Folder Redirection policy is not applied to a user, when the server target is changed, but works after resetting the windows profile.

Folder Redirection policy is not applied to a user, when the server target is changed. 
After server target is changed via group policy, when user login  (roaming profile)first time, the the new server target has not been applied, instead it's pointing to the old folder redirection path.
But if we reset the windows profile (roaming ), the new folder redirection works, can you please specify a solutions that the new folder redirection works when the user login for the first time. so it reduce the time on resetting users profile.
it seems that we need to delete the old folder redirection path from the user profile (roaming user profile) via group policy or similar solutions..
Many Thanks

>   But when the specific users login they all get the same error, it
Is the old server removed from the domain? Seems so - or some other
authentication related issue, hard to tell from here...
> seems that the roaming user profiles still keeps the old server details,
Yes - if you change redirection targets, FR moves content from old to
new, and only if this ends sucessfully, it will update the redirection
target.
Make the old redirection target accessible to the user and you'll be fine.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

  • User Group Policy Settings not applied to new user profiles at first logon

    Good Afternoon,
    We have an issue that occurs to a new user when they first log on to their machines. They log on and a new profile creates from the Default User Profile. We can see that a number of our Group Policy Settings applied as "User Configuration" are
    not applying.A log off and back on is required before the policies apply.
    Any thoughts to this behaviour please?
    Regards
    LeeB
    Lee Bowman MCITP MCTS

    Hi,
    How about your problem now? How many system encounter this problem? Is all policy couldn't be applied? Is there any feedback when using gpresult to check policy applied status?
    As Group Policy applies after user identity authentication, generally speaking, user logoff and back doesn't helpful with this problem.
    When this problem occures, have you checked event log if it identify this problem?
    Roger Lu
    TechNet Community Support

  • Is it possible to manually setup a Folder Redirection Policy on SBS 2008 for one user? Also are you able to set up folder redirection on a different server than you have SBS 2008 on?

    I have a SBS 2008 DC I would like to be able to change the Folder Redirection to a different server.  I also would like to be able to test with one user.  I read on the forums that it is best to use the wizards for SBS2008.  The only problem
    I have with using the wizards is that I am unable to test and I am also unable to use a network share for my redirection location.  

    Hi,
    I am sure you would get some help from :
    http://blogs.technet.com/b/sbs/archive/2010/10/08/folder-redirection-in-small-business-server-2008.aspx
    https://social.technet.microsoft.com/Forums/en-US/448583ca-471e-4a0c-9d26-aa9181e73962/folder-redirection-changing-location?forum=smallbusinessserver
    User setting can be found:
    Windows SBS Console > Shared Folders and Web Sites > Shared Folders - in Tasks panel click on Redirect folders for user accounts to the server.
    Under Folder Names Select folder(s) you want to redirect (e.g. Documents).
    Under User Accounts select accounts you want to have folders redirected.
    Click OK
    Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Windows 8 - Folder Redirection policy missing from GP Results.

    Hi guys! This has been giving me a hard time the last day or so.  I've got some Win8 machines in our 2003 domain. I've got some GPO's applying with WMI filtering for win8 machines. Mostly these are ok, but i'm having a huge problem with Desktop Folder
    Redirection. 
    After a fresh build and first login, everything works fine. Drive mappings are all there and the Desktop is redirected to to users home drive on the file server. This is being done with Advanced settings using group membership and set to "Create a folder
    for each user under the root path" \\dfs1\users. This location is correct and permissions are fine of course as everything works for a while.
    After a little while or some unknown event, this redirection stops working.
    check these two screengrabs. These are different users on different machines. The machines are identical, are in the same OU and have the same image. The users are different but have the same group memberships and are in the same OU. 
    This is a working machine. Not the Folder Redirection component was processed and the Policy exists.
    This machine is not working. Folder Redirection is processed, but the Policy is missing. Running a gpresult /v on this machine yields: 
     Folder Redirection
         N/A
    It was working fine yesterday and this morning. Now at some point a policy refresh stopped it from working. Just trying to figure out what! These are the exact settings currently in place for our win 7 machines which all work just fine. Going a bit crazy
    tbh and usually when i post questions i figure it out shortly afterwards anyway huhu. Any help is appreciated! 

    well I though this issue was gone when I switched to a new Task Sequence in SCCM every machine that was built with that was working fine with Folder Redirection happening as it's meant to be. That was for about a week, now it's back to not working.
    here's a snippet of the gpsvc.log file pertaining to FD.
    GPSVC(43c.11f4) 08:59:47:231 ProcessGPOs(User): Processing extension Folder Redirection
    GPSVC(43c.11f4) 08:59:47:231 ReadStatus: Read Extension's Previous status successfully.
    GPSVC(43c.11f4) 08:59:47:231 CompareGPOLists: The lists are the same.
    GPSVC(43c.11f4) 08:59:47:231 CompareGPOLists: The lists are the same.
    GPSVC(43c.11f4) 08:59:47:231 GPLockPolicySection: Sid = S-1-5-21-2272506071-1675830810-3538462175-3230, dwTimeout = 30000, dwFlags = 0x0
    GPSVC(43c.11f4) 08:59:47:231 CGPApplicationService::LockPolicySection.
    GPSVC(43c.11f4) 08:59:47:231 WaitForServiceInitialization: Beginning WaitForSingleObject.
    GPSVC(43c.11f4) 08:59:47:231 WaitForServiceInitialization: Completed WaitForSingleObject.
    GPSVC(43c.11f4) 08:59:47:231 CPolicyCriticalSectionCollection: LockPolicySection called for user <S-1-5-21-2272506071-1675830810-3538462175-3230>
    GPSVC(43c.11f4) 08:59:47:231 SID = S-1-5-21-2272506071-1675830810-3538462175-3230
    GPSVC(43c.11f4) 08:59:47:231 bMachine = 0
    GPSVC(43c.11f4) 08:59:47:231 Global Sync Lock Called
    GPSVC(43c.11f4) 08:59:47:231 Writer Lock got immediately.
    GPSVC(43c.11f4) 08:59:47:231 Global Lock taken successfully
    GPSVC(43c.11f4) 08:59:47:231 ProcessGPOList: Entering for extension Folder Redirection
    GPSVC(43c.11f4) 08:59:47:231 UserPolicyCallback: Setting status UI to Applying Folder Redirection policy...
    GPSVC(43c.11f4) 08:59:47:231 ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
    GPSVC(43c.5d0) 08:59:47:231 CGroupPolicySession::QueueItemForPolicyApplication::-- (Status: 997)
    GPSVC(43c.5d0) 08:59:47:231 CGPApplicationService::UserLogonEvent::-- (Status: 997)
    GPSVC(43c.11f4) 08:59:47:231 ProcessGPOList: Extension Folder Redirection returned 0x0.
    GPSVC(43c.11f4) 08:59:47:231 ProcessGPOList: Extension Folder Redirection status was not updated because there was no changes and no transition or rsop wasn't enabled
    GPSVC(43c.11f4) 08:59:47:231 CGPApplicationService::UnLockPolicySection.
    GPSVC(43c.11f4) 08:59:47:231 WaitForServiceInitialization: Beginning WaitForSingleObject.
    GPSVC(43c.11f4) 08:59:47:231 WaitForServiceInitialization: Completed WaitForSingleObject.
    GPSVC(43c.5d0) 08:59:47:231 Setting GPsession state = 1
    GPSVC(43c.5d0) 08:59:47:231 User SID = <S-1-5-21-2272506071-1675830810-3538462175-3230>
    GPSVC(43c.11f4) 08:59:47:231 CPolicyCriticalSectionCollection: UnLocked successfully
    GPSVC(43c.5d0) 08:59:47:231 CGroupPolicySession::QueueItemForPolicyApplication::++ (bTriggered: 0, bConsole: 1)
    GPSVC(43c.5d0) 08:59:47:231 PolicyApplicationState is True.
    GPSVC(43c.5d0) 08:59:47:231 AsyncThreadsProcessing is False.

  • Group Policy Pref - Mapped Drives Not Applying to One User

    Hi All,
    I’m new to this list, so please excuse any etiquette slip ups.  
    I have three users at a site. All their machines are running Windows XP Service Pack 3 and have client side extensions installed. I created a group policy to map their default drives using GP User Preferences.
    Each of the drives is set to "update".
    As an example of the policy created XML is as follows:
    <Drive clsid="{935D1B74-9CB8-4e3c-9914-7DD559B7A417}" name="H:" status="H:"
    image="2" changed="2009-11-25 05:13:58"
    uid="{8A44D2F4-AAE5-4F43-AEEC-D36F08EA619C}" desc="Maps the users H drive to
    ServerName\users$\%username%" bypassErrors="1"><Properties action="U"
    thisDrive="NOCHANGE" allDrives="NOCHANGE" userName=""
    path="\\ServerName\users$\%username%" label="Home (ServerName)"
    persistent="1" useLetter="1" letter="H"/></Drive>
    and
    <Drive clsid="{935D1B74-9CB8-4e3c-9914-7DD559B7A417}" name="J:" status="J:"
    image="0" changed="2009-11-30 03:52:58"
    uid="{535CD462-A45D-4363-ADA1-2316D5ECC703}" desc="Maps J drive for users to
    \\ServerName\apps" bypassErrors="1"><Properties action="C"
    thisDrive="NOCHANGE" allDrives="NOCHANGE" userName=""
    path="\\ServerName\Apps" label="Apps (ServerName)" persistent="1"
    useLetter="1" letter="J"/></Drive>
    The group policy is applied to an OU for that site. 
    All three users are in the same OU.
    All three users are also in the same “xxsitecode Users” group.
    2 of the users log into their pc and get the mapped drives with no issue, but one user doesn’t.
    There are no other login scripts and the user has no manually mapped drives.
    He does have a H drive mapped using the profile field in his AD object as a temp measure. But every 90 mins any other manually mapped drives are removed by the policy.
    We don’t use roaming profiles
    To trouble shoot I have tried
    -    Reinstalling client side extensions
    -    Re-joining the pc to the domain
    -    Running gpupdate from the command prompt to see if any event logs are generated (none are)
    -    Manually mapping the drives to make sure there is network access etc – I can manually map them/he can access them.
    -    Creating the user a new account, when he logs in using that account he gets his mapped drives on all PC’s
    -    Getting the user to log into a different pc, when he does this he doesn’t get his drives – so it’s not his machine or profile
    -    Manually checking the security on the user object in AD against one of the users who gets their drives mapped
    I'm sure the GP is fine because it works for two other users and the testing isolates his user account as the issue.
    The Policy I’m having issues with is xxxx Mapped Drives/ Printers
    I have posted this issue on the tech net GP discussion groups page, but haven’t had any replies.
    Any suggestions would be appreciated.
    Simone

    What's interesting is that I applied a new GP to users - it has one policy setting and one preferences setting. He only gets the policy setting.. aka he gets the wallpaper but not the homepage.
    Also, Jorke asked me to post the gpresult /z .
    Microsoft (R) Windows (R) XP Operating System Group Policy Result tool v2.0
    Copyright (C) Microsoft Corp. 1981-2001
    Created On 10/02/2010 at 2:19:34 PM
    RSOP results for DOMAIN\USER on MACHINENAME : Logging Mode
    OS Type:                     Microsoft Windows XP Professional
    OS Configuration:            Member Workstation
    OS Version:                  5.1.2600
    Domain Name:                 DOMAIN
    Domain Type:                 Windows 2000
    Site Name:                   SITECODE
    Roaming Profile:            
    Local Profile:               C:\Documents and Settings\USER.DOMAIN
    Connected over a slow link?: No
    COMPUTER SETTINGS
        CN=MACHINENAME,OU=Laptops,OU=SITECODE,DC=DOMAIN,DC=com,DC=au
        Last time Group Policy was applied: 10/02/2010 at 1:06:38 PM
        Group Policy was applied from:      XXXXXADC.DOMAIN.com.au
        Group Policy slow link threshold:   500 kbps
        Applied Group Policy Objects
            Allow Remote Assistance
            au-mdwsus
            Default Domain Policy
            Legal Notice
            Proxy Settings
            Logon as service, operating system
            AU-WSUS
            Desktop Background & Home Page
            Reg Permissions for default desktop
            Local Admin & Local Power Users
        The following GPOs were not applied because they were filtered out
            SITECODE Mapped Drives/ Printers
                Filtering:  Not Applied (Empty)
            Local Group Policy
                Filtering:  Not Applied (Empty)
            AVD Rollout
                Filtering:  Disabled (GPO)
        The computer is a part of the following security groups:
            BUILTIN\Administrators
            Everyone
            Debugger Users
            BUILTIN\Users
            NT AUTHORITY\NETWORK
            NT AUTHORITY\Authenticated Users
            MACHINENAME$
            Domain Computers
            CERTSVC_DCOM_ACCESS
        Resultant Set Of Policies for Computer:
            Software Installations
                N/A
            Startup Scripts
                GPO: Desktop Background & Home Page
                    Name:         image.bat
                    Parameters:  
                    LastExecuted: 7:55:34 PM
                    Name:         swiftdesktop.vbs
                    Parameters:  
                    LastExecuted: 7:55:35 PM
            Shutdown Scripts
                N/A
            Account Policies
            Audit Policy
            User Rights
            Security Options
            Event Log Settings
            Restricted Groups
            System Services
            Registry Settings
            File System Settings
            Public Key Policies
                N/A
            Administrative Templates
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\GloballyOpenPorts
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\GloballyOpenPorts\List
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
                GPO: au-mdwsus
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: au-mdwsus
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\CurrentVersion\Winlogon
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: au-mdwsus
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
                GPO: Desktop Background & Home Page
                    Setting: Software\Policies\Microsoft\Internet Explorer\Security
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\RemoteAdminSettings
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: au-mdwsus
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\RemoteAdminSettings
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: au-mdwsus
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
    USER SETTINGS
        CN=Matthew Luhrs,OU=Users,OU=SITECODE,DC=DOMAIN,DC=com,DC=au
        Last time Group Policy was applied: 10/02/2010 at 1:54:53 PM
        Group Policy was applied from:      XXXXXADC.DOMAIN.com.au
        Group Policy slow link threshold:   500 kbps
        Applied Group Policy Objects
            Allow Remote Assistance
           **** SITECODE Mapped Drives/ Printers - has Gp Pref's that should apply
            Default Domain Policy
            Proxy Settings
            **** Desktop Background & Home Page - has Gp Pref's that should apply
            Local Admin & Local Power Users
        The following GPOs were not applied because they were filtered out
            AU-WSUS
                Filtering:  Not Applied (Empty)
            Legal Notice
                Filtering:  Disabled (GPO)
            Reg Permissions for default desktop
                Filtering:  Not Applied (Empty)
            Logon as service, operating system
                Filtering:  Not Applied (Empty)
            Local Group Policy
                Filtering:  Not Applied (Empty)
            au-mdwsus
                Filtering:  Not Applied (Empty)
            AVD Rollout
                Filtering:  Disabled (GPO)
        The user is a part of the following security groups:
            Domain Users
            Everyone
            Offer Remote Assistance Helpers
            BUILTIN\Administrators
            BUILTIN\Users
            NT AUTHORITY\INTERACTIVE
            NT AUTHORITY\Authenticated Users
            LOCAL
            Computer Account Operators
            Internet Users
            SITECODE Users
            DOMAIN-Public Folders Administrators
            All Email Users
            DOMAINSWIFTEMAIL
            Domain Admins
            Offer Remote Assistance Helpers
            WSUS Administrators
            DHCP Administrators
            CERTSVC_DCOM_ACCESS
        Resultant Set Of Policies for User:
            Software Installations
                N/A
            Public Key Policies
                N/A
            Administrative Templates
                N/A
            Folder Redirection
                N/A
            Internet Explorer Browser User Interface
                GPO: Proxy Settings
                    Large Animated Bitmap Name:      N/A
                    Large Custom Logo Bitmap Name:   N/A
                    Title BarText:                   N/A
                    UserAgent Text:                  N/A
                    Delete existing toolbar buttons: No
            Internet Explorer Connection
                HTTP Proxy Server:   Proxy:port
                Secure Proxy Server: Proxy:port
                FTP Proxy Server:    Proxy:port
                Gopher Proxy Server: Proxy:port
                Socks Proxy Server:  Proxy:port
                Auto Config Enable:  Yes
                Enable Proxy:        Yes
                Use same Proxy:      Yes
            Internet Explorer URLs
                GPO: Proxy Settings
                    Home page URL:           N/A
                    Search page URL:         N/A
                    Online support page URL: N/A
            Internet Explorer Security
                Always Viewable Sites:     N/A
                Password Override Enabled: False
                GPO: Proxy Settings
                    Import the current Content Ratings Settings:      No
                    Import the current Security Zones Settings:       No
                    Import current Authenticode Security Information: No
                    Enable trusted publisher lockdown:                No
            Internet Explorer Programs
                GPO: Proxy Settings
                    Import the current Program Settings: No

  • Print preferences do not apply to CRM users

    When Print Preferences are set for a document type (for example, print 2 copies on Add), they are applied to Professional users, but not to CRM users.  While it seems reasonable to restrict CRM users from changing the print preferences, these are meant to be company-wide defaults and should apply to all users.  I have verified with SAP support that CRM users are not affected by settings in the print preferences.  We are currently using a work-around of setting the preferences in User Defaults for these users, but it is time-consuming and could be neglected when adding a new user.  There is no reason why system defaults should not apply to CRM users.

    Hi,
    I agree with Meinolf. Besides, we can try to configure this setting under Computer Configuration and apply the GPO to the terminal server, in which way all users logging onto
    the server will apply the setting.
    Regarding how to add trusted sites, the following article can be referred to as reference.
    How to configure Internet Explorer security zone sites using group polices
    http://blogs.msdn.com/b/askie/archive/2012/06/05/how-to-configure-internet-explorer-security-zone-sites-using-group-polices.aspx
    Best regards,
    Frank Shen

  • After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2.  After clicking the download button, the screen just turns dark and is frozen.  Any idea what is happening?

    After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2.  After clicking the download button, the screen just turns dark and is frozen.  Any idea what is happening?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • In powerpoint mac 2008, how do i apply a theme to a single slide without it changing other slides' themes in the powerpoint?

    In powerpoint mac 2008, how do i apply a theme to a single slide without it changing other slides' themes in the powerpoint?
    <Edited by Host>

    As PowerPoint is not an Apple product (a lot of Mac users avoid Microsoft stuff) you may get faster and better help by using the MS Office:Mac forums here:
    Office for Mac forums

  • I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

    I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

    What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
    Tell us what network setup you are using..
    If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

  • My wi-fi connection is enabled, however Safari is telling me the server stopped responding.  My laptop is working fine on the same wi-fi network.  I have reset the network settings and still Safari will not open any web pages.  Help!

    My wi-fi connection is enabled, however Safari is telling me the server stopped responding.  My laptop is working fine on the same wi-fe network.  I have reset the network settings and still Safari will not open any web pages.  Help!

    Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding".  I am not able to connect with anything on the Internet.  Frustrating since I am able to connect with my laptop.  Thanks for the suggestion.

  • I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. Is my info safe??

    I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. I only got this number about a month ago. Apparently someone else had the number before because I get texts from his family members wondering whats going on. I got one yesterday and the person didn't seem to thrilled that the number was cutoff and today I got 2 texts about iCloud Keychain which I don't even know what it is. Seems suspicious to me. If the person who use to own the number is doing it he should know it is not his number anymore because he obviously didn't pay his bills.  I'm not too sure about iCloud Keychain so just want to know my info safe?? It says it can store credit card numbers which is what gets me worried. Frankly I think it's pretty stupid to save that kind if information with any kind of app. But I don't want some random person trying to access my personal information because they are bitter they lost their number.  Please let me know as soon as possible so I can change passwords or anything that is needed.
    thanks

    If it were me, I would go to my carrier and get a new number. Since you have only had it for a month, the inconvenience would be minimal.
    Barry

  • HI. I have itunes 10.6.1.7. When I goto movies i am not able to add and when I click on add file to library and select the file and add its not getting added. When i goto Library it says  that movies I add are in library.Which I cant add

    HI. I have itunes 10.6.1.7. When I goto movies i am not able to add and when I click on add file to library and select the file and add its not getting added. When i goto Library it says "feature films and home movies you add to itunes appear in movies in your iTunes library. To play a movie, just double click it". And below are two options for Downloading movies from store and rent movies. Please help.

    I get the exactly the same problem with win 7, i rang apple support who suggested i try another machine/or create another account on my machine???? why should i, stupid ipad 3rd gen is now sitting here un syncable, apple support ....tut tut very poor support, its a shame im out of the 7 day period otherwise this ipad would be going straight back, older versions of itunes worked fine, some one must know a fix for this??

  • 3rd gen iPod Nano will not sync with latest version of iTunes. It passes the connectivity test but not the sync test under diagnostics.  Worked fine on old Windows 7 laptop but not new one.  From Control Panel it shows up as an Apple iPod USB Device...

    3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics.  Worked fine on old Windows 7 laptop but not new one.  From Control Panel it shows up as an Apple iPod USB Device...

    Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
    There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok.

  • I created my iTunes account when I was living in Venezuela, but have relocated to the US now.  How do I change my apple store to allow me to download apps that are not available in the store available to Venezuela?

    I created my iTunes account when I was living in Venezuela, but have relocated to the US now.  How do I change my apple store to allow me to download apps that are not available in the store available to Venezuela?
    Sorry for the long 'subject'!  hahaha  I am new to the community.  This should be fun!

    No, What I mean  is, Now I am leaving in USA but every time that I tried to download an app only appear app available in Venezuela no the one available in USA. 
    I already change my address and select USA but still I can not download app for USA

  • Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

    Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
    The system shows everything is ok.
    Please any help greatly apreaciated.
    Thank you
    Valentin

    ValentinT, welcome to the forum.
    There are no drivers available for Windows 8.  I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected.  It seems that the Sound is one area that gets changed when updating to Win 8.1.  At least, this is what happened to me.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

Maybe you are looking for

  • Scheduling agreement in subcontracing scenario

    Dear All, In our client they are using the scheduling agreement for subcontracting scenario in legagy system. How can we map this in SAP? I created scheduling agreement for subcontracting vendor but could not see the BOM for line item.And when i am d

  • Cannot install Lion on External Hard Drive

    I have a brand new ssd in a hard drive enclosure and want to put lion on it before I install it into the computer, taking out the old hard drive (with SL on it). I got it from the app store, it installs until it has to restart, and then after it rest

  • CC&B 2.3.1 and Weblogic 10.3.3.x compatibility

    With CC&B v2.3.1 using OUAF 2.2.0.8 is it possible to install Weblogic 10.3.3.x ? Thanks

  • How  can I change the displayed video size in the Clearbox Lightbox widget?

    Hi Everyone,                        This is what I'm working on: http://www.artbywaqas.com/STORYBOARDS.html http://www.artbywaqas.com/DEMOREEL.html The videos are actually bigger but they show up really small in the browser window. How can I fix this

  • Reassigning activities - please help

    Hello everyone, I am fairly new in working with sap and therefore have the following question. I have 300 activities/calls assigned to a person. This person has left my company. I now want to reassign the activities to his replacement. In other words