Follow-up on question about copying 10.4

I only got one reply to my question about how to copy OS 10.4 from one internal drive to another and unfortunately, the response was cut short. Something about if I had another computer with Firewire, using it and that's as far as the response went. Yes, I have a  laptop and have Firewire, but still don't know how to use it to help.

If you just wish to make a duplicate of one hard drive to another hard drive in the same G5, then do this:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the second internal drive. Source means the internal startup drive.

Similar Messages

  • Question about 'copy transactions'

    In the standard training book, there is a saying that 'When you copy transactions, the system produces a copy an ddisplays it for processing. When the copied transaction is saved, the document flow is not updated, that is, the copied transaction has no connection to the orginal transaction.'
    But how can I see the original transaction in the document flow?
    Regards,
    Anders

    Hi,
    The feature you are talking about here is known as Copy Control. You can get the whole reference of it from the following link
    http://help.sap.com/saphelp_crm60/helpdata/en/5b/e4f53911cac83ce10000000a114084/frameset.htm
    You will get the subsequent and preceding document which will be highlighted to show you the difference.
    Hope this helps.
    Thanks,
    Samantak.

  • Question About Copying Tracks From a CD Into iTunes

    Newbie here.
    I currenly have about 700 songs on my Ipod Touch. (I put them on there from several old CD's I have of Napster tunes which I obtained when Napster was, well, you know . . . let's just say I donwloaded these tunes a long, long time ago.)
    Anyway - so now I want to load a commercial CD onto my Ipod. "Spamalot," as a matter of fact. I put the CD into my computer, open up iTunes and press the magic button to import all of the tracks from the CD into iTunes. And it does it, very quickly, as a matter of fact.
    The only problem is that all of the songs on the CD (25 of them) are scattered throughout the 700 songs already in my library. I have to spend way too much time hunting them down and schlepping them into my newly created Spamalot playlist.
    Surely there is a better way to do this. I would think that I should be able to create a playlist and then load all of the songs from any CD directly into the playlist.
    How do you do that?

    What I would like to do is (1) create a playlist and then (2) copy or import tunes from a CD directly into the playlist I have just created.
    From what I am hearing, I don't think that can be done. From what I am hearing here, you must first import the tunes into your iTunes general music library and THEN move them into a playlist.
    no you can't do it directly, music must be imported into the library first, then copied into the playlist. i'm not sure why you would need to - sure it would save part of the work if you could do it all at the same time, but it's not exactly difficult to import, then create a playlist.
    you could create the playlist before you import and add the tracks in as they are importing, but that's not much easier than creating it afterwards.
    HOWEVER
    Have you considered my 'Smart Playlist' suggestion? I think this will do what you want. Smart Playlists update automatically to coincide with any relevant changes in the itunes library. If you create a Smart Playlist with the album title, as tracks that have that album title are imported into itunes, they will automatically go into the Smart Playlist.

  • InfoPath web forms from sharepoint 365 submission - question about copying senders on submit

    I have set up a few InfoPath web forms.  I tested including an email field when the submit is processed it will also send a copy to the email address entered in that field.  I am just seeing if there are any options available for the user to
    be able to open the file after the attachment is saved from the email if they don't have InfoPath on their machine? any way for them to save as a word doc, pdf etc?

    Hi,
    As I understand, you want to know the attachment sent with the InfoPath form email can be saved as other file types.
    The attachment sent with the InfoPath form email will stored as XML files.
    If there is no InfoPath installed, we can export the XML data to Excel, Access or PDF.
    The article is about importing and exporting form data and form templates for your reference:
    https://support.office.com/en-us/article/Introduction-to-importing-and-exporting-form-data-and-form-templates-a79500f9-0dea-423d-a66b-4d6231c0c5e4
    Best regards
    Sara Fan
    TechNet Community Support

  • Question about Copying an MSS iViews from Migrated Business Package

    I have copied the iViews from the MSS migrated content and placed in my own folder.  I then changed some of the properties on the copied iViews.  I assigned my copies to a role.  The problem is that the iViews, when ran in the portal, are still using the properties on the original iViews which I copied instead.  What have I missed?  Is there some settings I need to change after copying an iView?

    I recopied the iViews and they seemed to work correctly after that.  Portal iView copying is a bit buggy.

  • Ant question about copying dirs

    HI all,
    I want do copy a folder into another folder (incl. files!)
    i have for example :
    /app/foldera
    and /app/destination/
    and i want to copy folder a into destination so that it looks like this in the end:
    /app/destination/foldera
    I'm using ANT-151

    its simply not posibble
    the only option is
    read each file in a folder subfolder...
    adn write again ...
    but is it worth whats the hell of time its going to take..
    and will it be successfull...i doubt..
    one can try
    using runtime class called command process and pasing argument copy *.* from a b

  • Question about "Copy To All" Feature in Color

    Is there anyway to undo the "copy to all" feature in the Primary In Room once its been clicked? On longer project it is particularly annoying to be almost done, and accidentally change all your grades with that button.

    "Undo" is a bit of a bone of contention. There should be one level of it available... but whether the "Copy To All" counts as one operation might be up for debate. For now, I'd consider it to be a showstopper. You might save some of your efforts with a "revert" command, or back up one auto-save.
    jPo

  • Question about source system copy for BW

    Dear all,
    I have a quick question about copying a source system for BW.
    We have two clients in the source ERP:
    100 Customizing
    200 Testing
    Our BW is only linked to client 200, so when we now delete client 200 and make a copy from 100 to 200, are we then still able to restore the source system connection so that our extraction will work, or will it fail, as in client 100 I have no BW related (except the cross-client-objects like datasource) information, that can be used for a possible restore of this connection.
    What is the procedure in this case?
    Thanks,
    Andreas

    Unfortunately, you will lose your source connection and need to create a new one in R/3.  You can use the same source system name in BW, but check the source system connection after the copy (SM59).  Also, I would "Restore" the source system (in BW, right-click on Source system in RSA1, and click "Restore") to insure the datasources get replicated from R/3 to BW.
    Depending on how much you want your BW and R/3 systems to be in synch, you will need to rebuild all your data providers (cubes/ODS's) from your R/3 system.  This means deleting all the data and running the initializations from scratch.  At the very least, you will need to rebuild the delta queues.
    Curious, if 100 is just for customizing, is there any data in it?  Are you just creating a new blank client 200?

  • Less dumb follow-up question about super/sub classes in WDJ?

    This is a follow-up question to the question which Maksim answered in this thread:
    Dumb question about super/sub classes in WDJ
    Question:
    Is there any kind of weird C++-like statement that you can put at the top of a WDJ module to force the module to interpret any reference to superclass A as a reference to some specific subclass B of A ???

    David,
    1. Java has no preprocessor, so C++ tricks are not available. Also I would not recommend such tricks even in C++ if you don't want to turn your colleagues working with same code into personal enemies.
    2. The phrase "easier to create a WDJ custom class loader " makes me smile. First, it's not that simple to interfere WDJ class loading scheme. Plus custom class loaders is not trivial Java topic per se.
    3. The problem "replace all A-s with B-s" is typically solved using one or another GoF creation patterns, like <a href="http://en.wikipedia.org/wiki/Abstract_factory_pattern">Abstract Factory</a> or <a href="http://en.wikipedia.org/wiki/Factory_method_pattern">Factory Method</a>. You may use them with custom class loader, if you really want to
    By the way, all UI controls in WD are created using Abstract Factory (role played by view). So you may use this as good example.
    Valery Silaev
    SaM Solutions
    http://www.sam-solutions.net

  • Follow-up question about forms and SharePoint Online

    I asked a question about life after InfoPath earlier, and got a good answer:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/fb23b3d9-8a09-4267-aab5-09929f6a3082/life-after-infopath-seeking-advice
    After looking at all of the limitations of SharePoint Online, I'm wondering how developers are dealing with the limitations. Lets say you are asked to develop something that has complex logic, including fetching data from external web services, dynamically
    displaying parts of a process to people depending on role, and ending up with a printable document. In our on-premises environment, InfoPath is well suited to this task, with some code behind for some things. Or, if not using InfoPath, we would use application
    pages and workflow.
    Neither of those are available in SharePoint Online, so what would you do?

    Some things, such as the conditional display of content, can be done via JavaScript. More advanced items, such as integrating external web services would likely require a SharePoint "app". A SharePoint app is essentially a link to a separate site
    that is running an asp.net web app (or PHP, or whatever). This asp.net site can do anything it needs with any web services, or conditional formatting, or anything. Because it's registered as a SharePoint app, it can also call back into the SharePoint site
    and work with data. So, a SharePoint App could present the user with a robust form that simply sends the data back to a SharePoint list. The SharePoint app can also be surfaced on the SharePoint site itself in an iframe, so the user won't know that the form
    is hosted by another server.
    By the way, the ideas behind the app model permeate the entire SharePoint environment: instead of having the SharePoint server itself run all kinds of custom business logic, that workload is handled by other servers, so the SharePoint servers can be focused
    on running the core bits of SharePoint. InfoPath puts a large load on the servers, so it's out.  XSLT list views also put a load on the server, so they're also out. SSRS is an amazingly fantastic tool, but is not supported in the cloud (and there's no
    alternative). Timer jobs, event handlers, workflow, and many other things have been re-architected to take the load off the SharePoint servers.
    Mike G.

  • A lot of questions about my MacBook Air

    I am really new to re-using Apple computers.The last time I used an Apple computer was back in 1987 when the school and my family had Apple IIGS computers. I have been using PC's which reqiure Microsoft. I a lot of have questions (10 questions) about my MacBook Air and I hope you good people can and will help me.
    Product: MacBook Air
    Operating System: Mac OS X Version 10.7.4
    1) I Downloaded MacKeeper because I was fooled. I had a bad feeling just before I Downloaded it and I should have listened to my heart. However, I didn't buy it or fully Install it. It was like a test run and then they wanted me to pay almost $100 for it. Thankfully, I didn't because I read it is Malware. I spoke with an Apple Tech at Apple Care and he helped me get rid of it (or so we think). I don't see it anymore on my computer. I read it can slow down your computer. How can you tell if it's really off of the computer?
    2) When I open "Finder" and I see that there are people Sharing my computer with me. I went into AirDrop and it reads, "Other people can see your Mac as (my name) MacBook Air when their computer is nearby." I bought a HotSpot and while it's turned on and I selected it as my WI-FI connection I thought it would  get rid of these people, protect what I type, me, my items, computer, etc. But it didn't.  
    I didn't know that I have to buy a exteral CD and/or DVD Player in order to connect to the brand new Modem and Router in one by NetGear. I am so used to PCs and the CD/DVD Players being built inside.
    The people at Apple Store told me that there is an internal modem inside, but I don't know how to find it and what to do then.  Should I use a Firewall?, An AntiVirus, AntiMalware, AntiSpyware, etc. Apple Care tech told me I don't need to get an AntiVirus.
    3) Is there a new kind of Wireless Modem and Router that doesn't require a CD-ROM?
    4) When I travel or fly and I am not close to home I was told by Best Buy and Sprint that I had to buy a mobile HotSpot to use the computer (WI-FI) safely. As I typed, I have one. But it's pretty expensive and only gives me 1 hour and 15 minutes per day to Stream. What can I do to use this computer safely Online when I am out of range from a Modem and Router? What do people do when they travel on airplanes?  
    5) This compter won't let me use "Raid." I think you have to have a newer version. I hard about Raid on the radio from Leo (can't recall his last name) who's a Tech expert.
    6) Should I buy a ZipDrive? Apple Store Tech told me that I didn't need a ZipDrive. I just remember the episode of HBO's "Sex and The City" when Carrie looses everything because her copy crashed. Now, of course, I know that's a fictional show, but with PC's and Microsoft I have lost everything when it crashed, frooze up, etc. I know there's iClouds. I heard about Carbonite, but I have read the Pros and Cons about it. Mostly they are Cons about it. I just don't want to do anything wrong and mess up this computer.
    7) Should I buy a new Printer/Copier/Scanner because mine is an HP. It's not new, but it works. I even have a CD-ROM for Macs. What about the new product called, "Neat"?
    8) Is there a special product that I should buy to do Online Banking and/or other important stuff?
    9) I saw and read about iWork in the Apps Store and it sounds cool. I still have alot of friends and colleagues who still use Microsoft. Is iWork good to use? Should I Download it from the Apple Apps Store or can a buy it at Apple? Is there another Word Processing Program that is great and user friendly and will work with Macs and PCs?
    10) Should I Update the OS with OS X Mountian Lion Pro from the Apple Apps Store or buy it at Apple Store?
    In advance, I wish to thank you in this Apple Support Communites for your help.  Have a safe and happy holiday weekend!

    1) Here are instructions for removing MacKeeper. Since it mostly consists of manually looking for folders and specific files, if you follow the instructions you either fail to find what you are told to find (because your AppleCare guide gave you complete instructions which you followed) or you'll find some additional files that need to be replaced.
    2 & 3) I assume you are looking at the sidebar of a Finder window and seeing Shared and computers under it. Those are computers that you can potentionally share. To do so you'd need an account on their computer and a password. They are not sharing your computer.
    AirDrop allows you to create an adhoc network for filesharing and it only functions when you have selected the AirDop item in the SideBar. Actually doing that merely announces to computers in the same network node that your computer is available for a file to be sent to. Even then you have to explicitly allow the file to be downloaded to your computer. Similarly you'd be able to see other computers with AirDrop selected and be able to send them a file - which they'd have to accept.
    The only reason your NetGear Router comes with a CD is to install and run their 'easy' step by step configuration program. It can also be done manually with a browser. Read the manual to find the IP address you must enter to access the router's configuration menu. Apple's WiFi routers don't require a CD to install the software because the configuration software is already on your computer.
    I do have my firewall turned on. AntiVirus software isn't a bad idea - I use Sophos having tested it for a review for our local User Group and I found I liked it better than ClamAVx which is what I'd been using before. Both are free.
    4) I think you were scammed by Sprint and BestBuy. I use hotel, coffee shop, and restaurant WiFi spots and have for years. However, because they can be unsecured, I do not shop online or bank when I'm using them. I also use 1Password and don't reuse passwords so even if a sniffer should grab an account and password that's all it would get - one account.
    5) Raid doesn't really make sense with a MacBook Air - a RAID involves 2 or more disks being used as if they were one.
    6) Zip drive? No. External hard drive - yes. It isn't a question of if a computer's hard drive will malfunction, it is when. OWC has a nice selection of external drives and the Mac has a built in backup system called TimeMachine. Due to the way TimeMachine works, I've found that your TimeMachine drive should be at least twice as large - and preferably 3-4 times as large as the data you are backing up.
    7) if your printer works and it has Mountain Lion drivers, why replace it?
    8) Online banking is done with a browser - Use Safari or FireFox
    9) If trading files with Windows users is important Mac: Office is your best bet. If not, iWork, Mac:Office, or LibreOffice are all good possibilities.
    10) you can only buy Mt Lion via the App Store.

  • Two questions about Risk Management 2.0

    hi experts,
    Please find below two questions about Risk Management:
    -In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
    Error in the ABAP Application Program
    The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
    include "/ORM/LORM_API_SERVICESU10 " in
    line 97:
    "Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
    "parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
    "bel."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    Do you know where it could come from?
    -On the Portal>Risk Management
    when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Do we have to set up some customizing points before accessing these links?
    Thank you !
    Regards,
    Julien

    Hi Julien ,
    I have the same error what u described as :-
    -On the Portal>Risk Management
    when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Do we have to set up some customizing points before accessing these links?    "
    Are you able to solve this. Please let me know how to resolve this???
    Thanks
    Regards,
    Atul

  • EBS 12.1.3: a few questions about cloning

    Hi,
    We have EBS 12.1.3 on AIX 7.1.
    A few questions about cloning from shared application tier environment to non-shared application tier environment. We have been following "Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]"
    Source environment (shared app tier):
    - Two active application nodes and LB
    - One active database and one passive database setup with Oracle Data Guard.
    - SSL termination at the load balancer
    - PCP implemented
    Target environment (non-shared app tier):
    - One active application node
    - One active database node
    - No SSL
    - No PCP
    After the cloning was completed we noticed the following problems in the target system:
    1) Home page cannot be accessed as application tier $CONTEXT_FILE still contains "https" and ssl termination settings.
    Workaround:
    Modify (with text editor) Application Tier $CONTEXT_FILE as follows.
    <webentryurlprotocol oa_var="s_webentryurlprotocol" customized="yes">http</webentryurlprotocol>
    <sslterminator oa_var="s_enable_sslterminator">#</sslterminator>
    <login_page oa_var="s_login_page" customized="yes">http://myhost.mydomain.com:8000/OA_HTML/AppsLogin</login_page>
    <externURL oa_var="s_external_url" customized="yes">http://myhost.mydomain.com:8000</externURL>
    Run AutoConfig and start application tier.
    Is there a better and supported solution for this?
    2) Concurrent managers do not work correctly as they have still old node names (used in PCP in the source system). Workaround used:
    1. Logon to EBS web GUI and remove all nodes from all concurrent managers.
    2. Shutdown application tier. Verify that all concurrent managers have been shutdown. If not, kill the processes manually
    3. As apps user run cmclean.sql
    4. Restart application tier
    Is there a better solution for this?
    3) Database changes from ARCHIVELOG mode to nonarchivelog mode in the target system. Is there anyway to prevent this?
    4) Also, we would like to perform a full clone (app + db tiers) from production without shutting down the application. Is this possible? What would be the best documents to describe this? In Production, we have Oracle Data Guard setup with physical standby as per "Oracle Tech Note: Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1]". This can be used when performing a hot clone for the database, right? What about the application tier? Steps described in 406982.1 include running AutoConfig in which application tier should be down. Does the application need to be down when running "Maintain Snapshot Information"?
    5) One final question (not related to cloning). Oracle Enterprise Manager console webUI has recently stopped working in IE8. E.g. https://myhost.mydomain.com:5501/em gives "Page cannot be displayed". This was working correctly last week. In Firefox, the same link is working fine. Any ideas how to fix this?
    Thanks for your answers in advance.
    BR,
    TH

    1) Home page cannot be accessed as application tier $CONTEXT_FILE still contains "https" and ssl termination settings.
    Workaround:
    Modify (with text editor) Application Tier $CONTEXT_FILE as follows.
    <webentryurlprotocol oa_var="s_webentryurlprotocol" customized="yes">http</webentryurlprotocol>
    <sslterminator oa_var="s_enable_sslterminator">#</sslterminator>
    <login_page oa_var="s_login_page" customized="yes">http://myhost.mydomain.com:8000/OA_HTML/AppsLogin</login_page>
    <externURL oa_var="s_external_url" customized="yes">http://myhost.mydomain.com:8000</externURL>
    Run AutoConfig and start application tier.
    Is there a better and supported solution for this?No, you need to edit the context file manually and run AutoConfig.
    2) Concurrent managers do not work correctly as they have still old node names (used in PCP in the source system). Workaround used:
    1. Logon to EBS web GUI and remove all nodes from all concurrent managers.
    2. Shutdown application tier. Verify that all concurrent managers have been shutdown. If not, kill the processes manually
    3. As apps user run cmclean.sql
    4. Restart application tier
    Is there a better solution for this?You are following the best approach. You could update the node details from the backend if you want.
    3) Database changes from ARCHIVELOG mode to nonarchivelog mode in the target system. Is there anyway to prevent this?By default, Rapid Clone will create the target database in noarchivelog mode.
    4) Also, we would like to perform a full clone (app + db tiers) from production without shutting down the application. Is this possible? What would be the best documents to describe this? In Production, we have Oracle Data Guard setup with physical standby as per "Oracle Tech Note: Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1]". This can be used when performing a hot clone for the database, right? Correct.
    What about the application tier? Steps described in 406982.1 include running AutoConfig in which application tier should be down. Does the application need to be down when running "Maintain Snapshot Information"?You can copy the application tier node files while the application is up. And, you do not need to shutdown the application to run "Maintain Snapshot Information".
    5) One final question (not related to cloning). Oracle Enterprise Manager console webUI has recently stopped working in IE8. E.g. https://myhost.mydomain.com:5501/em gives "Page cannot be displayed". This was working correctly last week. In Firefox, the same link is working fine. Any ideas how to fix this?
    If it is working from one browser, then it should not be an EM issue. Have you tried from a different client and see if this works? Have you changed any setting in your IE browser? Please make sure you add the EM URL to the trusted sites list.
    Thanks,
    Hussein

  • Basic questions about programing for J9 VM

    I need to create a java application to run on a Pocket PC 2003 OS and I'm limited to using IBM's Websphere J9 Virtual Machine. I'm new to using java in this capacity and therefore have lots of questions which I'm guessing are pretty basic. Despite my best efforts, I've found very little to help me online. Below are a couple questions I have that I'm hoping someone can help me with. Even better, if you know of any resources that could help me with these and other questions, I'd love to have them. Thanks in advance.
    1. I'm using standard AWT for the GUI but I'm having problems getting frames, dialogs, etc., to come up in anything less then full screen. setSize() and resize() have no effect, even if I extend the frame and override the setMinimumSize, setPreferredSize, setMaximumSize methods. What do I need to do to get a child window to appear in something less than full screen?
    2. I'd like to be able to add menu's to the buttom toolbar (with the keyboard) but have no idea how I would add something to it. Can someone point me in the right direction?
    3. When my application gets an iconified event I go ahead and call a System.exit() to exit the application. This doesn't kill the java VM though, which continues to run in the background (taking up plenty of memory). If I run my application using the J9w.exe so that it runs without the console, then not only does the VM continue to run, but I have no way to stop it (the running program list can't see it). Since each time I run my application it starts a new VM, it only takes a couple of times before I'm out of memory and have to do a soft reset of the PDA to make things right. Can I kill the VM when I kill my application?
    4. I learn best by looking at example code, but have been unable to find any code people are running on J9. I have the GolfScoreTracker installed and running on my PDA, but the jar file contains only the classes. Since it's supposed to be a demo, I had hoped that the source code would be included, is that hoping too much or is the source code available somewhere? In addition, if you know of any applications out there with available source code that are known to run well on a PocketPC J9 environment I'd appreciate the link.

    Hi there, I saw your questions, im currently developing a java pocket pc application as well and here's what i go so far:
    AWT seem to be hard to use on pocket pc, instead i recommend that you use SWT, which is a technology developed by eclipse. It's already installed on the eclipse plugins, you just need to download the jar and dll files for the pocket pc. They are available at: http://www.eclipse.org/downloads/index.php
    I assume that you already have the J9 working on your device. So you only need to copy the SWT.jar file and the swt-win32-3064.dll to the folder containing the .class files on your device.
    Now, on your java IDE(im using eclipse) Add the SWT.jar library to your project which should be on C:/eclipse/plugins/org.eclipse.swt.win32_3.0.2/ws/win32/swt.jar or something like taht depending on your eclipse root.
    Now you are ready to code some SWT, here is a sample program from Carolyn MacLeod, i modified a few things so it could run on the pocket pc but it's almost the same. Once you coded in eclipse run it, then copy the class file from your desktop to your device(There should be like 4 or 5 classes like sample.class, sample$1.class etc. copy all of them) where you put the jar and dll files(If program does not run you may try to rename the dll file for swt-win32-3050.dll instead of 3064.dll). Now after you have everything set up you need to create the lnk file in order to run the program. On your desktop create a new textfile and write the following on it:
    255#"\Archivos de Programa\J9\PPRO10\bin\j9w.exe" "-jcl:PPRO10" "-cp" "\My
    Documents\Java\swt.jar" ;\My Documents\Java" sample
    Paths depend on your install, and the place where you put your classes and jar file. path for j9w is usually "\Program Files\J9\PPRO10\bin\j9w.exe", and the last word should be the classname.
    Currently this form only displays an image on a canvas, click on the browse button and choose a pic and it will display on the canvas. Im trying to connect the form to an oracle database but no success yet on the device.
    Hope it helps, if you have any questions about the code or something, and I know the answer, please feel free to ask.
    See ya
    import org.eclipse.swt.*;
    import org.eclipse.swt.widgets.*;
    import org.eclipse.swt.layout.*;
    import org.eclipse.swt.events.*;
    import org.eclipse.swt.graphics.*;
    public class sample {
    static Shell shell;
    static Display display;
    static Text dogName;
    static Text textdb;
    static Combo dogBreed;
    static Canvas dogPhoto;
    static Image dogImage;
    static List categories;
    static Text ownerName;
    static Text ownerPhone;
    static String[] FILTER_EXTS = {"*.jpg"};
    public static void main(String[] args) {
    display = new Display();
    shell = new Shell(display, SWT.RESIZE | SWT.CLOSE);
    Menu menu = new Menu(shell, SWT.BAR);
    shell.setText("Dog ShowS Entry");
    shell.setMenuBar(menu);
    GridLayout gridLayout = new GridLayout();
    gridLayout.numColumns = 3;
    shell.setLayout(gridLayout);
    new Label(shell, SWT.NONE).setText("Dog's NameS:");
    dogName = new Text(shell, SWT.SINGLE | SWT.BORDER);
    GridData gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL);
    gridData.horizontalSpan = 2;
    gridData.widthHint = 60;
    dogName.setLayoutData(gridData);
    new Label(shell, SWT.NONE).setText("Breed:");
    dogBreed = new Combo(shell, SWT.NONE);
    dogBreed.setItems(new String [] {"Collie", "Pitbull", "Poodle", "Scottie"});
    dogBreed.setLayoutData(new GridData(GridData.HORIZONTAL_ALIGN_FILL));
    Label label = new Label(shell, SWT.NONE);
    label.setText("Categories");
    label.setLayoutData(new GridData(GridData.HORIZONTAL_ALIGN_FILL));
    new Label(shell, SWT.NONE).setText("Photo:");
    dogPhoto = new Canvas(shell, SWT.BORDER);
    gridData = new GridData(GridData.FILL_BOTH);
    gridData.widthHint = 60;
    gridData.verticalSpan = 3;
    dogPhoto.setLayoutData(gridData);
    dogPhoto.addPaintListener(new PaintListener() {
    public void paintControl(final PaintEvent event) {
    if (dogImage != null) {
    event.gc.drawImage(dogImage, 0, 0);
    categories = new List(shell, SWT.MULTI | SWT.BORDER | SWT.V_SCROLL);
    categories.setItems(new String [] {
    "Best of Breed", "Prettiest Female", "Handsomest Male",
    "Best Dressed", "Fluffiest Ears", "Most Colors",
    "Best Performer", "Loudest Bark", "Best Behaved",
    "Prettiest Eyes", "Most Hair", "Longest Tail",
    "Cutest Trick"});
    gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL | GridData.VERTICAL_ALIGN_FILL);
    gridData.widthHint = 60;
    gridData.verticalSpan = 4;
    int listHeight = categories.getItemHeight() * 12;
    Rectangle trim = categories.computeTrim(0, 0, 0, listHeight);
    gridData.heightHint = trim.height;
    categories.setLayoutData(gridData);
    Button browse = new Button(shell, SWT.PUSH);
    browse.setText("BrowsePic");
    gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL);
    gridData.widthHint = 60;
    browse.setLayoutData(gridData);
    browse.addSelectionListener(new SelectionAdapter() {
         public void widgetSelected(SelectionEvent event) {
              FileDialog dialog = new FileDialog(shell, SWT.OPEN);
              dialog.setFilterExtensions(new String[] {"*.*"});
              String fileName = dialog.open();
    if (fileName != null) {
    dogImage = new Image(display, fileName);
    shell.redraw();
    Button delete = new Button(shell, SWT.PUSH);
    delete.setText("No action");
    gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL | GridData.VERTICAL_ALIGN_BEGINNING);
    gridData.widthHint = 60;
    delete.setLayoutData(gridData);
    delete.addSelectionListener(new SelectionAdapter() {
    public void widgetSelected(SelectionEvent event) {
    Button enter = new Button(shell, SWT.PUSH);
    enter.setText("No action");
    gridData = new GridData(GridData.HORIZONTAL_ALIGN_END);
    gridData.horizontalSpan = 3;
    enter.setLayoutData(gridData);
    enter.addSelectionListener(new SelectionAdapter() {
    public void widgetSelected(SelectionEvent event) {
         shell.open();
         while (!shell.isDisposed()) {
              if (!display.readAndDispatch())
                   display.sleep();
         display.dispose();
    if (dogImage != null) {
    dogImage.dispose();
    }

  • Some questions about building  a plug in

    Hello,
    1.I'm trying to build a plug in ( for EM12c release 2 ) for my standalone java application - which exposes mbeans whom i want to collect some metrics with.
    It's been a while since i started to build it - and I asked quite a lot of quesions about it - because the documnets supplied with the EDK and
    the books ( ProgrammersGuide, ProgrammersReferece and the README file ) are not very clear to me ( I'm a newbie with EM in general .. )
    So far some of the questions got answered and were very halpfull with this long process. BUT, there are some questions that nobody answered yet.
    I'm quite "stuck" with it. I'm talking about the questions in : Re: A question about updating metadata files in plug in
    I have a deadline for this plug in ( which is very close ..) so this the reason I post this new message.
    I will appriciate any help about those questions .
    2. Regarding the above, ( hoping to have an answered soon ..) I'm trying another way to buils this plug in:
    In the README file there is this section( 3.6 : using MPCUI ) . I read the programmersReference ( chapter 8 ) and followed the instructions both in the README file and the ProgrammersReference .
    For a begining, I just wanted to modify a small thing in the example supplied ( Demo Host System ) just to get started with something .
    So i modify the file which contains the label ' Select member ... ' ( i don't remember the name of the file since the project is in my office , and I can't copy/paste ..- I think the the file icontians the name ' ConfirmationTarget .xml - it's one of the pages seen while adding a target ) .
    I i changed it , i build the project ( using FlexBuilder) but did not use ANT as it's says in the README - the eclipse IDE build this file automatically
    ( HostSystem.swf  in bin-debug dir as it says in the README ) . I copied this file to stage_dir/oms/metadata/mpcui .
    i build a new plug in ( i incremented the version of it ) - no errors, everty thing was fine .I also copied this file to the oms server ( it wasn't there before )
    and than run the commad ' emctl register oms ...' as it says in section 3.6 - and o got 'Success' eventually .
    Now, when i opened the EM console , hoping to see tge change i made ( again , it's just a change of the title of the step while adding the target , and adding another menuitem to the 3 item that were alreay there ( CPU, FS, etc ) .
    I believe wad i did is right- i mean changing in the right file and place ( there is no title like like this in any oter source file in the whole project )
    but still, I didn't see any change! it seems execatly as it was befoer the change ..
    Any idea?
    Thanks.

    Regarding your question #2. Please read my response here carefully as it covers a number of different issues.
    1. Ant is not required to build the SWF file in your plug-in. It is an OPTION. Section 8.27 describes the different development options using either Ant or FlexBuilder.
    2. You do NOT need to ever copy a SWF file to any location under the OMS runtime. You need to include it in the stage area and then either build an OPAR or use emctl to incrementally update the deployed plug-in. It has to either be deployed as part of the plug-in deployment or updated incrementally using emctl register oms metadata. Section 8.27.2.6 describes the specific steps to do this incremental update.
    Steps to update the SWF associated with demo_hostsample. These are covered in the README and in chapter 8.
    1. deploy the demo_hostsample plug-in as described in the README
    2. create an instance of the Host Sample target type through manually discovery (Add Targets->Add Non-Host Target Specifying Properties)
    3. using the demo_hostsample.zip project in Flex Builder, modify some part of the code, for example, modify the line containing label="Current Status" to label="My New Label"
    4. rebuild the SWF, to be sure you can to a Clean build of the demo_hostsample project
    5. ensure there is an updated copy of the HostSample.swf under demo_hostsample\mpcui\bin-debug (NOT bin-release, unless you Exported A Release Build)
    6. copy that updated HostSample.swf file to the location on the OMS machine where you unzipped and built the OPAR for the demo_hostsample plug-in
    7. cd to the stage/oms/metadata/mpcui directory and replace the current HostSample.swf with the one you just built (BE SURE ITS THE UPDATED FILE)
    8. execute the command "emctl register oms metadata -sysman_pwd sysman -pluginId oracle.sysman.ohs -service mpcui -file demo_hostsample_uimd_swf.xml (BE SURE TO USE THE CORRECT sysman_pwd)
    At this point you should be able to go to the homepage for the Host Sample target you created and see the changes.

Maybe you are looking for

  • Mathscript Array -problem

    Dear Friends, I am reading the serial port data data , byte by byte..I used serial port vi and math-script in it .... And these  serial data are sent in a format like below........ format:  HEADER ,  MSB  , DATA ,  CHECKSUM.. I need to collect these

  • I recently installed Maverick and now my Mac is running very slow

    i recently installed Maverick and now i am running very slow.

  • Discription of payment term missing in proforma invoice

    Hi can any one please tell me the reason for the above.

  • Date range in function module

    Hi guys,              i have a selection screen where i need to give range of date. say from 01.01.1998 to 01.02.2007. i need to pass this date range to 'Z' funtion module how can i do it. do i need to define it in tables declaration. if yes what wil

  • Removing default music from Nokia 5300 track list

    Hi all. I have a really frustrating problem. I have a Mac and put loads of music onto my 5300 Xpress Music using Bluetooth, as I can't use Nokia's PC software. Anyways, the Micro SD card that came with the phone came preloaded with some short ring to