible reason(s):
LabVIEW: End of file encountered.
=========================
NI-488: Invalid argument or arguments to function call."
How can I come over this and get both measurements into same graph in their full length with same starting point?
PS I have attached the VI file, a short and a long measurement file. Changed the file extension from LVM to TXT
Attachments:
Read_duo.vi ‏128 KB
SE1100_ny_1.txt ‏249 KB
SE1100_ref_1.txt ‏468 KB

Hi,
Apprently your LabVIEW is set with the option "enable automatic error handling", you can change this in tools >> options block diagram untick the option.
Doing this will only get ride of the dialog when the error occurs but not get read of the error.
So you are reading your files chunk by chunk in your while loop, so at some point you will get to the end of your files, when you do the VI you are using return an error 4 "end of file reached", from here you have different possibilities, if you want to be able to read files that have different length, here is a quick way to ignore the "end of file" error on both files independantly.
Hope this helps
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Choosing different versions of Flash Player in Flash Catalyst

Greetings everyone,
Is it possible to choose different version of flash player when I publish my website using flash catalyst? Currently it is askinf for flash player 10.2 in order to play. I want to lower down the version of flash player required in order to let more users view my project.
Thanks!
James

quote:
Originally posted by:
Darren McNally - Adobe
Hi kidkwattro,
There is an extension for Firefox called ‘Flash
Switcher’.
This extension allows you to switch from one version of Flash
player to another. This is not an Adobe product, but it had
received some good reviews on the web.
This is an amazingly useful tool as a developer working a
selection of sites which are all catered towards a different target
age range (older people seem to have older versions installed).

I want to snooze an event for a different length of time than the default. How do I select a different snooze length?

I just upgraded to Mountain Lion and I can't see how to snooze an event alert for other than the preset 15 minutes. How do I snooze events and other alerts for different lengths of time than the default? Sometimes I want to snooze an event until the start time or maybe for a whole day.

SnoozeMaster is now avaiable from the Mac App Store, for MacOS X 10.8 and up.
https://itunes.apple.com/us/app/snoozemaster/id614955483?mt=12
It addresses this exact issue. You'll be able to configure different pre-set snooze times, enter custom snooze times when an alarm triggers, etc. It's what snoozing should've been from the get go.
More information:
http://on-core.com/snoozemaster/

Same clip, different lengths in CS3 and CS4?

I'm trying to fix a problem I'm having importing my CS3 project into CS4 and I noticed that the clip lengths in the properties windows do not match for my files. For example, if I open my clip in CS3 (where it was originally edited) it shows it this:
File Path: F:TapesTape 24Scene 018 - Ally & Paul Coffee (9).m2t
Type: MPEG Movie
File Size: 365.4 MB
Image Size: 1440 x 1080
Pixel Depth: 1440
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;01;54;14
Average Data Rate: 3.2 MB / second
Pixel Aspect Ratio: 1.333
But in CS4 the properties show up as this:
File Path: F:TapesTape 24Scene 018 - Ally & Paul Coffee (9).m2t
Type: MPEG Movie
File Size: 365.4 MB
Image Size: 1440 x 1080
Pixel Depth: 32
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;01;53;08
Average Data Rate: 3.2 MB / second
Pixel Aspect Ratio: 1.3333
What would cause this discrepancy? I shot at 30f on a Canon XH-A1. My project settings in CS4 are HDV 1080p30. Do I have the wrong settings? How could the same clip be of two different lengths. I'm so confused!
Please respond only if you have a suggestion. I am not looking for comments about how I shouldn't switch programs midstream. I would like some honest help, however!
Thanks!

I've got a couple suggestions.
First would be to see if its a problem with the import or a just a difference in how CS3 and CS4 reads the files. If you import one of .m2t files directly into CS4 and not through importing the project, does it give you the same info as you listed above? (I'm assuming the file info above was derived from importing the project and then looking at the file's info.) If it is correct when independently brought into premiere, then the problem lies with importing a CS3 project and I would suggest trying to unlink then link your media. If there is no difference, then it's something else.
Second suggestion is to export an EDL out of CS3. Then, instead of importing your CS3 project into CS4, import the EDL and see if this resolves your edit points.
One note I've noticed with the EDL's in premiere, they don't import well when generated in framecount mode, but work fine in timecode mode (in CS3 this is just what your timeline time indicator mode is set at, right click the time indicator and set it to Timecode. in CS4 this doesn't work and you have to set the Display Format to Timecode under your Project Settings.)
Good luck.

Creating slides of different lengths

I want to use Keynote to create training videos. I am working on a test project. I created different video projects in IMovie for the different slides. Then I added each clip to its own slide. The clips are different lengths. I want the final project to run beginning to end automatically. How do I do this when each slide is a different length?

I believe your clips should start playing automatically (if not, check the Quicktime tab of the Inspector and make sure "Start movie on click" is turned off). So the only thing you need to do is set it to automatically transition to the next slide without having to click. In the Inspector, on the Transitions tab, make sure the Effect is set to None, then the Start Transition to Automatically, and set the number of seconds to equal the length of the clip on that slide. I hope that works for you.

Layout: multiple rows of different lengths

Ok for one im kinda new to java so all this swing stuff is still in a limited understanding for me. I am doing quite well with it, but i am trying to have a set of buttons, 50 in fact. There are like 10 rows. Now the problem is that the first 3 rows are different lengths such as:
x is a button
x x x x x
x x x x x x x
x x x x
x x x x x x x x x
x x x x x x x x x
x x x x x x x x x
x x x x x x x x x
x x x x x x x x x
x x x x x x x x x
sorry about the horrible illustration, what im trying to say is that the first row has lets say 5 buttons, then the second row has 6 then the 3rd has 4 and then the remaining ones have 5. How would i come about this. I have tried using multiple jpanels like in the code below, but only the last one is being displayed, how would i do this?
If you need more info post that you need it.
Thanks
CODE:
JPanel pane1 = new JPanel(new GridLayout(0, 1));
pane1.setBorder(BorderFactory.createEmptyBorder(30, 30, 10, 30));
          JPanel pane2 = new JPanel(new GridLayout(0, 5));
pane2.setBorder(BorderFactory.createEmptyBorder(30, 30, 10, 30));
          JPanel pane3 = new JPanel(new GridLayout(0, 6));
pane3.setBorder(BorderFactory.createEmptyBorder(30, 30, 10, 30));
          JPanel pane4 = new JPanel(new GridLayout(0, 4));
pane4.setBorder(BorderFactory.createEmptyBorder(30, 30, 10, 30));
          JPanel pane5 = new JPanel(new GridLayout(0, 5));
pane5.setBorder(BorderFactory.createEmptyBorder(30, 30, 10, 30));
          JTextArea displayBox = new JTextArea("Hello");
          pane1.add(displayBox);
          JButton[] buttons = new JButton[50];
          for (int x=0; x < 50; x++)
               buttons[x] = new JButton(normKeys[x]);
               if (x <= 4)
                    pane2.add(buttons[x]);
               else if (x <= 10)
                    pane3.add(buttons[x]);
               else if (x <= 14)
                    pane4.add(buttons[x]);
               else
                    pane5.add(buttons[x]);
          frame.getContentPane().add(pane1, BorderLayout.CENTER);
          frame.getContentPane().add(pane2, BorderLayout.CENTER);
          frame.getContentPane().add(pane3, BorderLayout.CENTER);
          frame.getContentPane().add(pane4, BorderLayout.CENTER);
          frame.getContentPane().add(pane5, BorderLayout.CENTER);
          frame.pack();
          frame.setVisible(true);

The GridBagLayout class is a flexible layout manager that aligns components vertically and horizontally, without requiring that the components be of the same size. Each GridBagLayout object maintains a dynamic, rectangular grid of cells, with each component occupying one or more cells, called its display area.

FLV is different length depending on player

Similar Messages

Maybe you are looking for