FMW11G and the registry option in ADF BC SDO service adapter

Hi
I got the ADF-BC SDO web service succesfull deployed on the soa server and it works . now I want to use this as reference in the coistmposite . this works but
when I want to test it then it gives me a registry error.
Wat does this option in ADF-BC SDO and what is the right value.
thanks

Hi
I am still getting this error calling an ADF BC from my SOA composite, using 11.1.1.4:
"Could not find registry for ROLES-WF#V2.0_JBOServiceRegistry"
where "ROLES-WF#V2.0" has come from my Weblogic config.xml.
I find this in the JDeveloper help:
"Before you can deploy an ADF Business Components service and invoke the service from a BPEL process in a SOA composite application, the ADF Business Components service has to be registered in the composite:
1. Edit the weblogic-application.xml file to configure the WebLogic application deployment listener to invoke the ServiceRegistry logic.
2. In the Registry field, use applicationName_JBOServiceRegistry as the registry name (as described above)."
Does anybody know how to do Step 1?
cheers
Lewis

Similar Messages

Errors "Load tModels into the registry" option & publishing proxy services

Hi,
I'm making a study with BEA Aqualogic Service Bus and BEA Aqualogic Service Registry.
Reading official documentation (Console Help), I added with the BEA ALSB Console two registries. But during the configuration it doesn't allow me to set the *"Load tModels into the registry"* option, in fact when I click "Save" I get this error:
*"Permission to generate key uddi:bea.com:servicebus:servicetype denied".*
However I added two registries without setting this option.
Now, when I want to publish a proxy service (in any registry), following the official procedure, I get this error:
*"The publish completed with error. One or more services can't be published correctly, please see the detailed error messages in the summary table".*
*"CannotCreate The key uddi:bea.com:servicebus:properties does not represent a valid taxonomy!"*
I don't think it's all right! :)
Someone can help me?

Thank you for your help (even though you didn't know you were helping). I am also studying ALSB and ALSR, and I had the same problem when I tried to publish a proxy service ("... does not represent a valid taxonomy"). Based on your experience, I updated my registry in ALSB and checked "Load tModels". This was successful. I then published my proxy service and this too was successful.
So the help you've given me was to suggest that publishing proxy services cannot be done unless the BEA tModels are first loaded into the registry.
This means that your real problem is that you can't load the tModels. To do this, I suggest that the user ID you give when you're setting up the registry in ALSB must be an administrative user. When you installed the ALSR, an administrative account was created. Try giving this account information to the ALSB.
If you don't want to give the administrative ID and password, you must set up an account in ALSR that has the ability to create tModels. In the ALSR's console page (probably at http://localhost:7001/registry/uddi/web), look at the administrative account's permissions (you'll find it on the "Manage" tab, under "Permissions"--you won't see the "Manage" tab unless you log in as an administrator). In my system, the administrator account has four permissions; I would guess that the one you need is "org.systinet.uddi.security.permission.ConfigurationManagerPermission".

My iPhone will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings. I have no back up of my phone I've also tried the home/sleep button thing but nothing

My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

To prevent others from reading your mail, don't give them access to your account. If others need to use your computer for some reason, set up personal accounts, or a guest account, and switch to it before allowing them access. This is the simplest, and most effective, method.
Email message files can be read as plain text in TextEdit or any word processor.
To protect your email messages from being viewed by others while in your account, you would have to lock the folder, putting it into an encrypted disk image that required a password to be opened and mounted. You would have to double-click on the image and give your password to mount it before launching Mail then unmount it as soon as you're done. My guess is that you could replace the ~/Library/Mail folder with an alias pointing to the folder on the disk image.
It may work, but it seems like a lot of unnecessary hassle.

I just downloaded Acrobat XI and the addin options is not showing up for Access 2010

I just downloaded Acrobat XI and the addin options is not showing up for Access 2010

Acrobat XI Pro/Standard doesn't support MS Access 2010: http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Third-party version/ Acrobat Version (ship date)
Acrobat 6
(April 2003)
Acrobat 7 (January 2005)
Acrobat 8
(November 2006)
Acrobat 9 (July 2008)
Acrobat X (November 2010)
Acrobat XI (October 2012)
MS Access
Office 97
x
x
x
x
x
x
Office 2000 (Office 9)
N/A
√
√
x
x
x
Office XP (Office 2002/Office 10)
N/A
√
√
√
x
x
Office 2003 (Office 11) (11/17/03)
N/A
√
√
√
√
x
Office 2007 (Office 12) (11/30/06)
N/A
N/A
√ (8.1)
√
√
x
Office 2010 (Office 14) 32 bit
x
x
x
x
√
x
Office 2013 (Office 15) 32 bit
x
x
x
x
x
x

I have a photo in an album and in camera roll. I am trying to delete the photo from the camera rol and the only option that i get is : delete everywhere? Noooooo i just want to delete it from camera roll!!!!!

I have the same photo in an album and in camera roll. I am trying to delete the photo from the camera rol and the only option that i get is : delete everywhere? Noooooo i just want to delete it from camera roll!!!!!

The way that I understand that it works, is that the photos are not copied into the new albums, instead it just points to the photos - the number of photos on the iPad in Settings > General > About doesn't increase when you create new album so I assume from that that it isn't copying the photo, just pointing to it. So if you delete the photo from the camera roll you will therefore also be deleting all the pointers to it

(OSX 10.5.8, PowerPC 1.25 GHz) Recently, the keyboard lighting stopped working and the preferences option has disappeared. What happened?

(OSX 10.5.8, PowerPC 1.25 GHz) Recently, the keyboard lighting stopped working and the preferences option has disappeared. What happened?

Reset the Power Management Unit (PMU): http://support.apple.com/kb/HT1431#faq10 . If that doesn't do it, reset PRAM: http://support.apple.com/kb/HT1379

What are the differences between Turn in Final Timesheet and the other option: Send Progress for Selected Tasks?

Hello,
The resource filled his/her timesheet in PWA.
Now :
What are the differences between Turn in Final Timesheet
and the other option: Send Progress for Selected Tasks?
Thanks

You are partially correct and partially wrong.
Turn
in Final Timesheet sends
the timesheet to the Timesheet Manager for Approval
but task update always goes to Status manger of the task. Taks manager you can see in MPP(insert status manager field then check)
Yes
after approval progress will be available in MPP as well as in Projectweb app as % complete .
Send
Progress for Selected Tasks
Send progress of selected task to status manager after approval update will be available in both MPP and Projectweb
app as % complete.
In Send
Progress for Selected Tasks Timesheet
Manager doesn't receive anything in his Approval center
because all the update directly go to Status manager Approval center.
Here you have to understand
that there are two role Timesheet Manager(for timesheet approval) and Status manager(for task
actual approval)
kirtesh

I'm getting a similar message: There was an error opening the database..." and the only option I get is a "quit" button. Help!

I'm getting a similar message: First it offers me chance to repair - but if I it repair, it crashes. Then if I select do not repair I get the following warning: There was an error opening the database..." and the only option I get is a "quit" button. Help!

From the path in the error message you posted it appears that the library is not on your internal (root) drive.
What type of disk is the library on and how is it formatted?
The crash log Léonie is referring to is what is printed out when Aperture crashes. You wrote that Aperture crashes in your first post so if the app crashes you must have gotten a crash report.
Message was edited by: Frank Caggiano

I recently updated my iphone 4s for verizon. Its the newest update..anyways it ran through the processs of updating and then told me to plug it into my computer. I did and the only option i got was to restore my iphone

I recently updated my iphone 4s for verizon. Its the newest update..anyways it ran through the processs of updating and then told me to plug it into my computer. I did and the only option i got was to restore my iphone. I did and on my iphone the bar loaded to about 75% and stopped. My computer came up with an error. It said it was unavailable to restore this is iphone and unknown error occured. I tried using a different cord different usb slot checked my computer software updated my itunes but the same effect happened. I am getting very worried that my iphone is going to go in the trash soon. Can anyone help with annoying problem.

Hello the_problematic_iphone
Check out the article below if you are not able to restore your iPhone.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Everytime I attempt to open iPhoto, a message comes up saying, "iPhoto is unable to open this library," and the only option if gives is to quit. How do I get it to open?

When I select iPhoto to open the application, a message comes up saying, "iPhoto is unable to open this library," and the only option available is to quit. I don't know what library iPhoto is attempting to open, but all I want to do is just start iPhoto over from scratch.

Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library' to find out what Library is in question. Use the 'Create Library' option to make a new one.
To try and repair the damaged one:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I updated my iPod touch 3G to iOS 5.1.1 and the wifi option has greyed out. how can i fix this problem quickly ?

i updated my ipod touch 3g to ios version 5.1.1 and the WiFi option has greyed out
how do i fix it ??

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

HT1351 I just logged into my applie ID and my old Ipod which I may have hooked up to my wifes account to fill with songs...now when I tie it into my computer with my apple ID I can't sync. I go to file menu/library and the sync option is grayed out

Can't seem to sync an version 4 ipod with an old itunes account of mine. I may have hooked it to my wife's account. The only option I have when going to file/library is "transfer purchased from Adam's Ipod"

I'm not sure if the crash is or isn't related to fonts.
Deciphering the crash long is something I don't have any experience with.
I'm not even sure how the crash log is structured. I've downloaded two screen captures: one from the top of the adobe Photoshop crash log and one from the bottom. Perhaps someone more knowledgeable than I can discern what may be causing the crash?
Screen capture from the top of the Adobe Photoshop crash log:
Screen capture from the bottom of the Adobe Photoshop crash log:
Any ideas?
Thanks a bunch.

When downloading is complete, I can not see, run, nor access the file; it only appears in the "Downloads" window (and not the specified folder) and the only options permitted are to delete it, or to go to the download web site; what's blocking it?

My PC's OS is 'MS Windows Vista Home Premium'. As my initil question states: When downloading, after the download completes, I can not see, run, nor access the file in it's designated folder. The download only appears in the "Downloads" window and the only "Right Click" options permitted are to "Remove From List", "Select All", & "Copy Download Link" I also can not double click to run it. What's blocking it?
I have a similar problem when accessing .zip files that are attachments to my emails. Here, however, I can place the file in a designated folder, however, the .zip file and it's compressed content files are file-typed as "FireFox Document" and I get permissions errors when running an unzip tool.
Why are my download files being quarantined ??? Is there a security setting option I need to change???
To get around this, I'm using IE to download and install these files, but switching back & forth between FireFox & IE is a real pain.

It's your anti-virus not working correctly while scanning. You can turn off the option to scan in Firefox's '''about:config''' by filtering for '''browser.download.manager.scanWhenDone''' and double-clicking that line to change the value to '''false'''

Airport WDS Network and the 5GHz Option

Setting up any Airport base station with basic settings is simple but there always seem to be options that are not well covered in the 'manual' when setting up slightly more complex networks. I'm hoping someone can provide some clarification on our configuration or parhaps some advice.
For many years we have used a series of generations of Aiport basestations to create a WDS (wireless distributed) network. This is where one base station is the master and other base stations extend the range of the network wirelessly. This is not a set of wireless basestations creating an extended network by sitting on an ethernet backbone - that's a different configuration.
Anyway, we now have a Time Capsule, an Airport Extreme, and an Airport Express. The Time Capsule is the master and the other two base stations extend the network. By default, the basestations select the channel automatically but we have selected manual channels because we have neightbours that all seem to want to sit on channel 1. We've opted for channel 13, a less used channel.
[Internet ADSL Modem]
|
[Airport Extreme] ---- [Time Capsule] ---- [Airport Express]
The Extreme and the Express both operate in Bridge Mode only, that is, they simply extend the configuration of the master basestation and do not ditribute private addresses or do any NAT. I reckon this keeps it simple. Any changes made on the Time Capsule - such as Access Control changes - are pushed out to the other two stations automatically. This seems to be a significant improvement over version 5 of the airport software.
My main question relates to the 5GHz network option. I can turn on a 5GHz discrete network on the Time Capsule. It receives a unique name so it's clearly distinguished from the 2.4GHz network when connecting to it on our Macs. You would expect the other two base stations to be able to extend the 5GHz network too but their 5GHz options remain turned off by default. I can turn them on manually but I'm not sure if they should all be configured to work on the same channel or even if turning them on at all is a good idea.
Over the years, the setup of a WDS network has become easier (if only for the reason that Apple has removed some of the more confusing options and simply enables them in background). But the 5GHz network configuration is far from clear. Any advice anyone might have would be much appreciated. Thanks.

My main question relates to the 5GHz network option. I can turn on a 5GHz discrete network on the Time Capsule. It receives a unique name so it's clearly distinguished from the 2.4GHz network when connecting to it on our Macs. You would expect the other two base stations to be able to extend the 5GHz network too but their 5GHz options remain turned off by default.
It appears as if your Time Capsule is a simultaneous dual band version which produces both a a 2.4 GHz and 5 GHz network.....and you have enabled the option to assign a separate name to the 5 GHz network.
If both your AirPort Extreme and AirPort Express are also simultaneous dual band versions, they can extend both the 2.4 GHz and 5 Ghz signals from the Time Capsule.......but only if the Time Capsule is configured to use the same wireless network name for both bands.
The simultaneous dual band version of the AirPort Express is easy to identify......it looks like a miniature AirPort Extreme. Check the Model No on the bottom of the AirPort Extreme and report back with that to find out if your AirPort is simultaneous dual band.
Earlier versions of the AirPort Extreme could produce a 5 GHz or 2.4 GHz network, but not both at the same time.
Once we have clarification on your AirPort Extreme and AirPort Express, we can decide on the options that will be available to you as far as "extending" both bands.

FMW11G and the registry option in ADF BC SDO service adapter

Similar Messages

Maybe you are looking for