Fn Key does not work in Vista on a Satellite A100-192
After Vista Installation Fn Key don't work.
HotKey Utility and other tools are installed (in recommended order), but when Vista start appears Error message: "Start HotKey Utility failed".
All other device is working.
Hello Kat
I have the same notebook. It is Satellite A100-504 delivered with WXP. It is different number (504) but the same hardware configuration and number PSAA9E. I have preinstalled Vista last week successfully and everything works fine.
Do you use Toshiba Vista upgrade installations DVD or you have own Vista DVD?
Anyway, I have installed clean Vista OS (using Microsoft installations CD). After doing this I have visited Toshiba download page and at first downloaded document called Installations Instructions.
Please do the same and install all listed stuff in the listed order. That is very important. After doing this Vista should run well and also all Toshiba designed tools and utilities.
BTW: power saver utility is not like before under WXP. Now notebook uses Vista power settings.
Similar Messages
-
The hot key (ctrl + alt + key) does not work. This is in Windows Vista.
Thank you Morbus and Cor-el, for your prompt replies. Here's what I did: I've placed the Firefox icon in the quick launch toolbar. So I right-click this firefox icon>Properties>Shortcut tab>in Shortcut Key field, add X (the word "None" changes to "ctrl + alt + X")>Apply>Okay>and that closes the dialog window.
Then, to try the new launch short-cut, I press and hold down, in order, ctrl, then alt, then x (holding all three down) . . . and nothing launches.
I thought this would do it! So any further thoughts would be a splendid help ---- many thanx! -
My down arrow key does not work as it should
Hello to you.
My down arrow key does not work as it should.
When I use my down arrow key is the whole side going down.
It is annoying when you write that you always end up bottom of the page when using the Down arrow key. I hope I can help me
I use Windows Vista.
Yours faithfully
Anders LodbergCheck if you enabled scroll lock (fn + insert), in excel it scrolls page when enabled and move across cells when disabled
3000 N200 0769-AL3, Intel C2D 2G T5750, IEL10 mb, Kingston 4G RAM, Samsung 320G HD, Broadcom lan 100, Agere modem 56k, Broadcom wifi g, AuthenTec fingerprint reader, Sonix 1.3M camera, LG DVD burner, Samsung 15,4" 1280x800 BrightView, Intel X3100 IGD 384M, Ricoh 5in1, Ricoh 1394, vista home premium sp2 -
This is very strange, please read.
My tab key does not work. It will not move from one text field to another.
I have checked my keyboard settings. "Full keyboard access:" is at the default "Text boxes and lists only".
I have deleted this user and recreated the user, and with the completely new user the tab key does not work. Other users on the machine it DOES work.
This is happening now on 3 of our 5 machines.
Lastly, when I turn on the keyboard viewer (International/Input Menu/Keyboard viewer: it shows you what key the system thinks you are pressing when you press a key on the keyboard), it shows that when I press the tab key, the Command key is being held down instead. It's not showing that the tab key is being pressed.
Has anyone seen this previously? Again, it's happening on 3 of our 5 machines (some users the tab key works, some users it doesn't). These are fresh user creations (no special software installed, no prefs changed, etc...)
Thank you for any info!!!"Repair Disk Permissions" from Disk Utility may help.
Also, cmd-opt-n-v (Clear NV RAM) may help as well.
Mihalis.
Dual G5 @ 2GHz Mac OS X (10.4.6) -
Always Script Editor ... Alt Gr key does not work
Hi,
With IE6 in SQL Script Editor
Alt Gr Key does not work.
For instance, I cannot type ||
In fact it's a copy-paste from SQL command (which works well)
Note Script Editor does not work with Firefox.
Thank you for any information
Regards
JRD120You might try this:
Remove any USB device except mouse/keyboard
Perform a PRAM-reset (hold ALT-CMD-P-R until you've heard the starting chime 3 times) -
My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this? If not is there any way to actually get a genuis appointment lol to get one of them to have a look at the hardware on the keyboard?
Apple Support (formerly ExpressLane):
https://getsupport.apple.com/GetproductgroupList.do
https://getsupport.apple.com/GetSASO?SG=SG001&locale=en_US -
Brand new macbook --- DELETE KEY DOES NOT WORK --- how to fix?
I have a brand new MacBook and the delete key does not work. Is there a way to fix this?
You have 14 days to exchange it no questions asked.
-
MacBook Pro up arrow key does not work how to fix it?
When I am just working on the computer the up arrow key does not work at all but when I use bootcamp to go to the PC side the arrow works so i know its not a phisical problem, i have tryed everything i know and still no success.
Hello brooklinekilla,
I would be concerned too the up arrow key on my keyboard was not working. I found an article that can assist with further isolating and troubleshooting issues with the built in keyboard. I recommend following the steps under the section titled, "Some keys don't work as expected" in the following article:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
TS1996 my zero key does not work as it should after software update any help
my zero key does not work after a software update when i try to use it /pp0 then volume symbol appears on the screen just happened after the update
Hello, pakie1.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that you may find helpful when experiencing keyboard issues.
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Cheers,
Jason H. -
F2 key does not work with excel
Dear Friends,
when i am working with excel, f2 key does not work as its shortcut. can you please help me how i can solve this. thanks a lotwhat if you press Fn + F2? Does anything pop up?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
4gb creative zen v plus does not work in vist
hello
i just got one of these..and the cd provided does not work in vista..i read on the site that this model has nati've vista support then why doesnt it work for me?
any help appreciatedHi,
What do you mean by the cd does not work in vista?
Can you tell us what happens when you try to install using the installation cd, error messages, etc?
Try plug in your Zen V Plus to your computer, does it get detected? -
New Apple Keyboard Launchpad F4 key does not work
New Apple Keyboard Launchpad F4 key does not work
Hi, I have now got ne new wireless keyboard because my old one broke. I connected the keyboard, the F3 key (Mission Control) functions, the F4 key, especially for Lunchpad does not work, I'm Lion on it, previously on the old keyboard I had in 2009, he occupiedwith Launchpad F5.
Have System Preferences / Keyboard / Keyboard Shortcuts reset everything goes ......... but not yet!!
Maybe someone can help me!!
Thank you
greetingHi,
Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
- Quit System Preferences (if open)
- Delete this document to remove a carry-over mapping error.
- Then logout
Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
Note2: This document is in your users preferences folder.
~/Library/Preferences/com.apple.symbolichotkeys.plist
-Alan -
Enter key does not work anymore in address bar after FF update
After the update the Enter key does not work anymore. Neither when I type the url directly, nor when I select it from the history.
In short FF has become unusable. Now I need to install and use a less crappy browser. Extremely sloppy, amateuristic update.see if this is helpful : go to Tool > Options > Advanced > General tab > Browsing and '''Uncheck''': "Use hardware acceleration when available" .
-
Clear Key does not work in DW (OSX)
In Dreamweaver, when you select a local file and hit the
Delete key (back delete located in between forward slash and the
end key), nothing happens. In the contextual menu, there is a Clear
key symbol but nothing happens.
Does anyone why the Clear key does not work?
I'm using OS X 10.6. But I could remember this happening in
earlier OS.
ThanksReally? Something is wrong there. I sure can....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"(_seb_)" <[email protected]> wrote in message
news:epu8iu$sed$[email protected]..
> philoman wrote:
>> synterx, thanks for your reply.
>>
>> Does it work for you on the Local Files as well???
>>
>> Command-Delete only works for me on the Remote
Files.
>>
>> Any ideas?
>
> I can't delete files or folders, and can't create
folders in local files
> on Mac with DW2004. I always keep my site folder open in
the finder to do
> that.
>
> --
> seb ( [email protected])
>
http://webtrans1.com | high-end web
design
> Downloads: Slide Show, Directory Browser, Mailing List -
My key does not work/Invalid Registration
I have been trying for days to unlock Quick Time(QT) Pro, but my registration key does not work!!! I've done all possible requirements, I have copied and pasted my user name and the key code (so those are correct), I do the correct qualifications to run the software, I am using the QT control settings, and yes I do have QT 7.0.3. All my criterias meet to unlock QT Pro but I keep getting the message saying Invalid Registration. I've done all possible trouble shooting techniques given by Apple's tech support but I've simply have had no luck. To my understanding the key code has to be 5 sets of 4 numerical characters (20 characters long) but the one that I got from Apple is only 7 characters long. I've clicked on the link that retrieves a lost key but I get the same number. I try calling customer service but have had no luck in reaching a live operator. What do I do?
Yea you are right, I am inputting the part number. However, I keep looking for the 20 character long key but there is nothing there in either the confirmation email or the invoice email that they sent me. I check the "Download History" on the Apple Store website but it only gives me the name QT Pro, the part number and the date that I purchased it. There is no 20 character long key given. Could they have not given me the key by accident? Like I said, event when I go to the link to retrieve my lost key, it gives me the same part number! Please help, its been more than a week and I am getting frustrated!!!
Maybe you are looking for
-
Regarding creation Of Help View
Hi , Can Any body Tell me what is the step by Step Procedure how to create the Help View. Plz it's urgent . Thanks&Regards . Nihar.
-
Youtube - Flash Update error message
You need to upgrade your Adobe Flash Player to watch this video. Download it from Adobe. This is the error message I keep experiencing whenever I open Youtube. I am pretty confident that this is somehow related to a virus of some design as I have n
-
Front face camera won't work for pictures. But it works perfectly on FaceTime, any way of fixing this? When I try and change the camera to face front it acts like it's going to change then kind of freezes and won't let me change back to the back came
-
I am trying to set PE 9 as my external editor for iphoto.
I have tried Preferences > advanced > then pick PE 9, but it is not showing up? Only the word applications is showing up. How to i get PE9 to show up?. I have iphoto 11.
-
Restore standby database 10gR2 after crash
The RMAN do a full backup of the physical standby of the DataGuard 10gR2 everyday. If the standby was dead, disks corrupted, and replaced with a new server. Can we restore the standby from the RMAN backup, apply the archivelogs or we have re-create t