FM For Check File is Already Open in CLIENT.

Hi Experts,
I have a program that,
User gives a file name (file has some rows),
Program runs with data that included in file,
and when program finishes, write something to file which user given before using (WS_DOWNLOAD)
But if user dont close the file when program is running, program cant write something to given file.
So, i have to check file is already open before program runs.
Are there any FM to check if File Already Open on <b>Client</b> (Not Application Server so cant use open dataset).
thanks
ibrahim

Hi,
Please try this FM FILE_OPEN.
Regards,
Ferry Lianto

Similar Messages

  • This file is already open by another user or another application-

    I am using InDesign CS4 on Mac OS 10.6.4, and sporadically get an error message reading "This file is already open by another user or another application. This file may be stored on a network server and cannot be opened until the other user closes it." This happens when I try to open a saved .indd file. The files are all on my hard drive, I created them, and nobody else has access to them.
    So far I've lost a handful of files' worth of work, as I cannot open the file in InDesign as an original or a copy, nor can I copy the file in the Finder (I get "unknown error: -22"), nor can I copy or move it using Terminal, nor can I zip it up. Time Machine doesn't recognize the file, and Apple Support couldn't help.
    I tried calling Adobe Support, but after telling me it was $40 for the answer the phone tech sent me back to the website instead of letting me pay!
    How do I fix this? I am losing hours of client work every time this happens, and only if I have a pdf version of the file can I recreate the work.
    Many thanks in advance.

    The last time it happened I restarted, cleared both the PRAM and NVRAM, and ran both Disk Utility and Disk Warrior. Nothing fixed it. I changed the permissions a number of times and that did not fix it.
    It's important to note that it doesn't happen to every file I save from InDesign; if it did I would have re-installed CS3 and dealt with that, because this issue never happened before I upgraded. So there's also no way to know if a possible fix is working or not.
    Also, there were no placed images or other artwork in the file this happened to most recently.
    I've checked my FontCase prefs, and if it's not running it's disabled, so that's out. I have some fonts that had been converted from Windows PostScript to TrueType, so I've disabled those.
    As I mentioned in the original post, I am not on a network beyond my home network, which consists of two computers and two routers. The file is on my computer's hard drive, and I am the only person accessing it. While I do use Dropbox, this file is not in that directory.

  • Users open shared files but they get an error that file is already open when actually its not

    we have a windows 2012 r2 environment with a hyper-v cluster with 4 virtual servers (2012r2) that are located on an hp storage.
    users in the office work on windows 7 pc's and sometimes (more than once per day) when they try to open word or excel files from a shared folder they get a message that the file is already open so it opens in read only mode and they cannot save it. we are
    pretty sure and tested that that folder is not open from any other user, because some users tried to open files randomly back from 2012 and they got the same errors again. 
    i cannot reproduce when i want the problem. i may try reopening files for an hour without having problems.
    i tried also to write down the hours that the users may have mostly the problem but i couldnt figure a specific time on the day that the problem occurs.its random.
    i want to also notice that we have symantec backup exec 2014 and taking backup on tapes and on deduplication folder with the advanced open file option set to "let VSS to select automatically the provider"
    the file server does not record any events in system or dfs replication tab. they only events we got once per 1 or 2 days are in the application tab and its exactly this "the volume recovery was not optimized because an error was encountered:
    the file move failed 0x89000016) event id 257,defrag"
    i hope i gave u an accurate description of my problems. i really have to solve this.
    kostask

    Hi Kostak, 
    Have you tried to use Process Explorer?
    More info: https://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
    Simple usage: Part 1: Using SysInternals Process Explorer to solve issues
    when trying to clean up files and folders...
    This is what I am using to track file handles when tried to open or deleted. Normally I am finding that backup/vss process has taken, antivirus was scanning, or indexing services were working. 
    I would recommend you to do the next:
    - Disable Windows Search from: Control Panel> All Items> Programs and features> Turn Windows Features On or Off> Uncheck Windows Server. Go to services.msc and Stop Windows Search service.
    - Exclude affected folder(s) or drive(s) from antivirus scan/protection, at least 24h.
    - Disable backup/vss operations on the drive(s) for at least 24h.
    Hope it helps, I know how itchy can be this kind of issue at the office :)

  • "File file path:to:file is already open" how do i close it?

    I am trying to write a script that pops up a dialog box, asks for text and saves this to a .csv and a .txt This is so i can quickly record what i am doing and the times i am doing it, makes quick notes and various things like that. However it is failing with the message "File file path:to:file is already open" so how do i close the file or get around this. Cheers
    Script Below
    tell me to activate
    display dialog "Enter the log message:" default answer "" buttons {"Cancel", "Ok"} default button "Ok"
    copy the result as list to {the log_message, the button_pressed}
    if the button_pressed is not "Cancel" then
    set curTime to (do shell script "date \"+%H:%M:%S\"")
    set curDate to (do shell script "date \"+%Y%m%d\"")
    set new_foldername to curDate
    set this_folder to (path to current user folder) as text
    set fPath2 to this_folder & "Documents:Logs:Date:" as alias
    --set this_folder to "Macintosh HD:Users:username:" as alias
    tell application "Finder"
    if not (exists folder new_foldername of fPath2) then
    make new folder at fPath2 with properties {name:new_foldername}
    end if
    end tell
    set fPath to (path to current user folder as Unicode text) & "Documents:Logs:Date:" & curDate & ":"
    set fName to curDate & ".csv"
    set myFile to open for access file ((fPath as string) & fName) with write permission
    write curTime & "," & log_message & return to myFile starting at eof
    close access myFile
    set fName2 to curDate & ".txt"
    set myFile to open for access file ((fPath as string) & fName2) with write permission
    write curTime & " " & log_message & return to myFile starting at eof
    close access myFile
    end if

    Hi Richard,
    Run this in the script editor:
    set f to choose file
    close access f
    Navigate to the file you left open. Probably there was an error and the file was left open because it never reached the 'close access' command.
    gl,

  • There was an error opening this document. This file is already open or in use by another application

    I cannot open any PDF documents. I receive one of two error messages:
    "There was an error opening this document. This file is already open or in use by another application."
    "This file is in use. Enter a new name or close the file that's open in another program."
    I do not know how to open the document in another program, so I am perplexed how it could be open in another program.
    I tried Repair the Adobe Installation from within Adobe Reader and from the Control Panel (Control Panel\Programs\Programs and Features\Uninstall or change a program) using the Change option. I'm assuming they are the same process, although I'm not sure. Neither method worked. I rebooted after each.
    I'm at work at a huge federal agency, so we're of course on a network. It takes several days to receive agency IT help, which is why I'm asking here. I can open Word and text documents. Nothing else seems to be amiss on the 'ol pc.
    Adobe Reader 11.0.05
    Windows 7
    As you can tell, I have only limited knowledge of the possible issues.
    Thanks!

    Shared network drive.
    I was not able to open the PDF documents via Notepad.
    Interestingly, and perhaps supportive of your hypothesis, I subsequently had problems with Outlook wherein I could not save or close an email I was writing because "you do not have permission." I rebooted my computer and now Outlook works fine (and it save my email, thank goodness), and I can open PDF documents.
    Hopefully it will stay this way. If not, I'll be back!
    Thank you very much for offering to help.
    All the Best,
    Mark

  • This file is already open or in use by another application Error Message

    I can't seem to save my AI files any more without getting an error message stating, "This file is already open or in use by another program." None of the previous forums have helped to resolve this problem. The problem begins when I open an Illustrator file that I have previously created, make a few changes, then try to save it under the same name. I am forced to change the name, which it then saves under the new name. Then, I have to restart the computer in order to delete the old file. This entire process takes enormous amounts of time. Working on WinXP using AI CS. I've researched this problem for months, but can't resolve it myself.

    Jenifer,
    I've been dealing with this problem for a year, and it is a big time waster. Here is a solution someone gave me which resolves the problem. However, there is a tradeoff- one problem for another.
    There is a file named aiicon.dll in Program Files > Common Files > Adobe > Shell. If you rename this file to aiiconold.dll (don't delete it), the problem with saving and deleting files will be resolved. However, the tradeoff is that you will lose your Illustrator thumbnails for your AI files. See for yourself. I've been doing it this way for a month or two, and I can live without the thumbnails most of the time. The nice thing about renaming the aiicon.dll file is that you can go back to the original name anytime, and everything will be as it was in the beginning.
    I guess Illustrator has an incompatibility issue with the new operating systems. I don't think there are any perfect solutions. But I keep looking. I am as frustrated with AI as you are.

  • "File is already open or in use by another application"

    I get "File is already open or in use by another application" when opening a PDF in Acrobat and Reader. Only happens intermittently.Files are on a network share.
    It doesn't seem to happen as often if Acrobat/Reader are already running. Sometimes it works on the 2nd try, other times it takes upwards of 7 or 8. Not entirely sure if this is an Adobe issue as I've completely reinstalled both programs.
    Any help would be appreciated. Thanks.
    Ben

    Jenifer,
    I've been dealing with this problem for a year, and it is a big time waster. Here is a solution someone gave me which resolves the problem. However, there is a tradeoff- one problem for another.
    There is a file named aiicon.dll in Program Files > Common Files > Adobe > Shell. If you rename this file to aiiconold.dll (don't delete it), the problem with saving and deleting files will be resolved. However, the tradeoff is that you will lose your Illustrator thumbnails for your AI files. See for yourself. I've been doing it this way for a month or two, and I can live without the thumbnails most of the time. The nice thing about renaming the aiicon.dll file is that you can go back to the original name anytime, and everything will be as it was in the beginning.
    I guess Illustrator has an incompatibility issue with the new operating systems. I don't think there are any perfect solutions. But I keep looking. I am as frustrated with AI as you are.

  • How to test if an external file is already opened?

    We have an issue when we write to an external file via the DBOpen and DBAdd functions. When we run two jobs simultaneously, they write to the same file. I know we can write to separate files, but we rather not. When the second job begins to do the write, at that point of entry for the second job, that record gets corrupted.
    I'm not sure if it is a DBOpen issue, or DBAdd issue, so I was wanting to try a test to see if the file is already open and bypass the DBOpen if it is. But I don't see anything that will test that other than the DBOpen function itself. When I capture the return code, the result is successful for both jobs. But I"m not wanting to do another DBOpen if the file is already open.
    How do I test for that?

    In the DBOpen call specification, there is a mode parameter which supports combinations of the following:
    * READ
    * WRITE
    * CREATE_IF_NEW
    * FAIL_IF_EXISTS
    You can combine multiple modes with &, so the 2 ^nd^ job should use DBOpen(table,handler,dfd,"WRITE&FAIL_IF_EXISTS") and you can examine the return code accordingly (1 = success, 0 = fail). That said, I don't think this is going to work. If you want to have multiple processes writing to a single file you're probably better off writing the records to a database table which supports this sort of activity. Otherwise you might consider having each job writing to a separate temp file, and then one of the jobs be responsible for reading both temporary files and writing out a 3 ^rd^ file containing all records.
    -Andy

  • Unable to add picture to Indesign file: error the file is already open.

    I am hoping that someone may have an answer for my question as I can't seem to find a solution anywhere else.
    The Setup:
    We have a primarly windows network with windows servers and network shares. (Yes all the shares are NTFS formated)
    We have six Desktop MACs OS X 10.5.4 added to this network and the MACs have loaded on them the complete Adobe CS4 suite.
    The problem:
    The issue happens when one of our users is attempting to drop a PSD file into an opened Indesign file.
    They user opens the Indesign file first from the network share in folder1, the user the goes to folder2 and attempts to drag and drop a PSD into the Indesign file they get the error the file is already open.
    So my first question what would be the most likly cause of this error?
    Second question is we also have a program called AdmitMac loaded on the MACs for authenication with the servers.
    Could this be interfering in anyway? AdmitMac uses Kerberos authenication, do the Adobe program recognise this Authenication type?

    grmg,
    There is nothing wrong with the ID file or the PSD file.  If the user moves both files to their desktop the drag-n-drop function works just fine.
    Even if just one of the files is on the desktop and the other on the network the drag-n-drop works fine.
    The issue is when both files are on the network server, that is when we get the error.
    Also it doesn't seem to matter what the file type is, the same thing occurs, if both files are on the Windows Server we get the "File already open" error
    The Artist just need to make links in ID to the picture files until the final revision.
    (We would perfer to keep the files on the server for backup purposes.  In the past we have had one to many contractors come in to do work and they do everything on the desktop and when they leave they sometimes delete their desktop.  As such the files never gets backed up.)
    I need to know what tweak, change or update I can apply so that both files can be on the server and the Drag-n-Drop function still works.
    thanks for the reply.

  • Page Viewer Webpart getting error: This file is already open or in use.

    Management wants to have a Goal Chart to be updated daily with new information without having to get myself involved.  All they want to do is save to a Network location and have SharePoint Intranet site use this location to display.
    My background is an Intermediate power user, no development.  After researching I thought I could use the Page Viewer Web Part by using the File and then specify the Network location.  This worked only once. 
    When management or myself tries to save the updated PDF to the Network location get the following error message:  This file is already open or in use.
    Please let me know the best way for management to update a network location to update the SharePoint Intranet site. 
    System is SharePoint 2010 foundation.

    This is what I did and it works fine for the original document.  I want the user to be able to save to the same location on the Network to have the new PDF display within Sharepoint.  When I try to save over the original PDF, I get an error message
    when I try to save:  The file is already open or in use. 
    How do I get around getting this message. 

  • E-edition freezes up with 1A.pdf The max. number of files are already open no other files can be opened or printed until some are closed , showing four of five and computer froze any I must close by shutting down manually.

    My online E-Edition newspaper will freeze up after loading the front page and gives me the message that the max. number of files are already open and no other files can be printed or opened until some are closed. 1A.pdf. When you click ok it repeats itself and you have to force shutdown by holding off button. I'm totally stumped.

    I have read that "1000" is default maximum for Acrobat 4 or Acrobat 5 (I don't remmember it exactly anymore). Concerning my PC and RAM. I have a high-end graphical computer at my office; so I'm sure the RAM memory is not the reason.
    Anyway, thanks for answer.

  • Error message "The document could not be saved. This file is already open" when trying to complete an electronic signature.

    Running Adobe Acrobat Professional 10.1.0. I cannot upgrade to newer version because several applications were already tested on this version.
    When trying to complete an electronic signature, my users receive the error message ""The document could not be saved. This file is already open".  When they close and open the file again to try to sign again they find a corrupted electronic signature.  Instead of a clean signature with the box colored in light blue they see their signature with the embedeed message Click Here to Verify & Sign with the box colored in grey.
    We turned off antivirus in the Sharefolder where the forms are stored and nothing.  We turned off the antivirus on the client and nothing.  We stored the files in another server and nothing.  One workaround is saving the file in the desktop, signing it, and then back to the Sharefolder.  Another is saving the file with a different file name.
    I've searched and the only similar thing was caused by the Windows Preview Pane.  See Information Transmogrification: Adobe Acrobat saving a file does not work, displays “File may be read-only”.  No luck with this one too.
    Is definitively an intermittent problem.  The users that experience the problem experience it intermittently.
    This started to happen when we move our computers to Windows 7.
    Any ideas?

    Correction on Question:
    This is a web application and the users need to be able to load the editable .pdf form from the website, edit it and submit it back to the website from within Internet Explorer.
    Users began getting the error message:
    'The document could not be saved. This file is already open.'
    last Friday after having no problems prior to this. Some users can edit the editable .pdf forms on the website and save the file with the same name to the website. Some get the error mentioned in the subject. 
    We really need help getting this resolved.
    Sandy Martin

  • The document could not be saved. This file is already open.

    This problem recently developed.with several versions of Acrobat Reader 9.x installed. The full version of Acrobat is not installed.
    Users used to be able to open an editable .pdf file in IE, edit it and save it. Some users can no longer do this. The are getting
    the error message "The document could not be savedl. This file is already open. Users who are able to save from within a browser, are actually
    using Acrobat Reader, which opens when opening the .pdf file from within the browser. Everyone can open Acrobat Reader V 9.x, edit an editable .pdf file and save it. It is just when the .pdf file is opened from a browser application, and the reader is not also launched. Help! This just started happening.
    Thanks,
    Sandy

    Correction on Question:
    This is a web application and the users need to be able to load the editable .pdf form from the website, edit it and submit it back to the website from within Internet Explorer.
    Users began getting the error message:
    'The document could not be saved. This file is already open.'
    last Friday after having no problems prior to this. Some users can edit the editable .pdf forms on the website and save the file with the same name to the website. Some get the error mentioned in the subject. 
    We really need help getting this resolved.
    Sandy Martin

  • I tried to export an iMovie to quicktime and got this pop up message, "file is already open with write permission" How do I resolve this. thans

    I tried to export an iMovie to quicktime and got this pop up message, "file is already open with write permission" How do I resolve this. thans

    Turn off Time Machine before you open iMovie. It's a semi-known issue right now.
    https://discussions.apple.com/message/17032254#17032254

  • Function module to check if a file is already open

    Hi All,
    Could any one of you tell me a function module which checks whether a given file on the application server is currently being open or not.
    Regards
    Amit Mishra

    Amit,
    Try GET DATASET.
    Basic form
    GET DATASET dsn.
    Extras:
    1. ... POSITION pos
    2. ... ATTRIBUTES attr
    In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. For details, see File Interface.
    Effect
    Used to get the properties of a file already open.
    You can use this statement without additions to determine whether the file is open.
    If the file is not open, an exception of the type CX_SY_FILE_OPEN_MODE is triggered.
    Regards,
    Rao A
    Message was edited by: Rao Arimilli

Maybe you are looking for

  • How do I use iBook App on iPhone 4S?

    Hi I realized on my iPhone 4S that I have an app called iBook.  I noticed it has a section for books and one for PDFs.  How do I download my PDF knitting patterns to it so that I can always access my patterns? Have no idea how to use this app.  Any a

  • Reg usage of break point in debug mode

    Dear experts,    I want to know how to go to a particular line in debugging mode. Suppose for example, if a program contains main program and includes.  I want to go to a particular line in debugging mode in the includes. How can i go? kindly help me

  • Help in JAVA stored procedure

    Hi, We need to interface a JAVA application from a pl/sql block. We are using JAVA stored procedure to do the same. This stored java class ( that we call from a PL/SQL procedure) has the statement ( " textFont = new Font("Arial", 0, 11)" ) where a Fo

  • Random Kernel attacks ... can you have a look at the log and maybe help me out?

    Hello, i have an old macbookpro since 2006 and i am getting random kernel attacks during booting up. Here is a copy of the log that i dont understand at all. Can someone have a look at it so that if a peripheral is responsible i could remove it etc?

  • My wifi on my ipod not working HELP?!?!?!?!

    im on ios 6.1.2 and my ipod has randomly said incorrect wifi passcode even though i put in the right passcode i really need help and fast btw my laptop ***** HELP:(