FM for getting the capacity of given work center

Hi all ,
1) Is there any function module to get the capacity of the workcenter .
2) how to know the number of hours that work center works .
Please mention the field which represents the capacity .....
Regards
Raj

Hi ,
You can use .
CHEeck out Transaction C0R4 .
Field is BEDID .That is Capacity Id in table KBED .
BEDID is there in table AFKO or AFPO .

Similar Messages

Does anyone have a fix for getting the facetime camera to work with Skype?

I have been trying to skype with my daughter on my iMac, intel. I've downloaded 7.0.02 ... the newest OS. The camera will not work with Skype. Any fixes yet, Apple?

Have you posted this in Skype forums?

Capacity cumulation in work center hierarchy

Hello
Does anyone uses workcenter hierarchies to cumulate capacity requirements ?
I've created a hierarchy but in the capacity evaluation transaction cm01,
the capacity requirements are not cumulated from the underlying work center.
Instead a capacity requirement of zero is shown on the hierarchy work center.
Is there any specifics to cumulate the capacity requirement to work center hierarchy header
Best regards
Pascal

Hi,
In the transaction CM01, choose the pull-down menu Settings-> General. In the pop-up screen, under the "Herarchy" tab, select the check boxes "Cumulation of reqmts" and "Dyn. capacity cumulation", choose the "Hierarchy" and "Plant" and click on "Continue".
Now the "Available Capacity" will be as per hierarchy setup and Rem. avail cap = Reqmts-Available capacity.
Hope this solves the requirement.
-Thaila Shree

Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

Hi deamayfield,
Thanks for visiting Apple Support Communities.
If your Music app is unresponsive, try restarting/resetting your iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Best,
Jeremy

Saved download for Camera Raw update. still can't open Raw pic in CS5. How do I get the downloaded files to work so I can open Raw images? thanks, Artist Ray

Bought new camera to work with Raw images in CS5 but file would not open so I downloaded latest update. It only allowed me to save in a file ( could have OPENED instead of saving so I don't know those results). How do I get the new download to work in CS5?
Thanks for your help, Artist Ray

Bought new camera
Which camera make and model?
Supported cameras
Camera Raw plug-in | Supported cameras
Compatible Adobe applications
Camera Raw-compatible Adobe applications
Why doesn’t my version of Photoshop or Lightroom support my camera?

The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.

The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. THis happened in the middle of a download. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.

Just re-set the App -
Open the App
Hold down the power button until the slider appears
Hold down the home button (Don't use the slider) Until the App Closes
You might lose your place, but shouldnt be too hard to find it again...

On Apple TV, my pictures have loaded, but I cannot get the slideshow function to work. It has been "loading" 28 pictures for over 5 minutes. What is wrong?

On Apple TV, my pictures have loaded, but I cannot get the slideshow function to work. It has been "loading" 28 pictures for five minutes. What am I doing wrong? I have Windows 7 on my PC.

I don't have any direct experience with D-Link equipment, but I may be able to provide some general advice. See if you can use a Web browser to connect to the D-Link's configuration screen. This probably involves visiting a URL such as http://www.192.168.0.1 . If you haven't changed the sign-on parameters, a quick Google search should find them for you.
Once there, note as many configuration details as you can find. You'll need those to configure your Time Capsule.
Use the AirPort Utility to configure the Time Capsule.
One last thing: It's quite possible that the Verizon network will have locked onto the "MAC" address of your D-Link router. Something needs to be done to reset this. If there's a separate box at your house that came with the FIOS equipment that's "upstream" from the D-Link router, I'd cycle power on it to see if that does the job. Otherwise you'll probably need to call Verizon to ask them to reset things once your Time Capsule is installed in place of the D-Link router.

Cannot get the Mobile Template to work in SharePoint Foundation 2013

Hello all,
I am trying to get the Mobile View to work in SharePoint Foundation 2013. When I access the site on any phone it gives me the following error:
"Cannot complete this action. Please try again."
The URL it forwards me to is "http://<sitecollectionurl>/_layouts/15/mobile/mblwpa.aspx?Url=%2Fdefault%2Easpx
So it seems to me like it's working, but there's something wrong with the template. The template has definitely never been modified.
Can anyone help?
Thanks,
Vinny
Vinny

So I've got some more info for this issue. We are seeing:
Control template "Mobile_STS_HomePage_Redirect" does not exist.
Control template "Mobile_1_HomePage_Redirect" does not exist.
Does anyone know how to enable these? I tried by name, but it doesn't find them. This is the error I get:
PS C:\> Add-SPSiteSubscriptionFeaturePackMember <FeaturePackGUID> -FeatureDefinition Mobile_STS_HomePage_Redirect
Add-SPSiteSubscriptionFeaturePackMember : Cannot find a Feature object with Path or Id: Mobile_STS_HomePage_Redirect in scope Local farm.
At line:1 char:1
+ Add-SPSiteSubscriptionFeaturePackMember <FeaturePackGUID> -Fe ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...aturePackMember:SPCmdletAddSite...aturePackMember) [Add-SPSiteSubscriptionFe
aturePackMember], SPCmdletPipeBindException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletAddSiteSubscriptionFeaturePackMember
Vinny

How do I get the RSS feeds to work in iWeb'08 when published to FTP server?

There are so many unresolved questions because I have published to an FTP server (Netfirms). HOWEVER, my next task at hand is to resolve the issue of a non-working RSS feed and download capabilities.
The published website is www.vibrationalvoyages.com.
When using Cyberduck to upload to Netfirms, I have to call the file name vibrationalvoyages.com because Netfirms organizes my files under a main folder called www (I also purchased the .org and .net extensions along with the singular spelling of the title, have forwarded those url's to the .com extension, which means I have different website names under Netfirm's main folder www, all pointing to www.vibrationalvoyages.com).
I have to drop the www. in front of vibrationalvoyages.com when publishing to a folder on my computer so, when Cyberduck uploads the files into the main www folder, they are read correctly and published as www.vibrationalvoyages.com. In Cyberduck, the ftp address to upload is vibrationalvoyage.netfirms.com
Before uploading, I use iTweak to insert the Statcounter tracking codes. Then, I use Rage to optimize the site to cut down on the weight (lots of photos). Then, finally, I get to upload which takes about an hour and a half.
SO, HOW DO I GET THE RSS FEEDS TO WORK AS WELL AS THE OPTION TO DOWNLOAD AN MP3 RECORDED MEDITATIONS? I eventually also want to include the download option of podcasts.
Please help! I am doing the best I can to stay in love with Mac but he is turning out to be a pot load of work and the love affair is wearing a little thin.
I haven't even asked about why iWeb still calls some pages 'The family picnic" or why it switches the url addresses to the individual pages. Probably because in the early stages, I copied an entry rather than just do a new one... but I'll worry about that later. I want to get this 'fixed' first and then I'll address the issue, following Roddy's advice to another writer about installing a flash player, for easy download of the MP3 meditations and for when I record the lessons as podcasts. Until I get this RSS issue resolved, however, podcast downloads are out of the question!

Thank you for checking, Tom,
I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
On both error messages, the URL I was checking was:
http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
The last URL was, of course, the URL generated by iWeb.
So, my question still is:
HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
Any ideas?
GG

I get the "firefox has stopped working" message after closing browser

Hello.
My problem is that when I close the FireFox browser I get the "FireFox has stopped working" message. It's pretty annoying. I've read some other posts here that described a similar problem and have tried some of the suggestions in them including:
A clean install, a browser reset, running in safe mode, unchecking hardware acceleration, disabling extentions and plugins one at a time, uninstalling my antivirus (avast), rolling back to version 23.01 and checking run in compatibility mode that someone claimed helped them. None of this was effective.
It seems like after a computer restart the browser will be ok for 2-4 closings and then it will start with the message on every closing. Also, after I uninstalled avast it was good for 6 closings. Rolling back also gave me about 6 message free closings. But then the messages start and doesn't stop.
Is there anything else I can try? Thanks in advance for any suggestions.

One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time.

How do I get the new iPod to work with iTunes

I recently purchased a new iPod--I think it's the "Shuffle," whichever one retails for $150. When I plugged it into my iMac, it said I needed to install iTunes 10 to run it. When I checked for updates, it said that iTunes 9.xyz (whatever came after the 9) was the latest version.
How do I get this new iPod to work. As you can tell, I am not much of a gadget junkie, and I'm a bit of a technology incompetent, which is why I purchased the Mac to begin with. I have an iMac, have no idea what operating system I am using--whatever came with it when I purchased it in November, 2008.
TIA!

Okay, I just looked and I do have 10.411. How do I upgrade to get the new iPod to work, and how much does the new operating system cost?

Can't get the nvidia module to work.

Hi,
I just moved a machine from debian to archlinux due to the newer packages. Anyways, since yesterday I have been trying to get the nvidia module to work but haven't had no luck. Basically I get a black screen once I run startx and afterwards I can't switch back to any of the consoles. The system doesn't hang because I can SSH into it from another machine and do whatever. Killing all the x-related processes doesn't recover the screen, only restarting the computer gets the ttys back.
I have tried several different nvidia module versions include 1.0-7664, 1.0-7174 and 1.0-6229. I have also the stock 2.6.11.10 kernel and a custom compiled 2.6.11.11 kernel. If that wasn't enough I have tried the xorg generated xorg.conf file and the hwd generated xorg.conf file. Below is what I am running.
xorg 11R6.8.2-2
eVGA nVidia GeForce FX5200 (The LCD is connected through the regular VGA port)
xorg.conf: http://68.190.122.245:9696/temp/xorg.conf
Xorg.0.log: http://68.190.122.245:9696/temp/Xorg.0.log
nvidia-installer.log: http://68.190.122.245:9696/temp/nvidia-installer.log
`hwd -s` output: http://68.190.122.245:9696/temp/hwd_s.txt
Any help is really appreciated!

Nice to see logs and confs posted
just to be sure we are singing from the same hymnbook, have you:
-- followed the wiki info as your logs show the DRI section still intact (bottom of xorg.conf)
and from wiki,
-- installed nvidia via pacman, with X server shut down. and then modified xorg.conf accordingly.
# Auto-generated by Archie mkxcfg
? Archie ?
-- following the kernel upgrade did you then run pacman -S nvidia, as above, to incorporate it with the new kernel ?
other tidbits
maybe try backing up xorg.conf first and then removing redundant lines #'s etc to make your config file more readable, and 1, 4, 15 bit resolution entries too.
The last time i had the blackscreen was in Fedora, it was mentioned that a kernel patch by fedora, was fouling the nvidia drivers. So i blamed fedora, chipsets, patches, drivers, witchcraft etc. Swapped to arch , followed the WIKI destructions and all worked ok. so im sure it can be solved here too.
FWIW my xorg.conf can be found here if you want something to refer to. in the interests of jurisprudence, copy/modify at your own risk. i cant/wont pay for fried monitors
incidentally nv in the Section did work for me instead of nvidia but was no real solution as i wanted to use GL and it wouldnt work with it, just runs a generic vga driver and not the nvidia one.
persevere dude, and good luck.

I have a MacBook, made in 2010. I can't get the eject function to work. I have a DVD in now and want to eject it and put another one in. Command-E, dragging it to the trash or Find-Eject does not work. Ideas?

I have a MacBook, made in 2010. I can't get the eject function to work. I have a DVD in now and want to eject it and put another one in. Command-E, dragging it to the trash or Find-Eject does not work. Ideas?

Hi there. Hear are some other options . Hold down for click on the track pad while restarting and keep it down all the way thru boot. Or use right click on a mouse. If it's stuck, sometimes sticking a business card in top edge of slot while trying the eject option can work.

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

How to get the garbage collector to work?

Hi,
i have i program where i load an image scale it down and save the scaled version in an array. I do this for a whole directory of images.
After every image i set the temporary variable for the loaded image = null and call the function System.gc().
My problem is, that the garbage collector does�nt give the memory of the loaded image free and the used memory of my program grows with every loaded image.
/* Reads all images from a folder an stores them in an Array of images */
     public static BufferedImage[] readScaledImagesFromFolder(String folder,
               int maxSize) {
          File dir = new File(folder);     /* Open the Folder */
          String[] children = dir.list();          /* Get the children of the folder */
          if (children == null) {
             // Either dir does not exist or is not a directory
              System.out.println("No images in the folder!");
              return null;
         } else {
              /* Init array for images */
              BufferedImage[] images = new BufferedImage[children.length];
              int i = 0;
              int index = 0;
              BufferedImage temp;
              String filename, fileending;
             for (i=0; i<children.length; i++) {
                  // Get filename of file or directory
                 filename = children;
     /* Get the fileending of the file */
     fileending = filename.toLowerCase().substring(filename.length()-4);
     if(fileending.equals(".jpg") || fileending.equals(".bmp")
               || fileending.equals(".png") || fileending.equals(".gif"))
          /* Read the image */
          temp = util.ImageUtils.loadBufferedImage(folder+"/"+filename);
          /* Scale the image down and save it in an array */
          images[index] = Util.getScaledImage(temp,maxSize);
          index++;
     temp = null;
     System.gc();
     Mosaic.sourceImageNum = index;
     System.out.println((index+1)+" resized pictures loaded from folder: "+folder);
     return images;
How can i get the gargabe collector to work after every iteration?
I tried to let the Thread.sleep(10) after System.gc() but it does�nt help.
Thank you every much
JackNeil

Hm yes.. i now that System.gc() is only a
suggestion.
But i know what my program is doing and that it
does�nt need the temporary image anymore after i have
a scaled down version. And the temporay image will become unreachable as soon as reading the next one overwrites your temp variable. Setting the variable to null doesn't have much effect.
It would be smarter to load the new image over the
old temporary image and not to expand the heapsize to
maximum.Then look at the possibitly of loading the next image into the same bufferedimage.

FM for getting the capacity of given work center

Similar Messages

Maybe you are looking for