FM Radio

Can anyone advise me. Just taken delivery of the new Apple FM radio tuner with remote. Can't get it to work thru the my 5G video iPod.
As instructed I click on Music and then scroll down to settings but the radio setting doesn't appear! The remote is working fine so the connection is OK.
Any advice anyone? Would be very much appreciated.

many thanks, I asked the question on behalf of my son. He is out tonight but will try it tomorrow. As his iPod was purchased in Oct 05 before the date of the 1.1 software, I think this is probably the solution.
thanks again.

Similar Messages

  • HT201272 I purchased songs from iTunes Radio on my iPhone, but now the only place they will show up is in the iTunes Store app on my phone, even after syncing to my computer a million times, the songs do not show up in my library or anywhere else.

    I purchased songs from iTunes Radio on my iPhone, but now the only place they will show up is in the iTunes Store app on my phone, even after syncing to my computer a million times, the songs do not show up in my library or anywhere else. My phone is not syncing properly, I wanted to add another playlist to it that I created on my Mac. I pluged in my phone and made sure the playlist I wanted to add was checked to be on my phone when I synced.
    The playlist I wanted to add was "Country." It is clearly checked. I also wanted to add the "Recently Added" playlist, which I also checked before sycing. Currently, my phone only has the "Purchased" playlist and my "All Songs" playlist on it. When I hit sync, iTunes added another playlist automatically added another playlist to the list above and checked it. It was titled "ALL SONGS 1" and had ten fewer songs in it than the playlist I had created, "ALL SONGS" had. This playlist, however does not show up on my phone after syncing, nor does "Country" or "Recently Added." (Every time I sync, another playlist is created as "ALL SONGS 2, 3, 4, etc.") One of the songs (I have not, yet checked the other songs) that I purchased from within iTunes Radio shows up in the "ALL SONGS 1" on this screen:
    But does not show up anywhere else. This playlist does not show up anywhere but the two screens above. The ALL SONGS 1 or 2 playlists do not show up here:
    When I search for those song in my library, it shows that I do not have them:
    But if I go to the iTunes store, I get the play button and not the price of the song:
    This is what things look like from my phone's side of things:
    "Summertime Sadness," one of the songs I bought from iTunes Radio, does not show up in the iTunes store under purchased "All" or "Not on This iPhone"
    But, it does show up under "Recent Purchases"
    Also, this is what playlists are on my phone after syncing a million times:
    Only what was on there before I started any of this. "Summertime Sadness" and the other songs I bought from inside iTunes Radio, do not show up in either of these playlists. Please, help me.

    Hi Petrafin,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots.
    You can download your purchases directly to your computer.
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    Cheers,
    - Judy

  • Follow up on JB versionJRO03O and radios i515.10 vFF02/ I515. FG02

    JB versionJRO03O and radios i515.10 vFF02/ I515. FG02
    The developers i know who have been using this versionof JB and new radios report everything seems to be working great no lost signal or dropped calls
    looks to be ready for primetime now we need verzion to push to all .  But i suspect S3 will gt JB first
    This is an official OTA but only released to those who had 76Q ICS.
    With a little research you will see how well it works

    Android police is where I have found most with links to the needed
    software.
    On Sep 6, 2012 9:00 PM, "mariomerendino" <[email protected]>

  • Photosmart c309a- 'The wireless radio is not functioning, contact HP support'

    My Photosmart c309a wont connect wirelessly. Upon running the wireless network test, the report states, and I quote "The wireless radio is not functioning. Contact HP support". The report then states the following:
    Wireless on                    PASS
    Wireless working         FAIL
    and everything following that stated as 'not run'.
    Ive searched for other threads on the subject, and the only sloutions I can find are unplug the printer and plug it back in to reset it (made no difference), and try the HP print and san doctor (link was dead, found it manually and didnt work as it cant connect to or even see the printer on the network).
    So the question is, is this a hardware fault, and if so what can be done about it?

    Hello,
    Yes, it is an hardware issue and indicates that the Wireless card is not functional.
    Please call HP Tech Support for further assistance.
    If you are in US , the toll free # is 1-800-474-6836 .
    If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the white star under my name.
    Click "Accept as Solution" if it solved your problem, so others can find it.
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • How to use my iPhone 4 to select Internet radio stations on MacBook Pro

    Okay, once again I return here to seek guidance and wisdom.  Fellow members here told me about Air Video, a terrific set of programs for iOS and OS X to stream videos from my MacBook Pro to my iPhone 4.  It is awesome!
    Now, my other need (?).  I want to run something on my Mac that lets me select Internet radio station streams like TuneIn for ex., but I want to be able to change selections on whatever is on the Mac from the iPhone 4.  What I want to do is use the iPhone 4 as a remote for the app on the Mac which I want to connect to either some external speakers or someday to a real external Dac, amp, and speakers.
    I have the TuneIn Pro app on my iPhone 4 already and on the Mac via browser have accessed their website.
    Now someone surely is going to mention Airplay or something to stream from the iPhone4.  From the cost of Airplay capable hardware, I just can't afford it yet.  Maybe if I could find Bluetooth speaker or device?
    One other thing to throw in for thought.  I have not only iTunes on my MacBook Pro, but also Fidelia and Amarra, and thinking about Decibel or Audirvana.  In other words somewhat hi-def music output quality available on the Mac.  So....I do have a remote app for Fidelia and think there's one for either Decibel or Audirvana, so that brings me back to Internet radio on the MacBook Pro.  If I can find a way to use the iPhone 4 to select an app on the Mac for Internet radio, I can play those plus hi-def music via one of those programs.
    I probably didn't say all that right, but I hope you can decipher what I am asking about.
    If nothing else, can you recommend inexpensive Bluetooth speakers to play radio from the iPhone4?  I was hoping to buy some AudioEngine powered speakers for the Mac, hence the desire to run all sound/music through that device but using the iPhone4 as control device.

    Hi Starbux48
    First off. The benefits of using Amarra, Pure Music, Audirvana or whatever, can only be heard if you have a true audiophile system set-up. Think of systems starting from 5000 U$. Then only if your music files are high resolution. Think ALAC or FLAC, AIFF or Wave.  For all other music playing the itunes set-up suffices. So the better idea for you will be playing the music over your macbook.
    Mountain lion offers airplay for intel based macs. You can use this. If you install the free Remote App. on your iPhone, you can use that to control itunes on your Macbook via wifi/Airplay. The remote app offers you the view of itunes on your Macbook and the screen of your Macbook changes with what you do on your iPhone. So you can even control the itunes radiostation from your iPhone.
    If you have an older, non-intel macbook, you can install airserver on your macbook. This will set you back 15 dollars or so, but will basically do the same.

  • Using a Radio Button to Disable Multiple Checkboxes

    Hi everyone,
    My name is Christian and I am trying to design a form using Adobe Designer 7 that when a user selects a group of two radio buttons (one marked Macintosh and one marked Windows) it automatically disables 3 or 4 checkboxes of various software applications further down the page.
    The idea is if you select the Windows radio button, you would not be able to select the iWorks or StuffIT checkboxes (as that is Mac software), but conversely if you check Macintosh radio button the iWorks and StuffIT checkboxes activate but the Office 2003 and Microsoft Money checkboxes deactivate (because that is Windows software).
    Im not really a developer so any assistance would be appreciated. Thanks for reading and have a great day! :-)
    Christian

    I suspect that you have a problem in some portion of your code that you have not posted. To help debugging I suggest you create a simple test using two pages: input.cfm and action.cfm.  Get the most simple case working then add the javascript, css, and CF code to make your application work.
    <!--- contents of input.cfm --->
    <html>
    <head>
         <title>Input</title>
    </head>
    <body>
         <form action="action.cfm" method="POST">
              Choose type: <br />
              <input name="type" type="radio" value="male" />     Male<br />
              <input name="type" type="radio" value="female" /> Female<br />
              <input type="submit" />
         </form>
    </body>
    </html>
    <!--- content of action.cfm --->
    <html>
    <head>
         <title>Action</title>
    </head>
    <body>
         <cfif form.type eq "male">
              Type is male.
         <cfelseif form.type eq "female">
              Type is female.
         </cfif>
         Here is a cfdump of the form variables:<br />
         <cfdump var="#form#" />
    </body>
    </html>
    Message was edited by: JR "Bob" Dobbs
    Added sample for action.cfm

  • Is there a way that iTunes can act as a Radio Alarm Clock? I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on and start playing that Radio Station from Sleep mode at spec

    Is there a way that iTunes can act as a Radio Alarm Clock?
    I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on from Sleep mode and start playing that Radio Station at specific times of the day?
    Any App or plug-in that does that?
    Many thanks
    Kevin

    Turning your Mac into a clock radio.
    1.  In iTunes create a playlist that contains just the radio station you want to wake up to.
    2.  Export the playlist (as .m3u works well).  Get Info on your playlist file and look at the Open With entry to make sure it points to iTunes, VLC or some other app that will stream your station.
    3.  In iCal create an event entry at the time you want to wake up.
    4.  Right (or Control) click on your wakeup event and select Get Info.
    5.  For "alarm" select Open File.
    6.  Now under Open File there will be a place to add the file to open.  It will probably be some default entry (like iCal).  Click on it will allow you to select "other."  Then use the file dialog to select your playlist file.
    Your Mac will wake you up at the appointed time.  You don't need to keep iCal running.  If you want to put you Mac to sleep for the night then there is one more thing you need to do.  Open System Preferences to Energy Saver and click on the Schedule button.  Check Start up or wake and set the wake up time to slightly before your iCal alarm time.
    Dan

  • Is there a way to play two radios at once?

    I usually listen to music using the Songza, Pandora, or iHeart Radio app. Recently I started listening to a news talk radio through the iHeart Radio app. I want to continue listening to the news talk shows, but I'd like to listen to music in the background. Is it at all possible to have two radio apps playing at the same time?

    Another option is to make a smart album with the criteria: Album is XXXX and Album is YYYY. Rather awkward but would work.
    OT

  • HT5848 I do not have the tab for iTunes Radio on my phone or either of my iPads. After the original update it appeared on my mini iPad and my phone but not the iPad 2. After the most recent update it is no longer on the phone or mini. How can I restore th

    Am I the only person having this problem? When I ask Siri to open iTunes Radio the last station I used comes up but I cannot open iTunes Radio.

    The App icon for iTunes and Music look virtually the same, so are you looking in iTunes or Music.  iTunes Radio is in Music.

  • ITunes no longer connects to many of the radio stations that it used to

    I recently patched the new upgrade version of iTunes. I decided to wait this long so they could work out some of the bugs first. Apparently it still has some. And this post applys to both the Mac and Windows versions.
    I used to enjoy listening to the di.fm Chillout station in the Ambient section of iTunes. After I patch this new upgraded version of iTunes it will no longer connect to the station. This by no means is hindering me from listening to my station, but it is taking away the convenience of doing it all through iTunes. The new version also cut off many other radio stations as well (unable to connect).
    Andbody have a clue if Apple is ever going to fix this?

    Some things to try:
    • try connecting via ethernet
    • turn Airport off and then back on, or go to System Preferences -> Network and select Renew DHCP Lease
    • from System Preferences, create a new network location
    • turn the router and/ or modem off, wait 15 seconds, turn them back on again
    • zap the PRAM:
    http://support.apple.com/kb/HT1379
    • check and possibly adjust the security settings on the router
    See if any of those work for you.

  • Read Only Display of Radio group and Text area with counter not working

    Hello,
    I am using Apex 3.2, with 10g for the database
    I have this form, with fields that will set to read only when status = 'closed'
    All of the fields display as read only except for 2. I cannot figure out why this is not working correctly.
    1st field is Issues that is a text area with character counter, with a sql query behind it, that is set to null unless the query is pulling in the data.
    2nd field is Status which is a radio group that will not display as read only when status = 'closed'
    I have other fields on the form with the same format and they change to read only when the status = 'closed', I have even copied the pl/sql expression from one field to these fields and it still doesn't work correctly. I have also tried javascript for an on load event, which works, but once I click on the save button, it disables all of the page items, which works correctly, but I purposely forget to enter information, to make sure the validations are firing correctly, which it does, but the script disables everything, not allowing me to correct the errors. The javascript is firing on the on page load event.
    Any help on this is greatly appreciated.
    Mary

    Dung,
    That API seems to have a bug, it returns true/false/null, so you could use 'return not nvl(htmldb_util.current_user_in_group(p_group_name => 'APP Admin'),false)' to get a false value.
    Unfortunately there's another problem: using the read-only attributes for checkbox or radiogroup item makes them hidden. My suggestion would be to create another item that has disabled="disabled" in the HTML Form Element attribute in the item definition and display that item or the non-disabled item alternately, using conditions based on the current_user_in_group logic.
    Scott

  • Read-only radio group losing value on validation error

    It took quite a while to track this down, but I think I've got it narrowed down properly. I have an APEX form for updating a record in a databse table with a radio group which is conditionally read-only. If that radio group has a value AND is read-only, when the form is submitted and hits a validation error, the value of the radio group is lost.
    For example, the radio group SUBMITTED_FOR_APPROVAL is set to Y and is read-only for a given user. That user then changes something else on the form and submits it. However, the form now hits a validation error for some field. When the form reloads with the validation error displayed, all the fields are restored except the read-only radio group which is now blank. If a select list is used with the identical read-only condition, it works fine. Likewise, if a radio group is used, but the read-only condition is removed, it works fine. It is only when it is a radio group and it is read-only, that the value does not appear to be submitted to the session with all the form values whent he form is submitted.
    Is this a bug or am I simply missing something?
    Apex 3.1.2
    Rgds/Mark M.

    It's using a shared component LOV cleverly called LOV_YN which consists of a static LOV with
    1 Display=Yes, Return=Y
    2 Display=No, Return=N
    The settings in the LOV section on the item iteself:
    Named LOV: LOV_YN
    Display Extra values: No Dynamic translation: Not translated
    Number of columns: 2 Display null: No
    Null display value is blank as is null return value
    Item was setup as a radio group and was only converted over to a select list to work around this issue. Let me know what else you need and thanks again.
    Rgds/Mark M.

  • Read-only radio button or checkboxes save as null

    Hi,
    I have a form with some fields that are editable by 1 group of users and read-only for another group in certain conditions.
    Before the header there is a fetch process to retrieve values from tables. So most fields (read-only & editable) are populated including checkboxes & radio buttons.
    All users can edit at least 1 field on the form.
    When the save button is pressed a PL/SQL process runs to save the data.
    The save works if the field is editable.
    If the field is read-only and text it also works.
    But if the field is a radio button or checkbox a null is saved in the table.
    Any suggestions on how to get the PL/SQL to pick up the read-only radio buttons and checkbox values?

    Hi,
    I had the same problem in my application and I found another solution instead of using two items. I'm using a computation on page processing that makes a select on my table to get the value for the checkbox. I'm doing this with the same condition as my read-only condition on my checkbox item so I can get the database value when it is lose in the submit process.
    Also, I found a difference in the html code between the read-only state of the item and the standard state.
    Original state : name="p_v07" (7 because it's the seventh item on my page)
    Read-only state : name="checkbox"
    I tried to modify this using firebug in execution of the page but without success, the problem is still there.
    Patrick
    Insum Solutions

  • IMac 10.6.8 and new itunes 11.1.1  NO RADIO

      no radio showing anywhere.  Im in NC.  what am i doing wrong???

    To use iTunes Radio, you must have iOS 7 or OS X Lion v10.7 or later, iTunes 11.1, or Apple TV 6.0 or later installed on your device or computer as well as an Apple ID for use in the iTunes Store.

  • Can not find the radio in the menu on my iMac

    THE RADIO IS NOT SHOWN ON THE ITUNES MENU. SEEMS TO HAVE WENT AWAY AFTER DOWNLOADING UPDATE.

    Check iTunes > Preferences > General and be sure you have a checkmark next to "Radio"

  • How can I select a radio button in a table regarding the data in the cells?

    Hi everyone
    This is the issue: I need to select the RadioButton which is in a table with data related to transfers in the cells next to it, so I need to select the correct radio regarding the data next to it.
    This is the whole process: First I go to the Add Recurring Transfer section and select the parameters of the transfer (Accounts, date, amount, months etc), then with VB code I capture those parameters from the page and store them into Global variables for further usage on my E-tester script.
    Right after that I need to select the radiobutton regarding the data of the transfer that I already created in order to delete it or modify it (Please see Attachment selectradio1.jpg)
    So How can I move along the table and compare each cell with the variables that I created with the transfer information, so when I finish comparing a row cell by cell and if all the comparison match well in that row, I could select the radiobutton of the row.
    Note: Second Attachment selectradio2.jpg shows the source code of the table...If you need more info please let me know
    Could you please help me with this problem?? I'm Kind of frustrated with this issue jejeje

    Here is an example. I uploaded mock html so that you can actually try this code. I think this does exactly what you are asking.
    Private Sub RSWVBAPage_afterPlay()
    Dim tbl As HTMLTable
    Dim tblRow As HTMLTableRow
    Dim tblCell As HTMLTableCell
    Dim strValue As String
    Dim rButton As HTMLInputElement
    ' ******** This would be your global variable. I put this so that values are seperated by a semicolin you can use what ever format works for you.
    strValue = "03/22/2008;03/22/2008;*************1977;*************1977;$25.25;Jan, Jun, Jul, Dec"
    ' Strip out the ; for inner text comparison
    strValue = Replace(strValue, ";", "")
    ' This will get the table but can be modifoed to be more specific
    Set tbl = RSWApp.om.FindElement(, "TABLE")
    ' This loops through all the rows in the table until a match to the strValue is found
    ' then clicks the radio button. Findelements allows you to specify a root element
    ' once the correct root row is found, FindElemets can get the correct radio button
    For Each tblRow In tbl.rows
      If tblRow.innerText = strValue Then
        Set rButton = RSWApp.om.FindElement("account", "INPUT", "NAME", , , tblRow)
         rButton.click
       End If
    Next
    End Sub
    I also uploaded the script I created. You should be able to run it and see how it works.
    This should get you going.

Maybe you are looking for