Font embedding only works when external HD present

I have an old FLA project that I copied from an external HD.
When publishing this FLA, the mac finder gives this message "flash is trying to access files on your external HD. Allow?"
When I allow it, all goes well. When I don't allow it or when the external HD is not present, flash cannot embed fonts.
I do have the proper fonts on my system and in the library. I don't have these font problems with other FLA files.
If I copy all the internal frames and library elements into a new clean FLA, the problem still exists...
How can I get this flash file to embed the right font???

check your publish settings and make sure there's not absolute path to the swf (or any of the other published files).

Similar Messages

  • Upgrading to Mavericks wrecked my MacBook Pro & now it only works when external hard drive is plugged in

    So I tried to upgrade to Mavericks today and it failed (same error as in this post which seemed to be a common problem). It wouldn't let me repair the disk, and after trying all sorts I rebooted my computer in recovery mode - it wouldn't let me reinstall Lion because the hard drive was apparently locked and I could see no way around this. So I decided to restore from a Time Machine backup on an external hard drive and that worked okay, except my MacBook now only works when the external hard drive is connected. If I remove the external hard drive, I'm back to square one as it still won't let me reinstall Lion as the HD is locked!
    I have no idea what's going on. HELP!

    The startup drive is failing, or there is some other internal hardware fault.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

    Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
    I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
    To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
    What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
    Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source.  What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
    Some other information:
    - Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
    - If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
    - The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
    Any information would be great – am I missing something here, or is this genuinely weird?

    Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
    Here's what I did to test:
    Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured.  I transferred onto their machines, hooked up my Sony D8, and attempted to play the video.  It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop).  I even tried changing each machine's firewire driver to the legacy one and same results.  I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
    I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver.  Very annoying.  I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
    I have 2 other things I can try:
    1.  Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
    2.  Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/).  I can't do it with my Home edition apparantly.
    Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
    Tim

  • Strange issue with external monitor, only working when external speakers plugged in

    Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
    I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
    To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
    What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
    Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source.  What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
    Some other information:
    - Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
    - If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
    - The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
    Any information would be great – am I missing something here, or is this genuinely weird?

    Hello cgoldberg11
    Please go to the below link to test if you are having a speaker hardware failure.
    Testing for Hardware Failures (Windows 7)
    This will rule out hardware failure, let me know how that goes.
    Thanks
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
    Reguards,
    Mo

  • Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

    Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

    You are referring to a feature called Clamshell Mode, please read Clamshell Mode setup for instructions.
    BTW when posting when you use generalities such as "have tried everything" this tells us nothing. When posting please be specific and try to paint a complete picture. It just makes things easier for those trying to help you.

  • Iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

    iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

    Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
    Regards.

  • My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

    Time Capsule Airport
    Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
    Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

    This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
    In the airport utility bring up your Time Capsule.
    Simply post the screenshots here.
    So here is mine.
    Click on the Edit button and give us the Internet and Wireless and Network tab..
    eg.
    Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
    This is wifi in your computer.
    The following are important..
    DO not use long names with spaces and non-alphanumeric names.
    Use short names, no spaces and pure alphanumeric.
    eg TC name. TCgen5
    Wireless name TCwifi
    Use WPA2 Personal security with 10-20 character pure alphanumeric password.
    read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
    OS X Mavericks: Time Machine problems
    Mount the TC manually in finder.
    AFP://TCgen5.local
    When asked for the password .. that is the disk access password and save it in the keychain.
    Reset Time Machine
    See A4 here. http://pondini.org/TM/Troubleshooting.html

  • My macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help.

    my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
    disk utility give me this:
    Process:         Disk Utility [371]
    Path:            /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
    Identifier:      com.apple.DiskUtility
    Version:         11.5.2 (298.4)
    Build Info:      DiskUtility-2980400~60
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [86]
    Date/Time:       2013-11-05 03:29:41.247 -0500
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          9522 sec
    Crashes Since Last Report:           29
    Per-App Interval Since Last Report:  981 sec
    Per-App Crashes Since Last Report:   25
    Anonymous UUID:                      F6B8E263-76C8-4C7D-AA58-48134BF4BA78
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
    0   libobjc.A.dylib                         0x0000000100c62fbc _read_images + 312
    1   libobjc.A.dylib                         0x0000000100c79721 map_images_nolock + 1266
    2   libobjc.A.dylib                         0x0000000100c62761 map_images + 115
    3   dyld                                    0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
    4   dyld                                    0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
    5   dyld                                    0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
    6   dyld                                    0x00007fff5fc08f7c dlopen + 490
    7   libSystem.B.dylib                       0x0000000100a14e40 dlopen + 61
    8   com.apple.CoreFoundation                0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
    9   com.apple.CoreFoundation                0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
    10  com.apple.Foundation                    0x0000000101008355 _NSBundleLoadCode + 638
    11  com.apple.Foundation                    0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
    12  com.apple.Foundation                    0x000000010101960c -[NSBundle principalClass] + 38
    13  com.apple.framework.DUSupport           0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
    14  com.apple.framework.DUSupport           0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
    15  com.apple.DiskUtility                   0x0000000100006082 0x100000000 + 24706
    16  com.apple.DiskUtility                   0x0000000100005f59 0x100000000 + 24409
    17  com.apple.AppKit                        0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
    18  com.apple.AppKit                        0x00000001013e1f77 -[NSWindowController window] + 112
    19  com.apple.AppKit                        0x00000001015f61d9 -[NSWindowController showWindow:] + 47
    20  com.apple.AppKit                        0x00000001015c7c5c -[NSDocument showWindows] + 98
    21  com.apple.AppKit                        0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
    22  com.apple.AppKit                        0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
    23  com.apple.AppKit                        0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
    24  com.apple.AppKit                        0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
    25  com.apple.AppKit                        0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
    26  com.apple.Foundation                    0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
    27  com.apple.Foundation                    0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
    28  com.apple.AE                            0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
    29  com.apple.AE                            0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
    30  com.apple.AE                            0x0000000104d7312b aeProcessAppleEvent + 210
    31  com.apple.HIToolbox                     0x00000001028a0619 AEProcessAppleEvent + 48
    32  com.apple.AppKit                        0x00000001013fc095 _DPSNextEvent + 1191
    33  com.apple.AppKit                        0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
    34  com.apple.AppKit                        0x00000001013c168f -[NSApplication run] + 395
    35  com.apple.AppKit                        0x00000001013ba3b0 NSApplicationMain + 364
    36  com.apple.DiskUtility                   0x0000000100002009 0x100000000 + 8201
    37  com.apple.DiskUtility                   0x0000000100001db8 0x100000000 + 7608
    Thread 1:  Dispatch queue: com.apple.libdispatch-manager
    0   libSystem.B.dylib                       0x0000000100a27c0a kevent + 10
    1   libSystem.B.dylib                       0x0000000100a29add _dispatch_mgr_invoke + 154
    2   libSystem.B.dylib                       0x0000000100a297b4 _dispatch_queue_invoke + 185
    3   libSystem.B.dylib                       0x0000000100a292de _dispatch_worker_thread2 + 252
    4   libSystem.B.dylib                       0x0000000100a28c08 _pthread_wqthread + 353
    5   libSystem.B.dylib                       0x0000000100a28aa5 start_wqthread + 13
    AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • My Ipod touch will only work when plugged into a itouch radio.  When I take it out, it goes blank.  Why can I do?

    My Ipod touch will only work when plugged into an Itouch radio.  When I take it out of the charger, it goes blank.  The battery shows fully charged.  It appears that the battery is no longer charging.  What should I do?

    Try a reset: Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. If that fails, the battery may have gone kaput.

  • My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    Sounds like the battery is shot and in need of a replacement.  You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
    Not much else you can do for troubleshooting this one.
    B-rock

  • I recently repaired disk permissions on my mac HD and now my on-board speakers wont work, the icon is greyed out and only works when my headphones are plugged in.

    I recently repaired disk permissions on my mac HD and now my on-board speakers wont work, the icon is greyed out and only works when my headphones are plugged in

    Try to put your headphones several times in and out from your connection, might be the switch is stuck. Normally it should work again while trying to plug the headphones in and out!

  • My CD/DVD Drive Only Works When I Jam the CD/DVD in hard..?

    My CD/DVD drive only works when I stuff the CD/DVD in the drive EXTRA hard. If I just try to put in with normal force (that at one time worked) it spins the disc around, makes a spinning noise, and then ejects it. I'm taking it to the Apple Store soon. What should I expect to be wrong and is it fixable? Please share details. Thanks in advance.

    Welcome to Apple Discussions!
    It sounds like the spring that loads the drive has gotten jammed by something. This can often happen if you use CDs with sticky labels, or do anything to label the discs directly. As a result of issues like these, I've not labeled any discs directly, and instead store the in jewelcases, and purchase them prepackaged in jewelcases to avoid such issues.

  • What's wrong with my MacBook, it only works when its plugged in to the wall charger

    my MacBook only works when its plugged in with the wall charger. What's wrong with it? it the problem fixable ?

    Marina -
    What Kappy said, or maybe your Battery charging cable is faulty, or something's happened to the input slot.
    I'd take it to Apple and have them troubleshoot it for you. 

  • My MacBook Pro wi fi is not working, it only work when I restart or switch off my computer. Now I M

    My MacBook Pro wi fi not responding. It only work when I switch on or restart my computer for an hour then goes off again . However because I have switched on and off to often I am having problems turning on my laptop

    Try this. In System Preferences / Network, create a new location and follow directions to configure it. That sometimes helps.

  • ISight only works when it's the ONLY firewire device?

    I have connected the iSight to both the firewire 400 and firewire 800 ports. It only works when it is the only device connected to the port.
    If I connect it to a hard drive, it works if and only if the hard drive is off. When I turn the drive on, the iSight ceases functioning. When I connect it to a hub, it works if and only if there are no other devices connected to the hub that are on.
    Is there a trick to getting the iSight working with other devices?

     Some devices are tricky for me, too. Possible hardware or software conflicts

Maybe you are looking for