Font Scrolling Does not work on Macbook in Cs5.5

I can use the font scrolling in illustrator, this works on a desktop mac. but can't seem to get it to work. tried unchecking enable missing glyph protection. and still doesnt work. What can I do to fix it, i know this works on mac but somehow my laptop wont work. Please Help!!!!!

You potentially have a "bad" font. Check your fonts and remove the offender.
Mylenium

Similar Messages

  • Two finger scrolling does not work on my MacBook (late 2008)

    Two finger scrolling does not work on my MacBook (late 2008) with either the notebook trackpad or a b/t conected magic trackpad.  Yes, I've set system preferences.  Suspect a driver or s/w problem.  Ideas?

    Saw another post that hinted that you need to go to accessibility settings:
    System Preferences > UniversalAccess > Mouse & Trackpad > Trackpad Options
    Enable scrolling (and I enabled dragging while I was at it and it worked.  Looks like wierd things can get set even if you don't mean it to.

  • Image display control scrolling does not work properly when zoomed in

    I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
    Has anyone noticed this behaviour, and what would be a reliable solution to avoid this? 
    Dirk

    Hello,
    no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
    I have attached a VI for simplicity (although there is hardly any code in it).
    If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position. 
    I think it is a bug in the implementation of the image display control.
    Thanks,
    Dirk
    Attachments:
    scrolling.vi ‏818 KB

  • Scrolling does not work in LR

    I've been frustrated by this for a while now. When in LR (currently on version 4.2, but same thing happens in earlier versions too), scrolling does nothing. If i'm trying to scroll up or down a panel, nothing happens.
    I'm on a Lenovo W701 running Win & 64bit. The scrolling does not work using either the track point or the touchpad.
    The work properly in all other applications.
    The pointer will change to an icon the represents scrolling while in LR, but nothing happens. Any thoughts or suggestions?
    If there is any other information that you might need, let me know.
    Thanks!
    Quinn

    What about a mouse? Does the wheel scroll?
    Sent from phone.

  • Scroll does not work.

    Hi,
    Scroll does not works.
    How can I fix it?
    P.S Photoshop CC 2014.2.2
    Thanks,
    Max

    I have discovered the solution and it involves an issue I suspected. After the restore of my old Time Machine Lion files to my new MBP running ML, the restore restored my computer back to Lion. After an install of ML, my computer worked perfectly except the fancy Scroll and zoom featured we all love from the trackpad. Ha already installed ML on other partitions and the trackpad worked perfectly on them.  Even the guest login's trackpad worked perfectly but not the main admin account.
    First thought was to create a new admin account and copy everything from the old admin to the new admin and then delete the old admin account. Hated the idea because all files had to be copied rather than moved.
    So what was left to do. I had thought of deleting all the apple preferences from the library and replace them with the contents of the library on another partition in ML. First I deleted old preferences many of which were old Lion preferences. That didn't solve the issue.
    I forgot that Lion and ML HIDE the user library so I was working on the wrong library. Discovered the Terminal command "chflags nohidden ~/Library" and I chose to reveal the user library on a ML partition.
    Solution:
    I booted into another ML partition. I guess that I could have booted into the new admin user account and changed the permissions  to access the old admin users Library But I chose to boot
    from another ML partition: copy ALL the com.apple. XXXXX.plist files and the folder  BY Host. It has special hidden files. Other  way is to copy the Preferences folder we'll say into the Desktop.
    I then proceeded to delete ALL the com.apple…….plist files and the Host folder into the trash. Then I copied all the apple.com…plist files and the Host folder and then rebooted. And now my wonderful Trackpad works as mountain Lion intended it to work.
    I'm leaving this solution because there's someone else in the MacWorld with the same issue.
    Ted

  • Safari scrolling does not work in osx mavericks please solve this issue

    safari scrolling does not work in osx mavericks please solve this issue

    I know it is a limited topic, but could you provide a little more detail?

  • MB Air two finger scroll does not work for a user but does for another

    Hi
    MB Air. 10.9.3.
    Defective Trackpad was just replaced. Two finger scroll does not work for the main user. I made a test log in and two finger scroll works. I booted off an external drive and two finger scroll works.
    I pulled all of the user preferences out, logged out and in and still does not work. Zapped PRAM. Checked all trackpad settings. No luck.
    Tried this in Terminal:
    defaults write -g com.apple.trackpad.scrollBehavior 2
    Any ideas?

    This sounds strange but check the settings in Settings>Accessability for the track pad. I belive your problem lies there not in Track Pad set up in Settings.

  • Horizontal Scroll does not work with Apple Magic Mouse

    Horizontal Scroll does not work with Apple Magic Mouse as it does with other Adobe software such as Photoshop.

    The system preferences window for the mouse has changed. The GUI elements are different.

  • Two finger scrolling does not work on Synaptics touchpad + clicking problems in web browsers

    Hello,  Since yesterday, i have problems with my synaptics touchpad on my HP Elitebook 8570w.The two finger scrolling and scrolling at the edge of the pad does not work.Also in google Chrome, all the links open in a new tab and when i try to click the new tab, it closes (normally that is the action when i click it with the middle touchpad button) Even in the practice mode of the synaptics settings of the touchpad, the two finger scrolling and edge scrolling does not work. Both options are enabled in the settings. I already tried to roll back the driver and reinstall the driver, without any effect.I expect the problem is the touchpad or the buttons itself. Is there a way to test the buttons and touch pad? How can i solve this problem?  please help me  sincerely, Karel 

    I would try installing the Windows 8.1 (64-bit)  Synaptics touchpad driver available in your sleekbook's web support download section before using compatibility mode.  Try the available earlier versions if the current driver does not work for you. 
    If you still do not have positive results, then use compatibility mode (choose Windows 8) on all three Windows 8.1 synaptics touchpad drivers, starting with the most current one.
    To use compatibility mode to install the driver softpaq just right click on the file and choose troubleshoot compatibility. Choose Windows 8 and run the installer.
    The following video has a decent explanation, but the narrator does not get to the point for a bit. Skip forward to minute 4  and watch it from there.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HT4628 The Wifi does not work when Macbook Air is started by Win8. How to let the Wifi work in Win8 ?

    Hi all,
    WIFI of Macbook Air works when the notebook started with OS X.
    But when I restart the Macbook Air with Win8, the Wifi does not work.
    The Macbook Air was bought last month. It is new model. The wifi may be a/c.
    Thanks,

    hey zyzzyxx, you're not the only one with this issue. it happens to me too. as soon as i unplug my cintiq via thunderbolt display my connection shoots straight back to having 20mbps down. i checked it using a speedtest.
    ever find a fix for it?

  • Touch pad scroll does not work in firefox minefeild but works in firefox 3.7

    Love Minefeild, but have notice that my touchpad scroll up and down does not work. This function works fine in Firefox 3.7 and other software. I am using the lastest nightly builds. Is there a solution?

    Sounds like your scroll pad drivers need to be updated, but considering that Firefox 4 is months away from being released the new drivers might not be available yet. Check with your manufacturers website in the software / drivers downloads section for newer drivers.

  • Changing the font size does not work with Textarea with HTML Editor

    If you change the font size in the text area of a "Textarea with HTML Editor" item it does not work. I've searched the forum and the only solution I've seen is to use an HTML editor foriegn to APEX. Does anyone have a better solution? Thanks, Elizabeth

    I'm having a similar issue except with HTML Editor Standard.
    What I'm doing is allow someone to write to an HTML Editor Standard field and then an HTML marked up text is saved to a db CLOB column. In another page, I reference this DB column and show it in an HTML Region (I do a computation Before Regions for a hidden item that writes out the html with "htp.p")
    Everything shows up fine EXCEPT the font tags and headings. I'm finding that the HTML Region sets the font size only with the < d i v s t y l e="font-size: large" >and NOT < f o n t size:6 >. When the HTML Editor renders the user's text input, any size changes are made with the < f o n t > tag, which is depreciated anyways, and not with "style". That's why the size is not showing up.
    I can't really figure out why the headings aren't showing up except maybe the css style in the region is overridding it...
    Is there another APEX item type like HTML Editor (which uses FCKEditor) that I can use, or maybe another approach to remedy this issue? Or maybe this post calls for an enhancement with the HTML Editor?{size}{size}
    </div>
    Edited by: maui26 on Mar 4, 2009 10:43 AM

  • Have just upgraded to Lion.  In all applications a box now appears that encloses topics, etc on the screen.  It is a problem as it also randomly moves around the screen.  Have no idea what the purpose is and want to get rid of it. Scroll does not work.

    Just upgraded to Lion. Scroll does not respond. Have tried altering preferences. Will not fix. In all applications, including this page, a box appears and seems to randomly move around the screen, resting wherever I begin to work. How can I turn this off and get scroll to work normally?

    Have a look at System Preferences, Accessibility, VoiceOver.
    (Command - F5).
    charlie

  • Youtube does not work in MacBook Pro

    Youtube videos do not work in my macbook.
    I can goto the website, but when I goto play the video..it does not work...a black box just appears instead of the video.
    How do I solve this problem?
    I already updated my flash player and reset Safari...still doesn't work.

    i tried..i did this before...i downloaded again after you sent the link...videos are still not working.
    Except for some...but I can't open them up on full screen.
    I think some of them are working because I tried this 32-bit thing that I read on the internet written by others who faced te same problem...but I ticked off the 32-bit thing because it didn't work for all the videos...basically..youtube isn't working

  • Internet connection does not work when Macbook wakes up from sleep

    I recently installed MAC OSX LION. After that whenever the macbook pro wakes up from sleep, the internet connection does not work. I get a message 'DNS lookup failed'. I have to Turn off the WIFI and turn it back on every time. Has anyone come across this?

    Same problem here. But I am afraid it has nothing to do with Safari because I don't even have Safari open. When it wakes from sleep, it has no internet connection and i cannot get me mail unless I shut wifi off and then back on. This happened back at the start of Snow Leopard too and it was something Apple eventually fixed.

Maybe you are looking for