Fonts went Wonky, what went wrong?

Hello,
I upgraded to iTunes 8.0.2 when the new software icon showed up a couple weeks ago, downloaded and restarted and visited the iTunes Store and all the fonts had been changed to some kind of bold symbol font. You can't read a thing. iTunes itself is fine but the store is wonky. I've got a screen grab to show. I haven't been able to figure out what went wrong, any ideas? I can't order a thing as I can't read anything!
Thanks!

Open Font Book. Under either the File or View menu (maybe is one of the other ones) there is a option to validate your fonts. You might want to see if your fonts are okay. You should also check for duplicate fonts in your Font Book. Any questions, reply back.

Similar Messages

  • What went wrong with Nokia Messaging?

    What went wrong with Nokia Messaging?
    In the beginning of this year I used Nokia Messaging on E71 and I really loved it!
    Since this autumn I am using it on my new N97 and I am confronted with totally different experience:
    - the application is very slooooow..
    - its unreliable - very ofter emails arrive with hours delay, a sync may take up to minutes
    - its very very buggy - truncated icons, diplay randomly jumping up and down, when scrolling.
    - very bad HTML display of emails - tiny (unreadable) default font and no wrap to screen when zooming - I thought emails were for reading?
    - many, many usability issues
    I just cannot believe it - How has Nokia managed to convert once such a good piece of software into such incredible disaster?
    Recently an update was published - I tried it immediately... To my big disappointment it contains all the same bugs and introduces new ones..
    How is this possible? What is happening at Nokia?

    Also my N86 as the same problem.
    And in global setting Nokia deleted the option to read always in HTML.
    And there is not any option to write html Mails

  • What went wrong ?

    Dear all,
    I`m trying to figure out what went wrong with my database.
    During the higher load the users were suddenly getting DBIF_RSQL_SQL_ERROR, no matter what they wanted to do. When checking system I found many messages like:
    Database error -1000 at OPC access to table REPOLOAD
    > POS(1) Too many lock requests
    > Include ??? line 0000.
    Run-time error "DBIF_REPO_SQL_ERROR" occurred
    Run-time error "DBIF_RSQL_SQL_ERROR" occurred
    Database error -1000 at OPC
    > POS(1) Too many lock requests
    Database error -1000 at OPC
    > POS(1) Too many lock requests
    Database error -1000 at OPC
    > POS(1) Too many lock requests
    Database error -1000 at EXE
    > POS(1) Too many lock requests
    According to documentation I found error -1000:
    1000: Too many lock requests
    Explanation
    There are too many locks or lock requests.
    User Request
    You can try to repeat the SQL statement at a later time or cancel the transaction. If this situation occurs frequently, then the MAXLOCKS general database parameter is too small and should be increased
    Database kernel showed following messages:
    2009-12-07 16:04:18  8126 ERR     5 Catalog  Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
    2009-12-07 16:05:13  8170 ERR     5 Catalog  Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
    2009-12-07 16:10:13  8182 ERR     5 Catalog  Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
    2009-12-07 16:15:09  8229 ERR     5 Catalog  Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
    2009-12-07 16:15:13  8123 ERR     5 Catalog  Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
    So do you think it is just about MAXLOCKS parameter or also with catalog cache sizing could be wrong ?
    Version : MaxDB 7.6.6.7.
    Thank you for your comments.
    Pavol

    > Database error -1000 at OPC
    > > POS(1) Too many lock requests
    > 1000: Too many lock requests
    > Explanation
    > There are too many locks or lock requests.
    > 2009-12-07 16:04:18  8126 ERR     5 Catalog  Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
    > So do you think it is just about MAXLOCKS parameter or also with catalog cache sizing could be wrong ?
    > Version : MaxDB 7.6.6.7.
    Hi there,
    it's really just about the MAXLOCKS setting.
    As you seem the "Catalog update failure"-message also points out error no. -1000.
    It's the same "too many lock requests" error as before.
    Having a MAXLOCKS value of 1.000.000 or even 3.000.000 is not unusual with MaxDB!
    regards,
    Lars

  • My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that  are causing the problem.
    I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
    Kernel Extensions:
              com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
              com.rogueamoeba.InstantOn          Version: 6.0.2
              com.rogueamoeba.InstantOnCore          Version: 6.0.2
              com.Cycling74.driver.Soundflower          Version: 1.5.3
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
                 [not loaded] com.adobe.fpsaud.plist
                 [not loaded] com.adobe.SwitchBoard.plist
                 [not loaded] com.bombich.ccc.plist
                 [not loaded] com.dymo.pnpd.plist
                 [not loaded] com.intego.BackupManagerPro.daemon.plist
                 [not loaded] com.micromat.TechToolProDaemon.plist
                 [not loaded] com.microsoft.office.licensing.helper.plist
                 [not loaded] com.orbicule.witnessd.plist
                 [not loaded] com.sierrawireless.SwitchTool.plist
                 [not loaded] com.stclairsoft.AppTamerAgent.plist
                 [not loaded] org.macosforge.xquartz.privileged_startx.plist
                 [not loaded]          pcloudd.plist
    Launch Agents:
                     [loaded] com.divx.dms.agent.plist
                     [loaded] com.divx.update.agent.plist
                     [loaded] com.epson.epw.agent.plist
                     [loaded] com.lacie.raidmonitor.daemon.plist
                     [loaded] com.lacie.safemanager.daemon.plist
                     [loaded] com.micromat.TechToolProAgent.plist
                     [loaded] com.orbicule.WitnessUserAgent.plist
                     [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
                 [not loaded]          .DS_Store
                     [loaded] com.adobe.AAM.Updater-1.0.plist
                     [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                     [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                     [loaded] com.divx.agent.postinstall.plist
                     [loaded] com.google.keystone.agent.plist
                     [loaded] com.propaganda.dejavu.dvmonitor.plist
                     [loaded] com.valvesoftware.steamclean.plist
                     [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              iTunesHelper
              Synergy
              TomTomHOMERunner
              Dropbox
    3rd Party Preference Panes:
              Déjà Vu
              Flash Player
              Flip4Mac WMV
              GR-55
              Paragon NTFS for Mac ® OS X
              Perian
              Printopia
              TechTool Protection
              Witness

  • My iPod touch 5th Gen iOS 8.1 won't turn on, charge and CONNECT TO iTUNES. Maybe this is because of the new release ios 8.1 where after the update it went recovery mode then i didn't restore, i set up a new ipod. What's wrong? Is ths bcoz of ios 8.1?

    My iPod touch 5th Gen iOS 8.1 won't turn on, charge and CONNECT TO iTUNES.
    Maybe this is because of the new release ios 8.1 where after the update it went
    recovery mode then i didn't restore, i set up a new ipod.
    What's wrong? Is ths bcoz of ios 8.1?

    How do you do that
    lllaass wrote:
    Try:                                               
    - iOS: Not responding or does not turn on          
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • How do i get my apple ID from my old iphone 5 to my new iphone 6 ? what are the steps? because last time i tried getting my apple ID from my old to new phone it all went wrong and i could not sign in or use imessage? thanks

    How do i get my apple ID to work from my old iphone 5 to my new iphone 6? what are the steps? as last time i tried this everything went wrong my imessage would not work and it would not let me sign in?

    Try TransPhone, it's working fine, but a bit expensive...
    After installing this, you'll Be able to send/recieve music, contacts, text messages, photos and Videos over bluetooth. Works fine with all mobile phones and computers...
    I may receive some form of compensation, financial or otherwise, from my recommendation or link
    <Edited by Host>

  • HT1267 While upgrading my iPhone 3 to 4.2 something went wrong and would not start at all. When tried to restore after going through th process it comes up with the message "The iPhone could not be restored. An unknown error occurred [1015]." What can I d

    While upgrading my iPhone 3GS to iOS 4.2 something went wrong and came up with the message "The iPhone could not be restored. An unknown error occurred  [1015]." Now it will not start at all. It just stays on screen with USB and the iTune picture. What can I do to get it going again. I only tried to upgrade because I was prompted to up-grade and now I am helpless. I did a backup before starting the upgrade. The error message did not tell what to do next.  Any help is very much appreciated.

    Usually that means the iPhone was hacked to unlock it from the original
    carrier .
    Updating the operating system locks it back to that original carrier
    You could try this
    http://support.apple.com/kb/TS3281
    However if the iPhone was hacked it is probably a paper weight  now
    and as this is an Apple hosted forum  you can get no further help here

  • All applications were "?" On the dashboard after time machine restore to new hard drive...what went wrong?

    Hi folks
    I used the cmd R option on booting the MBP and did a disk scan and it reported errors that could not be fixed/repaired.
    So I opted to install a brand new 1Tbyte Seagate hybrid hard drive and restore from my time machine backup.
    So I installed the new drive in the MBP...it stated that it needed to restore from the internet and I was treated with a rotating globe for about 10 minutes.
    It then gave the normal restore options and I opened to format the new drive as a mac drive etc...
    Selected the most recent TM backup from USB drive and pointed it to the new formatted HD in the MBP.
    So far so good I thought....it said it was restoring....
    waited about 4.5 hours and apparently it completed when I was out so I did not see any messages just a normal looking mavericks desktop BUT with "?" In the dashboard where all the applications icons should be?????
    I assume something went wrong somewhere so I reinstalled the old HD and restarted TM and it's not starting to backup all 493Gbyte of disk whichI. Understand is normal after a full restore.
    So...what to do now??? I'll wait for the 7 odd hours of TM to complete but how best should I proceed with the new HD etc...should I reinstall and copy mavericks to it from a memory stick and then attempt a new restore from the recent TMS backup? Or will this cause issues....
    I also have an Inateck hard drive cloning device (brand new never used) so I had wondered if I should simply install the old drive and new drives into this and start the cloning mechanism? OR will this simply clone the errors that were reported on the old drive when it was in the MBP?
    In short I'm not sure what to do for the best now and would welcome helpful suggestions as to how to proceed.
    thanks
    Nick

    <<<<UPDATE>>>>
    If at first you don't succeed...
    Last night after the new 493 Gbyte time machine completed. I once again installed the new drive and restarted the MBP ...waited 10 min for the internet to download the basic disk utilities...restarted the restore from TM and waited 6 hours...Happy days it worked perfectly and like a rocket...the old disk had a read write speed of approx 50-60 Mb/s the new one (hybrid drive) measures at 100-110 Mb/s...programmes open and close noticeably faster and it's better than when the MBP was new...
    Apparently this new hybrid drive "learns" frequently used programmes and caches parts that improves start up time etc as time progresses etc...the MBP now starts from cold boot in less than 1 minute compared to 2 plus before...I know minutes should not really matter but it does improve the user experience. I should add I have 16G of RAM installed which does make a difference with Photoshop and Aperture etc.
    Hope this helps others or at least encourages people to try hybrid drives over the much more expensive SSD option.

  • I have been using facetime on my iphone for a while and after the recent, ios update, I cannot seem to use the facetime. What went wrong?

    I have been using facetime on my iphone5 for a while and after the recent IOS update, I cannot seems to use my facetime any longer. what went wrong?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Hard crash - what went wrong?

    After many years of working with pc's I've just had my first hard crash - ever! This is also the first pc I've ever built.... The rig has been up & running for 2 weeks with zero problems. I run Seti on 2 processor threads using SetiHide, resulting in 100% activity. The CPU has the stock Intel fan & ran real hot (69°) until I upgraded the BIOS from v1.2 to v1.9. Last weekend (17/18th), I played with some overclocking, getting up to 215fsb before dropping back to standard earlier this week.
    Can anyone help me diagnose what went wrong please?
    CPU temp 59° full load, 40° idle
    NB temp 54°
    System 38°
    HDD 25°
    System is PIV 3.2gHz/800 HT mode, BIOS v1.9, FSB set to 201, memory voltage 2.65v. Memory is Kingston approved KVR400X64C3AK2/1g in dual channel mode.
    Software: WinXP Pro latest patches, McAfee AV v7.0 Enterprise, Palm Hotsync, MS ISA Firewall, pc linked to Win2k server.
    Software running at the time: Outlook 2003, Setihide (2 processor mode), Musicmatch 8.2 (playing music from hdd), 2x IE6, Commence (relational dbase).
    I was just working typing something in Outlook & it crashed with no warning. The PC had been on for about 10 hours.
    This pc use is normal for me, nothing unusual was being done. The ONLY thing unusual was an hour or so before, I connected my APC UPS to a USB port & therefore running the UPS service. Could that cause the hard crash?
    Steps taken: FSB back to 200, memory voltage back to 2.5v, unloaded UPS service & unplugged the UPS cable, unloaded Seti.
    Next step: run memtest86
    This really messed up my day..  
    Edited CPU idle temp - because shutting SetiHide doesn't shut the Seti processes!

    Vango
    I got back up & running straight away, thanks.
    Running apps are listed in my first post, active windows were:
    Quote
    Outlook 2003, Setihide (2 processor mode), Musicmatch 8.2 (playing music from hdd), 2x IE6, Commence (relational dbase).
    I was using an Outlook new mail window doing a quote for a customer. So I was jumping between IE windows checking prices etc. At the exact point of the crash I was in Outlook typing something. Musicmatch was playing mp3s from my hard drive. Seti was running full blast. Also about an hour previously I had connected an APC 500VA Back-UPS CS to a USB port. This activated the WinXP UPS service, which was not running previously. In fact when I set up computers, I never connect the UPS to the pc - due to problems!  

  • 2710 Blackout! What went wrong?

    Hi, I have a XPS One 2710 (Mid 2012) which have gone blank.
    After some intensive work to get Windows 10 on a separate partition the  computer have ceased to start. Before that I had 8.1 and 10 to choose boot  from. All was well but the morning after nothing worked.
    Can not get into the BIOS with F2, F12 for the ePSA diagnostics does not work either, the black screen blinks a few times and there are only two strokes heard from the harddisk.
    The machine starts with the input from the external HDMI input whether anything is connected or not, and I have picture from another computer with HDMI output. I assume there is no power failure.
     Usually there is no activity light blinking above the power button, but it has had a steady light on one occasion, but never the Dell logo.
    I have resetted the CMOS and changed battery at no avail. Disconnecting the HDD does not change any symptoms. The original service agreement expired six months ago and I have no clue to what is wrong. Is it the CPU, motherboard or memory?
    As the ePSA can not be invoked by F12 I am at a loss here with no clues.
    Does anybody know?

    Thanks for the answer Ron.
    I too think there would be a hassle to find out what would fit inside this 2710. I suggested to change the motherboard myself and if there was a clear upgrade path for this chassis, a new motherboard. I therefore decided to use the 500 GB SSD as my own upgrade path, and it all went very well when the computer was returned OK.
    I have an Operating Systems disc which Dell sent me a long time ago and the computer was now returned with a new Windows Product Key and I made a clean install.
    I enabled Secure Boot , UEFI and ACHI in BIOS and the installation was smooth and quite fast. Maybe I should have enabled the SSD with more of its features like Overprovisioning, OS Optimization and the RAPID function for a really fast experience, but it was done on another computer and I did not know how much would carry over. Anyway there is this formatting during the install...
    I am now very satisfied with this very quiet and responsive 2710 and I can recommend a change from a HDD to an SSD. There have been some inspiring threads on the subject in this forum. Thanks.

  • WWW (What Went Wrong)? Gnome & much more...

    The day after I played with some mono-based apps (desktop-drapes, greent, and perhaps something else) I got a strange behaviour with gnome, even for a  brand-new user.
    I guess something went wrong with Xorg or gconf, as
    - in gnome menu icons do not show up any more
    - on the whole desktop keypress repetition doesn't work (and if I enable it from gnome settings, what I obtain is eg. a double "aa" each time a press the "a" key and nothing more)
    - gnome theme settings complain about missing schema for Metacity default theme and won't start
    - keybindings which include the Ctrl key do not work (as tab switching in gnome-terminal)
    and various other things
    What can I do to fix things?

    Generally speaking, the only times I've had GConf go whacky on me (and I originally suspected Gnome as the culprit, too) were when my hard drive was failing. I've had some bad luck with my last two hard drives (one SATA controller burned up when my laptop overheated and another was Maxtor... i.e. bad). I'd run some diagnostics on your hard drive just to be sure that your problems aren't merely symptoms of a larger issue. Any time you're missing files, have strange and unrelated runtime issues or experience multiple corrupted files, there's reason to suspect your hard drive or memory.
    Hope that helps
    Last edited by god (2007-04-04 02:19:14)

  • What went wrong, help p

    since the zen micro is only more than a week new, i waited for the battery to drain and waited for the low batt indicator before i charged it via usb... but when i plugged it in, there was no light indicator although there is a charging bar... worse, when i checked at the zen micro explorer, it said that the device was not connected... finally, i decided to take out the battery and go to rescue mode but then it said "low battery" so i just proceeded to turn it on and finally the blinking light was there and the explorer could detect it...
    what i would like to know is what made my micro act up like that? i was slightly panicky since my bundled ac adaptor is faulty, but it was the first time i encountered the problem with my usb... so what went wrong so that i could avoid it in the near future? thanks for your replies for this wonderful site...

    If the supplied AC adapter is faulty, and you've only had the kit a week, Customer Support should be able to replace the adapter for you under warranty.
    As for the other problem goes, I don't have much to add to SSR's advice. It could have been that it wasn't connecting properly, could be a few things, but if it doesn't happen again it was probably just a fluke occurance so I wouldn't be too concerned.
    Cat

  • What went wrong? misuse? abuse?

    ive had my iphone for sometime now, bought it back in june of 2009... had some problems, it was replaced the last time...
    about a week ago i had been running around from work and other places with no real time to charge my phone, it had gone dead before i got home to charge it, no big deal as this wasnt the first time... i charge it all friday night and didnt use it until sunday, went to use it sunday and it wouldnt power on... i try it again and again, still not working... i call apple support the say its the battery, they send a box and i pay $80 to have this replaced...
    i wait 4 days and still hear nothing, the status hasnt been updated online, i call and they say that it wasnt the battery and that it was a hardware issue and they were going to send me a replacement phone, which was ok with me as long as the problem was solved... said the phone would be here the following day...
    today i get an email stating this:
    Your IPHONE 3GS has been inspected by Apple technicians, who have determined that it has been subjected to accidental damage or misuse, which is not covered by the warranty or an Apple service contract. Therefore your original product is being returned to you unrepaired. You should expect to receive it within two business days along with a letter that gives details of this assessment. Apple will send you a separate email to indicate that this service request is complete and to provide the tracking information for the shipment.
    what went wrong is all i want to know, i know i didnt drop this phone at all, i know for sure it was never subject to misuse or abuse, let alone anywhere close to water to have any kind of water damage.. So now im getting my old phone back that will not power on... what am i suppose to do with that?

    Call iPhone support at 800-myiphone. Let them know you sent your phone in for service and it was returned to you stating it had liquid damage. Tell them you've checked the indicators and they are not tripped. The Advisor on the phone can check the pics that were taken of your phone when it was sent it to confirm this. If this is the case they can note this in the system and override it and you can send it back in for warranty.
    If they are tripped you can still send it in and have them check the internal sensors vs. the outer. Apple has recently changed their policy to warranty devices with liquid damage as long as the INTERNAL sensors are not tripped, only the externals.

  • What went wrong with burning?

    I wanted to burn an iTunes folder (some 1000 songs, 4GB) into a DVD disc so I highlighted the iTunes folder and clicked the button Burn Disc on bottom right corner of the iTunes window. However, only 88 songs (or 300MB) of music was burned into a DVD disc. I did it again; the same thing. For some reasons, more than 900 songs or 3.7GB of music was never burned into a DVD disc.
    What went wrong?
    Jacques

    Are all of the songs you want to burn to DVD in the same playlist? Are the checkboxes in front of all the songs checked? These are the first things I would investigate.

Maybe you are looking for

  • PO qty and Value with Inbound Delivery qty

    Dear all i have a report requirement, client wants to have a report on the basis of Inbound delivery qty. for eg. If Po qty is 100 @ $10.00 each Total Po value = $1000 if he makes a inbound delivery of 20 qty Report should display outstanding deliver

  • Exporting Subtitle from DVD Studio Pro

    Is there a way to export subtitles from DVD Studio Pro or Is there a tool somewhere that will generate an STL file from a DVD Studio Pro subtitle stream? Thanks for your help!

  • Cant see my mac on my xbuntu box

    I would like to get file sharing between my os x 10.4 box and my xubuntu box working right. At present time I can mount a xubuntu shared folder on my mac but I cannot get it to work the other way, any ideas? Note: My xubuntu machine is actually Ubunt

  • Clipping mask fail

    Hi there, I have just received a poster back from the printer and have noticed the edge of the clipping mask of the artwork has printed. The graphics consisted of an image (placed as a CMYK tiff) and plain vector graphics over the top in some parts. 

  • Screen/freezing issues?

    So i've had my phone since this past monday (9/17/07) and every once in awhile the screen will go slightly black (still backlit but blank) when i wake the phone from it's auto lock or when I got to lock it. Also sometimes when I switch apps it do thi