FMCore has stopped
So a while ago I decided to try out Suitcase Fusion but later on decided I didn't need it after all. However, whenever I start up any design program on my Mac, a notification pops up saying that FMCore has stopped. I've looked this up several times and can only seem to find a solution for people who are using SF at the time. So I don't have SF and can't stop the alert. What can I do to make this annoying little box go away? Can anyone point me in the right direction with this? Thanks.
Go to the Extensis web site and look around there. They at one time had a fix posted for this problem.
http://www.extensis.com/en/support/kb_article.jsp?articleNumber=8501204
Similar Messages
-
Message - FMCore has been stopped.
I cannot start InDesign, I get this message. It says: "FMCore has been stopped. Please start it from the Preferences pane and then relaunch...
I don't understand why I am suddenly having so many InDesign issues.This is a problem with Suitcase. See these threads: http://forums.adobe.com/search.jspa?communityID=3359&communityID=3331&communityID=3274&res ultTypes=MESSAGE&q=FMCore+has+been+stopped
-
I receive an alert message when opening Illustrator CS3. The alert message is:
"FMCore has been stopped. Please start it from the System Preferences pane and then relaunch Adobe Indesign CS3."
I know this was a problem with suitcase fusion and i could turn it back on in system preferences but i have since uninstalled suticase fusion and the message keeps appearing.
Can anyone advise me on what I could/should do from here? I appreciate any help you might offer.Ok so i re installed suitcase fusion 2 and turned on the core but frustratingly indesign still says the fm core has stopped, i think the problem is i may have reinstalled suticase fusion in a different place where indesign doesn't know where it is. Or it might have something to do with the font faut, if you go to the system preferences and click on suitcase fusion at the bottom of the window it gives the font vault location, on mines its at:
/Users/StuartHamilton/Library/Extensis/Suitcase Fusion/Suitcase Fusion.fontvault
Is this right? Where is it on you computer? -
I use windows vista and I have upgraded my itunes. Now when I open it, it gives me a message saying "itunes has stopped working" and then gives me a message saying it will notify me for a solution. What can I do to fix this so it can open and not give me any more problems???
First you can try;
Try restarting PC and run itunes again!
If error again than perform clean instal of itunes (uninstal first and than instal again)! -
AdapterDeviceID: 0x9712
AdapterDriverVersion: 8.861.1.2000
AdapterSubsysID: 164c103c
AdapterVendorID: 0x1002
Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:33.1.1
AvailablePageFile: 13967405056
AvailablePhysicalMemory: 6222434304
AvailableVirtualMemory: 3783245824
BIOS_Manufacturer: Hewlett-Packard
BlockedDllList:
BreakpadReserveAddress: 46661632
BreakpadReserveSize: 41943040
BuildID: 20141113143407
CrashTime: 1417153956
EMCheckCompatibility: true
EventLoopNestingLevel: 1
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1416895140
Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x9712, AdapterSubsysID: 164c103c, AdapterDriverVersion: 8.861.1.2000
D2D? D2D+ DWrite? DWrite+ D3D11 Layers? D3D11 Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 175
StartupTime: 1417153798
SystemMemoryUsePercentage: 25
Theme: classic/1.0
Throttleable: 1
TotalPageFile: 16630353920
TotalPhysicalMemory: 8316153856
TotalVirtualMemory: 4294836224
URL: https://support.mozilla.org/en-US/questions/new/desktop/fix-problems/form?search=mozalloc.dll&step=aaq-question
Vendor: Mozilla
Version: 33.1.1
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IP] : 2 : 2 :
MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
MSAFD Tcpip [UDP/IPv6] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IPv6] : 2 : 3 :
RSVP TCPv6 Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP TCP Service Provider : 2 : 1 :
RSVP UDPv6 Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
RSVP UDP Service Provider : 2 : 2 :
useragent_locale: en-US
This report also contains technical information about the state of the application when it crashed.
AND:
A plugin container for firefox has stopped working.
Problem signature:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 33.1.1.5430
Application Timestamp: 54656826
Fault Module Name: mozalloc.dll
Fault Module Version: 33.1.1.5430
Fault Module Timestamp: 54654321
Exception Code: 80000003
Exception Offset: 00001425
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]
-
I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded. When I click on the iTunes Store Box, Nothing happens except for a message that reads:
iTunes has stopped working.
The following items give me a choice, but no answer comes up. The computer will shut down the website.
"Check online for a solution and close the program"
"Close the program."
There is an item below the box that is selectable for View problem details. When clicked a long list of items show up. I have listed some of the problems as written, but I do not understand them. I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version. How can we go back and download an earlier version of iTunes?
Here are some of the Problem Details:
"Problem signature: APPCRASH
Application Name: iTunes.exe
Application Version: 11.0.1.12
Application Timestamp: 50c8fc7e"I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony -
When I click on the itunes shortcut or the program I get the following message:
ITunes has stopped working. My two options are: Windows can check on line for a solution to the problem or close the program.
It seems that my entire library is not there. If I sync my ipod will it add it back into my library on the computer?
I've even tried installing again and nothing works. Tried the "repair" and it says that ITunes is loaded but I stil get the above error when I try to open the program.
ThanksLet's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?
Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
ITunes 10.3.1 has stopped working in Windows 7 64bit
I just upgraded to Windows 7 64 bit and I downloaded iTunes 10.3.1 for Windows 7 64 bit. My Quicktime player is working fine but everytime i tried to open iTunes, it gives me an error message that says iTunes has stopped working. I need help trying to fix this, I already tried uninstalling, re-installing, and mostly every suggestion in the Apple support forum and it still does not work.
This is the information I have on the Problem Details:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.3.1.55
Application Timestamp: 4deec351
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 00000000
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789Try copying the QTMovieWin.dll in the c:\program files (x86)\common files\apple\apple application support folder to the c:\program files (x86)\iTunes folder. I had same problem and it's fixed this bug.
-
ITunes has stopped working ...Running Windows 7(64)
I upgraded my home PC Desktop to Windows 7 earlier this year and had no trouble bringing over iTunes from my previous platform (Windows XP).
I recently returned home to the US from a work assignment out of the country and because my iTunes resides on my home PC desktop, I didn't open up iTunes for the past 6 weeks. During this time Apple released iTunes 10.5. When I returned home, the old version of iTunes was still working. However, when I upgraded to iTunes 10.5, iTunes stopped working. The error message: "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I have worked through the following knowlege bulletins (nothing has fixed my problem):
(a)" iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues"
(b) "iTunes: Troubleshooting issues with third-party iTunes plug-ins"
(c) "iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio"
(d) "Removing and reinstalling iTunes, QuickTime, and other software components for Windows vista or Windows 7"
(e) "iTunes for Windows: system restarts, blue screen, or quits unexpectedly when accessing iTunes Store"
the last bulletin (e), recommended ensuring that my drivers were up-to-date. So I also updated my drivers.
Lastly, I contacted iTunes Store Customer Support (although my problem isn't with the store, it is upgraded iTunes running on windows 7). They told me the issue was "outside (their) expertise" and recommended I look at this discussion board.
Here is the information I found under Event Viewer:
==================================================================
Log Name: Application
Source: Application Error
Date: 11/27/2011 11:46:01 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Theresa-HP
Description:
Faulting application name: iTunes.exe, version: 10.5.1.42, time stamp: 0x4ebf7d7c
Faulting module name: MSVCR80.dll, version: 8.0.50727.6195, time stamp: 0x4dcddbf3
Exception code: 0xc000000d
Fault offset: 0x00026b72
Faulting process id: 0x13b0
Faulting application start time: 0x01ccad3d27f6b2ff
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d 09154e044272b9a\MSVCR80.dll
Report Id: 6ef58025-1930-11e1-a798-e06995d0a503
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-11-27T19:46:01.000000000Z" />
<EventRecordID>9927</EventRecordID>
<Channel>Application</Channel>
<Computer>Theresa-HP</Computer>
<Security />
</System>
<EventData>
<Data>iTunes.exe</Data>
<Data>10.5.1.42</Data>
<Data>4ebf7d7c</Data>
<Data>MSVCR80.dll</Data>
<Data>8.0.50727.6195</Data>
<Data>4dcddbf3</Data>
<Data>c000000d</Data>
<Data>00026b72</Data>
<Data>13b0</Data>
<Data>01ccad3d27f6b2ff</Data>
<Data>C:\Program Files (x86)\iTunes\iTunes.exe</Data>
<Data>C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_ none_d09154e044272b9a\MSVCR80.dll</Data>
<Data>6ef58025-1930-11e1-a798-e06995d0a503</Data>
</EventData>
</Event>
==================================================================
It seems that I am not alone in having this problem! Are there any experts out there who want to earn the undying gratitude of the technically challenged (or a few expert points?)
Thanks for listening,
Theresa
PS - someone recommended uninstalling Apple Quick Time Player. I don't have Quick Time Player.I had the same problem. I'm using 64bit Windows7. This solution only partially worked for me. I still couldn't connect to the iTunes store.
The following solution worked for me:
COPY QTMovieWin.dll
FROM c:\program files (x86)\common files\apple\apple application support\
INTO c:\program files (x86)/iTunes -
I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks
sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone. -
I've had Adobe Acrobat XI Pro for some time, but yesterday it stopped working and I started having an 'Adobe Acrobat has stopped working' error. It then tells me to Close the Program.
How do I resolve this?
Thanks and regards
RoxanneThanks Pat. I was able to resolve the problem.
OS is Windows 7 Pro, Adobe Acrobat Pro 11.0.07.
I went into the Properties file where I identified that Users only had Read & Execute and Read properties, I changed properties for Everyone to Full Control. That fixed the problem.
I don't know how the properties got changed to just Read & Execute, but there had been an automatic update the night before.
Regards
Roxanne -
Adobe Bridge CC has stopped working -again
After many months of pain caused by Bridge CC not working it seemed to be cleared up in Sept '14. (I used just about every fix that was suggested incl. preferences changed to have no program load on startup, managing cache, etc.) I has been working flawlessly until today. My pc notified re: windows updates were ready to install. I cleaned my pc, closed all programs and installed 23 updates. (Win7, 64bit) Updates seemed to install cleanly but Bridge CC will not open and displays a white screen and the msg "Adobe Bridge CC has stopped working" This began immediately after the os updates were installed so I suspected that was the issue. I restored the pc to before the updates and CC will still not open (stopped) and in desperation I tried Bridge CS6. CS6 opened normally and I was able to open a folder. Touching the space bar should have opened the selected file to full screen image but instead I got the same error msg now saying Adobe Bridge CS6 has stopped working. I have the same programs on my laptop and CC opens and works properly. So that sounds like my pc and not Bridge is the problem but there is an incompatibility somewhere and I am stuck and my work is piling up as I speak. I need my bridge back!
This problem has been solved by Microsoft, rebuilt Win7. I would like to delete my question to reduce clutter here but I don't know how to delete it. A moderator may delete this if they wish or someone can add to my reply and instruct me. Thanks!
-
"Adobe Bridge has stopped working"
Just installed CS2 Version 9.0. Having "Adobe Bridge has stopped working" Windows 7 Pro 64. Is there a solution to this problem?
Thanks?Curt,
Thanks for getting back to me.
Bridge had worked before. When I refer to BRIDGE I mean that I go to a
folder of photos in PS and select file/browse to open. This feature
does work with other folders of photos. It was when I downloaded photos
from my cell phone into a folder and in PS went to file/browse the
browser will open and then I get a message "Adobe Bridge has stopped
working."
I can still go to another photo folder in PS and select file/browse and
it will work, the problem is with the photos from my cell photo.
Do you have any ideas.
I have the latest versions of PS.
Thanks,
Jack -
Adobe Bridge CS6 has stopped working - has issue been resolved?
Hello.
I am experiencing the above problem with a new install of CS6.
Has this issue been resolved?
CS6 Design and Web Premium installed on Win 7 pro 64 bit Dell Precision laptop. Error with Adobe Bridge cs6: "Adobe Bridge CS6 has stopped working", problem event name "APPCRASH". Error occurs when opening Bridge from Photoshop and other apps (Browse in Bridge) and directly from desktop or start menu. Also a cache directory is not being created under c:\user\<user>\appdata\roaming\adobe\bridge\. Holding ctrl key down and double clicking icon gets same message, cannot get at reset window.
Performed the following with no change: verified Bridge and full suite is on latest version (Bridge=5.0.2.4); created desktop icon directly from bridge.exe; verified application was installed and is starting with administrator privileges; verified latest display driver installed; performed complete uninstall of CS6, CC cleaner tool run, then full reinstall; Error under Event Viewer: faulting application: Bridge.exe and faulting module name: ntdll.dll; disabled UAC; tested memory for damage using MemTest86-good.
Thanks for any help you can provide.A follow up to the above.
There appears to be a number of possible causes for this type of error. In my case it was somewhat specific. I had a stand alone copy on this same machine previously of Adobe Photoshop CS2 (only) which was completely uninstalled prior to the installation of CS6. There is an issue with Bridge CS6 being installed on a machine that has Bridge CS2 on it. I wasn't aware of Bridge being present with my copy of Photoshop CS2 but apparently there were at least some components of Bridge CS2 left after the uninstall. The workaround that solved the issue for me was the creation of an empty folder:
C:\Users\[your user name]\AppData\Roaming\Adobe\Bridge CS2
For those of you who may have this situation.
Here is where I found the solution (sixth thread down):
Bridge CS6 won't open running on Win7
Maybe you are looking for
-
Process not available in bpel console after deploying it
Hi All, I am following note 459640.1. In step 5-j It asks to deploy the bpel processes using the following command line: obant -buildfile WshJarBuild.xml -DnewOtmURL=<OTM SERVER URL> -DbpelHome=<BPEL HOME DIR> [-DnewDbConnName=<DB CONNECTION NAME>] [
-
Media on new external hard drive causing problems with FCP 4.1
Hi gang I bought a new 160 gig external hard drive due to my internal media drives becoming fairly full of media (20 gigs left on each). The external is being used only for media. I removed ownership permissions on all the media drives but now when I
-
Different ways to turn off the Blackberry 8330
ok..maybe this is a silly question...I know how to turn off the blackberry on the main page but how do you turn the blackberry off from the second page like some people do....as in the page that shows yahoo, facebook,address book,etc. and when it is
-
Hi Guys, We have an iMac (10.6.6, 3.06Ghz i3, 4 gig ram) It has Acrobat 7 and 8 installed. We initally just had 7 installed for bookmarking PDFs. Everything it does works great expect for when we go to do the Automatic bookmarking command+B it crashe
-
[XSLT] No support for XSD substitutionGroup functionality?
I'm getting started with BPEL Process Manager and am currently exploring the functionalities of BPEL JDeveloper. One thing I'm trying to do is see if it has the same capabilities as TIBCO's messagebroker. Although it looked very promising I ran into