Flv videos not playing on html files - UNC/Mapped Drives

Hi,
We've discovered an issue with Dreamweaver CS3 recently (running on Windows 7 Pro, 32bit) in our school, where embedded flv video files wont run when the file's UNC path appears in the address bar, but will if this is changed to the local drive letter, in our case N. This obviously makes it a little difficult for teachers to mark students' work.
I found a similar issue in another thread:
http://forums.adobe.com/thread/688483
which had not been answered. Are there any known solutions for this please? I have spent a while browsing, but have so far not come back with much. I've tried enabling and disabling 'Remove run from start menu' which was suggested, but this didn't make any difference.
Thank you
Regards
Savos Aren

Nathan,
Your welcome, if that is the case, then can you try and insert the MultiSlide Video, you can insert the streaming video URL.
You can add the server to you computer as network Drive and then browser to that location, once you do that, the options to add the Video as Streaming can be chose and your Vidoe would remain insync with main playbar, users can play and pause content that way.
See if this can be implemented at your end.
Thanks,
Anjaneai

Similar Messages

  • FLV embedded in a SWF file, does not play in HTML file.

    Hi,
    I embedded a FLV file into flash movie clip, which on publish plays well on SWF file, but when the same is embedded in HTML, it does not play.
    What is it i'm missing ..
    Kindly help.
    Regards
    Shashi

    First, clarify this... are you embedding the .flv into the time line, as in:
    The .FLV file is imported on the  timeline of a movie clip.
    I embedded the .flv file,
    If you are in fact embedding the video, then there is no external video file... it's embedded into the timeline.
    If you are using the FLVPlayback component and an external vid file to display the video and the .swf when testing plays the video just fine but not on the HTML Web page:
    SWF plays external video file, as soon as I embed SWF in HTML, it no longer playes the external video file.
    then it's most likely a pathing problem.
    If you are placing the .swf on a Web page and the .swf and/or the .flv file are not both in the same folder as the Web page.... then the .swf should NOT work when you test it directly! That's because it should be pathed to play from the Web page and not the location of the .swf.
    For your review:
    Almost always when it works on the local machine and not the server, it's a pathing problem.
    You can put your Flash related files in whatever folders you want, they do NOT have to be in the root, they do NOT all have to be in the same folder. But if you have a problem and if sticking them all in the root folder works, then you know that the issue was a pathing problem.
    Just remember that paths used in the .swf become relative to the Web page on which the .swf is placed, NOT it’s physical location.  So for example, if your .swf is in the flash/data folder and you use that .swf on a Web page in the root folder, you are in effect, removing that .swf from flash/data and putting it in root. So if the .swf is loading any related files (xml, images, video, etc), the path used inside the .swf to load the .xml file has to be relative to it's new location in root and then back down into flash/data. This is true even though when testing the .swf by itself, it can be inside flash/data and work just fine, since relative to it's location, the path is just fine, they are in the same folder. But if that same path is used when the .swf is placed on a page two folder levels up, the relative path has changed, the old "same folder" path will not work.
    In fact if you are placing the .swf on a web page in a different folder than the .swf is stored in, and that .swf calls external assets, then direct clicking and opening of the .swf in it’s folder should NOT work! That’s because the paths to the external assets should be relative to the Web page and not the physical location of the .swf.
    So just be sure that you use addresses relative to the final Web page locations (not physical file locations) and you can put the Flash related files in what ever folders you want.
    Best wishes,
    Eye for Video
    www.cidigitalmedia.com
    Best of luck,
    Adninjastrator

  • Flv video not playing in AIR application

    Hi everybody,
    i'm building a tutorial with flash catalyst and since the 20 states limit i've split it up in different swf files that I import and show in different states.
    One of these swf (which i built with Catalyst as well) is supposed to play a flv video, and it actually plays it if i run it alone.
    The problem comes when i build the overall tutorial: it works perfectly with the "run project" command in Catalyst and with the run-local version but the video won't play if i try the AIR application.
    Does anyone have any suggestion?
    NB: the "asset" directory created with the AIR application installer does contain the flv file (i didn't have to put it there manually)
    Thanks in advance for your help,
    Giuseppe

    Hi Giuseppe,
    what I do is:
    1. create a file using Captivate
    2. i place a .flv video in this file
    3. save the file as .swf
    4. then i go to dreamweaver and put the swf on a html page.
    Now:
    when viewed in a browser, everything runs fine.
    when i pack this page into an air application (in dreamweaver) the video does not appear,
    instead I get this "Connection Error"
    I do not know a console or log file.
    However, I learned that there is a .xml file located in the same AIR folder that you publish in.
    In this .xml file there is a setting :transparency. in order to playt a .flv file this must not be be "transparent"!
    (i read this somewhere in the net)
    hope that helps
    I will talk to a professional programmer, if I have any news, i will let you know
    Claus

  • FLV videos not playing correctly in Captivate 6

    I am running into an issue where my FLV video is not playing correctly when my Captivate project is exported out and saved to the web. The FLV video is about 20 mins long (~100 MB) and it is being streamed from Kaltura. The FLV video is inputted into the Captivate project as a multi-slide synchronized video across 27 slides. The slides themselves are imported from Powerpoint. The problem that we are running into is that the Captivate project and the FLV video play correctly when viewed with decent bandwidth, but they do not appear to play correctly for users with slower bandwidth. However, if a user views the videos independently of Captivate, they can view the videos correctly, even at slower bandwidth. I have tried hosting the Captivate files on several different webservers, including an LMS. But the issue continues and I'm searching for any type of answers that might help.
    Thanks for reading and any help you can provide would be greatly appreciated.
    Nathan

    Nathan,
    Your welcome, if that is the case, then can you try and insert the MultiSlide Video, you can insert the streaming video URL.
    You can add the server to you computer as network Drive and then browser to that location, once you do that, the options to add the Video as Streaming can be chose and your Vidoe would remain insync with main playbar, users can play and pause content that way.
    See if this can be implemented at your end.
    Thanks,
    Anjaneai

  • Flash Video not playing in Published file

    I published the files. I then click the "view ouput" button.
    I am able to see the video playing locally. However, when I copy
    all the contents in the publish folder (.htm, .swf, .flv, etc.) to
    my web server, the flash video does not play. The rest of the .swf
    animation plays, just no video.
    I do see a security message
    I did choose progressive download and selected Flash version
    as Flash Player 8.

    Hi all
    Take a look at what fellow Adobe Community Expert Paul
    Dewhurst offers up.
    Click
    here to visit Paul's site
    Cheers... Rick

  • .flv VIDEOS not playing smoothly

    A heavy video-generated Captivate project has been created in Cap 4:
    * 18 slides all up, with the total size of .flv videos coming to 90.7MB
    * Using Captivate, as looking for interactivity -- there is also a menu, so users can jump to whichever section they'd like to watch/use
    When accessing the completed project online:
    1) The loader quickly goes up to 100%
    2) Shows the preloader image I have inserted
    3) User clicks play, and the first slide with video plays...
    The first video either freezes / move quickly along the timeline. You are also unable to jump to other sections shown in the menu. While I am not too worried about this, my priority is for comfortable viewing for the first video. I am assuming that the first video freezes, etc because the whole project has yet to load completely. How can one work towards this solution? I have tested the loading time, changing it from 10%, 20%, towards 100% but the video is still freezing at times / moving quickly along the timeline.

    Thanks for your PM - I just checked your project and it runs 100% fine and smooth for me.
    I checked it on two different PC's
    1. Vista 64-bit, IE 7.0, Flash player 10, 10mbit/10mbit internet connection.
    2. Win XP Pro, IE 7.0, Flash player 10, corporate LAN
    This leads me to the conclusion that the issue is the speed of your internet connection. The first video is around 80 seconds and is 13.5 Mb. That is very big when you consider the length and especially the dimension of the video you are using.
    If you dont already have FP10 then try and upgrade to see if that helps. It's much better at handling videos etc. than the older versions of Flash players.
    Secondly you need to recode your videos. You will be able to get the first video down from 13.5 to perhaps 4-6 mb, with a noticable quality loss. If you have Flash you can use the Adobe Media Encoder to do the recoding.
    /Michael
    Click here to visit the www.captivate4.com blog

  • Video not play on phone

    Mp3 play but video not play my phone
    my Email add. [email protected]
    Moderator's note: E-mail address was removed. Please don't publish your personal contact information on a public forum.

    sharankumar1, which phone model do you use? Nokia phones are a bit picky about the file content, the codec. If you tell me your model, I tell you the available codecs. In the meantime, you have to convert your videos …

  • I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

    . I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

    That may be a problem with the VLC plugin. VLC has never worked for me properly on the occasions that I've tried it on Windows and Linux, so I have stop using it. There are usually other plugins or media players available that work better.
    What kind of media files are that?
    For WMP files you can install the new Windows Media Player plugin you can also try RealPlayer and QuickTime if it is about media that those programs can handle to see if that works better.
    * https://support.mozilla.com/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
    * http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
    * http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download

  • Video not played using JMF while tramitting stream over RTP

    video not played using JMF while tramitting stream over RTP
    I am using code to tranmit video using RTP using JMF and i am able to successfully get the video on client side
    Code to send the video over rtp
    http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVTransmit2.java
    code to recieve video over rtp
    http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVReceive.html#source
    My problem is i am not able to play video in AVTransmit2.java.
    If i create a player using datasouce, eigther i get player already occupied or a black screen.
    please help me running the video on Transmit side as well.
    NOTE: i am using web cam for video source
    Edited by: qasitouch on Dec 23, 2009 5:55 AM

    I am not getting any error on consol, rather video is not displayed on media screen but black rectangle.
    On Transmitter
         // Try to create a processor to handle the input media locator
         processor = Manager.createProcessor(ds);
    createPlayer(Manager.createCloneableDataSource(ds)); // here i am craeting a player to show the video on transmitter end aswell.
    Player code:
         private void createPlayer(DataSource ds) {
              try {
                   Player player;
                   if(processor!=null)
                        System.out.println("processor: " + processor);
                        player = processor;
                   }else{
                        System.out.println("null is processor");
                   player = Manager.createRealizedPlayer(ds);
                   Component video = player.getVisualComponent();
                   JFrame mediaFrame = new JFrame("Camera Screen");
                   mediaFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                   mediaFrame.add(video);
                   mediaFrame.setSize(300, 300);
                   mediaFrame.setVisible(true);
                   player.realize();
                   player.start();
                   player.prefetch();
              } catch (NoPlayerException e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
              } catch (CannotRealizeException e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
              } catch (NotRealizedError e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
              } catch (IOException e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
              } catch (Exception e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
    I am not getting any error and not running on the same side. My problem is showing video on Tranmitter end.
    Using above code i can create player and a black screen is showing, i am ubable to find, why video is not played in screen.

  • When using ipad4, why do videos not play on Google?  Audio works fine

    WWhen using ipad,why do videos not play on Google? Audio still plays. I have reset the Google app and it will be ok for short time but then reverts back to not playing videos.

    Hi Vernon70,
    Welcome to the Apple Support Communities!
    I understand that an application you downloaded from the App Store, Google, is not functioning as you would expect. In this situation, I would recommend following the troubleshooting steps outlined in the attached article. 
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Best regards,
    Joe

  • Embedded MP4 videos not playing in iOS Safari

    Hi everyone,
    I'm having a problem with embedded MP4 videos (e.g. YouTube videos) not playing correctly in Safari. When I try to play one, I get one of two problems:
    1. On my (first gen) iPad, Safari usually crashes.
    2. On my iPhone 4, videos will load but only play audio, not video, though when I tap on the screen the "play" and "pause" symbols appear.
    Has anyone else run into this problem? Or know how to fix it?
    Thanks,
    Mike

    Ok, I fixed it. Go to some embedded Flash video, click to run and then right click to get Global Settings for Flash. Go into Storage and make sure you aren't blocking any data from being stored on your computer. At the very least choose the "ask me" setting. (For good measure I also went into Advanced and clicked to Delete All Data associated with Flash. But when I restored Block for data storage the videos stopped working, so that seems to be the answer.) I'd be interested to hear if this works for others.

  • Why are my videos not playing the right way up

    Why are my videos not playing the right way up

    I took four video clips while on a trip this week.  Two are oriented the right way (playing wide on the device and imported correctly).  The other two are Tall and not oriented right.  Orientation is 90 degrees to the right.  I don't know why this is happening on occasions.  Even some pictures I took did the same **** thing.  It's weird.  And I can't figure it out.  The camera is held the way I want the pictures and videos to be recorded and played but something internal is turning these videos and pictures 90 degrees clockwise.

  • EA Could Not Find The .html File Associated With...

    After naming folder names, I now get the "EA could not find the .html file associated with..." message when I open the .edge file. When I open the .an file, I have all elements and the timeline are gone! How can I restore it? Surely, it is just a question of changing a path, or? Please help. Thanks!

    From the File > Open menu, browse to the that same folder (the newly renamed one), and select the .html file.
    Darrell

  • U310 Touch - Videos not playing after 8.1 Update

    Hello,
    I have updated from Windows 8 to 8.1 and updated all my drivers on my U310 Touch.
    However, I seem to have a problem with web based videos not playing videos on the internet.
    This seems to happen on every kind of web browser, including IE, Firefox, Chrome, and even Steam.
    If anybody knows how to fix this problem, that'll be great.
    Thanks in advance.

    Since the upgrade to 8.1.1 my iPhone 6 stopped recognising the fingers I had stored. I've deleted and addrd them again (which went as norma) and it still has problems recognising them. Seems very intermittent now, whereas before this upgrade was very reliable.
    I've  reverted to a pin code :-(

  • Albums can not play because original files can not be found

    Suddenly about half of my albums in iTunes will not play.  Error message says tunes will not play because original files can not be found.  The other albums still play fine.

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool have moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you might be able to reconnect iTunes to them using my FindTracks script.
    tt2

Maybe you are looking for