FM to update status in COR2

Hi Guru's,
I am trying to update status of Process Order(COR2) using 'status_update' FM.
The FM is returning sys-ubrc eq 0.
But when i move to COR3 the status remains unchaged.
I tried same with STATUS_CHANGE_INTERN FM , after FM i checked sy-subrc and used 'COMMIT WORK'.
Hope some one will help me!

Resolved by self.

Similar Messages

  • Update status is incorrect

    When I run update status reports, some computers show "not needed" for an update that is clearly needed. For instance, if I run a compliance report and look for the status of KB2775511, I get a lot of computers showing "Update is not required"
    - however, these computers don't have KB2775511 installed, and clearly need it.
    In fact, each client believes it needs the update because it's listed as "Missing" when I check the CCM_UpdateStatus WMI class at "root/ccm/SoftwareUpdates/UpdatesStore". Furthermore, if I deploy the update via SCCM to one of these computers,
    the computer recognizes it needs the update and installs it. So it seems that the report (or wherever the reports gets its information) is what's at fault here.
    The other odd thing I notice about the report is that the computers with incorrect statuses have very recent dates for "Last State Received", and no date for "Last State Change". This is different from computers that are correctly
    reporting their status, which have values for both, typically with older dates.
    Any idea why my reports are incorrect?
    Eric Hodges

    Hi,
    Have you checked the following log files:
    StateMessage.log(Client)
    It records details about software updates state messages that are created and sent to the management point.
    MP_Relay.log(Site system server)
    It records the transfer of files that are collected from the client.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Best way to Report on OS and Security Update Status?

    Now that our OS X roll-out is nearly complete, we need to be able to get reports on all client mMacs , their OS versions and, more specifically, their security update status.
    The "Software Difference" report seems to be falling short on showing the information we're looking for. And the "System Overview" report seems only to show straight OS and point-release level, not security update info.
    Can someone recommend a better way to get this information?

    I haven't come across a command that can show what updates have been installed, but to see a list of updates that a computer needs, try sending
    softwareupdate -l
    (that's the lower-case letter L as in "list") through the Send Unix Command (send as root). Here's the full details of the command:
    usage: softwareupdate <mode> [<args> ...]
         -l | --list          List all appropriate updates
         -d | --download          Download Only
         -i | --install          Install
              <label> ...     specific updates
              -a | --all          all appropriate updates
              -r | --recommended     only recommended updates
              -u | --url <url> ...     from signed package URLs
         Per-user preferences:
         --ignore <label> ...     Ignore specific updates
         --reset-ignored          Clear all ignored updates
         --schedule (on | off)     Set automatic checking
         -h | --help     Print this help

  • Problem in workflow process when update status of CC32 via workflow

    Hi,
    i am working on workflow support issue which is relating to CC31/CC32, here we create change number in CC31, but we won't change status of CC31 in CC32. it is possible thru workflow item only. but when 3 rd person updating status from 2 to 3, he is geting error, because the previous statuses are not updated. it's happening sometimes only not all the times. why.
    venkey

    Hello,
    What's the error? What's CC31?
    regards
    Rick Bakker
    hanabi technology

  • IPod shuffle software update status different between users

    With User 1, iTunes 7.0.2 says my 2G iPod shuffle is up to date (software version: 1.0). If I switch to User 2 and plug the same iPod shuffle into the dock, then iTunes says there's an iPod sofware update available (version 1.0.1). I decline the offer to update. Going back to User 1, no update is suggested (version 1.0 is current).
    Why does iTunes report a different software update status depending on which user is active? I don't think there's a software version 1.0.1 for the 2G iPod shuffle.
    There is no ~/Library/iTunes/iPod Software Updates/ folder for either user.
    iMac G5 (B) 20-inch   Mac OS X (10.4)   2.0 GB RAM

    I found the solution on MacOSXHints:
    http://www.macosxhints.com/article.php?story=20060912144151766
    Summary: on the Summary tab, click Restore (will pop up a confirmation dialog), then Cancel, and the Update button then indicate version 1.0.1 for User 1. Then click Update. iTunes did the update, no muss, no fuss.

  • Why I can't upload photos nor update status by iOS in iPhone 5? Are there any ways to fix this thing?

    I am using iOS 6.1.3 right now. But before I update my iOS, I was using iOS 6.0.2 but still I cannot upload any pictures via iOS in facebook also cannot update status in facebook. I am using iPhone 5.

    Go into SETTINGS and scroll down to FACEBOOK. Make sure your login and password are there. If they are, try removing them and re-adding them.

  • Set on which day of the week to receive the Update Status Summary

    Hi all,
    currently it is set to weekly, i received on Friday. Is it possible to be change this day to be different? For example Monday, or Saturday? Thanks in advance
    WSUS version 3.2.7600.226

    The weekly Update Status Summary is driven by when you originally configured the "Send status reports" option. The report will be generated on the day-of-week that you enabled the option.
    To reset (set) the desired day of week, disable the notification functionality, and then re-enable it on the day you want the report sent.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • HT4059 I cannot open some of my books I purchased. They're locked like awaiting an update. There's a blank update status bar on the books. What's wrong?

    I cannot open some of my books I purchased. They're locked like awaiting an update. There's a blank update status bar on the books. What's wrong?

    An "other" larger than about 1 1/2 GB indicates corrupted files.
    What is the Other on my iPhone and How to Remove It
    What is "Other" and What Can I Do About It?
    Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
      iTunes: Restoring iOS software

  • Publish Server Update status using IIS

    Hi, I had setup the WSUS on a 2012R2 for my server environment. My job is to approve the updates and work with server owners (eg. Application team). May I know how to publish the server update status/report using WSUS server with IIS.
    My other IT team can go to the site for checking their servers' update status and carry on the manual update job via remote desktop. Rather than remote to each of their server to check the updates been push.
    I saw this feature before when I was with my ex-company. The WSUS team will send us a link and I will use the site to sort out those server which belongs to me to verify any new updates been pushed.
    Appreciate your feedback soon.

    Hi,
    As far as I know, there is no web management UI for WSUS.
    If we want to manage the WSUS server remotely, we can install the WSUS Administration console.
    To download WSUS Administration console, please click the link below:
    http://www.microsoft.com/en-us/download/details.aspx?id=5216
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • IPhone 5 Updating Status on Facebook App crash

    Does anyone using iPhone 5 experience Facebook crashing after updating status on the Facebook app? I have FB integration on and this always happens after i update my status under News Feed. ANYONE???

    have you seen anyone with the apple logo on facebook recently? i'm asking because a simple google search will tell you that facebook is the one blocked the apple logo, or the 'posted from iphone' from showing up. now you've got me wondering.

  • Automaitc Updates through SCCM 2012 not showing up on the updates status

    Hi,
    I have configured Automatic Update rule on SCCM 2012 and it works fine but on the client machine i see this.
    This is the update status it shows which means updates are not being installed since long time.
    But when i see the update history it shows me the latest updates installed.
    Why would this happen? please suggest.
    Regards,
    Maqsood
    Maqsood Mohammed Senior Systems Engineer MCITP-Enterprise Admin & ITILv3 Foundation Certified

    Hi,
    That is as expected as the updates are installed using SCCM and not the Windows Update Agent, if you deploy a client using SCCM OSD and install software updates using SCCM and not WSUS/Windows Update it will actually say:
    "Updates were installed: Never"
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • How to update status number of KO02 transaction

    Hi Guys,
    I need to update status record of internal order (KO02 tcode).
    I have used two function modules
    ALE_INTERNALORDER_DB_CHANGE
    BAPI_INTERNALORDER_SAVEREPLICA
    Can u pls tell me which parameters need to be pass into these FMs.
    ASAP
    Thanks in advance,
    Sakti

    Anyone please response to this question.
    Thanks,
    sakti

  • IPhone4 screen frozen in update status

    Whilst loading the current,IOS 7.1.2 update, i lost/left the wifi connexion. For several hours now, the screen has
    only displayed the update status,a single line extending no further than the distinct Apple logo. Is there anything
    that can be done??

    If you scroll down a bit, there is a sort of a solution on this website: update for 7.1.2 frozen iphone 4s
    There is a direct answer on this one: Frozen iPod 5 during update IOS 7.1.2
    There is also another direct answer but by an actual apple person on this one: My phone is frozen during the ios 7.1.2 update. What should I do?
    And there is this website that may be of some use: If you can't update or restore your iOS device

  • CCMS - Monitor SM13 - Update status

    Hi Guys,
    How do I monitor the Sm13 -> Update Status with ccms ?
    Kind regards,
    Dimitry

    Hi Artem,
    The update MTE monitors the updates, if something fails I get autoreaction. What I'm searching for is the Update Status that is displays in SM13.
    Any idea ?
    Dimitry

  • XMLP Bursting program - Update status after bursting

    Hi,
    I have a xmlp bursting report.
    The requirement is to email POs. Once emailed, I need to update the status back, so that duplicate emails arent sent.
    So the logic incorporated is:
    1. Generate xml data
    2. call bursting program
    3. wait for step2 to complete, update the status in po tables, from bursting status report
    Here I have used a plsql executable, which will do all of the above.
    But after step1, when bursting program is submitted, since my main program waits for bursting report to complete, bursting program errors out saying step1 out file is not accessible. I think its locked.
    So I cant have step3 logic in my wrapper plsql executable.
    PLSQL executable can have step1 and 2 only.
    Please share some ideas on how can I have step3?
    How can I release lock on my main program when bursting program is submitted(so that it doesnt fail) if I include step3 in wrapper plsql.
    Thanks in advance.

    Hi ,
    Have you tried by setting the temp Dir?
    XMLP----->Administration---->General---->Temp Dir
    Rgds,

Maybe you are looking for

  • Computer not responding to video invitation

    I have just purchased an iSight, am on a wireless broadband connection, and the camera works fine for preview on iChat. However when I am invited or invite another iChat user with iSight for video or audio chat, my screen says it is "starting" the vi

  • Error when scheduling a test

    Hello, I have been trying to schedule a certification test through Prometric since last Friday (04 sep.), but I keep getting an error page ("Page Cannot Be Displayed") right after confirming the billing information (credit card number, etc.). After t

  • ITunes match, disappearing library

    HELP!  I'd like to know how to restore my library, before iTunes Match. I had almost 1000 songs in my library (some added from CD or albums), and now only the ones purchased through iTunes appear in the library.  All my playlists are gone, as well. 

  • ICal crashes when you have Google Calendars

    I have Google Calendar in iCal and it crashes whenever I open it after a second or two. I have found another post where crashing was solved by removing and adding the Google Calendar, but I don't have enough time to remove it when iCal starts. It dis

  • WCS 7.0 migration to Prime?

    We will upgrade the WLC from 7.0 to 7.3 to support HA, but looks like WCS does not support 7.3 code any more. We have lobby account on WCS to create the guest account for WLC. We then have to transfer WCS to another product-Prime. My question is is t