Focus point grouping for 6D with firmware change possible?

Does anyone know if it is possible with a firmware update to create an option to use just the center 9 focus points?  This would make it similar to the 7D center group.  I think this would be useful for some action shots.  This might be one feature that may help me commit to Canon for my next camera.  I am currently looking to upgrade to fullframe, but Canon seems to have taken out one feature too many in the 6D and leaves me stuck in the middle.  I don't know whether to jump ship and  and hassle with selling my beautiful 70-200 II zoom and the rest of the gear.  As a consumer, I still like the option of a flash in certain bright background situations.  Thanks.

I'm afraid you'll have to go to 7D or 5DIII to get Zone Focus or Expansion Points such as you want to use. 6D doesn't have it and I really doubt it ever will... that would be a pretty radical change to try to do via firmware... might not even be possible. But, hey, I'm no expert on writing firmware and some people manage to do some interesting camera hacks (search for Magic Lantern, for example).
But frankly, I shoot subjects like you want to shoot with just a Single Point most of the time with my 7Ds. Before that I did pretty much the same with 50D, 30D, and 10D. It takes some practice, but is the best way to insure focus is right where you want it as consistently as possible. Some days I take a couple thousand images and, with 7D and it's very quick AF, typically 97 or 98 percent are correctly focused, and I figure most of the missed focus shots are my fault, not the camera's. I had a few more missed focus with 50D and earlier, but still managed upward of 90 percent most of the time (when I was in practice).  
I only use the Zone and Expansion modes occasionally on 7D. Mostly when the subject is large or is against a plain or very distant background. Otherwise the camera still might choose to focus using the wrong point.
The 5D Mark II has a form of expansion points, but it's done with 6 "hidden" Assist Points that aren'tt shown in the viewfinder, are clustered right around the center point, and only work in AI Servo mode. It's sort of as if the entire Spot Metering circle is one bid AF point. Unfortunately, this only moderately helps the 5DII with AI Servo/moving subjects. Tracking moving subjects just isn't the 5DII's forté. Only three of it's AF points  are the "better" dual axis type (the visible center one and two of the hidden ones). The rest (8 visible and four more hidden ones) are single axis... some horizontal, some vertical. Heck, all nine of your 50D's AF points are dual axis type, so to some extent it has a better sports/action focus system than the 5DII. I'm not knocking the 5DII, it's a great camera for other things.... just not so much for sports/action shooting.
On 7D, 5DIII the difference between Zone Focus and Expansion is that in Zone any of the points or even multiple points can be the "starting point" for focusing. In other words, it's like one large focusing point that will pick up on whatever object covered by any of the points is closest (like a smaller version of All Points/Auto Selection). In Expansion you choose a single "starting point", but the camera can switch to using one of the adjacent points if you don't keep the starting point on the subject.
I'd recommend 7D... there are some other advantages to using a crop camera for sports, as well. It's sort of like having a "free" 1.6X teleconverter and, since a lot of sports photography is done with telephoto lenses, a cropper helps leverage your longer lenses for all they're worth. For example, I use a 300/4 IS on 7D a lot for sports, easily handheld. If I were using any of the full frame models, to fill the viewfinder the same way I'd have to get out the 500/4 iS and a solid tripod to put it on (or at least a monopod).
Yes, it's got higher frame rate, too... Though to be honest I try to avoid using it too much... 8fps fills up memory cards and hard drives fast... and can mean a lot more time spent sitting at a computer editing the results. I found 7D an excellent upgrade from 50D. The 7D has very fast AF, ideal for AI Servo work... It's got a discrete chip handling AF, much like the 1D series have. AFAIK, 6D and 5DIII don't have that.
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM 

Similar Messages

  • Bluetooth Microphone Only, for use with wired headphones - possible?

    Hi all,
    Is there such a device as a bluetooth microphone, and could i connect it to the iphone for voice, with the audio being routed through my wired headphones?
    I would like to continue using my audiophile headphones, but want to avoid a wired iphone mic adaptor, as the extra cabling would be annoying to say the least.
    Cheers
    J

    I had an iphone 1G adapter for audio that when connected it only served audio to the headphones and the inside iphone microphone was still working and receiving my voice without the need for an externatl microphone.
    The adapter broke so I bought a new one and I updated to firmware 2.0 (from 1.1.4) the same time. The new adapter did not do the same thing, but I cannot decide if this is because of the firmware upgrade or the different new adapter.
    Hope it helps.
    I also want to plug headphones and use the in-built mic.
    If anybody knows the way please tell.

  • What is the recommended way to do multiple channel, single point sampling for control with an NI PCI-6255 in RLP?

    Hello,
    I am writing a driver for the M-series NI PCI-6255 for QNX. I have downloaded the MHDDK and have all the examples working. I have also enhanced the examples to do interrupt handling (e.g. on AI_FIFO interrupt or DMA Ring Buffer interrupt). My ultimate goal is to write a driver that I can use for closed-loop control at 500 Hz using all 80 channels of the NI PCI-6255. I may also need to synchronize each scan with a NI PCIe-7841R card for which I've already written a driver. I want an interrupt-driven solution (be it programmed I/O on an interrupt or DMA that generates an interrupt) so that the CPU is available to other threads while the 80 analog inputs are being read (since it takes quite a while). I also want to minimize the number of interrupts. Basically, I will need to collect one sample from all 80 channels every 2 milliseconds.
    There are many different options available to do so, but what is the recommended technique for the NI PCI-6255 card? I tried using the AI FIFO interrupt without DMA, but it seems to interrupt as soon as any data is in the AI FIFO (i.e. not empty condition), rather than when all 80 channels are in the FIFO, so more interrupts are generated than necessary. I tried using DMA in Ring Buffer mode to collect a single sample of 80 channels and interrupting on the DMA Ring Buffer interrupt, which appears to work better except that this technique runs into problems if I cannot copy all the data out of the DMA buffer before the next AI scan begins (because the DMA will start overwriting the buffer as it is in ring buffer mode). If the DMA is not in ring buffer mode or I make the ring buffer larger than one 80-channel sample then I don't have a way to generate an interrupt when one sample has been acquired (which I need, because I'm doing control).
    I saw something in the documentation about a DMA Continue mode in which it looks like you can switch between two different buffers (by programming the Base Count/Address with a different address than the current address) automatically and thereby double-buffer the DMA but there is no real documentation or examples on this capability. However, I think it would work better than the Ring Buffer because I could interrupt on the DMA CONT flag presumably and be copying data out of one buffer while it is filling the other buffer.
    Another option would be DMA chaining, but again, I cannot find any information on these features specific to the NI DAQs.
    I tried interrupting on AI STOP figuring that I could get a single interrupt for each scan, but that doesn't appear to work as expected.
    I know that DAQmx on Windows has the ability to do such single sample, multiple channel tasks at a fixed rate so the hardware must support it.
    Any suggestions would be appreciated.
    Thanks.
    Daniel Madill

    Hello,
    The interrupt that will happen nearest the times that you need is the AI_Start_Interrupt in the Interrupt_A group. This interrupt will occur with each sample clock. By the second time this interrupt fires, the AI FIFO should have the samples from the first conversion. If it is easier to use programmed IO, you can read the samples out of the FIFO until you get all 80.
    Additionally, you can set the DMA to send samples as soon as the FIFO is no longer empty...instead of waiting for half full or full. This change will reduce latency for your control loop. You can set AI_FIFO_Mode in AI_Mode_3_Register to 0. By the second time this interrupt fires, you should be able to check how much data is in the DMA ring buffer and read the 80 samples when they are available. You can make the ring buffer larger than 80 samples if you see data getting overwritten.
    There is no interrupt associated with 80 samples being available in the FIFO or 80 samples being available/transferred by DMA to the host. X Series has much more flexibility with these interrupts.
    I hope this helps!
    Steven T.

  • Export EDL or XML for seq with speed change

    Hi,
    I am trying to export an EDL or XML of a 30 sec sequence of 10 clips. 5 of them have speed change. Basic speed change, not variable. They are UC 10bit from a DigiBeta captured with a Kona 2.
    The problem is that the exported EDL or XML doesn't get the right clips in and out points for recapture on other systems. Any clue?

    As long as there are speedchanges in the sequence, FCP will screw the EDL timecodes for source clip in/out and position in the timeline....and it's way off.
    And the problem is not with Flame, if I open the XML or EDL in TextEdit, I see the TC mistakes. We do that all the time with the Avid MC and it works very well. Even if the speed changes wouldn't go through, I would expect clips coordonates and in/out to be ok.

  • Backup Problem with Firmware Change

    *I'm running Windows Vista with my iPod Touch 2G.
    I just downgraded my firmware from 3.1.1 to 3.0 but now when I try to backup my old iPod backup it tells me it cannot backup the data because the (recently downgraded firmware) software is too old.
    Is there a way to backup my old applications and music without sticking with 3.1.1 firmware?
    Or is the only option putting my apps back manually onto my iPod? I had both my apps and my music backed up before I reverted to 3.0 firmware.
    Thanks for your time in advance!

    Just cancel it. its just downloading and not installing to phone yet so no harm will happen. Something on your computer is creating problems for your download. Most likely the AV and firewall software of the LAN settings.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • An LSMW for Classification with multiple entries possible in the characte

    Hello, we've got a LSMW which works fine on a recording using transaction CLMM. This updates characteristics data ok as long as the fields are single value entires (eg "Y" or "N" or "")
    But now I want to add a new characteristic which can store multiple values eg Machine Type = "C10" or Machine Type = "C10, C18" or Machine Type = "C10, T01, T02, C30"
    When I try to adapt CLMM it gives me an error that the format of the field is not correct. I tried comma separated eg "C10, T01, T02, C30" but it was not accepted.
    Is there a special format for changing the multiple value characteristics in CLMM which I can use in LSMW?
    Is there a more cunning way?
    Do I have to get a development made for this??
    Has anyone solved this problem?
    Many thanks

    Hello,
    Why don't you use a Business Object Method (BAPI) in your LSMW.
    There are a lot of BOR objects related to classification data.
    Example : Business Object : BUS1088 - Characteristics with method CREATE.
    A batch input often gives problems, especially with multi value fields.
    When you use a BOR method in LSMW you can map your input files to the structures of the BOR method.
    Wim

  • Running Solaris 11 from a USB drive with persistent changes - possible?

    I am wanting to use Solaris 11 as the basis of a NAS for home use; the hardware is a HP N40L Microserver populated with 5 HDDs. As all of these HDDs will be used for data storage in a zpool configuration, I have no more physical space (without further hacks) inside the case for an additional OS drive. Therefore, I am wondering if it is possible to run Solaris 11 from a fast USB flash drive. I know there is a live USB image, but AFAIK, any configuration changes made when running this will not remain after a reboot - is this correct? And if so, is there any way to make the changes persistent?
    The only discussion I could find on this subject is this thread from a couple of years ago: https://forums.oracle.com/thread/2235078 - but I don't think the guy got a definitive answer.

    Running the important rpool on USB stick is not my favorite configuration. I would recommend reducing your data pool down to 4 devices and putting your root pool on the 5th disk. People ask about this in the datacenter and I wrote a best practice for it, which is not to use a USB stick for rpool, here:
    http://docs.oracle.com/cd/E26502_01/html/E29007/zfspools-4.html#gentextid-12349
    Your data is important, but the root pool is very important for keeping your data available. In the datacenter, we also worried that rack vibration might wiggle the stick right out of the drive. For home use, I've heard about pets jumping on boxes and disconnecting disk cables. Sounds paranoid, but I've seen it/heard it all.
    There is no reason why you can't put rpool on a USB stick, some operations might not be easy (see Dave's post), but I don't think its the best choice for optimal data availability.
    Thanks, Cindy

  • Carry out modification comparison for REPS  first.No changes possible.

    Hi all,
          Can anybody help me out. I am new to upgrade project. I have made all the adjustments in SPAU, but left out with one object.
         I have chosen reset to original for this object. When I want to add  some custom code. It is not allowing me to do so throwing an error saying that " The object is still in upgrade mode." . It is not locked under transport #, but it is stored in smodilog table under my name.
         I am not able to see this object even in SPAU transaction, to correct my actions.
    Thank You in Advance,
    Nirmala.

    Hi Rajneesh,
    please have a look at following link and get a key from SSCR:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c8/19766d43b111d1896f0000e8322d00/frameset.htm
    Regards
    Bernd

  • Metadata - Canon Focus Points : can LR show them ?

    I shoot using Canon 400D and also have Canon's Zoombrowser software. One thing that Zoombrowser does that I use occasionally is to show the auto-focus points active for a given shot.
    Is there anyway to get Lightroom to show the focus points in a similar manner ?
    I'm guessing there probably isn't, I can't see that info' anywhere in the metadata using Exiftool so I presume it's in a private Canon data area. Just thought I'd check that there's not a switch I'm missing somewhere.
    Cheers

    The QCC wrote:
    Just for the record, the AF point is stored in the EXIF data area for Canon EOS cameras.
    And over there for Nikon, and over there for Pentax, except that the Pentax bodies also have to change this based on the lens mounted, so the metadata is in at least two places...

  • Where can I find detailed instructions for adding updated firmware from my computer to my Canon 6D?

    I have downmloaded the latest firmware for my Canon 6D to my computer. I cannot find detailed instructions to add the firmware to my camera. Do I use the USB port and cable from the computer to the camera? It must be simple but I cannot seem to find instructions and I do not want to make a mistake.
    thank you

    From the download site:
    Firmware changes:
    Firmware Version 1.1.4 incorporates the following fixes:
    1. Fixes a phenomenon in which some images cannot be transferred to mobile devices running the EOS Remote app.
    2. Corrects an error in the German language Feature Guide.
    3. Corrects an error in the Korean language Feature Guide.
    Firmware Version 1.1.4 is for cameras with firmware up to Version 1.1.3. If the camera's firmware is already Version 1.1.4, it is not necessary to update the firmware.
    Please note:
    After the firmware update has been performed the following setting will be reset to default.
    Menu > Custom Function> C.Fn II: Autofocus > AF Microadjustment> 1: All by same amount
    When updating the firmware of the camera, please review the instructions thoroughly before you download the firmware.
    Q&A:
    Preparations for a firmware update:
    Windows
    After the downloaded compressed file (.zip file) is extracted, a firmware folder is created.
    *Extracting the downloaded file:
    Right-click the zip file, and then select Extract All to extract the file.
    The extracted folder contains the firmware (File name: 6D000114.FIR, File size: 21,276,940 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese).
    Before starting the firmware update operations, please confirm the contents of the download, and carefully read through the firmware update procedures.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Viewing selected focus points from RAW file in Lr5 ?

    Why doesn't Lightroom have a plugin or option available to view the focus points that were used in the original photo?
    The info is stored in the metadata and shows up for in-camera photo review but it does not show up after  .nef file is converted to .dng in Lightroom. This is a very useful tool that could easily be implemented in a future Lightroom upgrade.

    elie-d wrote:
    Might be a good area for a third-party plugin (hint, hint).
    Luc Renambot had a working prototype (on Mac, for one model at least - maybe more) but never reached the finish line for some reason.
    PS - exiftool can decode focus point info for most cameras, so it's not a matter of difficult-to-acquire or missing info.
    Maybe just not quite enough bang for buck - dunno.
    Work-around for mean time (Nikon example) - keep ViewNX open and invoke script to open file in ViewNX if you wanna view focus point(s) - examples:
    Simple Lightroom script:
    no plugin required, but if you prefer plugin:
    One keystroke sequence and you're there - focus points a-blazin'..
    Also, ExifMeta makes focus points available for lib filters and/or smart collections - all cameras (supports custom decoding in case you want to create a text pattern which mirrors graphical representation, or just make it easier to read..).
    Not as convenient as you'd like - I know...
    ~R.

  • Different schema group for one vendor

    Dear all,
    We come across scenario,Where a vendor import material for us and at same time
    he also acts as a dealer.Here it requires two schema groups for a vendor.
    One possible solution is two different vendor codes for same vendor.
    Here i come across this answered link
    Vendor Schema group
    How to do it through partner functions ?
    or
    Any other solution for it ?
    Thanks
    Jeyakanthan

    Hi
    You can achieve this requirement by using vendor subrange. You can have morethen one subranges for same vendor. It will allow you to have more than one set of purchasing data in vendor master which includes schema group and terms of payment....etc.. You need to create vendor subranges from purchasing view in extra and in additional purchasing view.
    The below link wil help u to understand the Vendor subrange:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/e2/f3333956bd9f05e10000000a11402f/content.htm

  • I have 2 point security for AppleID. My iPhone 4S is listed as my trusted phone to text. No tel. no. is given. I am updating to iPhone 6Plus with same tel. no. Do I need to change anything for the sign in verification?

    I have 2 point security for AppleID. My iPhone 4S is listed as my trusted phone to text. No tel. no. is given. I am updating to iPhone 6Plus with same tel. no. Do I need to change anything for the sign in verification?

    Of course You can also add your iPhone telephone # as a trusted device.
    This way when you insert your SIM card into any phone, Apple will automatically recognize your cell phone # as a
    trusted device (may be handy if iphone breaks but you insert SIM card into another phone).
    HOWEVER:
    Having also your iPhone as a trusted device, is convenient if you travel and use a different SIM card
    at destination. This way you can still use the iphone for verification, even though you are using a different
    phone #.
    Regards

  • Looking at FOCUS POINTS changes Time and Date

    When I select VIEW FOCUS POINTS it changes the Time and Date information in the Metadata. I have seen it happen twice now. The images were taken with a Nikon D90 while in Australia. The first time that I noticed this I was in Hawaii and just looking at the FOCUS POINTS changed the Date and Time to Hawaii time. It happened again in Maryland and the time zone was changed to Eastern Daylight Time. To put the images back in the proper place I have had to change the DATE and TIME.
    Has anyone seen this?
    Roger

    Thanks Tony,
    Did you try this:
    Shoot a photo with your camera set to your local time.
    Import into your Mac set to the same local time.
    Quit Aperture
    Restart
    Set the time on your Mac to another time zone.
    Open Aperture.
    Open the photo.
    View the Focus Points
    Then see if the time metadata is changed.
    Mine changes and the place of the photo in the line-up of my folder changes.
    It still does it after I updated to Aperture 3.0.3 from the 3.0
    I know this is a lot of steps in the test process, but this is how it happens for me.
    If this doesn't work I'll have to look into a new Nikon for you and a flight to Hawaii.
    Cheers,
    Roger

  • Freeze up during clip capture with random change of in and out points

    Having BIG problems capturing DV footage which began late last Fall. While performing a capture (assigned clips) footage would go down for a few seconds then would freeze (picture only, the audio continued) then after several seconds the picture would "catch up" and continue.
    Found a solution here in the FCP forum where I had my firewire drives "ignored" by SPOTLIGHT by listing them in the privacy selection. Worked and moved on.
    I have a project now where the problem has come up again. Once again during a clip capture it did what it did before - but now it ignores the assigned in point (audio but no video and almost consistently delaying it by 9 seconds into the capture) then freezes (at the assigned outpoint - sometimes) then continues to play on (audio only) then resumes (again catching up) then stops announcing a SUCCESSFUL CAPTURE. When the clip is selected to preview it plays back from the incorrect in point, freezes, then plays until the catch up - with now the audio out of sync. More craziness because now the log information now has changed: the MEDIA START & END information is not what was inputed so the DURATION TIME is now different and sometimes it adds a MARK OUT point (!?). I rarely use the CAPTURE NOW function but even trying that the footage still freezes up and goes out of sync.
    I worked the SPOTLIGHT routine again with no change. Have completely optimized my system drive and external hard drives using DISKWARRIOR 4.1
    I accept all the auto software up dates that come through UPDATER and see that I received a updated Quicktime version 7.5 on 13 June 08. I also noticed that I don't have CLASSIC OS 9 supported and seemed to have read here about something about FIREWIRE DRIVERS that maybe missing?
    Was thinking of upgrading to 10.5 to see if that helps - but unsure about my FCP version/compatability...
    So, here I sit frustrated since I have used FCP (which I LOVE) for quite a few years with great success - this is crazy! OF course, I have a project which deadline is looming!
    Any ideas?
    Much appreciation..
    Here's my computer stats:
    G4 Powerbook
    OS 10.4.11
    FCP 5.0.4
    QT 7.5
    Sony DSR-11 recorder/player
    4-Firewire Drives with 20gigs of space available

    So far have done a workaround to digitize my DV elements through iMovie. Not pretty. I string together the selected/import clips (in this case from interviews), assemble them in sequential order on the time line with small breaks of black in between, then export the timeline as DVCPRO/DV-NTSC quicktime file. Take that file into my FCP then segment out the clips on the time line, make each segment an independent clip so that I can name them. Not pretty but it works - miss having the logging data going through FCP log and capture.
    Still waiting for any other solution to my situation - thanks!
    John

Maybe you are looking for

  • Mac keeps freezing. hold down power until computer turns off.

    My brand new macbook pro 13".... keeps randomly freezing up while on the internet, on legitimate sites. A black box pops up and says: You need to restart your computer. Hold down the power button until it turns off. So I do this, turn it back on, and

  • Schema validation

    We are migrating from 10g to 11g but seem to be getting schema validation errors. This did not happen on 10g - can I turn this validation off in 11g.

  • Flash-html-textfield / links in a MIAW?

    Hello folks, i have a problem that freaks me up: SETUP: within a director-movie (main movie) i load a second director-movie as MIAW (second movie). within the second movie i have a swf-sprite (swf movie) that contains a html-textfield. now i try to p

  • Failed to find algorighm ID from registry. Use default algorithm.

    Hello, I checked the smsdpmon.log on one of my Distribution Points and i saw the failure: Getting site code SMS_Distribution_Point_Monitoring 19.08.2014 11:55:00 11444 (0x2CB4) Getting algorithm ID SMS_Distribution_Point_Monitoring 19.08.2014 11:55:0

  • Retry logic for TCPIP eway, when backend system is down

    I am a newbie in JCAPS. My requirement is to read a text file and then send it contents through a socket connection to backend system. The stream retrieved back from backend system (via socket connection) is to be stored in Oracle DB. My Approach: I