FMLE CPU almost 100%?

Hi everyone, Please I need help. I use flash media live encoder to livestream at our church and I get almost 100% CPU usage. I dont have any other programs running just flash media live encoder and as soon as i press to start streaming, CPU usages jumps all the way up.  
Below is my equipment I use
AMD Athlon II X4 640 Quad Core 3.0GHz CPU
MSI 970A-G46 AM3+ AMD 970 + SB950 Motherboard
G.SKILL Ripjaws Series 8GB 240-Pin DDR3 SDRAM DDR3 1600 RAM
EVGA 02G-P4-3658-KR GeFrce GTX 650 Ti 2GB 192-bit GDDR5 Video Card
Windows 7 Ultimate x64 OS
So I have 3 cameras I use and those cameras go into my ATEM TVS via HDMI or SDI. from ATEM TVS it goes to a PCI capture card. I've tried using
Blackmagic Design Intensity Pro
AVERMEDIA Game Broadcaster HD
AVerMedia Game Recorder -C985
All Three of these capture cards (same result)
I want to be able to stream HD quality 720-1080p at least that is what my streaming provider is telling me I should be able to do.  so my settings are as follows. input is 1920 by 1080. output is 1280 by 720. Pretty reasonable. No matter what card I choose my settings are for H265 30fps I've tried all types of frames. and tried all times of bit rates. from 150 to 2000 kbps.  always running at very high CPU. Please help me out. Thanks all

I Remember, that was a problem with 100% CPU for 10.1, 10.2 database by LISTENER
Need to rename $ORACLE_HOME/opmn/ons.conf to something else.
and restart listener.
It's may be useful if you installed OEM with database on the same server. Or problem can be anywhere else.

Similar Messages

  • Fontd and PS take me almost 100% CPU

    When I am using font function in Photoshop, fontd and PS take me almost 100% CPU!!
    How can i solve this?

    Captain Ibuprofen, we actually continued having the slowness problem in the past week. Then one of our developers found out the reason: as same as yours, caused by the page number widget. I wish we would have seen your response earlier. But yeah, so now we took out the page number widget and everything goes normal.
    Also thanks for the tips on using the cpInfoCurrentSlide variable when adding the slide number. Thanks Andy.

  • Firefox using almost 100% CPU - hogging resources - hanging

    After several hours of operating Firefox starts using almost 100% CPU - with peaks of 100% occurring in rapid succession - FF hangs until CPU useage drops below 100%
    Followed recommended troubleshooting as recommended on this site:
    * Started in Safe mode - no problems occurred.
    * Disabled all extensions; Plug-ins left operating.
    * No replication of problems.
    * Enable 1/2 of extensions up to Flashblock - restarted - seems ok
    * Enable most remaining extensions
    * (There are 3 Java extesnions - only enabling one) - again seems ok
    * Some hours later - problem reoccurred. Each time CPU useage peaked at 100% (according to Task Manager) the Firefox Window flickered & was unresponsive.
    * Deleted cache - no change
    * Disabled recently added programs - no change
    FF opens and closes normally & completely. '''Problem only seems to occur after FF has been operating for some time'''
    This has occurred intermittantly before but has become chronic over the last few days. Apologies if I've been repetitive or explained poorly - FF has hung several times while typing this.

    No issue for me, after 4 loops my CPU load was around 18%.
    Firefox 33.1.1 under Windows Vista.

  • Process: "kernel_task" taking up almost 100% of CPU

    A few hours ago, I noticed my MBP start hanging and generally processing very slow. Apps would freeze at random times, and generally a lot of odd behavior.
    I checked the activity monitor to see what might be causing this. It turns out, the process "kernel_task" is using almost 100% of my CPU. It has stayed within the 70-100% range, and has yet to go down. I tried many things, including restarting my Mac many times, but it remains the same.
    Does anyone know why "kernel_task" is taking up so much of my CPU? Is there a way to somehow "reset" the process to get it back to normal? Any help would be much appreciated, since my Mac is, for just about all purposes, useless right now. It took me about an hour just to get to this page and type this message.
    Thanks in advance!
    P.S. I attached a screenshot of the process in the Activity Monitor. You can view it here: http://images12.fotki.com/v203/filejMEm/9ae47/8/1659168/8691947/kernel_task.png

    I just want to add that I think the "kernel_task" might have started eating CPU when I stopped a RAR program in the middle of extracting an archive. I'm not 100% sure though that this is when the problem started.

  • CPU Running 100%

    Since upgrading to Lion, my CPU is now running at almost 100% all the time.
    Many thanks

    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.

  • Kext cache running CPU at 100%

    This has happened a few times now since upgrading to leopard. I just finished using Software Update to install a couple of things (no reboot required), after which I noticed the system running fast. Launched Activity Monitor to see that something called 'kextcache' using almost 100% CPU. I don't know what this is or why it suddenly feels the need to hog my system resources, but I have to force quit it in order to bring things under control again (doesn't seem to affect anything when I do). Can anyone tell me what this is, why it should be doing what it's doing, and how I can stop having to force quit it?

    A brief summary from the man page for kextcache:
    The kextcache program creates or updates kext caches, which are used to speed up kext loading operations and to prepare kexts for inclusion in such media as device ROM. It is invoked automat-ically as needed to rebuild the system caches, and can be used manually to build kext archives to be stored in device ROM.
    Something isn't quite right. Open the Console.app and look for error messages in the system.log involving kextcache. If you post them someone might have an answer.

  • Oracle Database 11.2.0.1.0 CPU hit 100% on Windows 2008 R2 64 bit Hyper-V

    Oracle Environment Detail:
    Oracle Database Enterprise Edition :11.2.0.1.0 (NON RAC, No failsafe)
    O/S:     Windows 2008 R2 64 bit (6.1)
    Specifics: Virtual Server using Hyper-V
    Memory: 9 GB RAM
    Processor: E5540
    Specific about the issue:
    I have two database instance created on this server with ‘memory_target=3600M’ each.
    I am getting into an issue where I find NO activity on database except regular schedule job running using DBMS_SCHEDULER –
    •     Database FULL export DAILY schedule time 7 & 7:30 PM accordingly for both instance (takes about 15-20 mins each)
    •     Database FULL RMAN DAILY schedule time 9 & 10 PM accordingly for both instance (takes about 35-40 mins each)
    This was set up on Feb 25th 2011. Since then we have encounter CPU hit 100% TWICE in this system at around 8:30 PM (SAME TIME). Both database instance exports keep running and never finish. While RMAN schedule job has NO problem. Mostly everything runs every smoothly without any issue.
    Replicate the issue:
    I am unable to replicate this issue and do not know the cause of the issue.
    Work Around:
    Oracle services shutdown/Server reboot.
    Would anyone know about this issue? Have any information could help? This system will become production soon and want to make sure we have solution for this.
    Thanks in advance!

    I am finding that CPU hit 100% is very specific to Oracle 11.2.0.1.0 Export Utility (exp) used to take FULL database export. I understand Original Export is desupported from general use as of 11g but available for specific need.
    Have anyone faced this issue with 11.2.0.1.0 Export Utility (exp)? Please help.
    I have a need to use export utility which gives us migration options.
    Thanks!

  • XP mode on Win7 Pro x64, windows xp update/svchost pushes CPU to 100% in virtual machine.

    Installed xp mode on a win7 pro, dell 490 with xeon cpu. The install goes without error, win xp virtual machine loads nicely, I do not enable updates at the config during 1st startup. When Automatic update is enabled later control panel shows svchost is
    pushing the cpu to 100% and the update never completes.

    Hi,
    1. try to run XP in safe mode by F8
    2. then change Automatic update service to Manual or Disable.
    3.boot XP into normal mode and see weather its still 100%.
    thanks
    How do you start safe mode when running XP Mode in Win 7?  When you start XP Mode, the BIOS is hidden.  By the time the XP Mode window comes up, its already loading the Windows desktop.

  • Xine fullscreen CPU at 100%

    Hi,
    When i watch a movie or myepisodes my xine races my cpu to 100%.
    I have tried other video drivers in xine but nontheless.
    Some info you guys might need:
    - WM: Openbox
    - Dual Monitor Setup whit following screens:
      a. Samsung Syncmaster 940nw
      b. Neovo F-419
    lspci -v
    02:00.0 VGA Compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
    Xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    Option "BlankTime" "0"
    Option "StandbyTime" "0"
    Option "SuspendTime" "0"
    Option "OffTime" "0"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    Load "extmod"
    Load "record"
    Load "dri2"
    Load "dbe"
    Load "dri"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    #DisplaySize 410 260 # mm
    Identifier "Monitor0"
    VendorName "SAM"
    ModelName "SyncMaster"
    HorizSync 30.0 - 81.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    Option "PreferredMode" "1440x900"
    Option "Primary" "True"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "AGNeovo"
    ModelName "F-419"
    HorizSync 24-80
    VertRefresh 49-75
    Option "DMPS"
    Option "LeftOf" "Monitor0"
    Option "PreferredMode" "1280x1024"
    Option "Primary" "False"
    EndSection
    Section "Device"
    Identifier "RV100"
    Driver "radeon"
    BusID "PCI:2:0:0"
    Option "Monitor-VGA-0" "Monitor0"
    Option "Monitor-DVI-0" "Monitor1"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "syncm"
    SubSection "Display"
    Modes "1280x1024" "1440x900"
    Depth 24
    Virtual 2720 1024
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    xrandr
    Screen 0: minimum 320 x 200, current 2720 x 1024, maximum 4096 x 4096
    VGA-0 connected 1440x900+1280+0 (normal left inverted right x axis y axis) 410mm x 257mm
    1440x900 59.9*+ 75.0
    1280x1024 75.0 60.0
    1280x960 60.0
    1152x864 75.0
    1024x768 75.1 70.1 60.0
    832x624 74.6
    800x600 72.2 75.0 60.3 56.2
    640x480 72.8 75.0 66.7 60.0
    720x400 70.1
    DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 375mm x 301mm
    1280x1024 60.0*+ 75.0
    1024x768 75.1 70.1 60.0
    832x624 74.6
    800x600 72.2 75.0 60.3 56.2
    640x480 72.8 75.0 66.7 60.0
    720x400 70.1
    S-video disconnected (normal left inverted right x axis y axis)
    I hope this is enough to go on.

    Not sure if it supports it i've seen ubuntu forums use them and they worked. Not sure if this counts.
    Just made this linux box 2 weeks ago it has happend since the start.
    Wel cat /proc/cpuinfo gives me:
    redostrike ~ $ cat /proc/cpuinfo
    processor : 0
    vendor_id : GenuineIntel
    cpu family : 15
    model : 2
    model name : Intel(R) Pentium(R) 4 CPU 2.00GHz
    stepping : 4
    cpu MHz : 1992.410
    cache size : 512 KB
    fdiv_bug : no
    hlt_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 2
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm up pebs bts
    bogomips : 3986.85
    clflush size : 64
    cache_alignment : 128
    address sizes : 36 bits physical, 32 bits virtual
    power management:
    Not the best one out there but still it should run good.
    vlc, mplayer are even worse the have lots of lags. Havent tried gstreamer yet will look into that.
    I've been tweaking my xorg.conf a bit and now i can get a larger screen out of it but the cpu still goes to 100%.
    This is the Device section now.
    Section "Device"
    Identifier "ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]"
    Driver "radeon"
    Option "ColorTiling" "On"
    Option "EnablePageFlip" "On"
    Option "DisplayPriority" "BIOS"
    Option "RenderAccel" "On"
    Option "AccelMethod" "XAA"
    Option "XAANoOffScreenPixMaps"
    Option "AGPMode" "8"
    BusID "PCI:2:0:0"
    Option "Monitor-VGA-0" "Monitor0"
    Option "Monitor-DVI-0" "Monitor1"
    EndSection

  • TS1717 I can't access Itunes Store via my Itunes. When Itunes start, CPU always 100%, I've tried uninstall and reinstall Itunes but it seems to be useless. Please help !!!

    I can't access Itunes Store via my Itunes. When Itunes start, CPU always 100%, I've tried uninstall and reinstall Itunes but it seems to be useless. Please help !!!

    I can't access Itunes Store via my Itunes.
    Is iTunes endlessly saying "Accessing iTunes Store"? Or is something a bit different going on?

  • Evenlog viewing causes CPU usage 100% on Windows server 2008 SP2

    We have Windows server 2008 SP2 with strange behaviour. When I scroll down events in eventlog viewer CPU usage hits 100% and eventlog viewer freeze. CPU usage is split between 2 processes SVCHOST.EXE (lmhosts, eventlog and Dhcp services) and MMC.EXE.
    1)I tried to replace eventlog files with new ones. That didn’t helped
    2)After server clean boot problem still exist.
    3)When CPU hits 100% usage process explorer shows that from SVCHOST.EXE process CPU is used by service EventLog.
    Any ideas how to fix this?

    Hi Santosh
    I re-installed VMware
    tools and also configured VMXNET 3 - nothing changed :(
    Sorry to hear that.
    Windows event log service has couple of dependencies i.e. task scheduler and windows event collector service. Can try restrating those services ?
    In addition to above, try following steps
    Change NTFS permission of  %WINDIR%\System32\WinEvt\Logs directory, add Local Service and
    Network Service, give them FULL permissions.
    Stop and Start event viewer service by running following command
    net stop eventlog && net start eventlog
    Issues like this might occur if the disk (FC or iSCSI SAN or even NAS) has some inconsistencies , this is true in case of both physical and virtual machines 
    You might want to try running chkdisk as well on the server in question
    http://technet.microsoft.com/en-us/library/cc730714(v=ws.10).aspx
    If nothing helps, try inplace upgrade of the Operating system as an last option.
    How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
    http://support.microsoft.com/kb/2255099
    Thanks
    Regards, Santosh
    I do not represent the organisation I work for, all the opinions expressed here are my own.
    This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
    Whenever you see a helpful reply, click on Vote As Helpful & click on
    Mark As Answer if a post answers your question.

  • Flash player 11 is very glitchy on ALL browsers and makes my CPU usage 100%,Streaming media headache

    flash player 11 is very glitchy on ALL browsers and makes my CPU usage 100%, making all youtube and pandora or any streaming media a headache, i have a low-end but good quality Emachine with Windows 7 Sv pk. 1, AMD Athalon Processor 2650e 1.6 GHz 2GB ram 32-bit, which isn't that bad, it used to play HD videos and everything without a skip or lag, it is virus clean, and clean of any large bulky programs, the only thing that went wrong was the fact that the adobe flash updates slowly but surely made it worse, AND it will not let me roll-back to an older version anymore like it used to, so WTF is up? no one seems to have an answer for this, and it seems like ADOBE is doing everything in it's power to not let me ask this question or get it solved, maybe it's because I AM TOO SMART FOR IT AND KNOW IT'S A FAILURE. so please, anyone who actually has a degree in this field is welcome, but no BS anymore, i want answers.
    [moved to Flash Player forum]
    Message was edited by: sinious

    The jump to FP11 was pretty significant with Stage3D. Now Flash Player has a lower level access to your computers GPU to offload playing video and 3d rendering to the GPU. However if your systems GPU isn't up to the task you really won't see that performance gain.
    Enter H264 video decoding. A large segment of the Flash usage market is simply viewing video. For sites without fallback in mind (or don't mind software rendering fallback), video may suffer. Using the GPU accelerated video classes may make it difficult for your system to view playback. Disabling hardware acceleration as recommended above would revert you back to software (CPU) decoding to check if your system itself is the issue (and not all the new GPU additions). You did that yet you're still having an issue.
    Just to clarify, as I have an eMachine (for accounting), your computer is very much in the "budget" margin. You have a 3 year old single core 1.6ghz AM2 CPU with 512kb of L2. That's the K8 series. This is a very underpowered, single thread loving CPU. Only the most optimized Flash sites and lower end videos (720p or below) should play, but I'm not even sure if they'll "play well". It depends on your GPU.
    Also you should know they have an official list of unsupported chipsets and drivers based on many factors. Here's a list for FP11 and AIR3:
    http://helpx.adobe.com/x-productkb/multi/stage3d-unsupported-chipsets-drivers-flash.html
    Check the bottom of the screen to see what Flash is reporting your rendering mode is. For example, mine states:
    Your gpu supports Stage3D in both Baseline and Constrained profile!
    Baseline RenderMode:
    DirectX9
    Constrained RenderMode:
    DirectX9 (Baseline Constrained)
    This probably won't get better in the future for you. Flash is not a low end multimedia runtime. It does require and utilize high end hardware in a much more reliable way.

  • Problem - Playing media stops when CPU reaches 100%

    Hi,
    I have a big problem, I use JMF for playing my videos and music for my video game.
    But if the CPU reaches 100 % the playing media stops and if the Processor is in the state less as 100% it continues playing.
    But windows media player continues playing for some seconds after reaching 100%.
    Would it help to increase the Buffer with BufferControl or is this a problem for Java?

    You can't really compare JMF to the windows media player because your java app is undoubtedly doing other things at the same time as it's playing your music and videos. Win media player just has to worry about playing the video/music

  • X200 CPU reaches 100 celsius degrees. is this normal?

    I'm using LenovoThinkVantage Toolbox to do a CPU stress test and and the same time I'm running TPFanControl to monitor the speed of the fan and the temperature of the CPU.
    When I run the CPU stress test the temperature of the CPU reaches 100 degrees celcius with the fan going at 7000rpms which all of it sounds excessive and not right to me. Is this normal? or there is something wrong with my system.
    Thanks in advance

    100C is around the maximum the CPU can deal with before sustaining damage.  Even then, running at that temperature for extended periods of time is most certainly going to be problematic.
    I can't imagine it was designed to be run that way, so I'm guessing there's a problem.  Maybe a heatsink is not seated properly, or something is obstructing airflow.  Either way, I'd say that if you're under warranty it's worth having the depot take a look.

  • ASA 5545 NIPS CPU utilization 100%

    Hi,
    We are having two pair of NIPS SSP and working in Active and standby mode.
    All four Devices (ASA 5545 and ASA 5525 SSP IPS) showing CPU utilization 100% on both active and standby devices.
    Memory usage is also showing very highly utilized.
    Kindly help me resovle this issue.
    Regards,
    Dheeraj

    Hi Dheeraj,
    I don't think this is an issue. CPU 100% utilization is reported on every IPS (appliance or ASA software module) and it should be normal.
    If you want to see if your device is getting more traffic than it can process, you should look at inspection load.
    I hope this will help and it would be nice if someone from Cisco team could reply to this.

Maybe you are looking for