Folder and ! - i need someones help!

from looking at previous posts seems this is a pretty common problem...
my ipod is showing the folder and exclamation mark, and isnt recognized by itunes or the updater...
is there anything i can do before paying for it to be fixed?
please someone help!

See this.
Changing the display language.
Once you've done that, post back and tell us if you have any further problems.
The rotating circle means the iPod is communicating with your computer. Normal to see this whilst it's either transferring songs, or when you first connect it.

Similar Messages

My switch Linksys srw224g4 has problem and I need someone help

Hello,
My switch Linksys srw224g4 has problem that it keeps rebooting continuously and cannot bootup successfuly. Can someone tell me how to fix this problem? Firmware version is 1.2.2b , boot version is 1.0.2
Here is console capture:
==================
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.2 Built 17-Aug-2006 14:55:46
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2b Date 20-Mar-2007 Time 11:44:49 ***
HW version is 00.03.00
Base Mac address is: 00:1d:7e:74:b6:14
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
LZMA: Decompressing file failed!
HOSTG_rscode_file_load: could not load file
Device configuration:
Slot 1 - SRW24F4G HW Rev. 0.2
Tapi Version: v1.3.3.1
Core Version: v1.3.3.1
01-Jan-2000 01:01:09 %SYSLOG-F-OSFATAL:
L FATAL ERROR: ROOT: ABORT DATA exception
***** FATAL ERROR *****
SW Version : 1.2.2.16
Version Date: 20-Mar-2007
Version Time: 11:44:49
Instruction 0x121fc0
Exception vector 0x10
Program state register 0x20000013
***************** SYSTEM RESET *****************
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.2 Built 17-Aug-2006 14:55:46
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2b Date 20-Mar-2007 Time 11:44:49 ***
HW version is 00.03.00
Base Mac address is: 00:1d:7e:74:b6:14
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
LZMA: Decompressing file failed!
HOSTG_rscode_file_load: could not load file
DelScr fatal Error: Invalid Variant type01-Jan-2000 01:01:03 %SYSLOG-F-OSFATAL: DelScr fatal Error
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 1.2.2b (date 20-Mar-2007 time 11:44:49)
***************** SYSTEM RESET *****************
Thanks,
Tien

Hi,
Please follow the steps in this link to reload the image:
http://www.cisco.com/en/US/products/ps9967/products_qanda_item09186a0080a36371.shtml
And this is the link to download boot code 1.00.86:
http://ip.gliebetronics.com:800/firmware/Linksys%20SRW2024/Firmware/
Hope this help.

Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server. This just started happening. When I open a file indesigns is creating a textfile in the same folder? I need some help on this.

Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server. This just started happening. When I open a file indesigns is creating a textfile in the same folder? I need some help on this.

Ask in the ID forum and be much more specific about your configuration. there could be any number of reasons why manifests, temp files or restore files are created.
Mylenium

I have OS X 10.5.8- I need tunes 11.1-requires OS X 10.6 and older-Can someone help?

I have Mac OS X 10.5.8- I need tunes 11.1- requires OS X 10.6 and older- Can someone help? Or can I just UN Do my recent update on my !Phone 4S?-I can no longer Sync my Iphone to my MAC.

It depends on whether or not your Mac is Intel powered.
If it is, you can upgrade to Snow Leopard for $19.99 http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
If it isn't... your troubles with the Mac are just beginning. As time goes on, there will be more and more things you find you can no longer do with it.

Some of my photos in iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?

Some of my photos in Iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Iphone 4s all apps are disappear including setting, contacts, call icon and etc. can someone help me?

I am currently using iphone 4s , i didn't update the latest IOS 7.1 (I forgot i have updated which ios 7) . I can't go in to a particular apps, so i restart my phone. After I restart my phone, all apps are disappear including setting, contacts, and call icon and etc. can someone help me? The phone now only remain two apps. I try to search using the phone serch engine but when i click on the result, there is a message pop out as: Unsupported URL

Swipe back (right to left) to the home screens that contain the rest of your apps.
Failing that, reset the phone: hold down Sleep and Home buttons until the Apple logo is displayed. No data is lost.

Need someone helps for several Problems on my 9630 Tour

Hello,
Well, these are list of problems with my 9630 Tour, and I need some helps to solve these :
1. My 1st problem is, everytime my 9630 started its also a message appears : "uncaught exception index 8 >= 8"
2. And I also realized that some missing application happened. My m-Banking application (already re-installed well) but it also lost of SMS icon. So the result is, everytime I sent an outgoing SMS I couldn't save it. And I have made a test to sent SMS from my other number to this 9630 device, but 9630 couldn't show that any incoming message, even my other device has given me notification that message has been delivered.
3. Its also often shutdown suddenly by itself, or its shutdown upon charging
4. Charging tasks sometime couldn't be well charged. And finally I realized that my device has off in the middle of charging task, it may caused of charging wasn't recharge the device very well
Hopefully I can read your kindly solution on those problems happened. Thank you for your prompt response.
Anwar Hussein

Hi and Welcome to the Community!
I actually think that all of your issues are related, and rooted in the same problem...OS corruption or hardware failure. But, before you begin, please be sure you have a good backup...see the link in my auto-sig on this post for instructions for that process.
Then, at the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT4623 Hi there , I have ipone3GS it is locked and I need your help to unlocke it as soon as possible .

Hi there ,
I have ipone3GS it is locked and I need your help to unlocke it as soon as possible .
IMEI : 01 299500 378415 1
I am waiting for your help for unlocke it to use it soon .
Thank you for understanding my situation .
Regards
Sultan Alsharari

Could you please give me their email to contact them.
I am waiting for your replay .
Thank you
Sultan Alsharari

Goo night, I have Nikon D810, and i can not see the raw photos on lightroom and Ps, could someone help me?

Good night, I have Nikon D810, and i can not see the raw photos on lightroom and Ps, could someone help me?

Good morning,
Thanks for your message, the versions are LR 5 and PS6
2015-02-24 21:31 GMT+00:00 John Waller <[email protected]>:
Goo night, I have Nikon D810, and i can not see the raw photos on
lightroom and Ps, could someone help me? created by John Waller
<https://forums.adobe.com/people/John+Waller> in Photoshop Lightroom - View
the full discussion <https://forums.adobe.com/message/7226636#7226636>

I need someone help me about "Call Failed".

Excuse me. I live in Taiwan and my english is poor.
I have a strange problem.
When I receive a phone call or call out, I press the "Speaker" to talk then my phone shows "Call Failed" every time.
I try to restore my phone, but the "Speaker" still don't work.
Is this the firmware or hardware problem?
Have someone the same problem?
(My phone is iPhone 3G 16GB, Model MB500T, Version 2.2.1, Modem Firmware 02.30.03)
Please, I need your help.

I live in Taiwan, but I bought the iPhone in Italy.
So the agent of Taiwan don't fix or replace it.
I feel so sadly.

Hello, im new to mac and I need some help with a java problem.

Hello, im new to mac. I just need someone who can help with a problem ive come across when playing online games that run java. The game is arcanists. its on the funorb website. really fun game and i love it, but i cant play it without my screen keep scrolling or my character not responding at all. please get back at me ASAP. thx apple friends!

FF has an extention that can be used to increase the conection speed. Its called Tweak Network 1.1 I see a difference on my iMac G5. Its not huge but it may be a big difference on yours.
http://www.bitstorm.org/extensions/tweak/

Just got a new printer and i,m new to all this and i need some help please

Hello everyone since i,m new here and i,m trying to fined out how to fined how to get the printer claim code for my new printer as this is my first time useing 1 please could someone help me fined it as its doing my head in.
My printer is a HP Deskjet 1510 All-in-one series . Thank you

Hi,
Is this the one ?
http://h10025.www1.hp.com/ewfrf/wc/document?cc=au&lc=en&docname=c03775352#N132
No, it doesn't have claim code. Only printers with ePrint enable/ready have claim codes.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

IIOP and firewalls - need urgend help!!!

Hello there,
we have problems connecting with a Java applet to BC4J deployed as EJBs in an OracleJVM (Oracle9i AS 1.0.2) over IIOP throu a firewall. Is anyone out there who can help us? We need urgent help!!!
Thanks in advance!
Stefan

Are ports 1521 (for JDBC) and 2481 (for IIOP) open on your firewall? That's what my problem turned out to be.

Need to do a remote wipe of my iphone - stolen 24 hrs ago and . Need urgent help on this. Thanks - Pinaki

Need to do a remote wipe of my iphone - stolen 24 hrs ago Need urgent help on this. Thanks - Pinaki
< Personal Information Edited By Host >

Follow the steps in this article:
iCloud: Erase your device
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud), then click Find My iPhone.If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.If you don’t see Find My iPhone on iCloud.com, your account just has access to iCloud web-only features. To gain access to other iCloud features, set up iCloud on your iOS device or Mac.
Click All Devices, then select the device you want to erase.If you have Family Sharing set up, your family members’ devices appear below their names.
In the device’s Info window, click Erase [device].
To erase:
An iOS device: Enter your Apple ID password. If the device you’re erasing has iOS 7 or later, enter a phone number and message. The number and message will be displayed on the screen after the device is erased.

Hi I'm having trouble in question No. secret and secret answer and I need to help

Hi
I'm having trouble in question No. secret and secret answer and I need to help

Hello alamri 2014,
Thanks for the question. It sounds like you wish to reset your security questions. The following resources may assist you in doing so:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
What should I do if I don't remember the answers to my Apple ID security questions?
Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
If you are confident you can't remember them, try one of the following:
If you have three security questions and a rescue email address
     - sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID password
     - sign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID password
     - contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
If you do not see the option for resetting your questions with a rescue email address, see this excerpt:
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Additional Information:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thanks,
Matt M.

Folder and ! - i need someones help!

Similar Messages

Maybe you are looking for