Fn-key not working on NB305 after upgrade of Win7

FN-key stopped showing flashcrads on a NB305-N410WH after an upgrade of Win7 Ultimate was applied to the standard Win7 Starter.
I reinstled with latest flashcards utility (2.00.43) and TVAP (1.2.33) but the problem persists. The only possibility to operate flashcards is with mouse but I'd like to get the fn-functionality working. Any idea what I am missing? Thank you.

Reinstalling the keyboard driver (Microsoft 21.06.2006, 6.1.7600.16385) did not help either.
Perhaps someone can post a list of the correct driver versions for this NB305-N410WH. Since it is a relatively new product I did not find anything on the internet.
When searching the download section by OS Win7 32 bit, I only get 12 files for download:
Toshiba 3G Connection Manager for Windows XP/7 (32/64)(v2.1.90; 01-26-2010; 56.14M)
Toshiba 3G Connection Manager for Windows XP/Vista/7 (32/64)(v2.1.69; 10-19-2009; 29.11M)
Sierra 3G driver for Windows XP/7 (32/64)(v1.1.18; 01-26-2010; 25.67M)
Sierra 3G driver for Windows XP/7 (32/64)(v1.1.10; 11-02-2009; 25.65M)
Toshiba Web Camera Application for Windows XP/Vista/7 (32/64)(v1.1.1.9; 11-20-2009; 28.79M)
Bluetooth Stack for Windows XP/Vista/7 (32/64) by Toshiba(v7.10.01(T); 11-06-2009; 76.53M)
Toshiba Disc Creator for Windows XP/Vista/7 (32)(v2.1.0.2; 10-29-2009; 9.67M)
Toshiba USB Sleep and Charge Utility for Windows XP/Vista/7 (32/64)(v1.3.2.0; 10-28-2009; 6.67M)
Toshiba HDD/SSD Alert for Windows XP/Vista/7 (32)(v3.1.0.3; 10-26-2009; 36.65M)
Toshiba Service Station for Windows XP/Vista/7 (32/64)(v2.1.40; 10-09-2009; 12.81M)
Intel Matrix Storage Manager for Windows XP/Vista/7 (32/64)(v8.9.0.1023; 10-23-2009; 4.25M)
Bluetooth Monitor for Windows XP/Vista/7 (32/64)(v4.04; 10-18-2009; 9.54M)
I assume that these are not all files that are needed such as the TVAP is not listed unless there has not been an update since the notebnook was manufactured.

Similar Messages

Satellite A500 fn keys not working at all after windows 7 upgrade

Hi everyone,
I'm using Satellite A500 which i just did the windows 7 upgrade (32 bit) yesterday, however, i can no longer use the FN key on the keyboard which i'd use it very often.
can anybody help??? much appreciated!!
mav

Hi, thanks for your reply,
I'd some search on the forum, however, there're some similar issue, but they are not A500 model, so i m not sure it's reference.
yeah i did download and install the value added package, and restarted my flash cards, and i did change the setting of the flash card, at least now i can use it by moving my mouse to the top of the screen and they pop up. but yet, the FN key still not working at all.
i couldnt really find "common modules" or "hot key" to download, could anyone post the link here? if that would make my FN key work just like before?
Thanks alot!

BINARY SEARCH does not work as before after upgrade

We recently upgraded from HRSP 26 to HRSP 40 as well as similar upgrades in non-HR areas on our ECC 6.04 system. We've been in SAP since 1998, and have a lot of old custom programs which were written when we were still new at ABAP. In a few, we put records into an internal table sorted the table, maybe added a few more records to the table, and did a READ BINARY SEARCH. Granted, this is not correct, adding records to a table after it is sorted. But these programs have worked for more than 10 years and now, since our upgrade, the READ BINARY SEARCH does not always find a record where it did before the upgrade.
So this is mostly just a heads-up. If you are missing data in reports after upgrading, this might be the issue. Also I am wondering if anyone has experienced this.
Heads-up!
Janice Ishee

Hi Janice,
you did not give any context. Please note that it is a popular error to think that a SELECT statement will fetch data in order of the primary key of the table - although it happens quite frequently. So always first sort, then binary search.
Probably not related to upgrade.
Regards,
Clemens

Web Query (.iqy) not working in Excel after upgrade to 11.1.1.6

After upgrade 11.1.1.5 to 11.1.1.6, the Web Query (.iqy) does not work. After open the .iqy file in Excel, entered the user and password, it only pulls in "PK" in one cell, instead of the expected analysis report. This was working in 11.1.1.5 before upgrade.
Does anyone know how to correct this issue? Is this a bug in 11.1.1.6, or required some new configuration settings?
Thanks in advance.
DX

A bug has been registered.
Bug 14040587 - OBIEE 11.1.1.6: OPENING WEB QUERY (.IQY) FILE IN EXCEL SHOWS JUNK CHARACTERS.

Simple Query working on 10G and not working on 11gR2 after upgrade

Hi Folks,
This is the first time i am posting the query in this Blog.
I have a small issue which preventing the UAT Sigoff.
Simple query working fine on 10.2.0.1 and after upgrade to 11.2.0.1 its error out
10.2.0.4:
=====
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=1;
COUNT(*)
1
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=00001;
COUNT(*)
1
SQL> select ATTRIBUTE1 FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=1;
ATTRIBUTE1
00001
11.2.0.1:
=====
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=1
ERROR at line 1:
ORA-01722: invalid number
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=00001
ERROR at line 1:
ORA-01722: invalid number
SQL> select ATTRIBUTE1 FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1='1';
no rows selected
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1='00001';
COUNT(*)
1
SQL> select ATTRIBUTE1 FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1='00001';
ATTRIBUTE1
00001
++++++++++++++++++++++++++++++++++++++++++++++
SQL > desc APPS.HZ_PARTIES
Name Type
======== ======
ATTRIBUTE1 VARCHAR2(150)
++++++++++++++++++++++++++++++++++++++++++++++
Changes:
Recently i upgraded the DB from 10.2.0.4 to 11.2.0.1
Query:
1.If the type of that row is VARCHAR,why it is working in 10.2.0.4 and why not working in 11.2.0.1
2.after upgrade i analyzed the table with "analyze table " query for all AP,AR,GL,HR,BEN,APPS Schemas--Is it got impact if we run analyze table.
Please provide me the answer for above two questions or refer the document is also well enough to understand.Based on the Answer client will sigoff to-day.
Thanks,
P Kumar

WhiteHat wrote:
the issue has already been identified: in oracle versions prior to 11, there was an implicit conversion of numbers to characters. your database has a character field which you are attempting to compare to a number.
i.e. the string '000001' is not in any way equivalent to the number 1. but Oracle 10 converts '000001' to a number because you are asking it to compare to the number you have provided.
version 11 doesn't do this anymore (and rightly so).
the issue is with the bad code design. you can either: use characters in the predicate (where field = 'parameter') or you can do a conversion of the field prior to comparing (where to_num(field) = parameter).
I would suggest that you should fix your code and don't assume that '000001' = 1I don't think that the above is completely correct, and a simple demonstration will show why. First, a simple table on Oracle Database 10.2.0.4:
CREATE TABLE T1(C1 VARCHAR2(20));
INSERT INTO T1 VALUES ('1');
INSERT INTO T1 VALUES ('0001');
COMMIT;A select from the above table, relying on implicit data type conversion:
SELECT
FROM
T1
WHERE
C1=1;
C1
1
0001Technically, the second row should not have been returned as an exact match. Why was it returned, let's take a look at the actual execution plan:
SELECT
FROM
TABLE(DBMS_XPLAN.DISPLAY_CURSOR(NULL,NULL,NULL));
SQL_ID g6gvbpsgj1dvf, child number 0
SELECT   * FROM   T1 WHERE   C1=1
Plan hash value: 3617692013
| Id | Operation         | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |      |       |       |     2 (100)|          |
|* 1 | TABLE ACCESS FULL| T1   |     2 |    24 |     2   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - filter(TO_NUMBER("C1")=1)
Note
   - dynamic sampling used for this statementNotice that the VARCHAR2 column was converted to a NUMBER, so if there was any data in that column that could not be converted to a number (or NULL), we should receive an error (unless the bad rows are already removed due to another predicate in the WHERE clause). For example:
INSERT INTO T1 VALUES ('.0001.');
SELECT
FROM
T1
WHERE
C1=1;
SQL> SELECT
2    *
3 FROM
4    T1
5 WHERE
6    C1=1;
ERROR:
ORA-01722: invalid numberNow the same test on Oracle Database 11.1.0.7:
CREATE TABLE T1(C1 VARCHAR2(20));
INSERT INTO T1 VALUES ('1');
INSERT INTO T1 VALUES ('0001');
COMMIT;
SELECT
FROM
T1
WHERE
C1=1;
C1
1
0001
SELECT
FROM
TABLE(DBMS_XPLAN.DISPLAY_CURSOR(NULL,NULL,NULL));
SQL_ID g6gvbpsgj1dvf, child number 0
SELECT   * FROM   T1 WHERE   C1=1
Plan hash value: 3617692013
| Id | Operation         | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |      |       |       |     2 (100)|          |
|* 1 | TABLE ACCESS FULL| T1   |     2 |    24 |     2   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - filter(TO_NUMBER("C1")=1)
Note
   - dynamic sampling used for this statement
INSERT INTO T1 VALUES ('.0001.');
SELECT
FROM
T1
WHERE
C1=1;
SQL> SELECT
2    *
3 FROM
4    T1
5 WHERE
6    C1=1;
ERROR:
ORA-01722: invalid numberAs you can see, exactly the same actual execution plan, and the same end result.
The OP needs to determine if non-numeric data now exists in the column. Was the database characterset possibly changed during/after the upgrade?
Charles Hooper
Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
http://hoopercharles.wordpress.com/
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

Google Talk not working with Messages after upgrade to Mountain Lion

After upgrading to Mountain Lion, I'm no longer able to use Google Talk with the new Messages App. It worked fine on iChat, but now I cannot enable the account. When I try to check the enable box, it immediately unchecks itself and nothing happens. Any suggestions?

Welcome to Apple Communities
Open Finder, press Option key and select Go > Library. Open Preferences and delete com.apple.imessage.bag.plist and com.apple.imservice.iMessage.plist

Send button not working on sms after upgrade

My send is no longer working on sms after i upgraded. I have done factory setting and still not working . Any ideas of anything else i can try ? frustrated

I have same problem. Can open message. As if keyboard is frozen.
Unable to type then send. Also, tried shutting off preview.

Calender not working in 4s after upgrading to IOS 8 and and after synching with my new iphone 6 , calender not working in 6 as well. Please help.

Hi my old phone 4s after upgrading to IOS 8, Calender is not working. Just a blank page and it quits automatically. I bought a new iphone 6+ and after synching , it also showing the same issue.

There's no way a software update causes a hardware issue. This is just coincidental. Bring your phone to Apple for evaluation and possible replacement.

Fullscreen mode not working in aperture after upgrading to Lion

I recently upgraded to Lion and Aperture is not working at all in Full screen mode. I have followed the ideas in the forum (unchecking the preferences for spaces) and nothing has worked. I have reinstalled the Aperure update and this did not work either. Any other ideas?
regards, Jim

Jim,
Try this:
if Aperture is running, quit;
control click Aperture's icon in the dock;
in the menu that pops up, navigate to the Options sub-menu;
make sure "None" is selected in the "Assign To" section at the bottom.
Mine was originally set to "This Desktop", probably as a hold-over from Snow Leopard, where I had Aperture assigned to its own Space. After I updated to Lion, Aperture was misbehaving in full screen mode until I changed it to "None".
I hope this helps...
- Bob

Ipod not working in car after upgrade

After an upgrade ipod touch shows unreadable in my volvo s80 2010

cjwj, downgrading the iOS is not supported by Apple and the method you outlined does not work. When restoring an iPod, iTunes contacts Apple and will only allow restoring using the latest available update file.
flcolvin7, Contact Volvo and get them to issue a firmware update for the car.

IPhone does not work in car after upgrading to os5

After upgrading to os5 my build in hands free device does not work properly anymore, lot of noise, disconnects, connects in general not usable anymore.
How to fix this?

Does your aftermarket solution connect to the Nano's headphone jack or to the dock connector?
If it connects to the headphone jack I would suggest buying an iPhone headphone adapter. I'm expecting mine to arrive via FedEx tomorrow so that I can use my iPhone in the car with a cassette adapter.
Hope this helps.

Sound effects not working with SoundSticks after upgrade to 10.4.4

After upgrading to 10.4.4, the sound effects of OS X, such as emptying trash, iChat effects, etc, doesn't come out from the SoundSticks (first generation, connected via USB), even though I've turned it (effects) to the highest level, and selected to have it come out of the SoundSticks.
The effects are fine if I select Built-in Audio as sound output.

The names are updated to the following (although the documentation doesn't reflect this):
addDataSourceConnectionPool == createJDBCConnectionPool
addManagedDataSource == createManagedDataSource
addNativeDataSource == createNativeDataSource
testDataSourceConnectionPool == testConnectionPool
Hope it helps ...
Cheers!
Nimesh

Oracle Forms not working on 6i after upgradation on 9i

Hi all
shayan here how are u?
Hope all of u are fine.....
I have a problem that is i made the forms in 6i.....now after some time i upgrade the forms in the 9i...just compile all the forms in 9i and it works fine in 9i now...
Now i want that i used the same form in running in 6i but it is not running.....
is there is any way to run it......?
Thanks in advance
Shayan
[email protected]

yes i have the FMBs..........but when open the form in forms 6i it is showing acwards......some audio files is showing,there is no placement etc and when i try to run the forms it gives error can not adjust for out put.......however the form is opening in 9i successfully :(
Regards

TDM Digital Input not working in LP7 after upgrade?

I ran my first session today with LP7. I opened a version of a song I was working on in LP6. I have all of the DAE DTDM and Dig hw settings the same as in LP6. All of the tracks ply perfectly and no problems with plugins. When I went to record the vocals, the track I was using showed input and the waveform drew normally as expected. Of course I didn't listen back and went on to record 4 more passes of the lead coal to comp later. As the singer was leaving, I decided to play back the last take. To my horror; there was nothing on the track except digital noise full to 0db. My assumption was that it was some kind of digital clock sync issue with the 192. Checked HW settings and everything was set properly. Using AES input as clock sync, recording to AES 1-2 inputs just like in LP6. When i went to the screen that sets up the clock synchronization, it was set to digital. I changed it and then changed it back and a dialogue box opened and said that my clock source need to be set to digital. It was already set to digital AES1 1-2 enc. Has something changed since LP6? Thanks everyone for all of the help these past few days. I though this was going to be a simple upgrade...

***, BWF?! Guess I'm falling behind, had to google that stuff!
Yeah, I had the feeling it could be about wav. Guess I've always been hesitant with wav. files on mac's. Have no problems playing them back though....
Now, to ESB distortion. You really shouldn't have this. What PT/Logic config do you use? I'm running 10.3.8/PT6.9cs1/LP7.1, a pretty stable config and my esb distortion is long gone.
But here's a little procedure I had to do and it has been very successful on other rigs I helped out with as well:
1. Archiving and trashing ALL Prefs (yeah, you've heard it before but bare with me), Logic and Digi. Make sure you don't have any LAP 6 pref's either, there is one under system's preferences as well.
2. Restart the computer
3. Start Protools, set the playback engine to match your hardware and workflow
4. Quit PT
5. Start Logic-it will ask you if you want to run the setup assistant, say yes.
Now, be meticulous with your settings so it matches PT's playback engine.
6. When you're finished, open "Audio Hardware and Settings" and check the DAE's settings - it's probably not set to what you chose (bug?). Correct that so that, once again, you are matched with the PT playback engine.
Finished! (Well, apart from importing your KeyCommands from the old pref.)
Since I did this I've been more or less clear of issues, and it serves as an alternative to rebuild my autoload. Kind of...
Sorry if this is obvious, it's just that I know power users rarely go near automated "assistants" and I think there is a point in doing so since LP7.
I think Apple is putting power into such features, and this has surely helped my and a couple of other rigs.
There is ofcourse another reason for esb distortion and that's "dodgy" AU's.
I know that both Stylus RMX and Reaktor are very sensitive in DTDM environments. There is a certain logic to that, since they both are capable of handling huge amounts of files/computation.
Anyway, best of luck!
/Erik

Variable Exit Not Working with Personalization After Upgrade

We recently upgraded our BW production system from version 3.5 to 7.0. Currently, we have some web templates/reports that use date related
user exit variables in the query. For instance, we have a date range
variable that is populated with a 90 day rolling period in the Customer
Enhancement RSR00001 / program ZXRSRU01.
Before the upgrade, these variables would get populated by the Customer
Enhancement even if the web template/page was personalized. However
after the upgrade the, when the users try to personalize their
page/template the date range is not populated by the user exit anymore.
Instead, the date range that was present when personalization is being
set.
Seems like the sequence priority for the population of variables has
changed with the upgrade where personalization supercedes the customer
exit for variable population.
As a result, all these web reports are coming with wrong dates now
after the upgrade.

This is due to deactivation/format change of few info objects post upgrade.
This can be recitified by a program or by manual activation.
With NW2004s SAP Content contains the new versions of InfoObjects 0TCTLOW, 0TCTHIGH and 0TCTIOBJVAL having type CHAR with the length 60 are delivered.
In order to resolve the problem with personalization ensure that the right version of these InfoObjects in active. If still the old version with filed length 32 is used, it is necessary to activate these 3 InfoObjects using Administrator Workbench --> Business Content.
When activation is completed, personalization of variables should be repeated once again in order to write the values to the DSO 0PERS_VAR.
Program correction, I am not completely sure, but its something like RS_PERS_ACTIVATE.
Please check.
Naveen.A

Fn-key not working on NB305 after upgrade of Win7

Similar Messages

Maybe you are looking for