Folder/File transfer help

I'm trying to transfer files/folders from an old macbook to a new one, but when I connected the new to the old via firewire, finder was not able to locate them. The folders I am looking for are placed on the sidebar of the old mac. The only folders finder displays are the generic downloads folder and desktop of the old macbook. Even when searching for specific files within said folders, no results are found. Is it a user access problem? Do I need to alter some settings? The only way I can access the old macbook is via firewire because the video card burnt out. Any help in the right direction would be appreciated. Thanks

Your external hard drive is probably in NTFS format, which is read-only to the Mac OS. If the harrd drive will be used only with a Mac or Macs, reformat it in Mac OS Extended format using Disk Utility. If you must use the drive with a Windows PC too, leave it in NTFS format and install Tuxera NTFS or NTFS-3G on the Mac to enable the Mac to write to the disk, or else put the disk in Mac format and install MacDrive on the PC.

Similar Messages

The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. PLEASE HELP!!!

I have been trying for over 2 weeks now trying to get my iTunes to open up so I can use my iTunes but I have not had any luck since I up graded to the new itunes. I have tried uninstalling (all apple programs) and reinstalling and nothing seems to work. Everytime I try to open my iTunes I receive the following message - The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. Please help as I'm getting very frustrated and want to throw every apple device in the trash!!!
FYI: I thought about getting the iPhone but since I"m not having very good luck getting assistance with my iPod/iTunes I think I will rethink my decision.

Found the solution.

My iPod no longer appears as folder/file in Itunes when connected. Library, genius, playlists, etc. are present, but there is no longer cross reference with the iPod itself. Help!?

My iPod no longer appears as folder/file in Itunes when connected. Library, genius, playlists, etc. are present, but there is no longer cross reference with the iPod itself. Help!?

I just tried it again and this time a different message showed up "The iPod 'name' cannot be synced. The required folder cannot be found." I have no clue what folder it could be talking about.

Folder/file permissions stop bluetooth transfer from my iMac to to MacBook Air --- Both on Yosemite 10.10.1

e.g. on iMac have 50 photo files in a folder ... folder can not be transferred to my MacBook Air via bluetooth - receive error message "Items can’t be copied to “Desktop” because you don’t have permission to read them."      I change the folder permissions on iMac (get info>>assign others to r/w permission), and also change the folder to a shared folder.   I still get the same message on MacBook Air.
I have not tried manually changing 50 individual file permissions in the folder ...eeegads!
Single files transfer properly between both computers ....after permissions are manually changed.   What's going on?   I never had to even say the word "permissions" pre-Yosemite.   Any advice would be greatly appreciated

There are apps such as Simple Transfer which allow you to transfer photos to/from your iPad and your computer via your wifi network - they will copy into the Camera Roll album in the Photos app on your iPad

File transfer rate is very bad on my new W520. Help needed....

Hello,
I have a usb 2.0 hi speed flash drive which has transfer rates of 15Mb/s. But When I am trying to copy a movie (under 3 gb) from my W520 to the flash drive the speeds that I observe is 6Mb/s which is very slow. Initially, I though I have an issue with the flash drive but when I used my 3 year old dual core xps laptop to copy a file, I observed the speed of 15 Mb/s. If not high speed atleast I am expecting to see 15Mb/s with my W520. Really wierd!!!
BTW... I am running my W520 at "Maximum Performance" power profile. And I see my clock speed always at less than 1 ghz while copying the file but when i do other stuff i see my clock speed hitting 3.2 ghz....
Any thoughts on whats going on???
My system is Thinkpad w520 2710 with 8 gb of ram....
Thanks
Robustm

Hi robustm
From what I know, the problem lies with Windows 7 (throttling)
How about copying to USB drives? the speed should be around 30+ - 60MB, depending on the file type also.
1. You could also try updating Intel Chipset driver
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=816&DwnldID=20019&ProductFamily=Chipse...
et+Software&ProductProduct=Intel%C2%AE+Chipset+Software+Installation+Utility&lang=eng
2. You could try using SpeedGuide TCP Optimizer, which resolves Network Throttling and Slow file transfer problems for some. (Set as Optimal)
http://www.speedguide.net/downloads.php
3. You could go to Computer Management (compmgmt.msc), Device Manager, Disk drives, double-click your USB device, policies, set as Performance.
* Note: This may require you to Safety Remove the device, due to caching for performance.
Hope it helps
Happy Holiday
Peter
ThinkPad: W520 (4284-A99)
=============================================
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve
Mark it as solved if the solution works for you, so it could be reference for others in the future
Dolby Home Theater v4 (Essential/IdeaPad/ThinkPad)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62...

Used the file transfer software from Apple to move music and photos from PC to iMac and can't find the files on iMac even though it was "successful" any help?

Used the file transfer software from Apple to move music and photos to iMac. After several hours it was "successful" but I can't locate it on the iMac. Any ideas for the rookie?

The music should be in iTunes and your photos should be in iPhoto. What happens if you launch those applications?
Best of luck.

HT4796 Need Help with Migration file transfer

My pc connection to my mac during the file transfer got lost,
so I reestiblish the connection when I woke up from bed
now it seem that the mac is frozen on one section of the transfer and
pc attempting to connect is still runing for hours now and hasn't connected
I need help

Have you tried restarting and then attempting to connect?

Creative Zen USB and File transfer probl

Am the unhappy owner of a brand new Creative Zen touch 20gb mp3 player which apparently works with usb 2.0. After installing the software which came on the cd (file transfer software and nomad explorer) the Zen appears to get recognised by the pc with no problems when i connect via the usb cable. The Zen also displays 'docked' which is all very well. However if i select say 0 tracks to download to the player the xp progress bar seems to halt at around 60-70% and eventually the program (nomad) complains that the operation cannot be completed. I noticed that the small hard dri've in the player feels as though it is 'spinning down' around a similar time to the message being displayed. If at this stage i refresh the players view in nomad explorer it can be found with no problem....its just i cant write to it until i unplug the usb from the zen and reconnect. I spoke to creative who told me that because my pc (in system devices) reports that my usb is an 'open host' adapter...this means it cannot supply adequate power to the player....but surely USB2.0 is USB2.0 and if something claims to be USB2.0 compliant that would be the end of the story? The usb card im using is a usb 2.0 pci card and is also pretty new. Any help/ideas would be greatly appreciated.
I have tried various usb ports, usb and2 conections ( I have both), various cables and combinations and the same happens. I have also tried win xp and win98, and other disks I have with the same result. I have managed to transfer 20 os so mp3s (a small proportion of those I have been trying to transfer)after 3-4 hours hard labour but never the contents of a full folder. After a proportion of the files are transferred then Zen touch becomes 'busy' or 'not connected'. Obviously there is no way I can continue like this and it will have to go back.
I have tried the slightly newer driver but this did not work at all and I had to roll back to the one that came on the CD. I feel that I have given it a fair shot trying all the workarounds.
Is is a USB power problem? Should a powered usb hub cure it's If so why?
But is this surely is Creative's problem. It is obviously a known issue but what are they doing about it's Putting out Zens which are prone to this problem is not good practice. Any solutions out there?

Hey,
If you tried it on a friend's computer and you're still having problems then it may be a problem with the Zen. Before you call or e-mail tech support, here is what they will tell you do to first before they really get in depth with helping you. Go into Rescue Mode (there is an explanation on how to do this at the top of the forum) and do a disk clean up. After that, try it. If that doesn't work then click the reload OS option which will take the firmware (like windows to your PC) off the Zen. Don't worry you can easily put it back on. Go to Support>Downloads>select Zen Touch, etc, etc. and download the latest firmware and run it. Hopefully that will fix it....
I had some connection problems myself with my ZT as soon as I got it as well. and simply reflashing the firmware fixed and now I love my Zen. I hope everything works out for you.
Wilco

What are the folder/file names of PSE12 catalogs?

I'm curious about what files/folders are created by PSE 12 when setting up the original catalog and then each subsequent catalog. Also, what files/folders are created for the PSE backup and is there a default folder/file structure tied to the catalog - or is it wholely separate?

LinusF wrote:
I "know" about the Program Data ....catalogs/[my catalog] location. Is there any file necessary to the catalog which is NOT there?
The catalog folders contain everything that is necessary for the organizer. The only thing you might consider is to take a note of your preferences settings. The backup folders also contain everything necessary; the only difference is that it may take some time to rebuild the 'cache' files automatically after the restore.
Put another way, I am moving many, many files off my current C: drive in order to install an SSD. I want to make super sure that I catch everything PSE may have stashed here and there and get it out to "safety" before reformatting this disk. Thanks for all the help you've been along the line.
The backup and restore process is highly recommended in your situation, but generally it's not the only way to 'move' catalogs and media libraries. Let's say you have all your media files under a single master folder such as 'My photos', you can use the Folder view (left panel) to drag and drop on another external or internal drive. Your catalog is then updated for the new location.
- advantage : you can check the transfer immediately
- drawback : you must be patient...
That's for transferring your media library, now you can also move your catalog folder, either manually or by using the catalog manager 'move' option.
So, the backup/restore process is not the only way.
If you want to keep only your Elements program on the SSD, I would not store the catalogs there, I'd store the catalogs in custom location in your old reformatted internal drive. You'll need an external drive for the backup. Alternatively, you could move library and catalogs to the external drive, and back to the old reformatted drive as explained above. You might even use the external drive for both purposes...

Oracle.forms.webutil.file Transfer.File Transfer bean not found

I've followed tons of instructions for 2 days to install and configure webutil and I finally have success with the demo. However, when I add this to my own form and use the CLIENT_IMAGE.READ_FILE_IMAGE
I end up with error oracle.forms.webutil.file Transfer.File Transfer bean not found WEBUTIL_FILE_TRANSFER.getMaxTransfer will not work.
What am I missing? Thanks for any help.

Make sure your form subclasses object group webutil.olb, and that webutil.pll is also attached. Make sure that your forms folder contains webutil.plx (a compiled version of webutil.pll). Unless the default config (in formsweb.cfg) includes the entries required for webutil support, you must specify a config that does have these entries. 10g, which comes configured for webutil, provides a config called webutil for this. An example URL might look like:
http://myappserver/forms/frmservlet?form=myform.fmx&config=webutil
There could be other problems, but since you're able to run the demo forms, I'm guessing that what I've mentioned are the first things for you to check.
Hope this helps,
Eric Adamson
Lansing, Michigan

SAP PI ftp FIle transfer one to one with the same filename

Hello all,
maybe sombody ask the same in this forum, but couldn't find any topic regarding these.
Okay:
We have a scenario which have to pick up a txt file from a folder and to deliver to another folder
outside. The file transfer itselfs isn't a problem and works propertly, but we need the same file-
name for the outgoing file. Unfortunaltey we have huge different filenames..
So, my question would be, what for possiblities we have to sure, that if we can deliver the
file which the same filename as we have in the orginal (source) filefolder.
e.g. file named in source called TEST.123 in the destination should be also TEST.123.
The next file called TEST123.abc should be also in the destination TEST123.abc.
Thanks

Hi friends.
I don't know about if you need still any help. But i think it will be useful for another people who have encountered that problem and looking for the solution.
The solution is pretty simple for case if you are going to some file by scenario FTP - to - FTP without interface mapping. I was able to create simple example ant put it on my site to let you use the portable short instruction with screen shots and highlighted marks that help you understand it more clear. Indeed you don't need any udf if you wish to repeat that example in your real scenario. Link is HERE
Shortly you have to do the next:
1) for the sender adapter in tab "Advanced" switch on the check-box "Set Adapter Specific Attributes" and check that "File name" is switched on as well.
2) for the receiver adapter you have to repeat step 1 as well. Plus you have to change setting on the tab "Processing". On that tab you need to change "File Construction Mode" into "Create" and than you have to switch on the check box named as "Overwrite Existing File".
That's it.
Thank you, i hope that is help.
Sincerely, LukCAD.

Files transfer to Windows PC

I have a power PC with system7 installed. I wonna transfer all data files to a windows PC. And I have some Aldus Page Maker files in there and I wonna convert them to the Adobe PM. How can I do this. I am a newbie for the MAC. Please help me. My email is ruwan.alahakoon (at) yahoo (dot) com

There are several ways to do this.
Some of the PowerPC Macs had built-in Ethernet when delivered. See also the technical specifications. An external AAUI to RJ-45 transceiver may or may not be needed, depending upon the Mac in question. If you wish to use Ethernet, please post back with additional information about the computer model.
All PowerPC models should have an operating system with PC Exchange (look for it in the Control Panels folder). This means that PC-formatted floppies can be used for transfers. However, the file size limit will be somewhere around 1.3 MB.
You could connect a MiniDIN-8 serial port (Modem Port) on the Mac to a DB-9 serial port of a PC by combining a Macintosh hardware handshake modem cable (MiniDIN-8M to DB-25M) with a standard PC null-modem cable (DB-25F to DB-9F). A terminal emulation program with file transfer capabilities (such as the communications section of ClarisWorks on the Mac and HyperTerminal on the PC) is used on each computer.
If both computers have a modem, transfers via terminal emulation software can be carried out over the public telephone network instead (two lines required, one for the Mac and one for the PC).
A variant would be a direct modem-to-modem connection (in principle as in KB article # 22229.
With a modem for the Mac, and Internet software (if not already on the hard disk, it is not difficult to install a couple of small programs), you could use e.g. email for transfers.
The transport of an unprotected Macintosh file to a PC will result in loss (or damage) of the resource fork (that is, one of the Mac file parts). The remaining data fork is, usually, sufficient for documents. Check the Save as dialogue on the sending Mac and compare this to the Open dialogue of the receiving PC. Try to find a "common denominator" file format.
Jan

File transfer issues in Skype 6.22?

Recently updated to 6.22 and lost the ability to decline incoming files. In previous versions you had to options - accept or decline, now the only options seem to be "accept" or ignore and then the file request just sits in the chat window as incomplete. Is this a setting that can be changed or do I need to stay annoyed by it forever?
Moreover: After accepting a file transfer, you used to be able to click the "view in folder" link and open the file location. This also seem to be removed. Comments on this?

...also you can just start by opening the conversation with the first member of your future group you want to create and then simply use the "Add contacts" button on top right to add the other members. This way a new group conversation will be created as well.
We are right now working to update this FAQ to reflect that information: https://support.skype.com/en/faq/FA1005/how-do-i-start-a-group-instant-message-in-skype-for-windows-...
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

File to file transfer

hai
i need the steps to be done for the scenerio file to file transfer,
as if i am transfering a file from one R/3 to another R/3 system.
what are the configuarion that is to be done for it?
plz send me the detail steps.
thx in advance. its urgent.

Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File

Measure file-transfer speed?

Hello to all of you!
I would like to know if there's a way to monitor the speed during a file transfer (either from the internal disk to an external, or from an internal folder to another internal folder). I'm not referring to online file tranfers (eg. FTP).
To help describe my question even more, lets say I'm transfering 5GB of data. I can see the estimated time in the progress window, but I'd like to view the speed at which the data is transfered.
Any tips?
Thanks a lot!

Efthymis , It really depends on just what you want to measure.....'Benchmarking'- which is what you are trying to do is (truly) a complex art - IF you want meaningful results...there are various special-purpose tools (you CAN'T rely on the computer's/program's estimates because they tend to be sec-by-sec and don't allow for start-up,overheads, etc etc and are usually quite misleading)...)
You WILL get different results if you transfer 100 * 1MB files compared to those you get if you xfer one 100MB file, for example.
Most accurate test of speed is a set of known filesizes:e.g 100meg, 500meg etc, a stopwatch and a quick hand.
For an accurate 'real life' test,include a folder containing 3 or4 real-life filesizes -e.g. a few 2kb, a few 100kb, a few 500k, a 1000k, a cpl of 5 meg, DUPE That folder a few times, place results in yet another then copy THAT somewhere whilst armed with a stopwatch
Otherwise, as I said here, there are various tools (see versiontracker and try a few of those)
best of luck

Folder/File transfer help

Similar Messages

Maybe you are looking for